Physicochemical and Preclinical Evaluation of a Novel Buccal Measles Vaccine.

Abstract:

:The aim of this study is to develop an orally disintegrating film (ODF) containing a microparticulate measles vaccine formulation for buccal delivery. The measles vaccine microparticles were made with biocompatible and biodegradable bovine serum albumin (BSA) and processed by spray drying. These vaccine microparticles were incorporated in the ODF, consisting of Lycoat RS720®, Neosorb P60W® and Tween 80. The yield of the microparticles was approximately 85-95%, w/w. The mean size of the vaccine microparticles was 3.65 ± 1.89 μm and had a slightly negative surface charge of 32.65 ± 2.4 mV. The vaccine particles were nontoxic to normal cells at high concentrations (500 μg/2.5 × 105 cells) of vaccine particles. There was a significant induction of innate immune response by vaccine microparticles which was observed in vitro when compared to blank microparticles (P < 0.05). The vaccine microparticles also significantly increased the antigen presentation and co-stimulatory molecules expression on antigen presenting cells, which is a prerequisite for Th1 and Th2 immune responses. When the ODF vaccine formulation was dosed in juvenile pigs, significantly higher antibody titers were observed after week 2, with a significant increase at week 4 and plateauing through week 6 comparative to naïve predose titers. The results suggest that the ODF measles vaccine formulation is a viable dosage form alternative to noninvasive immunization that may increase patient compliance and commercial distribution.

journal_name

AAPS PharmSciTech

journal_title

AAPS PharmSciTech

authors

Gala RP,Popescu C,Knipp GT,McCain RR,Ubale RV,Addo R,Bhowmik T,Kulczar CD,D'Souza MJ

doi

10.1208/s12249-016-0566-3

subject

Has Abstract

pub_date

2017-02-01 00:00:00

pages

283-292

issue

2

issn

1530-9932

pii

10.1208/s12249-016-0566-3

journal_volume

18

pub_type

杂志文章
  • Preparation and Characterization of PLGA-PEG-PLGA Nanoparticles Containing Salidroside and Tamoxifen for Breast Cancer Therapy.

    abstract::Nanoparticles (NPs) containing the hydrophilic drug salidroside (Sal) and the hydrophobic drug tamoxifen (Tam) were prepared using a triblock copolymer poly(lactic-co-glycolic acid) (PLGA)-poly(ethylene glycol) (PEG)-PLGA to achieve synergism in the treatment of breast cancer. The double emulsion (w/o/w) method was us...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-019-1523-8

    authors: Yu X,Sun L,Tan L,Wang M,Ren X,Pi J,Jiang M,Li N

    更新日期:2020-01-29 00:00:00

  • Porous Core/Dense Shell PLA Microspheres Embedded with High Drug Loading of Bupivacaine Crystals for Injectable Prolonged Release.

    abstract::Objective of the study was to design an injectable microsphere preparation with high drug loading of bupivacaine for prolonged release and local anesthetic. PLA or PLGA was used as the biodegradable matrix material to fabricate microspheres with the o/w emulsification-solvent evaporation method. The characterization o...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-020-01878-8

    authors: Xu J,Bai Y,Li X,Wei Z,Sun L,Yu H,Xu H

    更新日期:2021-01-06 00:00:00

  • Particle size and temperature effect on the physical stability of PLGA nanospheres and microspheres containing Bodipy.

    abstract::The purpose of this study was to investigate the effect of particle size, storage temperature, and duration of storage on the physical stability and morphology of polylactic-co-glycolic acid (PLGA) nanospheres and microspheres. PLGA nanospheres and microspheres containing the fluorescent dye, Bodipy, were prepared in ...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/pt050453

    authors: De S,Robinson DH

    更新日期:2004-09-13 00:00:00

  • Microemulsion-based oxyresveratrol for topical treatment of herpes simplex virus (HSV) infection: physicochemical properties and efficacy in cutaneous HSV-1 infection in mice.

    abstract::The physicochemical properties of the optimized microemulsion and the permeating ability of oxyresveratrol in microemulsion were evaluated, and the efficacy of oxyresveratrol microemulsion in cutaneous herpes simplex virus type 1 (HSV-1) infection in mice was examined. The optimized microemulsion was composed of 10% w...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-012-9828-x

    authors: Sasivimolphan P,Lipipun V,Ritthidej G,Chitphet K,Yoshida Y,Daikoku T,Sritularak B,Likhitwitayawuid K,Pramyothin P,Hattori M,Shiraki K

    更新日期:2012-12-01 00:00:00

  • Stage 2 Process Performance Qualification (PPQ): a Scientific Approach to Determine the Number of PPQ Batches.

