In vitro evaluation of Pt-coated electrospun nanofibers for endovascular coil embolization.

Abstract:

:Recently, endovascular coil embolization has been introduced to treat intracranial aneurysms because it has lower morbidity and mortality than surgical clipping. The endovascular coils prevent the extravasation of blood by decreasing the permeability of an aneurysm flow governed by Darcy's law. Here, we developed and explored Pt-coated micro-ropes for potential use as endovascular coils. Electrospinning with subsequent electroplating were employed to fabricate Pt-coated nanofibers, which were tightly twisted to form micro-ropes. The compatibility of Pt micro-ropes with commercial delivery catheters was verified and their performance was experimentally explored in an in vitro experimental model. The developed Pt-coated micro-ropes demonstrated feasibility as efficient and low-cost endovascular coils. STATEMENT OF SIGNIFICANCE: The use of Platinum (Pt)-coated polymer nanofibers to prevent blood extravasation has been demonstrated. These Pt nanofibers were installed within a microfluidic channel, and the resulting reduced permeability was evaluated using a fluid similar to blood. Based on the obtained results, these newly developed nanofibers are expected to decrease the operation cost for aneurysmal subarachnoid hemorrhage (SAH), owing their reduced size and low material cost. Overall, the use of this new material should reduce the operational risk associated with the multiple steps required to place the Pt coils at the SAH site. The compatibility of Pt micro-ropes with commercial delivery catheters was verified and their performance was experimentally explored in an in vitro experimental model. The developed Pt-coated micro-ropes demonstrated feasibility as efficient and low-cost endovascular coils.

journal_name

Acta Biomater

journal_title

Acta biomaterialia

authors

Kim MW,An S,Seok H,Jung H,Park DH,Yarin AL,Yoon SS

doi

10.1016/j.actbio.2019.10.015

subject

Has Abstract

pub_date

2020-01-01 00:00:00

pages

285-292

eissn

1742-7061

issn

1878-7568

pii

S1742-7061(19)30691-9

journal_volume

101

pub_type

杂志文章
  • Development of glass-ceramic scaffolds for bone tissue engineering: characterisation, proliferation of human osteoblasts and nodule formation.

    abstract::Glass-ceramic macroporous scaffolds for tissue engineering have been developed using a polyurethane sponge template and bioactive glass powders. The starting glass (CEL2) belongs to the system SiO(2)-P(2)O(5)-CaO-MgO-Na(2)O-K(2)O and has been synthesised by a conventional melting-quenching route. A slurry of CEL2 powd...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2006.07.012

    authors: Vitale-Brovarone C,Verné E,Robiglio L,Appendino P,Bassi F,Martinasso G,Muzio G,Canuto R

    更新日期:2007-03-01 00:00:00

  • Decoding rejuvenating effects of mechanical loading on skeletal aging using in vivo μCT imaging and deep learning.

    abstract::Throughout the process of aging, dynamic changes of bone material, micro- and macro-architecture result in a loss of strength and therefore in an increased likelihood of fragility fractures. To date, precise contributions of age-related changes in bone (re)modeling and (de)mineralization dynamics to this fragility inc...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2020.02.007

    authors: Asgharzadeh P,Röhrle O,Willie BM,Birkhold AI

    更新日期:2020-04-01 00:00:00

  • Unraveling the role of β1 integrin isoforms in cRGD-mediated uptake of nanoparticles bearing hydrophilized alkyne moieties in epithelial and endothelial cells.

    abstract::The uptake and trafficking of NPs is impacted by several attributes such as size, shape, surface charge and importantly by surface ligands that can interact with the cell plasma membrane. We envision that NPs which can be readily modified in aqueous environments will be key to engineering patient-specific nanotherapeu...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2020.08.038

    authors: Zhang W,Teske N,Samadi M,Sarem M,Shastri VP

    更新日期:2020-10-15 00:00:00

  • A tailored positively-charged hydrophobic surface reduces the risk of implant associated infections.

    abstract::Implant-associated infections is one of the most challenging post-operative complications in bone-related implantations. To tackle this clinical issue, we developed a low-cost and durable surface coating for medical grade titanium implants that uses positively charged silane molecules. The in vitro antimicrobial tests...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2020.07.040

    authors: Shen J,Gao P,Han S,Kao RYT,Wu S,Liu X,Qian S,Chu PK,Cheung KMC,Yeung KWK

    更新日期:2020-09-15 00:00:00

  • Fabrication and characterization of bioactive and antibacterial composites for dental applications.

    abstract::There is an increasing clinical need to design novel dental materials that combine regenerative and antibacterial properties. In this work the characterization of a recently developed sol-gel-derived bioactive glass ceramic containing silver ions (Ag-BG) is presented. The microstructural characteristics, ion release p...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2014.04.030

    authors: Chatzistavrou X,Fenno JC,Faulk D,Badylak S,Kasuga T,Boccaccini AR,Papagerakis P

