Acoustic-resonance spectrometry as a process analytical technology for the quantification of active pharmaceutical ingredient in semi-solids.

abstract：:To enhance the stability of coenzyme Q10 (CoQ10), Kolliphor® HS 15 (HS15) was employed as a carrier to build up a stable CoQ10-loaded micelle delivery system. The impact of micellar compositions, the preparation condition, and the preparation method on size characteristics, the solubilization efficiency, and micellar ...

journal_title：AAPS PharmSciTech

authors： Liu L,Mao K,Wang W,Pan H,Wang F,Yang M,Liu H

更新日期：2016-06-01 00:00:00

abstract：:The effect of milled and micronized lactose fines on the fluidization and in vitro aerosolization properties of dry powder inhaler (DPI) formulations was investigated, and the suitability of static and dynamic methods for characterizing general powder flow properties of these blends was assessed. Lactose carrier pre-b...

journal_title：AAPS PharmSciTech

authors： Kinnunen H,Hebbink G,Peters H,Shur J,Price R

更新日期：2014-08-01 00:00:00

abstract：:Transdermal drug delivery is an emerging field in the pharmaceutical remit compared with conventional methods (oral and parenteral). Microneedle (MN)-based devices have gained significant interest as a strategy to overcome the skin's formidable barrier: the stratum corneum. This approach provides a less invasive, more...

journal_title：AAPS PharmSciTech

authors： Ali R,Mehta P,Arshad MS,Kucuk I,Chang MW,Ahmad Z

更新日期：2019-12-05 00:00:00

abstract：:Direct pulmonary delivery is a promising step in developing effective gene therapies for respiratory disease. Gene therapies can be used to treat the root cause of diseases, rather than just the symptoms. However, developing effective therapies that do not cause toxicity and that successfully reach the target site at ...

journal_title：AAPS PharmSciTech

authors： Terry TL,Givens BE,Rodgers VGJ,Salem AK

更新日期：2019-01-02 00:00:00

abstract：:The purpose of this research was to compare the viscoelastic properties of several neutral and anionic polysaccharide polymers with their mucociliary transport rates (MTR) across explants of ciliated bovine tracheal tissue to identify rheologic parameters capable of predicting the extent of reduction in mucociliary tr...

journal_title：AAPS PharmSciTech

authors： Shah AJ,Donovan MD

更新日期：2007-04-20 00:00:00

abstract：:The purpose of this study was to prepare monodisperse gelatin microcapsules containing an active agent using microchannel (MC) emulsification, a novel technique for preparing water-in-oil (W/O) and oil-in-water (O/W) emulsions. As the first step in applying MC emulsification to the preparation of monodisperse gelatin ...

journal_title：AAPS PharmSciTech

authors： Iwamoto S,Nakagawa K,Sugiura S,Nakajima M

更新日期：2002-01-01 00:00:00

abstract：:Next to the coating formulation, process conditions play important roles in determining coating quality. This study aims to develop an operational window that separates layering from agglomeration regimes and, furthermore, the one that leads to the best coating quality in a fluidized bed coater. The bed relative humid...

journal_title：AAPS PharmSciTech

authors： Laksmana FL,Hartman Kok PJ,Vromans H,Frijlink HW,Van der Voort Maarschalk K

更新日期：2009-01-01 00:00:00

abstract：:Bilayer nicotine mucoadhesive patches were prepared and evaluated to determine the feasibility of the formulation as a nicotine replacement product to aid in smoking cessation. Nicotine patches were prepared using xanthan gum or carbopol 934 as a mucoadhesive polymers and ethyl cellulose as a backing layer. The patche...

journal_title：AAPS PharmSciTech

authors： Abu-Huwaij R,Obaidat RM,Sweidan K,Al-Hiari Y

更新日期：2011-03-01 00:00:00

abstract：:The aims of the current study were to develop and evaluate clindamycin palmitate hydrochloride (CPH) 3D-printed tablets (printlets) manufactured by selective laser sintering (SLS). Optimization of the formulation was performed by studying the effect of formulation and process factors on critical quality attributes of ...

journal_title：AAPS PharmSciTech

authors： Mohamed EM,Barakh Ali SF,Rahman Z,Dharani S,Ozkan T,Kuttolamadom MA,Khan MA

更新日期：2020-08-13 00:00:00

abstract：:The objective of this study was to design a time-controlled pulsatile release (TCPR) system containing propranolol (PNH) as an active pharmaceutical ingredient. Here, the developed dosage forms were coated with hydroxypropyl-methylcellulose (HPMC) and other excipients as barrier layer using dry-coated technology. The ...

