Preparation and Characterization of PLGA-PEG-PLGA Nanoparticles Containing Salidroside and Tamoxifen for Breast Cancer Therapy.

abstract：:The purpose of this study was to demonstrate acoustic resonance spectrometry (ARS) as an alternative process analytical technology to near infrared (NIR) spectroscopy for the quantification of active pharmaceutical ingredient (API) in semi-solids such as creams, gels, ointments, and lotions. The ARS used for this rese...

journal_title：AAPS PharmSciTech

authors： Medendorp J,Buice RG Jr,Lodder RA

更新日期：2006-07-14 00:00:00

abstract：:The aim of this study was to apply quality by design (QbD) for pharmaceutical development of felodipine solid mixture (FSM) containing hydrophilic carriers and/or polymeric surfactants, for easier development of controlled-release tablets of felodipine. The material attributes, the process parameters (CPP), and the cr...

journal_title：AAPS PharmSciTech

authors： Basalious EB,El-Sebaie W,El-Gazayerly O

更新日期：2011-09-01 00:00:00

abstract：:Two different types of derivatives of theophylline (Th-H) incorporating ethyleneoxy groups into the promoiety have been synthesized. One is a soft alkyl type where N-methyl-N-methoxyethyleneoxycarbonylaminomethyl chlorides have been used to alkylate Th-H in the 7 position. The other is in an acyl type where methoxyeth...

journal_title：AAPS PharmSciTech

authors： Majumdar S,Mueller-Spaeth M,Sloan KB

更新日期：2012-09-01 00:00:00

abstract：:This work was aimed at evaluating the effect of a pharmaceutical cationic exchange resin (Amberlite IRP-69) on the properties of controlled release matrices using Methocel K4M (HPMC) or Ethocel 7cP (EC) as matrix formers. Diphenhydramine hydrochloride (DPH), which was cationic and water soluble, was chosen as a model ...

journal_title：AAPS PharmSciTech

authors： Akkaramongkolporn P,Ngawhirunpat T,Nunthanid J,Opanasopit P

更新日期：2008-01-01 00:00:00

abstract：:Pentoxifylline (PTX), an anti-hemorrhage drug used in the treatment of intermittent claudication, is extensively metabolized by the liver resulting in a reduction of the therapeutic levels within a short duration of time. Self-nano-emulsifying drug delivery system (SNEDDS) is well reported to enhance the bio-absorptio...

journal_title：AAPS PharmSciTech

authors： Shailendrakumar AM,Ghate VM,Kinra M,Lewis SA

更新日期：2020-04-21 00:00:00

abstract：:The impact of pharmaceutical materials properties on drug product quality and manufacturability is well recognised by the industry. An ongoing effort across industry and academia, the Manufacturing Classification System consortium, aims to gather the existing body of knowledge in a common framework to provide guidance...

journal_title：AAPS PharmSciTech

authors： Ferreira AP,Gamble JF,Leane MM,Park H,Olusanmi D,Tobyn M

更新日期：2018-11-01 00:00:00

abstract：:The effects of electron beam or gamma-irradiation on technological performances (capsule hardness, expressed as deforming work and dissolution time) of empty 2-shell capsules made of gelatin or hydroxypropylmethylcellulose (HPMC) were studied. Capsule structural changes induced by radiation treatment were investigated...

journal_title：AAPS PharmSciTech

authors： Cilurzo F,Selmin F,Minghetti P,Montanari L,Lenardi C,Orsini F,Poletti G

更新日期：2005-12-01 00:00:00

abstract：:The aim of the work is to develop a data fusion model using near-infrared (NIR) and process parameters for the predictions of drug dissolution from controlled release multiparticulate beads. Using a design of experiments, ciprofloxacin-coated beads were manufactured and critical process parameters such as air volume, ...

journal_title：AAPS PharmSciTech

authors： Ibrahim A,Kothari BH,Fahmy R,Hoag SW

更新日期：2019-06-18 00:00:00

abstract：:The purpose of this study was to prepare monodisperse gelatin microcapsules containing an active agent using microchannel (MC) emulsification, a novel technique for preparing water-in-oil (W/O) and oil-in-water (O/W) emulsions. As the first step in applying MC emulsification to the preparation of monodisperse gelatin ...

journal_title：AAPS PharmSciTech

authors： Iwamoto S,Nakagawa K,Sugiura S,Nakajima M

更新日期：2002-01-01 00:00:00

abstract：:The physicochemical properties of the optimized microemulsion and the permeating ability of oxyresveratrol in microemulsion were evaluated, and the efficacy of oxyresveratrol microemulsion in cutaneous herpes simplex virus type 1 (HSV-1) infection in mice was examined. The optimized microemulsion was composed of 10% w...

