Biomechanical properties of female dolphin reproductive tissue.

Abstract:

:Whales, dolphins, and porpoises have unusual vaginal folds of unknown function(s) that are hypothesized to play an important role in sexual selection. The potential function of vaginal folds was assessed by testing the mechanical properties of common bottlenose dolphin (Tursiops truncatus) reproductive tract tissues in 6 different regions and across age classes in post-mortem specimens. We assessed the regional (local) and overall effective elastic modulus of tissues using indentation and tensile tests, respectively. We explore the non-linear mechanical response of biological tissues, which are not often quantified. Indentation tests demonstrated that sexual maturity state, tissue region, force history, and force magnitude values significantly affected the measured effective elastic modulus. Tissue was stiffest in the vaginal fold region and overall stiffer in sexually immature compared to mature animals, likely reflecting biomechanical adaptations associated with copulation and parturition. Tensile tests showed that only tissue region significantly affected the effective modulus. Our data support the hypothesis that vaginal folds function as mechanical barriers to the penis and may provide females with mechanisms to reduce copulatory forces on other reproductive tissue. STATEMENT OF SIGNIFICANCE: Cetaceans have unusual folds of vaginal wall tissue that appear to evolve under sexual selection mechanisms and present physical barriers to the penis during copulation. We explore the biomaterial properties of vaginal fold tissue, how it varies from other reproductive tract tissues, and ontogenetic patterns. We demonstrate that vaginal folds can withstand higher mechanical forces and respond in a manner conducive to dissipating copulatory forces to other reproductive tissues. This study yields exciting insights on how female genital tissue may function during copulation, and is the first to do so in any vertebrate species. Additionally, we provide an example for testing biological tissues, non-linear properties, and materials with uneven surface structure and uneven thickness.

journal_name

Acta Biomater

journal_title

Acta biomaterialia

authors

Orbach DN,Rattan S,Hogan M,Crosby AJ,Brennan PLR

doi

10.1016/j.actbio.2019.01.012

subject

Has Abstract

pub_date

2019-03-01 00:00:00

pages

117-124

eissn

1742-7061

issn

1878-7568

pii

S1742-7061(19)30032-7

journal_volume

86

pub_type

杂志文章
  • Fabrication and characterisation of protein fibril-elastomer composites.

    abstract::Protein fibrils are emerging as a novel class of functional bionanomaterials. In this paper we make use of their rigidity by combining lysozyme fibrils with a silicone elastomer and demonstrating that at a filling ratio of 10%, the protein fibril composite is at minimum 2 times stiffer than a CNT elastomeric composite...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2009.10.013

    authors: Oppenheim T,Knowles TP,Lacour SP,Welland ME

    更新日期:2010-04-01 00:00:00

  • Fabrication and evaluation of Zn containing fluoridated hydroxyapatite layer with Zn release ability.

    abstract::A biphasic layer with a Zn-containing beta-tricalcium phosphate (ZnTCP) phase and a fluoridated hydroxyapatite (FHA) phase on titanium alloy substrate was prepared by the sol-gel technique. Scanning electron microscopy and energy-dispersive X-ray analysis results showed the ZnTCP/FHA layer to have a heterogeneous surf...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2007.08.013

    authors: Miao S,Cheng K,Weng W,Du P,Shen G,Han G,Yan W,Zhang S

    更新日期:2008-03-01 00:00:00

  • X-ray diffraction and in situ pressurization of dentine apatite reveals nanocrystal modulus stiffening upon carbonate removal.

    abstract::Bone-like materials comprise carbonated-hydroxyapatite nanocrystals (c-Ap) embedding a fibrillar collagen matrix. The mineral particles stiffen the nanocomposite by tight attachment to the protein fibrils creating a high strength and toughness material. The nanometer dimensions of c-Ap crystals make it very challengin...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2020.09.004

    authors: Forien JB,Uzuhashi J,Ohkubo T,Hono K,Luo L,Schwarcz HP,Deymier AC,Krywka C,Fleck C,Zaslansky P

