A joint coordinate system proposal for the study of the trapeziometacarpal joint kinematics.

abstract：:A three-dimensional finite element model is developed for the simulation of the sound transmission through the human auditory periphery consisting of the external ear canal, middle ear and cochlea. The cochlea is modelled as a straight duct divided into two fluid-filled scalae by the basilar membrane (BM) having an or...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Wang X,Wang L,Zhou J,Hu Y

更新日期：2014-08-01 00:00:00

abstract：:Local oxygen lack in arterial walls (hypoxia) plays a very important role in the initiation, progression and development of intimal hyperplasia (IH) and thrombosis. Aiming to find out whether a helical-type artery bypass graft (ABG) is hypoxia beneficial, a numerical study was carried out to compare oxygen transport b...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Zheng T,Wen J,Jiang W,Deng X,Fan Y

更新日期：2014-04-01 00:00:00

abstract：:Computational models are increasingly being used to investigate the mechanical properties of cardiac tissue. While much insight has been gained from these studies, one important limitation associated with computational modeling arises when using in vivo images of the heart to generate the reference state of the model....

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Nikou A,Dorsey SM,McGarvey JR,Gorman JH 3rd,Burdick JA,Pilla JJ,Gorman RC,Wenk JF

更新日期：2016-12-01 00:00:00

abstract：:A parametric investigation was conducted to determine the effects on the load estimation method of varying: (1) the thickness of back-plates used in the two-dimensional finite element models of long bones, (2) the number of columns of nodes in the outer medial and lateral sections of the diaphysis to which the back-pl...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Bona MA,Martin LD,Fischer KJ

更新日期：2006-08-01 00:00:00

abstract：:The 2D shape of the lumbar spine in the sagittal plane can be determined from lordosis angles measured between the corresponding end-plates of the vertebral bodies or by using an active shape model (ASM) of the vertebral body outline. The ASM was previously shown to be a more efficient and reliable method, but its acc...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Ali AH,Cowan AB,Gregory JS,Aspden RM,Meakin JR

更新日期：2012-01-01 00:00:00

abstract：:The present paper describes a geometrically and physically nonlinear continuum model to study the mechanical behaviour of passive and active skeletal muscle. The contraction is described with a Huxley type model. A Distributed Moments approach is used to convert the Huxley partial differential equation in a set of ord...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Gielen AW,Oomens CW,Bovendeerd PH,Arts T,Janssen JD

更新日期：2000-01-01 00:00:00

abstract：:It is challenging to measure the finger's kinematics of underlying bones in vivo. This paper presents a new method of finger kinematics measurement, using a geometric finger model and several markers deliberately stuck on skin surface. Using a multiple-view camera system, the optimal motion parameters of finger model ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Chang CW,Kuo LC,Jou IM,Su FC,Sun YN

更新日期：2013-01-01 00:00:00

abstract：:The labrum contributes to passive glenohumeral joint stability. Cadaveric studies have demonstrated that this has position and load dependency, which has not been quantified under physiological loads. This study aims to validate subject-specific finite element (FE) models against in vitro measurements of joint stabili...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Klemt C,Nolte D,Grigoriadis G,Di Federico E,Reilly P,Bull AMJ

更新日期：2017-11-01 00:00:00

abstract：:To analyze the biomechanical effect of syndesmotic screw through three and four cortices, a total of 12 finite element models simulating healthy ankles, tibiofibular syndesmosis injured ankles, and post-operative ankles by screw fixations through three or four cortices were built. A set of biomechanical data were obta...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Li H,Chen Y,Qiang M,Zhang K,Jiang Y,Zhang Y,Jia X

更新日期：2018-04-01 00:00:00

abstract：:Big data and its approaches are generally helpful for healthcare and biomedical sectors for predicting the disease. For trivial symptoms, the difficulty is to meet the doctors at any time in the hospital. Thus, big data provides essential data regarding the diseases on the basis of the patient's symptoms. For several ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Ampavathi A,Saradhi TV