journal_title：AAPS PharmSciTech

authors： Sasivimolphan P,Lipipun V,Ritthidej G,Chitphet K,Yoshida Y,Daikoku T,Sritularak B,Likhitwitayawuid K,Pramyothin P,Hattori M,Shiraki K

更新日期：2012-12-01 00:00:00

abstract：:The oxidation of glucagon by the H2O2/Cu(2+) system and by simulated sunlight was studied using HPLC-MS methodologies. It was found that copper ion-catalyzed oxidation is much faster in the residue 1-12 region than in photo-oxidation, but it is slower than photo-oxidation in the residue 18-29 region. This difference i...

journal_title：AAPS PharmSciTech

authors： Zhang J

更新日期：2016-08-01 00:00:00

abstract：:The reliable in-line monitoring of pharmaceutical processes has been regarded as a key tool toward the full implementation of process analytical technology. In this study, near-infrared (NIR) spectroscopy was examined for use as an in-line monitoring method of the paracetamol cooling crystallization process. The drug ...

journal_title：AAPS PharmSciTech

authors： Wang IC,Lee MJ,Seo DY,Lee HE,Choi Y,Kim WS,Kim CS,Jeong MY,Choi GJ

更新日期：2011-06-01 00:00:00

abstract：:The current study explains the development of sorbitan monostearate and sesame oil-based organogels for topical drug delivery. The organogels were prepared by dissolving sorbitan monostearate in sesame oil (70°C). Metronidazole was used as a model antimicrobial. The formulations were characterized using phase contrast...

journal_title：AAPS PharmSciTech

authors： Singh VK,Pramanik K,Ray SS,Pal K

更新日期：2015-04-01 00:00:00

abstract：:The aim of this study was to develop benzydamine hydrochloride-loaded orodispersible films using the modification of a solvent casting method. An innovative approach was developed when the drying process of a small-scale production was used based on a heated inert base for casting the film. During this process, two ty...

journal_title：AAPS PharmSciTech

authors： Pechová V,Gajdziok J,Muselík J,Vetchý D

更新日期：2018-08-01 00:00:00

abstract：:Hypertension shows circadian blood pressure rhythms (day-night pattern) that urge the delivery of antihypertensive drugs at the right time in the desired levels. Thus, a bilayered core-in-cup buccoadhesive tablet was formulated that immediately releases olmesartan, to give a burst effect, and controls azelnidipine rel...

journal_title：AAPS PharmSciTech

authors： Rashad AA,Nageeb El-Helaly S,Abd El Rehim RT,El-Gazayerly ON

更新日期：2019-12-10 00:00:00

abstract：:The approach documented in this article reviews data from earlier process validation lifecycle stages with a described statistical model to provide the "best estimate" on the number of process performance qualification (PPQ) batches that should generate sufficient information to make a scientific and risk-based decisi...

journal_title：AAPS PharmSciTech

authors： Pazhayattil A,Alsmeyer D,Chen S,Hye M,Ingram M,Sanghvi P

更新日期：2016-08-01 00:00:00

abstract：:A feasibility evaluation of the addition of fumed silica (SiO2) into an agitated dryer to aid spray-dried solid dispersion intermediate (SDSDi) flow during secondary drying and discharge is described. The quantity of SiO2 to enhance the flow character of SDSDi was assessed by measuring particle size distribution, bulk...

journal_title：AAPS PharmSciTech

authors： Lee YC,McNevin M,Ikeda C,Chouzouri G,Moser J,Harris D,Howell L

更新日期：2019-05-03 00:00:00

abstract：:The objective of the present study was to develop a hydrodynamically balanced system for celecoxib as single-unit floating capsules. Various grades of low-density polymers were used for formulation of these capsules. The capsules were prepared by physical blending of celecoxib and the polymer in varying ratios. The fo...

journal_title：AAPS PharmSciTech

authors： Ali J,Arora S,Ahuja A,Babbar AK,Sharma RK,Khar RK

更新日期：2007-12-28 00:00:00

abstract：:The aim of this study was to evaluate and compare the in vitro and in vivo transdermal potential of w/o microemulsion (M) and gel (G) bases for diclofenac sodium (DS). The effect of dimethyl sulfoxide (DMSO) as a penetration enhancer was also examined when it was added to the M formulation. To study the in vitro poten...

journal_title：AAPS PharmSciTech

authors： Sarigüllü Ozgüney I,Yeşim Karasulu H,Kantarci G,Sözer S,Güneri T,Ertan G

更新日期：2006-10-20 00:00:00

abstract：:As a synthetic clay material, laponite RDS (LR) was investigated as an effective drug carrier as a result of the special nanodisk structure together with the negative-charged surface to achieve enhanced cellular uptake and targeted delivery. In this research work, the synthesized oligomeric hyaluronic acid-aminophenyl...