    更新日期:2021-01-15 00:00:00

  • Bovine and equine peritubular and intertubular dentin.

    abstract::Dentin contains 1-2μm diameter tubules extending from the pulp cavity to near the junction with enamel. Peritubular dentin (PTD) borders the tubule lumens and is surrounded by intertubular dentin (ITD). Differences in PTD and ITD composition and microstructure remain poorly understood. Here, a (∼200nm)(2), 10.1keV syn...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2014.05.027

    authors: Stock SR,Deymier-Black AC,Veis A,Telser A,Lux E,Cai Z

    更新日期:2014-09-01 00:00:00

  • Reducing immunoreactivity of porcine bioprosthetic heart valves by genetically-deleting three major glycan antigens, GGTA1/β4GalNT2/CMAH.

    abstract::Bioprosthetic heart valves (BHVs) originating from pigs are extensively used for heart valve replacement in clinics. However, recipient immune responses associated with chronic calcification lead to structural valve deterioration (SVD) of BHVs. Two well-characterized epitopes on porcine BHVs have been implicated in SV...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2018.03.055

    authors: Zhang R,Wang Y,Chen L,Wang R,Li C,Li X,Fang B,Ren X,Ruan M,Liu J,Xiong Q,Zhang L,Jin Y,Zhang M,Liu X,Li L,Chen Q,Pan D,Li R,Cooper DKC,Yang H,Dai Y

    更新日期:2018-05-01 00:00:00

  • Suture-reinforced electrospun polydioxanone-elastin small-diameter tubes for use in vascular tissue engineering: a feasibility study.

    abstract::This study characterizes the cross-linking of electrospun elastin and the mechanical properties of suture-reinforced 1.5mm internal diameter electrospun tubes composed of blended polydioxanone (PDO) and soluble elastin. Several tube configurations were tested to assess the effects of reinforcement on tube mechanical p...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2007.08.001

    authors: Smith MJ,McClure MJ,Sell SA,Barnes CP,Walpoth BH,Simpson DG,Bowlin GL

    更新日期:2008-01-01 00:00:00

  • Mineralized nanofiber segments coupled with calcium-binding BMP-2 peptides for alveolar bone regeneration.

    abstract::Bone loss around tooth extraction sites can occur, thus making future placement of dental implants difficult. Alveolar bone regeneration can be guided by the application of a nanofibrous bone graft coupled with osteoinductive proteins/peptides, following tooth loss or tooth extraction. In the present study, we demonst...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2018.12.051

    authors: Boda SK,Almoshari Y,Wang H,Wang X,Reinhardt RA,Duan B,Wang D,Xie J

    更新日期:2019-02-01 00:00:00

  • Cold atmospheric pressure gas plasma enhances the wear performance of ultra-high molecular weight polyethylene.

    abstract::Ultra-high molecular weight polyethylene (UHMWPE) is frequently employed in joint replacements because of its high biocompatibility; however, this material does not exhibit particularly strong wear performance, thus potentially reducing the longevity of such devices. Numerous techniques have been investigated to incre...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2011.12.007

    authors: Perni S,Kong MG,Prokopovich P

    更新日期:2012-03-01 00:00:00

  • Manufacturing of hydrogel biomaterials with controlled mechanical properties for tissue engineering applications.

    abstract::Hydrogels have been recognized as crucial biomaterials in the field of tissue engineering, regenerative medicine, and drug delivery applications due to their specific characteristics. These biomaterials benefit from retaining a large amount of water, effective mass transfer, similarity to natural tissues and the abili...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章,评审

    doi:10.1016/j.actbio.2017.07.028

    authors: Vedadghavami A,Minooei F,Mohammadi MH,Khetani S,Rezaei Kolahchi A,Mashayekhan S,Sanati-Nezhad A

    更新日期:2017-10-15 00:00:00

  • Nanocomposite hydrogels stabilized by self-assembled multivalent bisphosphonate-magnesium nanoparticles mediate sustained release of magnesium ion and promote in-situ bone regeneration.

