Abstract：
:Thallium bromide iodide crystal also known as KRS-5 is the well known material used in far infrared radiation applications for optical windows and lenses fabrication. The main advantage of this material is the transparency in wide band of wavelengths from 0.53 to 50μm. Despite such advantages as transparency and large acousto-optic figure of merit values, KRS-5 is rarely used in acousto-optics. Nevertheless this material seems to be promising for far infrared acousto-optic applications. The acoustic and acousto-optic properties of KRS-5 needed for the full use in optoelectronics are not well understood to date. In this paper the detailed examination of thallium bromide iodide crystal acoustic properties is presented.
journal_name
Ultrasonicsjournal_title
Ultrasonicsauthors
Mantsevich SNdoi
10.1016/j.ultras.2016.11.019subject
Has Abstractpub_date
2017-03-01 00:00:00pages
91-97eissn
0041-624Xissn
1874-9968pii
S0041-624X(16)30325-0journal_volume
75pub_type
杂志文章相关文献
ULTRASONICS文献大全abstract：:An inversion algorithm (termed AEDep) is proposed for estimating the depth of acoustic emission (AE) sources in plate-like structural components. The work is motivated by the need for characterizing early-stage fatigue crack growth in such components. The algorithm achieves depth estimation by automatically extracting...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2019.105975
更新日期：2019-11-01 00:00:00
abstract：:Ultrasound evaluation permits the state of rocks to be determined quickly and cheaply, satisfying the demands faced by today's producers of ornamental stone, such as environmental sustainability, durability and safety of use. The basic objective of the present work is to analyse and develop the usefulness of ultrasoun...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2013.06.006
更新日期：2014-01-01 00:00:00
abstract：:In many ultrasound applications-especially in the area of medical diagnostics-conventional sensors and particularly piezoelectric hydrophones do not comply with the requirements for "point detectors". It therefore suggests itself to develop methods, which allow ultrasonic fields to be reconstructed from the spatially ...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/s0041-624x(02)00346-3
更新日期：2002-08-01 00:00:00
abstract：:This study investigated the effect of LIPUS on fracture healing when fractures were exposed to ultrasound at three axial distances: z=0 mm, 60 mm, and 130 mm. We applied LIPUS to rat fracture at these three axial distances mimicking the exposure condition of human fractures at different depths under the soft tissue. M...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2013.10.013
更新日期：2014-03-01 00:00:00
abstract：:The paper investigates the existence of interfacial (Stoneley-type) acoustic waves localised at the internal boundary between two semi-infinite superlattices which are adjoined with each other to form one-dimensional phononic bicrystal. Each superlattice is a periodic sequence of perfectly bonded homogeneous and/or fu...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2020.106237
更新日期：2021-01-01 00:00:00
abstract：:The Mössbauer and X-rays analysis of as-received Fe-powder and Fe-powder mechanically alloyed with C using high power ultrasonics were carried out. The powder blend of Fe-powder and graphite was processed in He environment during 5 to 50 h. The dissolution of carbon in iron particles and inhomogeneous distribution of ...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2004.01.002
更新日期：2004-04-01 00:00:00
abstract：:Numerical simulations of bubble oscillations in liquid water irradiated by an ultrasonic wave are performed for various acoustic amplitudes and various ambient pressures. In the numerical simulations, effect of non-equilibrium evaporation and condensation of water vapor at the bubble wall and that of chemical reaction...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2003.12.005
更新日期：2004-04-01 00:00:00
abstract：:This paper introduces a new beamformer, which combines the eigenspace based minimum variance (ESBMV) beamformer with a subarray coherence based postfilter (SCBP), for improving the quality of ultrasound plane-wave imaging. The ESBMV beamformer has been validated in improving the imaging contrast, but the difficulty in...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2015.10.026
更新日期：2016-02-01 00:00:00
abstract：:This work is concerned with the reconstruction, from measured (synthetic or real) data, of a 2D penetrable fluid-like object of arbitrary cross-section embedded in a fluid of infinite extent and insonified by a plane acoustic wave. Green's theorem is used to provide a domain integral representation of the scattered fi...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/s0041-624x(00)00054-8
更新日期：2001-03-01 00:00:00
abstract：:The acoustic source localization technique for anisotropic plates proposed by the authors in an earlier publication ([1] Kundu et al., 2012) is improved in this paper by adopting some modifications. The improvements are experimentally verified on anisotropic flat and curved composite plates. Difficulties associated wi...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2014.03.001
更新日期：2014-09-01 00:00:00
abstract：:A coordinated theoretical, numerical and experimental study is carried out in an effort to interpret the characteristics of propagating guided Lamb wave modes in presence of a high-density (HD) core region in a honeycomb composite sandwich structure (HCSS). Initially, a two-dimensional (2D) semi-analytical model based...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2016.05.025
更新日期：2016-09-01 00:00:00
abstract：:Surface acoustic wave (SAW) waveguide resonator is formed by a ring-shaped strip of copper 10 microm wide and approximately 130 microm in diameter embedded into a 0.8 microm thick layer of silica on a silicon wafer. SAWs are excited at one side of the copper ring by a short laser pulse focused into a spatially periodi...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2008.04.007
更新日期：2009-01-01 00:00:00
abstract：:As known, anomalous resisto-acoustic effect is a fundamental property for weakly inhomogeneous piezoactive waves (Bleustein-Gulyaev, Love, and some leaky waves). It consists in that the velocity of aforementioned waves first increases, achieves its maximum, and only then decreases with increasing conductance of a laye...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2015.01.007
更新日期：2015-05-01 00:00:00
abstract：:Focused ultrasound holds promise in a large number of therapeutic applications. It has long been known that high intensity focused ultrasound can kill tissue through coagulative necrosis. However, it is only in recent years that practical clinical applications are becoming possible, with the development of high power ...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2004.04.003