更新日期：2021-01-11 00:00:00

abstract：:Musculoskeletal finite element analysis (FEA) has been essential to research in orthopaedic biomechanics. The generation of a volumetric mesh is often the most challenging step in a FEA. Hexahedral meshing tools that are based on a multi-block approach rely on the manual placement of building blocks for their mesh gen...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Ramme AJ,Shivanna KH,Magnotta VA,Grosland NM

更新日期：2011-10-01 00:00:00

abstract：:In this paper, a qualitative comparison between two types of dental implants with respect to their behaviour under immediate loading is presented. This analysis has been carried out using the finite element method. Since micromotions (and not the load) are responsible of the appearance of a fibrous interface avoiding ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Pérez del Palomar A,Arruga A,Cegoñino J,Doblaré M

更新日期：2005-02-01 00:00:00

abstract：:The extracellular matrix (ECM) provides structural and biochemical support to cells and tissues, which is a critical factor for modulating cell dynamic behavior and intercellular communication. In order to further understand the mechanisms of the interactive relationship between cell and the ECM, we developed a three-...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Dong S,Huang Z,Tang L,Zhang X,Zhang Y,Jiang Y

更新日期：2017-07-01 00:00:00

abstract：:Finite element analysis provides a means of describing cellular mechanics in tissue, which can be useful in understanding and predicting physiological and pathological changes. Many prior studies have been limited to simulations of models containing single cells, which may not accurately describe the influence of mech...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Bennetts CJ,Sibole S,Erdemir A

更新日期：2015-01-01 00:00:00

abstract：:The purpose of this study was to identify one or more performance-based criteria that may be used to generate predictive optimal control simulations of submaximal pedaling. Two-legged pedaling simulations were generated based on minimizing muscle activation, muscle stress, metabolic energy, time derivative of muscle f...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Gidley AD,Marsh AP,Umberger BR

更新日期：2019-01-01 00:00:00

abstract：:The biomechanical effect of tensioning the lumbar fasciae (LF) on the stability of the spine during sagittal plane motion was analysed using a validated finite element model of the normal lumbosacral spine (L4-S1). To apply the tension in the LF along the direction of the fibres, a local coordinate was allocated using...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Choi HW,Kim YE

更新日期：2017-10-01 00:00:00

abstract：:Transcatheter aortic valve replacement (TAVR) strongly depends on the calcification patterns, which may lead to a malapposition of the stented valve and complication onsets in terms of structure kinematics and paravalvular leakage (PVL). From one anatomical-resembling model of the aortic root, six configurations with ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Luraghi G,Matas JFR,Beretta M,Chiozzi N,Iannetti L,Migliavacca F

更新日期：2020-09-14 00:00:00

abstract：:The presence of a spiral arterial blood flow pattern in humans has been widely accepted. It is believed that this spiral component of the blood flow alters arterial haemodynamics in both positive and negative ways. The purpose of this study was to determine the effect of spiral flow on haemodynamic changes in aorta-re...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Javadzadegan A,Simmons A,Barber T

更新日期：2016-01-01 00:00:00

abstract：:A clear and rigorous definition of muscle moment-arms in the context of musculoskeletal systems modelling is presented, using classical mechanics and screw theory. The definition provides an alternative to the tendon excursion method, which can lead to incorrect moment-arms if used inappropriately due to its dependenc...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Ingram D,Engelhardt C,Farron A,Terrier A,Müllhaupt P

更新日期：2015-01-01 00:00:00

abstract：:Oral cancer surgery has a negative influence on the quality of life (QOL). As a result of the complex physiology involved in oral functions, estimation of surgical effects on functionality remains difficult. We present a user-friendly biomechanical simulation of tongue surgery, including closure with suturing and scar...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Kappert KDR,van Alphen MJA,van Dijk S,Smeele LE,Balm AJM,van der Heijden F