    abstract::Hydrogels are appealing biomaterials for applications in regenerative medicine due to their tunable physical and bioactive properties. Meanwhile, therapeutic metal ions, such as magnesium ion (Mg2+), not only regulate the cellular behaviors but also stimulate local bone formation and healing. However, the effective de...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2017.09.039

    authors: Zhang K,Lin S,Feng Q,Dong C,Yang Y,Li G,Bian L

    更新日期:2017-12-01 00:00:00

  • Advanced technology-driven therapeutic interventions for prevention of tendon adhesion: design, intrinsic and extrinsic factor considerations.

    abstract::Tendon adhesion formation describes the development of fibrotic tissue between the tendon and its surrounding tissues, which commonly occurs as a reaction to injury or surgery. Its impact on function and quality of life varies from negligible to severely disabling, depending on the affected area and extent of adhesion...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章,评审

    doi:10.1016/j.actbio.2021.01.027

    authors: Zhang Q,Yang Y,Yildirimer L,Xu T,Zhao X

    更新日期:2021-01-25 00:00:00

  • Cancellous bone-like porous Fe@Zn scaffolds with core-shell-structured skeletons for biodegradable bone implants.

    abstract::Three-dimensional (3D) porous zinc (Zn) with a moderate degradation rate is a promising candidate for biodegradable bone scaffolds. However, fabrication of such scaffolds with adequate mechanical properties remains a challenge. Moreover, the composition, crystallography and microstructure of the in vivo degradation pr...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2020.11.032

    authors: He J,Fang J,Wei P,Li Y,Guo H,Mei Q,Ren F

    更新日期:2021-02-01 00:00:00

  • Fibrin-based 3D matrices induce angiogenic behavior of adipose-derived stem cells.

    abstract::Engineered three-dimensional biomaterials are known to affect the regenerative capacity of stem cells. The extent to which these materials can modify cellular activities is still poorly understood, particularly for adipose-derived stem cells (ASCs). This study evaluates PEGylated fibrin (P-fibrin) gels as an ASC-carry...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2015.01.012

    authors: Chung E,Rytlewski JA,Merchant AG,Dhada KS,Lewis EW,Suggs LJ

    更新日期:2015-04-01 00:00:00

  • Superhydrophobic effect on the adsorption of human serum albumin.

    abstract::Analytical protocol greatly influences the measurement of human serum albumin (HSA) adsorption to commercial expanded polytetrafluororethylene (ePTFE) exhibiting superhydrophobic wetting properties. Degassing of buffer solutions and evacuation of ePTFE adsorbent to remove trapped air immediately prior to contact with ...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2008.11.003

    authors: Leibner ES,Barnthip N,Chen W,Baumrucker CR,Badding JV,Pishko M,Vogler EA

    更新日期:2009-06-01 00:00:00

  • Investigation of alendronate-doped apatitic cements as a potential technology for the prevention of osteoporotic hip fractures: critical influence of the drug introduction mode on the in vitro cement properties.

    abstract::Combination of a bisphosphonate (BP) anti-osteoporotic drug, alendronate, with an apatitic calcium phosphate cement does not significantly affect the main properties of the biomaterial, in terms of injectability and setting time, provided that the BP is introduced chemisorbed onto calcium-deficient apatite, one of the...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2010.09.017

    authors: Schnitzler V,Fayon F,Despas C,Khairoun I,Mellier C,Rouillon T,Massiot D,Walcarius A,Janvier P,Gauthier O,Montavon G,Bouler JM,Bujoli B

    更新日期:2011-02-01 00:00:00

  • On the design of dental resin-based composites: a micromechanical approach.

    abstract::Adhesive resin-based restorative materials have the potential to considerably strengthen teeth and offer more economically viable alternatives to traditional materials such as gold, amalgam or ceramics. Other advantages are direct and immediate placement and the elimination of the use of mercury. However, polymerizati...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2007.06.011

    authors: Kahler B,Kotousov A,Swain MV

    更新日期:2008-01-01 00:00:00

  • Thermoresponsive, in situ cross-linkable hydrogels based on N-isopropylacrylamide: fabrication, characterization and mesenchymal stem cell encapsulation.

