Enhancing and sustaining AMG 009 dissolution from a bilayer oral solid dosage form via microenvironmental pH modulation and supersaturation.

abstract：:In community settings, IM injection of 0.3 mg epinephrine (Epi) using an auto-injector is the drug of choice for treatment of anaphylaxis. Previously, a taste-masking (TM) formulation of fast-disintegrating sublingual tablets (FDSTs) was developed in our lab. Also, Epi was micronized (Epi-MC) successfully and reduced ...

journal_title：AAPS PharmSciTech

authors： Rachid O,Simons KJ,Rawas-Qalaji M

更新日期：2018-11-01 00:00:00

abstract：:The purpose of this study was to demonstrate acoustic resonance spectrometry (ARS) as an alternative process analytical technology to near infrared (NIR) spectroscopy for the quantification of active pharmaceutical ingredient (API) in semi-solids such as creams, gels, ointments, and lotions. The ARS used for this rese...

journal_title：AAPS PharmSciTech

authors： Medendorp J,Buice RG Jr,Lodder RA

更新日期：2006-07-14 00:00:00

abstract：:Griseofulvin, an antifungal agent, is a BCS class II drug slowly, erratically, and incompletely absorbed from the gastrointestinal tract in humans. The clinical failure of the conventional oral therapy of griseofulvin is most likely attributed to its poor solubility and appreciable inter- and intra-subject variation i...

journal_title：AAPS PharmSciTech

authors： Aggarwal N,Goindi S,Mehta SD

更新日期：2012-03-01 00:00:00

abstract：:The current study aimed to develop a prolonged-release pramipexole (PPX) transdermal patch for the treatment of Parkinson's disease. Permeation parameters of PPX were investigated using human cadaver skin. Pramipexole patches were prepared using DURO-TAK® pressure-sensitive-adhesive (PSA) and evaluated for drug stabil...

journal_title：AAPS PharmSciTech

authors： Pu T,Li X,Sun Y,Ding X,Pan Y,Wang Q

更新日期：2017-04-01 00:00:00

abstract：:The purpose of this research was to improve the solubility and therefore dissolution and bioavailability of triamterene, a poorly water soluble diuretic, by complexation with beta-cyclodextrin. Triamterene has been reported to show low bioavailability after oral administration, with wide intersubject variation. This s...

journal_title：AAPS PharmSciTech

authors： Mukne AP,Nagarsenker MS

更新日期：2004-03-29 00:00:00

abstract：:A combination of analytical and statistical methods is used to improve a tablet coating process guided by quality by design (QbD) principles. A solid dosage form product was found to intermittently exhibit bad taste. A suspected cause was the variability in coating thickness which could lead to the subject tasting the...

journal_title：AAPS PharmSciTech

authors： Dubey A,Boukouvala F,Keyvan G,Hsia R,Saranteas K,Brone D,Misra T,Ierapetritou MG,Muzzio FJ

更新日期：2012-03-01 00:00:00

abstract：:Onychomycosis is a chronic disorder that is difficult to manage and hard to eradicate with perilous trends to relapse. Due to increased prevalence of HIV, use of immunosuppressant drugs and lifestyle-related factors, population affected with fungal infection of nail (Onychomycosis) happens to increase extensively in l...

journal_title：AAPS PharmSciTech

authors： Vikas A,Rashmin P,Mrunali P,Chavan RB,Kaushik T

更新日期：2020-01-14 00:00:00

abstract：:As a synthetic clay material, laponite RDS (LR) was investigated as an effective drug carrier as a result of the special nanodisk structure together with the negative-charged surface to achieve enhanced cellular uptake and targeted delivery. In this research work, the synthesized oligomeric hyaluronic acid-aminophenyl...

journal_title：AAPS PharmSciTech

authors： Yang Y,Li J,Chen F,Qiao S,Li Y,Pan W

更新日期：2019-11-20 00:00:00

abstract：:This study investigated the solubilization of cyclosporin A (CsA), a neutral undecapeptide, by cosolvency, micellization, and complexation. Cosolvents (ethanol, propylene glycol, polyethylene glycol, tetrahydrofurfuryl alcohol polyethyleneglycol ether, and glycerin), surfactants (polyoxyethylene sorbitan monooleate [(...

journal_title：AAPS PharmSciTech

authors： Ran Y,Zhao L,Xu Q,Yalkowsky SH

更新日期：2001-01-18 00:00:00

abstract：:Two different types of derivatives of theophylline (Th-H) incorporating ethyleneoxy groups into the promoiety have been synthesized. One is a soft alkyl type where N-methyl-N-methoxyethyleneoxycarbonylaminomethyl chlorides have been used to alkylate Th-H in the 7 position. The other is in an acyl type where methoxyeth...

