Abstract：
OBJECTIVES:The aim of this study was to compare four finishing/polishing systems (F/P) on surface roughness and gloss of different resin composites. METHODS:A total of 40 disc samples (15 mm × 3 mm) were prepared from a nanofill - Filtek Supreme Plus (FS) and a micro-hybrid resin composite - Esthet-X (EX). Following 24h storage in 37°C water, the top surfaces of each sample were roughened using 120-grit sandpaper. Baseline measurements of surface roughness (Ra, μm) and gloss were recorded. Each composite group was divided into four F/P disk groups: Astropol[AP], Enhance/PoGo[EP], Sof-Lex[SL], and an experimental disk system, EXL-695[EXL] (n=5). The same operator finished/polished all samples. One sample from each group was evaluated under SEM. Another blinded-operator conducted postoperative measurements. Results were analysed by two-way ANOVA, two interactive MANOVA and Tukey's t-test (p<0.05). RESULTS:In surface roughness, the baseline of two composites differed significantly from each other whereas postoperatively there was no significance. The Sof-Lex F/P system provided the smoothest surface although there were no statistical significance differences between F/P systems (p>0.01). In gloss, FS composite with the EXL-695 system provided a significantly higher gloss (p<0.01). EX treated by Soflex revealed the least gloss (p<0.05). SEM images revealed comparable results for F/P systems but EX surfaces included more air pockets. CONCLUSIONS:Four different finishing/polishing systems provided comparable surface smoothness for both composites, whereas EXL with FS provided significantly higher gloss. SEM evaluations revealed that the EX surface contained more air pockets but F/P systems were compatible.
journal_name
J Dentjournal_title
Journal of dentistryauthors
Antonson SA,Yazici AR,Kilinc E,Antonson DE,Hardigan PCdoi
10.1016/j.jdent.2011.01.006subject
Has Abstractpub_date
2011-07-01 00:00:00pages
e9-17eissn
0300-5712issn
1879-176Xpii
S0300-5712(11)00020-0journal_volume
39 Suppl 1pub_type
杂志文章abstract：OBJECTIVES:The aim of this study was to evaluate the risk factors associated with noncarious cervical lesions (NCCLs), cervical dentin hypersensitivity (CDH), and gingival recession (GR), besides the relationship among these conditions in a specific Brazilian sample population. METHODS:185 patients who attended the "A...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2018.06.017
更新日期：2018-09-01 00:00:00
abstract：OBJECTIVES:Dentifrices containing zinc reduce gingival inflammation and bleeding better than control dentifrices (no zinc). How zinc might work is not understood. We have shown that lysine decarboxylase (LdcE), an enzyme from Eikenella corrodens, converts lysine to cadaverine in dental biofilms. The lack of lysine impa...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2020.103533
更新日期：2020-11-12 00:00:00
abstract：OBJECTIVE:This study compared the antibacterial activities of two dentin bonding systems (ABF, Kuraray and Reactmer Bond, Shofu) by a conventional agar well technique and a newly designed in vitro test using tooth model. METHODS:In the agar well technique, the test materials were filled in the wells of Muller Hinton a...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/s0300-5712(03)00006-x
更新日期：2003-02-01 00:00:00
abstract：OBJECTIVES:Three strength tests (compressive, three point flexure and biaxial) were performed on three glass ionomer (GI) restoratives to assess the most appropriate methodology in terms of validity and reliability. The influence of mixing induced variability on the data sets generated were eliminated by using encapsul...
journal_title：Journal of dentistry
pub_type： 杂志文章,随机对照试验
doi：10.1016/j.jdent.2011.12.002
更新日期：2012-03-01 00:00:00
abstract：OBJECTIVE:This randomised, examiner-blind parallel group study was designed to evaluate the safety and efficacy of a rechargeable oscillating/pulsating toothbrush (Oral-B ProfessionalCare 7000, Oral-B Laboratories; PC 7000) and a battery-operated toothbrush (Crest SpinBrush Pro, Procter & Gamble Company; SBP) in the re...