    更新日期:2014-08-01 00:00:00

  • Polymer-conjugated albumin and fibrinogen composite hydrogels as cell scaffolds designed for affinity-based drug delivery.

    abstract::Serum albumin was conjugated to poly-(ethylene glycol) (PEG) and cross-linked to form mono-PEGylated albumin hydrogels. These hydrogels were used as a basis for drug carrying tissue engineering scaffold materials, based on the natural affinity of various drugs and compounds for the tethered albumin in the polymer netw...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2010.07.017

    authors: Oss-Ronen L,Seliktar D

    更新日期:2011-01-01 00:00:00

  • Cytocompatible cross-linking of electrospun zein fibers for the development of water-stable tissue engineering scaffolds.

    abstract::This paper reports a new method of cross-linking electrospun zein fibers using citric acid as a non-toxic cross-linker to enhance the water stability and cytocompatibility of zein fibers for tissue engineering and other medical applications. The electrospun structure has many advantages over other types of structures ...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2010.04.024

    authors: Jiang Q,Reddy N,Yang Y

    更新日期:2010-10-01 00:00:00

  • The effect of pore geometry on the in vitro biological behavior of human periosteum-derived cells seeded on selective laser-melted Ti6Al4V bone scaffolds.

    abstract::The specific aim of this study was to gain insight into the influence of scaffold pore size, pore shape and permeability on the in vitro proliferation and differentiation of three-dimensional (3-D) human periosteum-derived cell (hPDC) cultures. Selective laser melting (SLM) was used to produce six distinct designed ge...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2012.04.001

    authors: Van Bael S,Chai YC,Truscello S,Moesen M,Kerckhofs G,Van Oosterwyck H,Kruth JP,Schrooten J

    更新日期:2012-07-01 00:00:00

  • Biomimetic L-aspartic acid-derived functional poly(ester amide)s for vascular tissue engineering.

    abstract::Functionalization of polymeric biomaterials permits the conjugation of cell signaling molecules capable of directing cell function. In this study, l-phenylalanine and l-aspartic acid were used to synthesize poly(ester amide)s (PEAs) with pendant carboxylic acid groups through an interfacial polycondensation approach. ...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2014.04.014

    authors: Knight DK,Gillies ER,Mequanint K

    更新日期:2014-08-01 00:00:00

  • Interfacial optimization of fiber-reinforced hydrogel composites for soft fibrous tissue applications.

    abstract::Meniscal tears are the most common orthopedic injuries to the human body, yet the current treatment of choice is a partial meniscectomy, which is known to lead to joint degeneration and osteoarthritis. As a result, there is a significant clinical need to develop materials capable of restoring function to the meniscus ...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2014.05.004

    authors: Holloway JL,Lowman AM,VanLandingham MR,Palmese GR

    更新日期:2014-08-01 00:00:00

  • Immobilization of a phosphonated analog of matrix phosphoproteins within cross-linked collagen as a templating mechanism for biomimetic mineralization.

    abstract::Immobilization of phosphoproteins on a collagen matrix is important for the induction of intrafibrillar apatite mineralization. Unlike phosphate esters, polyphosphonic acid has no reactive sites for covalent binding to collagen amine groups. Binding of poly(vinyl phosphonic acid) (PVPA), a biomimetic templating analog...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2010.07.036

    authors: Gu LS,Kim YK,Liu Y,Takahashi K,Arun S,Wimmer CE,Osorio R,Ling JQ,Looney SW,Pashley DH,Tay FR

    更新日期:2011-01-01 00:00:00

  • Polymer chain flexibility-induced differences in fetuin A adsorption and its implications on cell attachment and proliferation.

    abstract:UNLABELLED:Tissue cells are known to respond to the stiffness of the polymer substrate on which they are grown. It has been suggested that material stiffness influences the composition of the protein layer that adsorbs to the material surface, which affects subsequent cell behavior. Previously, the stiffness of a bioma...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2015.11.039

    authors: Vyner MC,Amsden BG

    更新日期:2016-02-01 00:00:00

  • Staphylococcus epidermidis originating from titanium implants infects surrounding tissue and immune cells.

    abstract::Infection is a major cause of failure of inserted or implanted biomedical devices (biomaterials). During surgery, bacteria may adhere to the implant, initiating biofilm formation. Bacteria are also observed in and recultured from the tissue surrounding implants, and may even reside inside host cells. Whether these bac...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2014.08.012

    authors: Riool M,de Boer L,Jaspers V,van der Loos CM,van Wamel WJB,Wu G,Kwakman PHS,Zaat SAJ

