Abstract:
:The in vitro response in simulated body fluid (SBF) of silicate glass coatings on Ti6A14V was evaluated. Glasses belonging to the SiO2-CaO-MgO-Na2O-K2O-P2O5 system were used to prepare 50-70 m thick coatings on Ti6Al4V, employing a simple enameling technique. Glasses with silica content higher than 55 wt% can be used to prepare coatings that do not crack or delaminate and exhibit good adhesion to the alloy. It has been found that coatings with silica content lower than 60 wt% are more susceptible to corrosion and precipitate carbonated hydroxyapatite on their surface during in vitro tests. However, these coatings have a higher thermal expansion than the metal and are under tension. After 2 months in SBF cracks grow in the coating that reach the glass/metal interface and initiate delamination. Glasses with silica content higher than 60 wt% are more resistant to corrosion and have lower thermal expansion. These coatings do not crack but they do not precipitate apatite even after 2 months in SBF.
journal_name
Biomaterialsjournal_title
Biomaterialsauthors
Saiz E,Goldman M,Gomez-Vega JM,Tomsia AP,Marshall GW,Marshall SJdoi
10.1016/s0142-9612(02)00109-6keywords:
subject
Has Abstractpub_date
2002-09-01 00:00:00pages
3749-56issue
17eissn
0142-9612issn
1878-5905pii
S0142-9612(02)00109-6journal_volume
23pub_type
杂志文章相关文献
BIOMATERIALS文献大全abstract::Complement activation by polymeric gene and drug delivery systems has been overlooked in the past. As more reports appear in the literature concerning immunogenicity of polymers and their impact on gene expression patterns, it is important to address possible immune side effects of polymers, namely complement activati...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2011.03.035
更新日期:2011-07-01 00:00:00
abstract::The polymerization of N,N' carbonylbis (caprolactam) (CBC) and polyol in the presence of alcoholate as catalyst produced cross-linked poly(ester-urea)s via ring opening addition reaction. In contrast to conventional synthetic routes, the use of non-toxic CBC eliminates the need for toxic isocyanate-based monomers. The...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2003.09.110
更新日期:2004-06-01 00:00:00
abstract::The ability to manipulate and control the surface properties, without altering the substrate properties, is of crucial importance in the designing of biomedical materials. In this work, surface-initiated atom transfer radical polymerization (ATRP) is employed to tailor the functionality of polycaprolactone (PCL) film ...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2010.01.032
更新日期:2010-04-01 00:00:00
abstract::The aim of this study was to determine the biocompatibility and osteoconductive potential of a high-strength canasite glass ceramic. Glass-ceramic rods were produced using the lost-wax casting technique and implanted in the mid-shafts rabbit femurs. Implants were harvested at 4, 13 and 22 weeks and prepared for light ...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(01)00417-3
更新日期:2002-07-01 00:00:00
abstract::Well-characterised human osteoblastic bone marrow cell cultures are a useful in vitro tool to analyse bone tissue/biomaterials interactions. In this work, human bone marrow was cultured in experimental conditions described to favour osteoblastic differentiation and, serially passaged cells were cultured in two widely ...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(99)00284-7
更新日期:2000-06-01 00:00:00
abstract::Periosteum plays a pivotal role in vascularization, ossification and remodeling during the healing process of bone injury. However, there are few studies focused on the construction of artificial implants with periosteum-mimetic effect. To emulate the primary role of natural periosteum or endosteal tissues in bone reg...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2020.120561
更新日期:2021-01-01 00:00:00
abstract::Covalent immobilization of cell-adhesive proteins such as collagen and fibronectin on to the surface of poly(vinyl alcohol) hydrogel was investigated by using diisocyanates, polyisocyanates, and cyanogen bromide. It was found that 0.5 and 12 micrograms/cm2 of collagen were immobilized on to the surface by using hexame...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/0142-9612(91)90024-5
更新日期:1991-10-01 00:00:00
abstract::Cell sheet technology has emerged as an important tissue engineering approach. Adipose-derived stem cells (ASCs) have valuable applications in regenerative medicine, but their stemness and differentiation capabilities in the cell sheet format have not been well investigated. In this study, we found that l-ascorbate 2-...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2014.01.015