    abstract::The approach documented in this article reviews data from earlier process validation lifecycle stages with a described statistical model to provide the "best estimate" on the number of process performance qualification (PPQ) batches that should generate sufficient information to make a scientific and risk-based decisi...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章,评审

    doi:10.1208/s12249-015-0409-7

    authors: Pazhayattil A,Alsmeyer D,Chen S,Hye M,Ingram M,Sanghvi P

    更新日期:2016-08-01 00:00:00

  • Liquid proliposomes of nimodipine drug delivery system: preparation, characterization, and pharmacokinetics.

    abstract::To investigate the possibility of liquid proliposomes being carriers for oral delivery, nimodipine liquid proliposomes-based soft capsules (NPSC) were prepared. Nimodipine proliposomes were characterized by transmission electron microscopy (TEM), conversion rate from proliposomes to liposomes, entrapment efficiency, p...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-013-9924-6

    authors: Sun C,Wang J,Liu J,Qiu L,Zhang W,Zhang L

    更新日期:2013-03-01 00:00:00

  • An investigation into the effect of fine lactose particles on the fluidization behaviour and aerosolization performance of carrier-based dry powder inhaler formulations.

    abstract::The effect of milled and micronized lactose fines on the fluidization and in vitro aerosolization properties of dry powder inhaler (DPI) formulations was investigated, and the suitability of static and dynamic methods for characterizing general powder flow properties of these blends was assessed. Lactose carrier pre-b...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-014-0119-6

    authors: Kinnunen H,Hebbink G,Peters H,Shur J,Price R

    更新日期:2014-08-01 00:00:00

  • Formulation and In Vitro Release Kinetics of Mucoadhesive Blend Gels Containing Matrine for Buccal Administration.

    abstract::Enterovirus 71 (EV71) is a pathogenic factor of severe hand, foot, and mouth disease (HFMD). No vaccine or specific treatment is currently available for EV71 infection. Hence, we developed a buccal mucoadhesive gel containing matrine to protect against HFMD. Mucoadhesive gels were prepared by Carbopol 974P and were co...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-017-0853-7

    authors: Chen X,Yan J,Yu S,Wang P

    更新日期:2018-01-01 00:00:00

  • Polymeric micelles of PEG-PE as carriers of all-trans retinoic acid for stability improvement.

    abstract::The topical application of all-trans retinoic acid (ATRA) is an effective treatment for several skin disorders, including photo-aging. Unfortunately, ATRA is susceptible to light, heat, and oxidizing agents. Thus, this study aimed to investigate the ability of polymeric micelles prepared from polyethylene glycol conju...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-011-9749-0

    authors: Wichit A,Tangsumranjit A,Pitaksuteepong T,Waranuch N

    更新日期:2012-03-01 00:00:00

  • New insights into the pelletization mechanism by extrusion/spheronization.

    abstract::Pellet manufacturing by extrusion/spheronization is quite common in the pharmaceutical field because the obtained product is characterized by a high sphericity as well as a narrow particle size distribution. The established mechanisms only consider deformation of the initially fractured particles but do not account fo...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-010-9532-7

    authors: Koester M,Thommes M

    更新日期:2010-12-01 00:00:00

  • In situ forming formulation: development, evaluation, and optimization using 3(3) factorial design.

    abstract::The present investigation concerns with the development and optimization of an in situ forming formulation using 3(3) full factorial design experimentation. Metformin, an antidiabetic drug with upper part of gastrointestinal tract as absorption window was used as a model drug. The formulations were designed with an ob...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-009-9285-3

    authors: Nagarwal RC,Srinatha A,Pandit JK

    更新日期:2009-01-01 00:00:00

  • Development and evaluation of a floating multiparticulate gastroretentive system for modified release of AZT.

    abstract::The aim of this study was to develop and evaluate a floating multiparticulate gastroretentive system for the modified release of zidovudine (AZT). AZT was used as a model drug water-soluble at therapeutic doses. The floating gastroretentive system was obtained by co-precipitation, after solvent diffusion and evaporati...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-011-9627-9

    authors: Yoshida VM,de Oliveira Junior JM,Gonçalves MM,Vila MM,Chaud MV

    更新日期:2011-06-01 00:00:00

  • Formulation and release behavior of doxycycline-alginate hydrogel microparticles embedded into pluronic F127 thermogels as a potential new vehicle for doxycycline intradermal sustained delivery.

    abstract::The aim of this work was the formulation and characterization of alginate (ALG)-doxycycline (DOX) hydrogel microparticles (MPs) embedded into Pluronic F127 thermogel for DOX intradermal sustained delivery. ALG-DOX MPs were formed by adding a solution of the drug into a 1.5% polymer solution while stirring. The MPs wer...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-009-9361-8

    authors: Giovagnoli S,Tsai T,DeLuca PP

    更新日期:2010-03-01 00:00:00

  • Evaluation of functional stability of quercetin as a raw material and in different topical formulations by its antilipoperoxidative activity.