    更新日期:2014-12-01 00:00:00

  • Characterization of water in hydrated Bombyx mori silk fibroin fiber and films by 2H NMR relaxation and 13C solid state NMR.

    abstract::The mechanical properties of Bombyx mori silk fibroin (SF), such as elasticity and tensile strength, change remarkably upon hydration. However, the microscopic interaction with water is not currently well understood on a molecular level. In this work, the dynamics of water molecules interacting with SF was studied by ...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2016.12.052

    authors: Asakura T,Isobe K,Kametani S,Ukpebor OT,Silverstein MC,Boutis GS

    更新日期:2017-03-01 00:00:00

  • Predictive biomechanical analysis of ascending aortic aneurysm rupture potential.

    abstract::Aortic aneurysm is a leading cause of death in adults, often taking lives without any premonitory signs or symptoms. Adverse clinical outcomes of aortic aneurysm are preventable by elective surgical repair; however, identifying at-risk individuals is difficult. The objective of this study was to perform a predictive b...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2013.07.044

    authors: Martin C,Sun W,Pham T,Elefteriades J

    更新日期:2013-12-01 00:00:00

  • Corrosion fatigue of biomedical metallic alloys: mechanisms and mitigation.

    abstract::Cyclic stresses are often related to the premature mechanical failure of metallic biomaterials. The complex interaction between fatigue and corrosion in the physiological environment has been subject of many investigations. In this context, microstructure, heat treatments, plastic deformation, surface finishing and co...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章,评审

    doi:10.1016/j.actbio.2011.09.012

    authors: Antunes RA,de Oliveira MC

    更新日期:2012-03-01 00:00:00

  • Preparation of designed poly(D,L-lactide)/nanosized hydroxyapatite composite structures by stereolithography.

    abstract::The preparation of scaffolds to facilitate the replacement of damaged tissues and organs by means of tissue engineering has been much investigated. The key properties of the biomaterials used to prepare such scaffolds include biodegradability, biocompatibility and a well-defined three-dimensional 3-Dpore network struc...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2012.12.004

    authors: Ronca A,Ambrosio L,Grijpma DW

    更新日期:2013-04-01 00:00:00

  • A poly(l-glutamic acid)-combretastatin A4 conjugate for solid tumor therapy: Markedly improved therapeutic efficiency through its low tissue penetration in solid tumor.

    abstract::Combretastatin A4 (CA4) is a leading agent in vascular disrupting strategies for tumor therapy. Although many small-molecule prodrugs of CA4 have been developed to improve its solubility, the overall therapeutic efficiency is moderate. A key reason for this is the reversible effect that CA4 has on tubulin as well as i...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2017.02.001

    authors: Liu T,Zhang D,Song W,Tang Z,Zhu J,Ma Z,Wang X,Chen X,Tong T

    更新日期:2017-04-15 00:00:00

  • Strain specificity in antimicrobial activity of silver and copper nanoparticles.

    abstract::The antimicrobial properties of silver and copper nanoparticles were investigated using Escherichia coli (four strains), Bacillus subtilis and Staphylococcus aureus (three strains). The average sizes of the silver and copper nanoparticles were 3 nm and 9 nm, respectively, as determined through transmission electron mi...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2007.11.006

    authors: Ruparelia JP,Chatterjee AK,Duttagupta SP,Mukherji S

    更新日期:2008-05-01 00:00:00

  • An integrated approach for probing the structure and mechanical properties of diatoms: Toward engineered nanotemplates.

    abstract::The wide variety of diatom frustule shapes and intricate architectures provide viable prototypes to guide the design and fabrication of nanodevices and nanostructured materials for applications ranging from sensors to nanotemplates. In this study, a combined experimental-simulation method was developed to probe the po...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2015.07.028

    authors: Moreno MD,Ma K,Schoenung J,Dávila LP

    更新日期:2015-10-01 00:00:00

  • Effect of nanostructure on osteoinduction of porous biphasic calcium phosphate ceramics.

    abstract::In order to evaluate the effect of the nanostructure of calcium phosphate ceramics on osteoinductive potential, porous biphasic calcium phosphate (BCP) ceramics with a nano- or submicron structure were prepared via microwave sintering and compared to conventional BCP ceramics. The selective protein adsorption of bovin...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章,收录出版

    doi:10.1016/j.actbio.2012.06.021

    authors: Li B,Liao X,Zheng L,Zhu X,Wang Z,Fan H,Zhang X

    更新日期:2012-10-01 00:00:00

  • Antibacterial properties of metal and metalloid ions in chronic periodontitis and peri-implantitis therapy.

