Abstract:
:Retinal pigment epithelial (RPE) cellular morphology and function are vital to the health of the retina. In age-related macular degeneration, RPE dysfunction and changes in Bruch's membrane occur. Thus, a potential cure is a dual-layer biomimetic transplant consisting of a layer of healthy RPE cells cultured on a support membrane. In this study, we investigated human anterior lens capsule as a replacement for Bruch's membrane and also explored different seeding methods as ways of inducing the desired cellular morphology and function. Using in vitro assays, we demonstrated that RPE cells cultured on lens capsule exhibited epithelial characteristics, such as the presence of actin belts and the formation of tight junctions in the monolayer. Bovine photoreceptor outer segments were also incubated with the RPE cells in order to quantify the binding and ingestion activity of the RPE cells. With these assays, we determined that cells seeded by centrifugation appeared to possess the most epithelial-like morphology, with the shortest overall length and the smallest elongation. They also exhibited enhanced metabolic activity, with a 1.5-fold increase over conventional gravity seeding. Thus, the spatial cues provided by centrifugation may assist cells in assuming native RPE function. Therefore, a dual-layer transplant, with RPE cells organized by centrifugation onto lens capsule, appears promising in achieving native retinal function.
journal_name
Biomaterialsjournal_title
Biomaterialsauthors
Lee CJ,Fishman HA,Bent SFdoi
10.1016/j.biomaterials.2007.01.018subject
Has Abstractpub_date
2007-04-01 00:00:00pages
2192-201issue
13eissn
0142-9612issn
1878-5905pii
S0142-9612(07)00041-5journal_volume
28pub_type
杂志文章相关文献
BIOMATERIALS文献大全abstract::This study examined the engineering and true axial stress-strain behavior of smooth cylindrical and shallow and deep notched cylindrical test specimens, under applied axial tensile loading using non-contacting methods, of both conventional and highly crosslinked ultra-high molecular weight polyethylenes (UHMWPEs). The...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2004.09.031
更新日期:2005-06-01 00:00:00
abstract::One of the main issues in orthopaedic implant design is the fabrication of scaffolds that closely mimic the biomechanical properties of the surrounding bone. This research reports on a multi-stage rapid prototyping technique that was successfully developed to produce porous titanium scaffolds with fully interconnected...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2008.05.032
更新日期:2008-09-01 00:00:00
abstract::The use of non-viral nanoparticulate systems for the delivery of therapeutic agents is receiving considerable attention for medical and pharmaceutical applications. This increasing interest results from the fact that these systems can be designed to meet specific physicochemical requirements, and they display low toxi...
journal_title:Biomaterials
pub_type: 杂志文章,评审
doi:10.1016/j.biomaterials.2005.05.044
更新日期:2005-12-01 00:00:00
abstract::Microspheres comprised of particulate hydroxyapatites dispersed in fibrous collagen matrices were prepared. The procedure involved the droplet formation of hydroxyapatite/collagen mixture emulsified in olive oil, followed by the reconstitution of collagen in the presence of hydroxyapatite particles at 37 degrees C. Va...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(99)00095-2
更新日期:1999-10-01 00:00:00
abstract::The aim of the present study was to test the hypothesis that oligonucleotides can be used for anchorage and slow release of osteogenic growth factors such as BMP to enhance the osteogenic activity of a titanium implant surface. Strands of 60-mer non-coding DNA oligonucleotides (ODN) were bound to an acid-etched sandbl...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2011.10.027
更新日期:2012-02-01 00:00:00
abstract::Three-dimensional (3D) culture of hepatocytes leads to improved and prolonged synthetic and metabolic functions, but the underlying molecular mechanisms are unknown. In order to investigate the role of 3D cell-cell interactions in maintaining hepatocyte differentiated functions ex vivo, primary mouse hepatocytes were ...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2013.11.063
更新日期:2014-02-01 00:00:00
abstract::Aberrant regulation of angiogenesis supply sufficient oxygen and nutrients to exacerbate tumor progression and metastasis. Taking this hallmark of cancer into account, reported here is a self-monitoring and triple-collaborative therapy system by auto-fluorescent polymer nanotheranostics which could be concurrently aga...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2018.12.021
更新日期:2019-02-01 00:00:00
abstract::Cationic polymer PEI-CyD is doped with Nd by plasma technology to produce the gene vector: Nd@PEI-CyD. Luciferase expression and EGFP transfection experiments performed in vitro reveal that Nd@PEI-CyD has significantly higher transfection efficiency than lipofectamine 2000 and PEI-CyD and the mechanism is studied and ...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2013.09.069
更新日期:2014-01-01 00:00:00
abstract::Bioelectrical phenomenon in natural bone has been well recognized for its role in bone development and fracture healing. For example, the piezoelectricity induced modulation in cellular functionality assists in the repair and regeneration of bone tissue. Against this backdrop, we review here the origin of dielectric a...