journal_title：AAPS PharmSciTech

authors： Chen K,Wang Y,Gai X,Wang H,Li Y,Wen H,Pan W,Yang X

更新日期：2017-10-01 00:00:00

abstract：:Vemurafenib is a poorly soluble, low permeability drug that has a demonstrated need for a solubility-enhanced formulation. However, conventional approaches for amorphous solid dispersion production are challenging due to the physiochemical properties of the compound. A suitable and novel method for creating an amorpho...

journal_title：AAPS PharmSciTech

authors： Ellenberger DJ,Miller DA,Kucera SU,Williams RO 3rd

更新日期：2018-07-01 00:00:00

abstract：:In this study, the resveratrol spray-dried emulsions were developed using a quality-by-design approach. Further, the product and process factors that affected the quality of the spray-dried emulsions were analyzed and illustrated using an Ishikawa diagram. The product and process risks were prioritized using a risk-ra...

journal_title：AAPS PharmSciTech

authors： Benjasirimongkol P,Piriyaprasarth S,Moribe K,Sriamornsak P

更新日期：2018-12-18 00:00:00

abstract：:Nanotechnology is having a significant impact in the drug delivery systems and diagnostic devices. As most of the nanosystems are intended to be administered in vivo, there is a need for stability models, which could simulate the biological environment. Instability issues could lead to particle aggregation and in turn...

journal_title：AAPS PharmSciTech

authors： Shaikh MV,Kala M,Nivsarkar M

更新日期：2017-05-01 00:00:00

abstract：:Solid dispersion is one of the most effective ways to improve the dissolution of insoluble drugs. When the carrier can highly disperse the drug, it will increase the wettability of the drug and reduce the surface tension, thus improving the solubility, dissolution, and bioavailability. However, amorphous solid dispers...

journal_title：AAPS PharmSciTech

authors： Wang X,Zhang L,Ma D,Tang X,Zhang Y,Yin T,Gou J,Wang Y,He H

更新日期：2020-09-25 00:00:00

abstract：:Solubility challenge for a poorly water-soluble drug gets further intensified when it is weakly ionic because the most common solubility enhancement technique, salt formation, becomes less feasible. Salt screening for such drugs often concludes with either a difficult to crystalize salt or an unstable salt, leading th...

journal_title：AAPS PharmSciTech

authors： Nair R,Lamare I,Tiwari NK,Ravi PR,Pillai R

更新日期：2018-01-01 00:00:00

abstract：:A combination of analytical and statistical methods is used to improve a tablet coating process guided by quality by design (QbD) principles. A solid dosage form product was found to intermittently exhibit bad taste. A suspected cause was the variability in coating thickness which could lead to the subject tasting the...

journal_title：AAPS PharmSciTech

authors： Dubey A,Boukouvala F,Keyvan G,Hsia R,Saranteas K,Brone D,Misra T,Ierapetritou MG,Muzzio FJ

更新日期：2012-03-01 00:00:00

abstract：:The objective of the present study was to develop fast dissolving oral film of the antipsychotic drug, flupentixol dihydrochloride, to enhance its bioavailability, optimize its therapeutic effect when used to treat depression with anxiety, and increase the convenience and compliance by the mentally ill, developmentall...

journal_title：AAPS PharmSciTech

authors： Abdelbary A,Bendas ER,Ramadan AA,Mostafa DA

更新日期：2014-12-01 00:00:00

abstract：:The purpose of this study was to investigate the effect of particle size, storage temperature, and duration of storage on the physical stability and morphology of polylactic-co-glycolic acid (PLGA) nanospheres and microspheres. PLGA nanospheres and microspheres containing the fluorescent dye, Bodipy, were prepared in ...

journal_title：AAPS PharmSciTech

authors： De S,Robinson DH

更新日期：2004-09-13 00:00:00

abstract：:The purpose of this study was to develop formulations and systematically evaluate in vitro performances of buccoadhesive patches of propranolol hydrochloride using the hydrophobic polymer Eudragit L-100 as the base matrix. The hydrophilic polymers Carbopol 934 and polyvinyl pyrrolidone (PVP) K30 were incorporated into...

journal_title：AAPS PharmSciTech

authors： Patel VM,Prajapati BG,Patel MM

更新日期：2007-06-22 00:00:00

abstract：:The purpose of this research was to prepare and evaluate sustained release mucoadhesive tablets of Itraconazole. It is practically insoluble in aqueous fluids hence its solid dispersion with Eudragit E100 was prepared by spray drying. This was formulated in matrix of hydrophilic mucoadhesive polymers Carbopol 934P (CP...