    abstract::Hydrogels that solidify in response to a dual, physical and chemical, mechanism upon temperature increase were fabricated and characterized. The hydrogels were based on N-isopropylacrylamide, which renders them thermoresponsive, and contained covalently cross-linkable moieties in the macromers. The effects of the macr...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2010.12.027

    authors: Klouda L,Perkins KR,Watson BM,Hacker MC,Bryant SJ,Raphael RM,Kasper FK,Mikos AG

    更新日期:2011-04-01 00:00:00

  • Lubricin and smooth muscle α-actin-containing myofibroblasts in the pseudomembranes around loose hip and knee prostheses.

    abstract::The objective was to evaluate the presence and distribution of the lubricating and anti-adhesion glycoprotein lubricin and cells containing the contractile isoform smooth muscle α-actin (SMA) in pseudomembranes around loose hip prostheses. Periprosthetic tissue was obtained at revision arthroplasty of eight aseptic, l...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2012.11.010

    authors: Cheriyan T,Ready JE,Brick GW,Martin SD,Martin TL,Schmid TM,Padera RF,Spector M

    更新日期:2013-03-01 00:00:00

  • Hepatocyte spheroid culture on fibrous scaffolds with grafted functional ligands as an in vitro model for predicting drug metabolism and hepatotoxicity.

    abstract::The identification of a biologic substrate for maintaining hepatocyte functions is essential to provide reliable and predictable models for in vitro drug screening. In the current study, a three-dimensional culture of hepatocytes was established on highly porous fibrous scaffolds with grafted galactose and RGD to affo...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2015.09.027

    authors: Yan S,Wei J,Liu Y,Zhang H,Chen J,Li X

    更新日期:2015-12-01 00:00:00

  • Preliminary evaluation of molecular imprinting of 5-fluorouracil within hydrogels for use as drug delivery systems.

    abstract::Molecular imprinting is a new and rapidly evolving technique used to create synthetic receptors and it possesses great potential in a number of applications in the life sciences. Keeping in mind the therapeutic importance of 5-fluorouracil (5-FU) and the technological significance of molecular imprinting polymers, the...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2008.03.017

    authors: Singh B,Chauhan N

    更新日期:2008-09-01 00:00:00

  • An injectable hydrogel using an immunomodulating gelator for amplified tumor immunotherapy by blocking the arginase pathway.

    abstract::Arginase 1 (ARG1) inactivates T cells by degrading L-arginine, severely reducing the immunotherapeutic efficacy. Effectively blocking the ARG1 pathway remains a challenge. L-norvaline is a very cheap and negligible side effects inhibitor of ARG1. However, its blockage efficacy for ARG1 is impeded by its high half-maxi...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2021.01.041

    authors: Ren X,Wang N,Zhou Y,Song A,Jin G,Li Z,Luan Y

    更新日期:2021-01-29 00:00:00

  • Approaching the compressive modulus of articular cartilage with a decellularized cartilage-based hydrogel.

    abstract:UNLABELLED:ECM-based materials are appealing for tissue engineering strategies because they may promote stem cell recruitment, cell infiltration, and cell differentiation without the need to supplement with additional biological factors. Cartilage ECM has recently shown potential to be chondroinductive, particularly in...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2016.04.019

    authors: Beck EC,Barragan M,Tadros MH,Gehrke SH,Detamore MS

    更新日期:2016-07-01 00:00:00

  • Porous ceramic titanium dioxide scaffolds promote bone formation in rabbit peri-implant cortical defect model.

    abstract::Titanium oxide (TiO₂) scaffolds have previously been reported to exhibit very low mechanical strength. However, we have been able to produce a scaffold that features a high interconnectivity, a porosity of 91% and a compressive strength above 1.2 MPa. This study analyzed the in vivo performance of the porous TiO₂ scaf...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2012.09.009

    authors: Haugen HJ,Monjo M,Rubert M,Verket A,Lyngstadaas SP,Ellingsen JE,Rønold HJ,Wohlfahrt JC