journal_title：AAPS PharmSciTech

authors： Majumdar S,Mueller-Spaeth M,Sloan KB

更新日期：2012-09-01 00:00:00

abstract：:Spironolactone is a drug derived from sterols that exhibits an incomplete oral absorption due to its low water solubility and slow dissolution rate. In this study, formulations of spironolactone with four disintegrants named as croscarmellose sodium, crospovidone, sodium starch glycolate and microcrystalline cellulose...

journal_title：AAPS PharmSciTech

authors： Rojas J,Guisao S,Ruge V

更新日期：2012-12-01 00:00:00

abstract：:Pellet manufacturing by extrusion/spheronization is quite common in the pharmaceutical field because the obtained product is characterized by a high sphericity as well as a narrow particle size distribution. The established mechanisms only consider deformation of the initially fractured particles but do not account fo...

journal_title：AAPS PharmSciTech

authors： Koester M,Thommes M

更新日期：2010-12-01 00:00:00

abstract：:Combined dissolution and permeation systems are designed to simultaneously assess the dissolution of a pharmaceutical dosage form and the permeation of dissolved drugs therefrom. However, there were still some limitations on predicting the possible absorption rate-limiting steps and improving the in vitro-in vivo corr...

journal_title：AAPS PharmSciTech

authors： Li Z,He X,Tian S,Feng G,Huang C,Xun M,Wu Z,Wang Y

更新日期：2019-10-24 00:00:00

abstract：:Phase transformations in formulations can lead to instability in physicochemical, biopharmaceutical, and processing properties of products. The influences of formulation design on the optimal dosage forms should be specified. The aim here was to investigate whether excipients with different water sorption behavior aff...

journal_title：AAPS PharmSciTech

authors： Airaksinen S,Karjalainen M,Kivikero N,Westermarck S,Shevchenko A,Rantanen J,Yliruusi J

更新日期：2005-10-06 00:00:00

abstract：:The purpose of the present study was to design mucoadhesive gliadin nanoparticles (GNP) containing amoxicillin and to evaluate their effectiveness in eradicating Helicobacter pylori. GNP-bearing amoxicillin (AGNP) was prepared by desolvation method. The effect of process variables such as gliadin concentration and ini...

journal_title：AAPS PharmSciTech

authors： Umamaheshwari RB,Ramteke S,Jain NK

更新日期：2004-04-07 00:00:00

abstract：:We have designed a microemulsion (ME) containing Ketoprofen (KET) for anti-inflammatory effect evaluated using the rat paw edema model. The ME was prepared by adding propylene glycol (PG) loaded with 1% KET/water (3:1, w/w), to a mixture of sorbitan monooleate and polysorbate 80 (47.0%) at 3:1 (w/w) and canola oil (38...

journal_title：AAPS PharmSciTech

authors： Aliberti ALM,de Queiroz AC,Praça FSG,Eloy JO,Bentley MVLB,Medina WSG

更新日期：2017-10-01 00:00:00

abstract：:The present study was carried out with a view to enhance the dissolution of poorly water-soluble BCS-class II drug aceclofenac by co-grinding with novel porous carrier Neusilin US(2.) (amorphous microporous granules of magnesium aluminosilicate, Fuji Chemical Industry, Toyama, Japan). Neusilin US(2) has been used as a...

journal_title：AAPS PharmSciTech

authors： Vadher AH,Parikh JR,Parikh RH,Solanki AB

更新日期：2009-01-01 00:00:00

abstract：:The purpose of the study was to synthesize and characterize a new form of topical membranes as chitosan-based hydrogel membranes for bacterial skin infections. The polymeric membranes were synthesized by modification in free radical solution polymerization technique. High molecular weight (HMW) chitosan polymer was cr...

journal_title：AAPS PharmSciTech

authors： Ahmad S,Minhas MU,Ahmad M,Sohail M,Abdullah O,Badshah SF

更新日期：2018-10-01 00:00:00

abstract：:This study was conducted to formulate buccal films consisting of polyvinyl alcohol (PVA) and poly-N-hydroxyethyl-aspartamide (PHEA), to improve the dissolution of the drug through the oral mucosa. Ibuprofen sodium salt was used as a model drug, and the buccal film was expected to enhance its dissolution rate. Two diff...

journal_title：AAPS PharmSciTech

authors： Al-Sahaf Z,Raimi-Abraham B,Licciardi M,de Mohac LM

更新日期：2020-10-02 00:00:00

abstract：:Colorectal cancer is a global concern, and its treatment is fraught with non-selective effects including adverse side effects requiring hospital visits and palliative care. A relatively safe drug formulated in a bioavailability enhancing and targeting delivery platform will be of significance. Metformin-loaded solid l...