journal_title：AAPS PharmSciTech

authors： Madgulkar A,Kadam S,Pokharkar V

更新日期：2008-01-01 00:00:00

abstract：:The purpose of this research was to evaluate a novel fiber-optic photometer for its ability to monitor physical instabilities occurring in concentrated emulsions during storage. For this, the fiber-optic photometer was used to measure transmission of oil-in-water emulsions stabilized with hypromellose (HPMC) as a func...

journal_title：AAPS PharmSciTech

authors： Oliczewski S,Daniels R

更新日期：2007-08-31 00:00:00

abstract：:Current pharmacopeial methods for in vitro orally inhaled product (OIP) performance testing were developed primarily to support requirements for drug product registration and quality control. In addition, separate clinical studies are undertaken in order to quantify safety and efficacy in the hands of the patient. How...

journal_title：AAPS PharmSciTech

authors： Mitchell JP,Suggett J,Nagel M

更新日期：2016-08-01 00:00:00

abstract：:Pharmaceutical aerosols have been targeted to the lungs for the treatment of asthma and pulmonary infectious diseases successfully. Micafungin (Astellas Pharma US, Deerfield, IL, USA) has been shown to be an effective antifungal agent when administrated intravenously. Pulmonary delivery of micafungin has not previousl...

journal_title：AAPS PharmSciTech

authors： Shi S,Ashley ES,Alexander BD,Hickey AJ

更新日期：2009-01-01 00:00:00

abstract：:The impact of pharmaceutical materials properties on drug product quality and manufacturability is well recognised by the industry. An ongoing effort across industry and academia, the Manufacturing Classification System consortium, aims to gather the existing body of knowledge in a common framework to provide guidance...

journal_title：AAPS PharmSciTech

authors： Ferreira AP,Gamble JF,Leane MM,Park H,Olusanmi D,Tobyn M

更新日期：2018-11-01 00:00:00

abstract：:Drying is one of the standard unit operations in the pharmaceutical industry and it is important to become aware of the circumstances that dominate during the process. The purpose of this study was to test microcapsulated thermochromic pigments as heat indicators in a fluid bed drying process. The indicator powders we...

journal_title：AAPS PharmSciTech

authors： Lakio S,Heinämäki J,Yliruusi J

更新日期：2010-03-01 00:00:00

abstract：:The aim of this work was to assess the effect of 2 formulation variables, the pectin type (with different degrees of esterification [DEs]) and the amount of calcium, on drug release from pectin-based matrix tablets. Pectin matrix tablets were prepared by blending indomethacin (a model drug), pectin powder, and various...

journal_title：AAPS PharmSciTech

authors： Sungthongjeen S,Sriamornsak P,Pitaksuteepong T,Somsiri A,Puttipipatkhachorn S

更新日期：2004-02-12 00:00:00

abstract：:While polyethylene oxide (PEO)-based matrix tablets are frequently used as abuse-deterrent dosage forms, there is limited information available regarding how the selection of formulation components and manufacturing processes affect the resulting abuse-deterrent properties. The objective of the current study was to ev...

journal_title：AAPS PharmSciTech

authors： Meruva S,Donovan MD

更新日期：2019-12-19 00:00:00

abstract：:The exudates from the incised trunk of Terminalia randii has been evaluated as controlled release excipient in comparison with xanthan gum and hydroxypropylmethylcellulose (HPMC) using carvedilol (water insoluble) and theophylline (water soluble) as model drugs. Matrix tablets were prepared by direct compression and t...

journal_title：AAPS PharmSciTech

authors： Bamiro OA,Odeku OA,Sinha VR,Kumar R

更新日期：2012-03-01 00:00:00

abstract：:This study investigated the effects of some essential oils on Limantria dispar (Lepidoptera: Lymantridae, gypsy moth) larvae, one of the most serious pests of cork oak forests. The essential oils were first formulated as oil in water (o/w) emulsions and used in laboratory bioassays to assess their lethal concentration...

journal_title：AAPS PharmSciTech

authors： Moretti MD,Sanna-Passino G,Demontis S,Bazzoni E

更新日期：2002-01-01 00:00:00

abstract：PURPOSE:To develop a novel nanoparticle drug delivery system consisting of chitosan and glyceryl monooleate (GMO) for the delivery of a wide variety of therapeutics including paclitaxel. METHODS:Chitosan/GMO nanoparticles were prepared by multiple emulsion (o/w/o) solvent evaporation methods. Particle size and surface...

journal_title：AAPS PharmSciTech

authors： Trickler WJ,Nagvekar AA,Dash AK

更新日期：2008-01-01 00:00:00