journal_title:Biomaterials
pub_type: 杂志文章,评审
doi:10.1016/j.biomaterials.2020.120280
更新日期:2020-11-01 00:00:00
abstract::Tubular vessels for tissue engineering are typically fabricated using a molding, dipping, or electrospinning technique. While these techniques provide some control over inner and outer diameters of the tube, they lack the ability to align the polymers or fibers of interest throughout the tube. This is an important asp...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2008.08.025
更新日期:2008-12-01 00:00:00
abstract::The continuous release of nitric oxide (NO) by the native endothelium of blood vessels plays a substantial role in the cardiovascular physiology, as it influences important pathways of cardiovascular homeostasis, inhibits vascular smooth muscle cell (VSMC) proliferation, inhibits platelet activation and aggregation, a...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2015.06.016
更新日期:2015-09-01 00:00:00
abstract::Poly(3, 4-ethylenedioxythiophene)-coated carbon microfibers (PEDOT-MFs) hold promise for developing advanced neuroprostheses and neural repair devices. We investigated the chronic cellular responses to PEDOT-MFs implanted into the uninjured and the transected rat spinal cord, and compared the effects of polymer surfac...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2016.02.037
更新日期:2016-05-01 00:00:00
abstract::Low molecular weight polyurethanes with sites for metal complexation were synthesized. The -SO(2) and the -COOH groups were incorporated into the polyurethane chain by the reactions of tri-functional monomers, 4,4'-bis(hydroxyphenyl)sulfone and 4,4'-bis(hydroxyphenyl) valeric acid with hexa-methylene di-isocyanate (HM...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2003.11.044
更新日期:2004-08-01 00:00:00
abstract::The phosphoinositide 3-kinase/Akt1 signaling pathway has emerged as a target for cancer therapy. In this study, we aimed to develop a strategy to enhance Akt-targeted cancer therapy. We hypothesized that combination of Akt1-targeted therapy with conventional chemotherapy using paclitaxel-incorporated conjugated linole...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2011.12.011
更新日期:2012-03-01 00:00:00
abstract::Polylactide (PLA) microspheres were coated with collagen for cell culture and injectable cell carriers. Utilizing a method of emulsion-solvent evaporation, PLA microspheres with diameter ranging from 180 to 280 microm were prepared, followed with aminolysis in hexanediamine/n-propanol solution to introduce free amino ...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2005.03.038
更新日期:2005-11-01 00:00:00
abstract::Nitric oxide (NO) is an important biological messenger involved in the treatment of bacterial infections, but its controlled and targeted release in bacterial infections remains a major challenge. Herein, an intelligent NO nanogenerator triggered by near-infrared (NIR) light is constructed for targeted treatment of P....