journal_title：AAPS PharmSciTech

authors： Yang Y,Li J,Chen F,Qiao S,Li Y,Pan W

更新日期：2019-11-20 00:00:00

abstract：:The objectives of this study are to enhance cellular accumulation of gemcitabine with chitosan/glyceryl monooleate (GMO) nanostructures, and to provide significant increase in cell death of human pancreatic cancer cells in vitro. The delivery system was prepared by a multiple emulsion solvent evaporation method. The n...

journal_title：AAPS PharmSciTech

authors： Trickler WJ,Khurana J,Nagvekar AA,Dash AK

更新日期：2010-03-01 00:00:00

abstract：:This work aimed to develop a fast-dissolving film made of low dextrose equivalent maltodextrins (MDX) containing nicotine hydrogen tartrate salt (NHT). Particular attention was given to the selection of the suitable taste-masking agent (TMA) and the characterisation of the ductility and flexibility under different mec...

journal_title：AAPS PharmSciTech

authors： Cilurzo F,Cupone IE,Minghetti P,Buratti S,Selmin F,Gennari CG,Montanari L

更新日期：2010-12-01 00:00:00

abstract：:The purpose of this research was to evaluate a new wireless and battery-free sensor technology for invasive product temperature measurement during freeze-drying. Product temperature is the most critical process parameter in a freeze-drying process, in particular during primary drying. The product temperature over time...

journal_title：AAPS PharmSciTech

authors： Schneid S,Gieseler H

更新日期：2008-01-01 00:00:00

abstract：:The present investigation was aimed at developing and optimizing a simple aqueous tablet-coating formulation and its process. 5-Fluorouracil (5-FU) was used to ascertain the relative lipophilic/hydrophilic behavior of the coating system. Optimization was performed by evaluating the adhesive force strength and cohesive...

journal_title：AAPS PharmSciTech

authors： Rai PR,Tiwary AK,Rana V

更新日期：2012-06-01 00:00:00

abstract：:The aim of this study was to formulate a new delivery system for ecological pesticides by the incorporation of Artemisia arborescens L essential oil into solid lipid nanoparticles (SLN). Two different SLN formulations were prepared following the high-pressure homogenization technique using Compritol 888 ATO as lipid a...

journal_title：AAPS PharmSciTech

authors： Lai F,Wissing SA,Müller RH,Fadda AM

更新日期：2006-01-03 00:00:00

abstract：:This study tests the hypothesis that association complexes formed between enoxaparin and cetyltrimethylammonium bromide (CTAB) augment permeation across the gastrointestinal mucosa due to improved encapsulation of this hydrophilic macromolecule within biocompatible poly (lactide-co-glycolide, PLGA RG 503) nanoparticle...

journal_title：AAPS PharmSciTech

authors： Eleraky NE,Swarnakar NK,Mohamed DF,Attia MA,Pauletti GM

更新日期：2020-02-03 00:00:00

abstract：:Paclitaxel (PTX) and gemcitabine (GEM) are often used in combination due to the synergistic anticancer effects. PTX and GEM combination showed a synergistic effect to SKOV-3 cells at a molar ratio of 1 to 1 and in PTX ➔ GEM sequence. Liposomes were explored as a carrier of PTX and GEM combination. We optimized the dru...

journal_title：AAPS PharmSciTech

authors： Liu Y,Tamam H,Yeo Y

更新日期：2018-02-01 00:00:00

abstract：:The aim of the present work was to produce 3D-printed oral dosage forms with a sufficient drug dose displaying various release profiles. Hot-melt extrusion was utilized to produce drug-loaded feedstock material that was subsequently 3D-printed into 6, 8, and 10 × 2.5 mm tablets with 15% and 90% infill levels. The prep...

journal_title：AAPS PharmSciTech

authors： Öblom H,Zhang J,Pimparade M,Speer I,Preis M,Repka M,Sandler N

更新日期：2019-01-07 00:00:00

abstract：:Enhancing and sustaining AMG 009 dissolution from a matrix tablet via microenvironmental pH modulation and supersaturation, where poorly soluble acidic AMG 009 molecule was intimately mixed and compressed together with a basic pH modifier (e.g., sodium carbonate) and nucleation inhibitor hydroxypropyl methylcellulose ...

journal_title：AAPS PharmSciTech

authors： Bi M,Kyad A,Alvarez-Nunez F,Alvarez F

更新日期：2011-12-01 00:00:00

abstract：:The classically used nontargeted chemotherapeutic approach to pancreatic cancer has a dual drawback of suboptimal drug delivery at the target site and the systemic side effects produced by the unfettered exposure of the drug to healthy tissue. This study has the objective of developing novel poly(2-ethyl-2-oxazoline) ...

journal_title：AAPS PharmSciTech

authors： Deodhar S,Dash AK,North EJ,Hulce M

更新日期：2020-08-10 00:00:00