更新日期：2004-08-01 00:00:00
abstract：:This paper describes ultrasonic measurements of normal and tangential stiffnesses of the contacting interface between polished aluminum blocks subjected to nominal contact pressures up to about 3.8 MPa. These stiffnesses were evaluated by ultrasonic spectroscopy methods for the bulk (longitudinal and transverse) wave ...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2007.08.005
更新日期：2007-12-01 00:00:00
abstract：:In this paper, the resonance frequency equation and expression of displacement amplitude magnifications of a full-wave barber ultrasonic horn are obtained. By discussing the relationships between the displacement amplitude magnifications and the geometrical dimensions, the optimized design of the horn for the largest ...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2011.12.006
更新日期：2012-07-01 00:00:00
abstract：:The present study investigated the effect of geometric parameters of the ultrasound instrument during meat salting in order to enhance salt diffusion and salt distribution in pork meat on a lab scale. The effects of probe size (∅2.5 and 1.3cm) and of different distances between the transducer and the meat sample (0.3,...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2017.03.017
更新日期：2018-02-01 00:00:00
abstract：:Although, high resolution, real-time ultrasonic (US) imaging is routinely available, image interpretation is based on grey-level and texture and quantitative evaluation is limited. Other potentially useful diagnostic information from US echoes may include modifications in tissue acoustic parameters (speed, attenuation...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2004.09.002
更新日期：2005-03-01 00:00:00
abstract：:This paper presents the results of the theoretical and 2D FEM modeling excitation and detection of evanescent acoustic waves in piezoelectric plates. By application of 2D ordinary differential equations derived by Auld, we obtained the dispersion curves of A1 and SH1 waves in YX LiNbO3 and YX KNbO3 plates in proximity...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2019.105961
更新日期：2019-11-01 00:00:00
abstract：:Laser ultrasonic is a most promising method for non-destructive evaluation of residual stress. The residual stress of thin steel plate is measured by laser ultrasonic technique. The pre-stress loading device is designed which can easily realize the condition of the specimen being laser ultrasonic tested at the same ti...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2016.08.013
更新日期：2017-01-01 00:00:00
abstract：:We present a method to generate sub-microsecond quasi-unipolar pressure pulses. Our approach is based on the laser irradiation of a thin copper wire submerged in water. The acoustic waveforms were recorded using two different, well characterized, wideband detection techniques: piezoelectric and optical interferometry....
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2019.05.002
更新日期：2019-09-01 00:00:00
abstract：:The main component of every device used for investigating internal object structure by Ultrasound Transmission Tomography (UTT) is a special ultrasonic probe. This paper presents the structure of model multielement ring probe for examining objects using this method in divergent ray projection geometry. The probe is ma...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2006.05.126
更新日期：2006-12-22 00:00:00
abstract：:Knowing the low-frequency response of hydrophones, down to 100 kHz at least, is important for accurate biomedical ultrasound measurements. However, current international standards do not extend below 500 kHz. Furthermore, commercial hydrophone sources typically do not supply sensitivity data below 1-2 MHz. Therefore, ...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2003.12.008
更新日期：2004-04-01 00:00:00
abstract：:In the present paper, we report the first results concerning a centimetre cantilever driven through non-linear effects in thin magnetostrictive films. Bimorph centimetre beams (24 mm x 5 mm) were designed using 160 microns thick glass and 0.4 micron thick multilayer TbFe/Fe films deposited via RF sputtering, using sev...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/s0041-624x(99)00061-x
更新日期：2000-03-01 00:00:00
abstract：:Three-dimensional (3D) elastic wave simulations can be used to investigate and optimize nondestructive evaluation (NDE) and structural health monitoring (SHM) ultrasonic damage detection techniques for aerospace materials. 3D anisotropic elastodynamic finite integration technique (EFIT) has been implemented for ultras...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2013.05.007
更新日期：2014-01-01 00:00:00
abstract：MOTIVATION:Commercial ultrasound machines in the past did not provide the ultrasound researchers access to raw ultrasound data. Lack of this ability has impeded evaluation and clinical testing of novel ultrasound algorithms and applications. OBJECTIVES:Recently, we developed a flexible ultrasound back-end where all th...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2007.11.009
更新日期：2008-07-01 00:00:00
abstract：:A cylindrical standing wave ultrasonic motor using bending vibration transducer was proposed in this paper. The proposed stator contains a cylinder and a bending vibration transducer. The two combining sites between the cylinder and the transducer locate at the adjacent wave loops of bending vibration of the transduce...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2010.12.007
更新日期：2011-07-01 00:00:00
abstract：:The digital ultrasonic fixed path interferometer designed for testing small amounts of sample was used for the investigation of whole blood coagulation, retraction and clot melting processes. The ultrasound velocity and absorption are determined from the characteristics of an acoustic resonator consisting of an emitte...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/0041-624x(78)90007-0
更新日期：1978-01-01 00:00:00
abstract：:A new method of spatial compound imaging is presented that improves image quality without the usual requirement to decrease the frame rate. The new method of imaging utilizes three transducers for data acquisition. The transducer located at the center of the transducer system is a phased array probe that acts as both ...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/s0041-624x(03)00105-7
更新日期：2003-07-01 00:00:00
abstract：:The study is aimed to perform dynamic modeling of a part feeder powered by piezoelectric actuation. This part feeder consists mainly of a horizontal platform vibrated by a pair of parallel piezoelectric bimorph beams. Owing to intermittent impacts with the platform, the transported part on the platform is able to marc...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2007.02.002
更新日期：2007-06-01 00:00:00