更新日期:2014-04-01 00:00:00
abstract::Polyetheretherketone-hydroxyapatite composites were developed as alternative materials for load-bearing orthopedic applications. The amount of hydroxyapatite (HA) incorporated into the polyetheretherketone (PEEK) polymer matrix ranges from 5 to 40 vol% and these materials were successfully fabricated by injection mold...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(03)00028-0
更新日期:2003-06-01 00:00:00
abstract::An artificial receptor for creatinine was synthesized by the method of molecularly imprinted polymer (MIP). beta-Cyclodextrin was used as a monomer cross-linked with epichlorohydrin in the presence of creatinine, which was a template for the imprinting. Different molar ratios of monomer to template were used to synthe...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2004.07.037
更新日期:2005-05-01 00:00:00
abstract::Here we document the complete process of bioresorption and bone replacement of rods made of forged composites of unsintered hydroxyapatite particles/poly l-lactide (F-u-HA/PLLA) implanted in the femoral medullary cavities of rabbits. Bioresorption, osteoconductive bioactivity and bone replacement were compared in thre...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2005.02.016
更新日期:2005-09-01 00:00:00
abstract::Traditional therapeutic interventions against abnormal gene expression in disease states at the level of expressed proteins are becoming increasingly difficult due to poor selectivity, off-target effects and associated toxicity. Upstream catalytic targeting of specific RNA sequences offers an alternative platform for ...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2016.09.033
更新日期:2017-01-01 00:00:00
abstract::Targeted therapy is needed for hepatitis B virus (HBV)-mediated hepatocellular carcinoma (HCC) which shows overexpression of HBV surface antigen (HBsAg). We previously developed scFv15, a human single-chain antibody against HBsAg. Here we tested the strategic feasibility of scFv15-mediated delivery of apoptotic effect...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2013.03.046
更新日期:2013-07-01 00:00:00
abstract::During organogenesis groups of differentiating cells self-organize into a series of structural intermediates with defined architectural forms. Evidence is emerging that such architectural forms are important in guiding cell fate, yet in vitro methods to guide cell fate have focused primarily on un-patterned exposure o...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2020.120128
更新日期:2020-09-01 00:00:00
abstract::The large surface area of highly porous titanium structures produced by additive manufacturing can be modified using biofunctionalizing surface treatments to improve the bone regeneration performance of these otherwise bioinert biomaterials. In this longitudinal study, we applied and compared three types of biofunctio...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2014.04.054
更新日期:2014-08-01 00:00:00
abstract::Human induced pluripotent stem cell (hiPSC) derived angiogenesis models present a unique opportunity for patient-specific platforms to study the complex process of angiogenesis and the endothelial cell response to biomaterial and biophysical changes in a defined microenvironment. We present a refined method for differ...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2018.11.032
更新日期:2019-02-01 00:00:00
abstract::Understanding how nanovectors transport DNA molecules through cell membranes is of great importance in gene therapy. In this paper, we systematically investigate the mechanism of cellular uptake of cationic polymeric nanovectors containing DNA molecules through dissipative particle dynamics simulations. Our results sh...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2013.06.067
更新日期:2013-11-01 00:00:00
abstract::In the present study, we tested the hypothesis that electroporation-mediated transfer of Runx2, Osterix, or both genes enhances the in vitro and in vivo osteogenesis from adipose stem cells (ASCs). ASCs were transfected with Runx2, Osterix, or both genes using electroporation, and further cultured in monolayer or in P...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2010.09.042
更新日期:2011-01-01 00:00:00
abstract::Microstructure of thermal sprayed hydroxyapatite (HA) splats was characterized using transmission electron microscopy (TEM), and the formation mechanisms of micropores within the splats were investigated with the aid of simulated body fluids (SBF). High-velocity oxy-fuel and direct current (DC) plasma spray techniques...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2003.10.051