    abstract::The present study evaluates the antioxidant activity of the flavonol quercetin, and its functional stability as a raw material and when added in formulations. The iron-chelating activity was determined using the bathophenanthroline assay, and the functional stability was evaluated with the antilipoperoxidative assay. ...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/pt070110

    authors: Casagrande R,Georgetti SR,Verri WA Jr,Jabor JR,Santos AC,Fonseca MJ

    更新日期:2006-02-03 00:00:00

  • Assessment Methodology for Process Validation Lifecycle Stage 3A.

    abstract::The paper introduces evaluation methodologies and associated statistical approaches for process validation lifecycle Stage 3A. The assessment tools proposed can be applied to newly developed and launched small molecule as well as bio-pharma products, where substantial process and product knowledge has been gathered. T...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章,评审

    doi:10.1208/s12249-016-0641-9

    authors: Sayeed-Desta N,Pazhayattil AB,Collins J,Chen S,Ingram M,Spes J

    更新日期:2017-07-01 00:00:00

  • A Quality by Experimental Design Approach to Assess the Effect of Formulation and Process Variables on the Extrusion and Spheronization of Drug-Loaded Pellets Containing Polyplasdone® XL-10.

    abstract::Successful pellet production has been reported in literature with cross-linked poly(vinylpyrrolidone), Polyplasdone® XL-10 and INF-10. In the present study, a quality by experimental design approach was used to assess several formulation and process parameter effects on the characteristics of Polyplasdone® XL-10 pelle...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-015-0345-6

    authors: Saripella KK,Loka NC,Mallipeddi R,Rane AM,Neau SH

    更新日期:2016-04-01 00:00:00

  • Correction for irrelevant absorption in multicomponent spectrophotometric assay of riboflavin, formylmethylflavin, and degradation products: kinetic applications.

    abstract::In the spectrophotometric assay of multicomponent systems involved in drug degradation studies, some minor or unknown degradation products may be present. These products may interfere in the assay and thus invalidate the results due to their absorption in the range of analytical wavelengths. This interference may be e...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-013-9998-1

    authors: Ahmad I,Qadeer K,Iqbal K,Ahmed S,Sheraz MA,Ali SA,Mirza T,Hafeez A

    更新日期:2013-09-01 00:00:00

  • Improvement of aripiprazole solubility by complexation with (2-hydroxy)propyl-β-cyclodextrin using spray drying technique.

    abstract::Due to the fact that the number of new poorly soluble active pharmaceutical ingredients is increasing, it is important to investigate the possibilities of improvement of their solubility in order to obtain a final pharmaceutical formulation with enhanced bioavailability. One of the strategies to increase drug solubili...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-012-9786-3

    authors: Mihajlovic T,Kachrimanis K,Graovac A,Djuric Z,Ibric S

    更新日期:2012-06-01 00:00:00

  • Optimization, in-vitro Release and in-vivo Evaluation of Gliquidone Nanoparticles.

    abstract::The present work embarks upon increasing the dissolution rate and the bioavailability of model anti-diabetic drug, gliquidone, a sulfonylurea class drug used for treating diabetes mellitus type 2. The gliquidone nanoparticles were prepared by using anti-solvent precipitation technique in which, gliquidone solution in ...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-019-1577-7

    authors: Mohamed MS,Abdelhafez WA,Zayed G,Samy AM

    更新日期:2019-12-26 00:00:00

  • Effects of the Preparation Process on the Properties of Amorphous Solid Dispersions.

    abstract::The use of amorphous solid dispersions to improve the bioavailability of active ingredients from the BCS II and IV classifications continues to gain interest in the pharmaceutical industry. Over the last decade, methods for generating amorphous solid dispersions have been well established in commercially available pro...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章,评审

    doi:10.1208/s12249-017-0861-7

    authors: Huang S,Williams RO 3rd

    更新日期:2018-07-01 00:00:00

  • Cellulose Acetate Butyrate: Ammonio Methacrylate Copolymer Blends as a Novel Coating in Osmotic Tablets.

    abstract::The objective of this work was the preparation of osmotic tablets using polymer blends of cellulose acetate butyrate (CAB) or ethylcellulose with ammonio methacrylate copolymer (Eudragit® RL). The advantage of these coatings in comparison to the traditionally used cellulose acetate is their solubility in safer organic...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-017-0825-y

    authors: Ali R,Walther M,Bodmeier R

    更新日期:2018-01-01 00:00:00

  • Human Serum Albumin, a Suitable Candidate to Stabilize Freeze-Dried IgG in Combination with Trehalose: Central Composite Design.