    更新日期:2013-02-01 00:00:00

  • Femtosecond laser induced nano-textured micropatterning to regulate cell functions on implanted biomaterials.

    abstract::Posterior capsular opacification (PCO) is the most common complication of cataract surgery. PCO is due to the proliferation, migration, and epithelial-to-mesenchymal transition of the residual lens epithelial cells (LECs) within the lens capsule. As surface topography influences cellular response, we investigated the ...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2020.08.044

    authors: Seo Y,Kim S,Lee HS,Park J,Lee K,Jun I,Seo H,Kim YJ,Yoo Y,Choi BC,Seok HK,Kim YC,Ok MR,Choi J,Joo CK,Jeon H

    更新日期:2020-10-15 00:00:00

  • First-principles studies on alloying and simplified thermodynamic aqueous chemical stability of calcium-, zinc-, aluminum-, yttrium- and iron-doped magnesium alloys.

    abstract::In the present study, the density functional theory implemented in the Vienna Ab-initio Simulation Package has been used to investigate the alloying effects of different elements of calcium, zinc, yttrium, aluminum and iron when introduced in the Mg crystal lattice. In particular, studies have been conducted to invest...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2009.08.016

    authors: Velikokhatnyi OI,Kumta PN

    更新日期:2010-05-01 00:00:00

  • Production of highly aligned collagen lamellae by combining shear force and thin film confinement.

    abstract::Load-bearing tissues owe their mechanical strength to their highly anisotropic collagenous structure. To date attempts to engineer mechanically strong connective tissue have failed, mainly due to a lack of ability to reproduce the native collagen organization in constructs synthesized by cultured cells in vitro. The a...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2011.02.038

    authors: Saeidi N,Sander EA,Zareian R,Ruberti JW

    更新日期:2011-06-01 00:00:00

  • Characterizing multilaminated hydrogels with spatially varying network structure and solute loading using confocal laser scanning microscopy.

    abstract::Multilaminated controlled release devices were formed through photopolymerization techniques to produce hydrogels with spatially varying solute loadings and network structures composed of poly(hydroxyl ethyl methacrylate) (PHEMA) and poly(ethylene glycol) (PEG). Using low molecular weight fluorescent dyes as model dru...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2006.11.006

    authors: Watkins AW,Southard SL,Anseth KS

    更新日期:2007-07-01 00:00:00

  • Crosslinked collagen hydrogels as corneal implants: effects of sterically bulky vs. non-bulky carbodiimides as crosslinkers.

    abstract::We have previously shown that recombinant human collagen can be crosslinked with N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide (EDC) to fabricate transparent hydrogels possessing the shape and dimensions of the human cornea. These corneal implants have been tested in a Phase I human clinical study. Although these hyd...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2013.04.014

    authors: Ahn JI,Kuffova L,Merrett K,Mitra D,Forrester JV,Li F,Griffith M

    更新日期:2013-08-01 00:00:00

  • Chemical surface alteration of biodegradable magnesium exposed to corrosion media.

    abstract::The understanding of corrosion processes of metal implants in the human body is a key problem in modern biomaterial science. Because of the complicated and adjustable in vivo environment, in vitro experiments require the analysis of various physiological corrosion media to elucidate the underlying mechanism of "biolog...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2011.03.004

    authors: Willumeit R,Fischer J,Feyerabend F,Hort N,Bismayer U,Heidrich S,Mihailova B

    更新日期:2011-06-01 00:00:00

  • Degradation and hemostatic properties of polyphosphate coacervates.

    abstract:UNLABELLED:Sodium polyphosphate is a linear polymer formed from phosphate units linked together by sharing oxygen atoms. Addition of calcium to a solution of sodium polyphosphate results in phase separation and formation of a polyphosphate coacervate best described as a polymeric rich viscoelastic material. Polyphospha...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2016.06.002

    authors: Momeni A,Filiaggi MJ

    更新日期:2016-09-01 00:00:00