journal_title：AAPS PharmSciTech

authors： Ngwuluka NC,Kotak DJ,Devarajan PV

更新日期：2017-02-01 00:00:00

abstract：:Chitosan microspheres as drug delivery system have attained importance and attracted the attention of researchers in last few years. This study was aimed toward the elucidation of the effect of viscosity of external oil phase on the properties of microspheres prepared by emulsification method. Chitosan microspheres we...

journal_title：AAPS PharmSciTech

authors： Khare P,Jain SK

更新日期：2009-01-01 00:00:00

abstract：:This proof-of-concept study explores the feasibility of using a drug-loaded hydrophilic polymeric layer sandwiched between two hydrophobic layers for improving film drug load while achieving sustained release of poorly water-soluble drug. Such films having total thickness in range ~ 146-250 μm were prepared by slurry-...

journal_title：AAPS PharmSciTech

authors： Kevadiya BD,Zhang L,Davé RN

更新日期：2018-08-01 00:00:00

abstract：:The purpose of this research was to use inline real-time near-infrared (NIR) to measure the moisture content of granules manufactured using a commercial production scale continuous twin-screw granulator fluid-bed dryer milling process. A central composite response surface statistical design was used to study the effec...

journal_title：AAPS PharmSciTech

authors： Chablani L,Taylor MK,Mehrotra A,Rameas P,Stagner WC

更新日期：2011-12-01 00:00:00

abstract：:The aim of this study is to develop an orally disintegrating film (ODF) containing a microparticulate measles vaccine formulation for buccal delivery. The measles vaccine microparticles were made with biocompatible and biodegradable bovine serum albumin (BSA) and processed by spray drying. These vaccine microparticles...

journal_title：AAPS PharmSciTech

authors： Gala RP,Popescu C,Knipp GT,McCain RR,Ubale RV,Addo R,Bhowmik T,Kulczar CD,D'Souza MJ

更新日期：2017-02-01 00:00:00

abstract：:The purpose of this present study was to evaluate the antiangiogenic activity of sterically stabilized liposomes containing paclitaxel (SSL-PTX). The SSL-PTX was prepared by the thin-film method. The release of paclitaxel from SSL-PTX was analyzed using a dialysis method. The effect of SSL-PTX on endothelial cell prol...

journal_title：AAPS PharmSciTech

authors： Huang Y,Chen XM,Zhao BX,Ke XY,Zhao BJ,Zhao X,Wang Y,Zhang X,Zhang Q

更新日期：2010-06-01 00:00:00

abstract：:Spherical granules (pellets) are quite useful in many pharmaceutical applications. The extrusion spheronisation technique is well established as a method of producing pellets of a spherical shape and narrow size distribution. After the extrusion, the cylindrical extrudates are transformed to spherical pellets by spher...

journal_title：AAPS PharmSciTech

authors： Koester M,Thommes M

更新日期：2012-06-01 00:00:00

abstract：:Colorectal cancer (CRC) is the third most common cancer worldwide. Its poor response to current treatment options in advanced stages and the need for efficient diagnosis in early stages call for the development of new therapeutic and diagnostic strategies. Some of them are based on the use of nanometric materials as c...

journal_title：AAPS PharmSciTech

authors： Cabeza L,Perazzoli G,Mesas C,Jiménez-Luna C,Prados J,Rama AR,Melguizo C

更新日期：2020-06-26 00:00:00

abstract：:The aim of the present work was to produce 3D-printed oral dosage forms with a sufficient drug dose displaying various release profiles. Hot-melt extrusion was utilized to produce drug-loaded feedstock material that was subsequently 3D-printed into 6, 8, and 10 × 2.5 mm tablets with 15% and 90% infill levels. The prep...

journal_title：AAPS PharmSciTech

authors： Öblom H,Zhang J,Pimparade M,Speer I,Preis M,Repka M,Sandler N

更新日期：2019-01-07 00:00:00

abstract：:A new, simple, inexpensive, and rapid 96-well plate UV spectrophotometric method was developed and validated for the quantification of compound 48/80 (C48/80) associated with particles. C48/80 was quantified at 570 nm after reaction with acetaldehyde and sodium nitroprusside in an alkaline solution (pH 9.6). The metho...

journal_title：AAPS PharmSciTech

authors： Bento D,Borchard G,Gonçalves T,Borges O

更新日期：2013-06-01 00:00:00

abstract：:Solid dispersion is one of the most effective ways to improve the dissolution of insoluble drugs. When the carrier can highly disperse the drug, it will increase the wettability of the drug and reduce the surface tension, thus improving the solubility, dissolution, and bioavailability. However, amorphous solid dispers...

journal_title：AAPS PharmSciTech

authors： Wang X,Zhang L,Ma D,Tang X,Zhang Y,Yin T,Gou J,Wang Y,He H

更新日期：2020-09-25 00:00:00