更新日期:2004-08-01 00:00:00
abstract::Polydimethacrylate resins were prepared by photopolymerization of Bis-GMA, TEGDMA, UDMA or Bis-EMA (4) monomer, initiated by camphoroquinone/N,N-dimethylaminoethyl methacrylate system. The study of physical properties of these resins showed that TEGDMA seems to create the most dense polymer network, which however is t...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(02)00380-0
更新日期:2003-02-01 00:00:00
abstract::A photografting technique to produce functional groups of silanol able to induce apatite nucleation was attempted on polyethylene substrate for biomimetic formation of bone-mineral-like apatite layer on its surface. The polyethylene surface was subjected to vapor-phase photografting of vinyltrimethoxysilane and subseq...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(00)00437-3
更新日期:2001-09-01 00:00:00
abstract::The systemic administration of immunosuppressive and anti-inflammatory drugs is routinely employed in organ transplantation to minimize graft rejection and improve graft survival. Localized drug delivery has the potential to improve transplant outcomes by providing sustained exposure to efficacious drug concentrations...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2017.12.020
更新日期:2018-03-01 00:00:00
abstract::Polypyrrole (PPy) is a conducting polymer and is obtained electrochemically on an electrode such as indium-tin oxide (ITO). In this study, in order to develop a novel cell-culture system which makes it possible to communicate with cultured mammalian cells, bovine adrenal chromaffin cells were cultured on PPy-coated IT...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/0142-9612(96)00015-4
更新日期:1996-10-01 00:00:00
abstract::Space experimentation of cardiomyocyte differentiation from human induced pluripotent stem cells offers an exciting opportunity to explore the potential of these cells for disease modeling, drug discovery and regenerative medicine. Previous studies on the International Space Station were done with 2D non-cryopreserved...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2021.120673
更新日期:2021-01-11 00:00:00
abstract::Hydrogels are frequently employed as medical device biomaterials due to their advantageous biological properties, e.g. resistance to infection and encrustation, biocompatibility; however, their poor mechanical properties generally limit the scope of application to coatings of medical devices. To address this limitatio...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2004.06.002
更新日期:2005-05-01 00:00:00
abstract::We introduce a general class of mixture models suitable to describe water-dependent degradation and erosion of biodegradable polymers in conjunction with drug release. The ability to predict and quantify degradation and erosion has direct impact in a variety of biomedical applications and is a useful design tool for b...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2010.01.008
更新日期:2010-04-01 00:00:00
abstract::We report here a thermal decomposition approach to the synthesis of water-soluble superparamagnetic manganese ferrite (MnFe(2)O(4)) nanoparticles (NPs) for magnetic resonance (MR) imaging applications. In this approach, tetraethylene glycol was utilized as a coordination and stabilization agent, rendering the NPs wate...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2010.01.055
更新日期:2010-05-01 00:00:00
abstract::The design of synthetic polymers may affect structural features of inflammatory cells, for example the expression of endogenous sugar receptor molecules like lectins in macrophages and foreign body giant multinucleate cells. This characteristic was studied histochemically by use of biotinylated (neo)glycoproteins. The...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/0142-9612(95)93578-2
更新日期:1995-10-01 00:00:00
abstract::We studied non-implanted ultra-high molecular weight polyethylene (UHMWPE) knee components, that were gamma-sterilized in air and shelf-aged during 6 and 7 years, to explore fracture mechanisms in the degraded material. Prior to the fractography study, we assessed degradation through FTIR and optical density measureme...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(00)00399-9
更新日期:2001-08-01 00:00:00
abstract::The present study investigated the ectopic osteoinduction and early degradation of recombinant human bone morphogenetic protein-2 (rhBMP-2)-loaded porous beta-tricalcium phosphate (beta-TCP) in mice. The porous beta-TCP with 50 microg of rhBMP-2 (n = 25) and porous beta-TCP (control group, n = 25) were implanted into ...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2004.10.035
更新日期:2005-07-01 00:00:00