    abstract::Periodontal diseases like periodontitis and peri-implantitis have been linked with Gram-negative anaerobes. The incorporation of various chemotherapeutic agents, including metal ions, into several materials and devices has been extensively studied against periodontal bacteria, and materials doped with metal ions have ...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章,评审

    doi:10.1016/j.actbio.2014.03.028

    authors: Goudouri OM,Kontonasaki E,Lohbauer U,Boccaccini AR

    更新日期:2014-08-01 00:00:00

  • Deformation-induced ω phase in modified Ti-29Nb-13Ta-4.6Zr alloy by Cr addition.

    abstract::For spinal-fixation applications, implants should have a high Young's modulus to reduce springback during operations, though a low Young's modulus is required to prevent stress shielding for patients after surgeries. In the present study, Ti-29Nb-13Ta-4.6Zr alloy (TNTZ) with a low Young's modulus was modified by addin...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2013.04.032

    authors: Li Q,Niinomi M,Hieda J,Nakai M,Cho K

    更新日期:2013-08-01 00:00:00

  • Constitutive modeling of the stress-strain behavior of F-actin filament networks.

    abstract::The central role of the cytoskeleton in both healthy and diseased cellular functions makes it a compelling subject for detailed three-dimensional (3D) micromechanical modeling. Microstructural features of the cytoskeleton govern the cell's mechanical behavior in many of the regulating cellular functions including cell...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2007.12.007

    authors: Palmer JS,Boyce MC

    更新日期:2008-05-01 00:00:00

  • Myoblast maturity on aligned microfiber bundles at the onset of strain application impacts myogenic outcomes.

    abstract::Engineered skeletal muscle grafts may be employed in various applications including the treatment of volumetric muscle loss (VML) and pharmacological drug screening. To recapitulate the well-defined structure of native muscle, tensile strains have been applied to the grafts. In this study, we cultured C2C12 murine myo...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2019.06.024

    authors: Somers SM,Zhang NY,Morrissette-McAlmon JBF,Tran K,Mao HQ,Grayson WL

    更新日期:2019-08-01 00:00:00

  • Characterization of polyethylene wear particle: The impact of methodology.

    abstract::Due to the prevalence of problems caused by wear particles, the reduced durability of total joint replacements is well documented. The characterization of wear debris enables the size and morphology of these wear particles to be measured and provides an assessment of the biological response in vivo. However, the impac...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2013.07.039

    authors: Schröder C,Reinders J,Zietz C,Utzschneider S,Bader R,Kretzer JP

    更新日期:2013-12-01 00:00:00

  • Injectable and biodegradable thermosensitive hydrogels loaded with PHBHHx nanoparticles for the sustained and controlled release of insulin.

    abstract::Biodegradable PHBHHx (poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)) nanoparticles containing insulin phospholipid complex were loaded in chitosan-based thermosensitive hydrogels for long-term sustained and controlled delivery of insulin. The injectable hydrogels, prepared by adding β-glycerophosphate disodium salt (G...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2012.09.034

    authors: Peng Q,Sun X,Gong T,Wu CY,Zhang T,Tan J,Zhang ZR

    更新日期:2013-02-01 00:00:00

  • Design of imperfectly amphipathic α-helical antimicrobial peptides with enhanced cell selectivity.

    abstract::Antimicrobial peptides (AMPs), which are produced by multicellular organisms as a defense mechanism against competing pathogenic microbes, appear to be excellent candidates for the development of novel antimicrobial agents. Amphipathicity is traditionally believed to be crucial to the de novo design or systematic opti...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2013.08.043

    authors: Zhu X,Dong N,Wang Z,Ma Z,Zhang L,Ma Q,Shan A

    更新日期:2014-01-01 00:00:00

  • Interaction force measurements for the design of tissue adhesives.

    abstract::Synthesis of tissue adhesives had been carried out in various laboratories in the past decades but the development is currently stalled. One of the key reasons, it is believed, is that researchers have not fully understood and resolved the role of the functional groups that are responsible for good adhesion to biologi...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2008.08.001

    authors: Lim KP,Tan LP

    更新日期:2009-01-01 00:00:00

  • Comparison of PEG chain length and density on amphiphilic macromolecular nanocarriers: self-assembled and unimolecular micelles.

    abstract::Two classes of amphiphilic macromolecules were evaluated for drug delivery applications: those that exist as unimolecular micelles and those that self-assemble in aqueous solution to form micelles. This study compares the poly(ethylene glycol) (PEG) chain length and density that constitute the corona of both classes. ...

    journal_title:Acta biomaterialia

    pub_type: 杂志文章

    doi:10.1016/j.actbio.2008.10.019

    authors: Wang J,del Rosario LS,Demirdirek B,Bae A,Uhrich KE

    更新日期:2009-03-01 00:00:00