更新日期：2019-06-01 00:00:00

abstract：:Biomechanical imaging techniques have been developed for soft tissue characterisation and detection of breast tumours. Harmonic motion imaging (HMI) uses a focused ultrasound technology to generate a harmonic radiation force in a localised region inside a soft tissue. The resulting dynamic response is used to map the ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Zhao X,Pelegri AA

更新日期：2014-01-01 00:00:00

abstract：:A novel, coarse-grained, single-framework 'Eulerian' model for blood flow in the microvascular circulation is presented and used to estimate the variations in flow properties that accrue from all of the following: (i) wall position variation, associated with the endothelial cells' (ECs) shape, (ii) glycocalyx layer (G...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Pontrelli G,Halliday I,Spencer TJ,König CS,Collins MW

更新日期：2015-01-01 00:00:00

abstract：:This work presents a biomechanical study of myringosclerosis (MS), an abnormal condition of the ear that produces calcification of the lamina propria of the eardrum. The study researched the transfer of sound to the stapes depending on the localization, dimension and calcification degree of the MS plaques. Results wer...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Berdich K,Gentil F,Parente M,Garbe C,Santos C,Paço J,Natal Jorge RM,Martins P,Faur N

更新日期：2016-02-01 00:00:00

abstract：:The goal of this study was to define the effect on hip contact forces of including subject-specific moment generating capacity in the musculoskeletal model by scaling isometric muscle strength and by including geometrical information in control subjects, hip osteoarthritis and total hip arthroplasty patients. Scaling ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Wesseling M,De Groote F,Meyer C,Corten K,Simon JP,Desloovere K,Jonkers I

更新日期：2016-11-01 00:00:00

abstract：:An appropriate method of application of the hip-joint force and stress analysis of the pelvic bone, in particular the acetabulum, is necessary to investigate the changes in load transfer due to implantation and to calculate the reference stimulus for bone remodelling simulations. The purpose of the study is to develop...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Ghosh R,Pal B,Ghosh D,Gupta S

更新日期：2015-01-01 00:00:00

abstract：:A critical point in models of the human limbs when the aim is to investigate the motor control is the muscle model. More often the mechanical output of a muscle is considered as one musculotendon force that is a design variable in optimization tasks solved predominantly by static optimization. For dynamic conditions, ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Raikova R,Aladjov H

更新日期：2003-06-01 00:00:00

abstract：:In some cases of aortic valve leaflet disease, the implant of a stentless biological prosthesis represents an excellent option for aortic valve replacement (AVR). In particular, if compared with the implant of mechanical valves, it provides a more physiological haemodynamic performance and a reduced thrombogeneticity,...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Auricchio F,Conti M,Ferrara A,Morganti S,Reali A

更新日期：2014-01-01 00:00:00

abstract：:Mutual information (MI)-based registration, which uses MI as the similarity measure, is a representative method in medical image registration. It has an excellent robustness and accuracy, but with the disadvantages of a large amount of calculation and a long processing time. In this paper, by computing the medical ima...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Pan M,Tang J,Xiong Q

更新日期：2012-01-01 00:00:00

abstract：:Convective transports in the vertebral end plate (VEP) play a significant role in the homeostasis of the spine. A few studies hypothesised that the hydraulic resistance or effective permeability of the VEP could be dependant upon fluid-flow direction. Results were influenced by species, region of interest within the e...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Swider P,Accadbled F,Laffosse JM,Sales de Gauzy J

更新日期：2012-01-01 00:00:00

abstract：:The drug-eluting stent (DES) has become the gold standard worldwide for the treatment of cardiovascular diseases. In recent years, an innovative variation of the DES with micro-sized drug reservoirs has been introduced. It allows programmable drug delivery with both spatial and temporal control and has several potenti...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Hsiao HM,Chiu YH

更新日期：2013-01-01 00:00:00