    abstract::Freeze-dried immunoglobulin G (IgG) incorporating trehalose and human serum albumin (HSA) was statistically evaluated regarding the existence of synergism between additives on the stability profile. The levels of HSA (X1) and trehalose (X2) were independent variables. Aggregation following the process (Y1), after 2 an...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-019-1509-6

    authors: Nouraei MS,Faghihi H,Najafabadi AR,Zadeh AHM,Darabi M,Vatanara A

    更新日期:2019-10-28 00:00:00

  • Delivery Systems as Vital Tools in Drug Repurposing.

    abstract::The process of developing an old drug for new indications is now a widely accepted strategy of shortening drug development time, reducing drug costs, and improving drug availability, especially for rare and neglected diseases. In this mini-review, we highlighted the impact of drug delivery systems in the fulfillment o...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章,评审

    doi:10.1208/s12249-019-1333-z

    authors: Czech T,Lalani R,Oyewumi MO

    更新日期:2019-02-15 00:00:00

  • Preparation of Gastro-retentive Tablets Employing Controlled Superporous Networks for Improved Drug Bioavailability.

    abstract::The development of an oral formulation that ensures increased bioavailability of drugs is a great challenge for pharmaceutical scientists. Among many oral formulation systems, a drug delivery system employing superporous networks was developed to provide a prolonged gastro-retention time as well as improved bioavailab...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-020-01851-5

    authors: Le TN,Her J,Sim T,Jung CE,Kang JK,Oh KT

    更新日期:2020-11-12 00:00:00

  • Interfacial Stress and Container Failure During Freezing of Bulk Protein Solutions Can Be Prevented by Local Heating.

    abstract::Bottles and carboys are used for frozen storage and transport of biopharmaceutical formulations under a wide range of conditions. The quality of freezing and thawing in these systems has been questioned due to the formation of heterogeneous ice structures and deformation of containers. This work shows that during free...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-020-01794-x

    authors: Duarte A,Rego P,Ferreira A,Dias P,Geraldes V,Rodrigues MA

    更新日期:2020-09-01 00:00:00

  • Mechanical Characterization and Dissolution of Chewing Gum Tablets (CGTs) Containing Co-compressed Health in Gum® and Curcumin/Cyclodextrin Inclusion Complex.

    abstract::Curcumin chewing gums could be therapeutically beneficial if used by the head and neck cancer patients. High curcumin loading in chewing gums however is needed to achieve desired therapeutic effect. Preparing gums with high drug load is nonetheless challenging because of the negative impact of solids on their masticat...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-018-1174-1

    authors: Al Hagbani T,Altomare C,Kamal MM,Nazzal S

    更新日期:2018-11-01 00:00:00

  • Whey protein/polysaccharide-stabilized emulsions: Effect of polymer type and pH on release and topical delivery of salicylic acid.

    abstract::Emulsions are widely used as topical formulations in the pharmaceutical and cosmetic industries. They are thermodynamically unstable and require emulsifiers for stabilization. Studies have indicated that emulsifiers could affect topical delivery of actives, and this study was therefore designed to investigate the effe...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-014-0081-3

    authors: Combrinck J,Otto A,du Plessis J

    更新日期:2014-06-01 00:00:00

  • Self-microemulsifying Drug Delivery System for Improved Oral Delivery of Limonene: Preparation, Characterization, in vitro and in vivo Evaluation.

    abstract::The current investigation aimed at formulating self-microemulsifying drug delivery system (SMEDDS) to ameliorate oral bioavailability of a hydrophobic functional ingredient, limonene. Solubility test, compatibility test, and pseudo-ternary phase diagrams (PTPD) were adopted to screen the optimal compositions of limone...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-019-1361-8

    authors: Zhu Y,Xu W,Zhang J,Liao Y,Firempong CK,Adu-Frimpong M,Deng W,Zhang H,Yu J,Xu X

    更新日期:2019-03-26 00:00:00

  • Artemisia arborescens L essential oil-loaded solid lipid nanoparticles for potential agricultural application: preparation and characterization.

    abstract::The aim of this study was to formulate a new delivery system for ecological pesticides by the incorporation of Artemisia arborescens L essential oil into solid lipid nanoparticles (SLN). Two different SLN formulations were prepared following the high-pressure homogenization technique using Compritol 888 ATO as lipid a...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/pt070102

    authors: Lai F,Wissing SA,Müller RH,Fadda AM

    更新日期:2006-01-03 00:00:00

  • High-Molecular-Weight Hypromellose from Three Different Suppliers: Effects of Compression Speed, Tableting Equipment, and Moisture on the Compaction.

    abstract::Use of higher tableting speeds is gaining increasing importance for pharmaceutical industry. There is a profound lack of new studies of mechanical properties of hypromellose, and none of them evaluate different suppliers. Thus, the objective of this study was to investigate flow and compaction properties of different ...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-020-01688-y

    authors: Grdešič P,Paudel A,German Ilić I

    更新日期:2020-07-22 00:00:00