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2020.120588
更新日期:2021-01-01 00:00:00
abstract::A limitation with the use of polymers as stent matrices is their inherent mechanical weakness. In this study, a polymeric stent, made from chitosan-based films fixed by genipin which has a cyclic molecular structure, was developed (the genipin stent). The mechanical properties of the genipin stent were investigated; i...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2009.06.039
更新日期:2009-10-01 00:00:00
abstract::There are many ways to influence cell activities, and biomaterials with functional groups attached is an attractive method that clearly has the ability to modulate cell behavior. The evidence is clear that biomaterials, with or without growth factors and cells, have resulted in numerous products for the regenerative m...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2011.02.028
更新日期:2011-06-01 00:00:00
abstract::As synergistic photothermal immunotherapy has developed as one of the most attractive strategies for cancer therapy, it is crucial to design an effective photothermal immunotherapy system to enhance the synergistic anti-tumor effect and reveal the essential role of each treatment. In this study, we designed CpG self-c...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2019.04.024
更新日期:2019-07-01 00:00:00
abstract::We developed cell-free implants, comprising carbodiimide crosslinked recombinant human collagen (RHC), to enable corneal regeneration by endogenous cell recruitment, to address the worldwide shortage of donor corneas. Patients were grafted with RHC implants. Over four years, the regenerated neo-corneas were stably int...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2013.11.079
更新日期:2014-03-01 00:00:00
abstract::Notorious bacterial biofilms are becoming severe threats to public health worldwide. As the important component in biofilm extracellular polymeric substances (EPS), extracellular DNA (eDNA) has been manifested to connect different EPS components and bacteria together, leading biofilms hard to eliminate. Herein a serie...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2019.04.007
更新日期:2019-07-01 00:00:00
abstract::Poly(L-lactide) (PLLA) with an extremely high molecular weight (Mv up to 1 X 10(6)) was synthesized at a low catalyst concentration (0.015 wt%) and temperatures between 100-110 degrees C. Besides good mechanical properties the as-polymerized PLLA exhibited a microporous structure. Plates and screws of this material we...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/0142-9612(87)90034-2
更新日期:1987-01-01 00:00:00
abstract::In the stem-cell niche, the extracellular matrix (ECM) serves as a structural support that additionally provides stem cells with signals that contribute to the regulation of stem-cell function, via reciprocal interactions between cells and components of the ECM. Recently, cell-derived ECMs have emerged as in vitro cel...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2017.03.008
更新日期:2017-06-01 00:00:00
abstract::The early biological response at titanium (Ti), copper (Cu)-coated Ti and sham sites was evaluated in an in vivo rat model. Material surface chemical and topographical properties were characterized using Auger electron spectroscopy, energy dispersive X-ray spectroscopy and interferometry, respectively. The number of l...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2004.02.066
更新日期:2005-02-01 00:00:00
abstract::Polyethylene terephthalate (PET), ethylene-vinyl alcohol copolymer (EVOH) and Nylon 6 in plate form were treated with silane-coupling agents, a titanium alkoxide-alcohol solution and a hot HCl solution to form a thin crystalline titanium oxide layer. When placed in a simulated body fluid with ion concentrations nearly...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2005.10.004
更新日期:2006-03-01 00:00:00
abstract::Endothelial cells derived from the bovine pulmonary artery (line CPAE, CCL 209, American Tissue Culture Collection, Rockville, MD, USA) were cultured on pristine or fluorine ion-irradiated polystyrene (5 x 10(12) or 5 x 10(14) F ions/cm2, 150 keV). At 24-h post-seeding interval, the number of cells which adhered to th...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(00)00009-0
更新日期:2000-06-01 00:00:00
abstract::Although silicones possess many useful properties as biomaterials, their hydrophobicity can be problematic. To a degree, this issue can be addressed by surface modification with hydrophilic polymers such as poly(ethylene glycol), but the resulting structures are usually not conducive to cell growth. In the present wor...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2010.01.069
更新日期:2010-05-01 00:00:00
abstract::Adipose tissue engineering offers a promising alternative to the current breast reconstruction options. Here we investigated patient-specific breast scaffolds fabricated from poly(d,l)-lactide polymer with pore sizes>1 mm for their potential in long-term sustained regeneration of high volume adipose tissue. An optimis...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2015.01.025
更新日期:2015-06-01 00:00:00
abstract::Very elastic poly(L-lactide-co-epsilon-caprolactone) (PLCL) (50:50) copolymer blended with gelatin was electrospun into microfibers from a hexafluoroisopropanol solution. PLCL fiber sheet exhibited the unique soft and flexible behavior while gelatin fiber was hard and brittle. As the gelatin content of PLCL/gelatin fi...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2007.12.029
更新日期:2008-04-01 00:00:00
abstract::Pancreatic islet transplantation is one of the most promising strategies for patients suffering from type 1 diabetes mellitus, but several therapeutic immunosuppressive medications must be administered simultaneously to protect transplanted islets in the long-term, and these expose patients to the risk of serious comp...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2006.12.015
更新日期:2007-04-01 00:00:00