journal_title：Journal of dentistry
pub_type： 临床试验,杂志文章,随机对照试验
doi：
更新日期：2005-06-01 00:00:00
abstract：OBJECTIVE:To study the combined effect of simulated occlusal loading and plaque-derived biofilm on the interfacial integrity of dental composite restorations, and to explore whether the effects are modulated by the incorporation of sucrose. METHODS:MOD-class-II restorations were prepared in third molars. Half of the s...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2017.08.009
更新日期：2017-11-01 00:00:00
abstract：OBJECTIVES:The aim of this study was to evaluate the effect of a zinc-based particle with ionic liquid as filler for an experimental adhesive resin. METHODS:The ionic liquid 1-n-butyl-3-methylimidazolium chloride (BMI.Cl) and zinc chloride (ZnCl2) were used to synthesize 1-n-butyl-3-methylimidazolium trichlorozincate ...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2020.103477
更新日期：2020-11-01 00:00:00
abstract：OBJECTIVES:The in-vitro dissolution of bioactive glass-based toothpastes and their capacity to form apatite-like phases in buffer solutions have been investigated. MATERIALS AND METHODS:The commercial toothpaste samples were tested on immersion in artificial saliva, Earle's salt solution and Tris buffer for duration f...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2017.10.015
更新日期：2018-01-01 00:00:00
abstract：OBJECTIVE:To evaluate the content of inorganic particles and the flexural strength of new condensable composites for posterior teeth in comparison to hybrid conventional composites. METHOD:The determination of the content of inorganic particles was performed by mass weighing of a polymerized composite before and after...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/s0300-5712(03)00049-6
更新日期：2003-07-01 00:00:00
abstract：OBJECTIVE:To investigate the effect of three manual toothbrushes on dental plaque and gingival inflammation. METHODS:The elmex Sensitive Extra Soft (ESES), elmex Sensitive Soft (ESS) and an ADA standard toothbrush (ADAS) were evaluated in a randomized clinical trial. Subjects brushed twice daily in their usual manner....
journal_title：Journal of dentistry
pub_type： 杂志文章,随机对照试验
doi：10.1016/j.jdent.2007.04.005
更新日期：2007-07-01 00:00:00
abstract：AIM:The main goal of this prospective clinical study was to evaluate the outcome of inlay-retained fixed dental prostheses (FDPs) made from heat-pressed lithium-disilicate glass-ceramic. METHODS:Forty-five FDPs were placed in 42 patients (21 women, mean age 36.1 years and 21 men, mean age 42.0 years). The FDPs replace...
journal_title：Journal of dentistry
pub_type： 临床试验,杂志文章
doi：10.1016/j.jdent.2010.07.012
更新日期：2010-11-01 00:00:00
abstract：OBJECTIVES:To investigate the influence of pre-heating of high-viscosity bulk-fill composite materials on their degree of conversion and shrinkage force formation. METHODS:Four bulk-fill composite materials (Tetric EvoCeram Bulk Fill-TECBF, x-tra fil-XF, QuixFil-QF, SonicFill-SF) and one conventional nano-hybrid resin...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2015.07.014
更新日期：2015-11-01 00:00:00
abstract：OBJECTIVES:Midterm-evaluation of a 5-year prospective clinical splitmouth-investigation on survival rate and long-term behavior of all-ceramic partial coverage restorations (PCRs) on molars. Pressed ceramic and CAD/CAM fabricated PCRs were compared. METHODS:80 vital molars of 25 patients were restored with all-ceramic...
journal_title：Journal of dentistry
pub_type： 临床试验,杂志文章
doi：10.1016/j.jdent.2009.04.006
更新日期：2009-08-01 00:00:00
abstract：BACKGROUND:There is no consensus on whether incisal coverage is a risk or a protective factor in preparations for ceramic veneers. OBJECTIVE:The aim of this systematic review and meta-analysis was to evaluate the survival rates of preparation designs for ceramic veneers with and without incisal coverage. METHODS:Prim...
journal_title：Journal of dentistry
pub_type： 杂志文章,meta分析,评审
doi：10.1016/j.jdent.2016.06.004
更新日期：2016-09-01 00:00:00
abstract：OBJECTIVES:This study investigated the effects of the surface conditioning of nano-zirconia fillers with 10-methacryloyloxydecyl dihydrogen phosphate (MDP) and dipentaerythritol penta-acrylate phosphate (PENTA) on the degree of conversion and mechanical properties of Bis-GMA- and UDMA-based resin composites containing ...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2020.103306
更新日期：2020-03-01 00:00:00
abstract：:Clinical experience suggests that severe alveolar bone resorption can limit the success of complete denture wearing. The loss of bone mineral with age occurs throughout the skeleton, which contributes to the high incidence of bone fractures later in life. Women are more commonly affected by some of these fractures. Th...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/0300-5712(89)90141-3
更新日期：1989-04-01 00:00:00
abstract：OBJECTIVE:This study evaluated the inhibitory effect of proanthocyanidin (PA), a natural collagen cross-linker, on soluble and matrix-bound proteases, which are responsible for progressive degradation of exposed collagen fibrils within the hybrid layer and resin-dentine bond failure over time. METHODS:The inhibitory e...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2013.06.002
更新日期：2013-09-01 00:00:00
abstract：INTRODUCTION:We assessed time trends in root caries experience, i.e. the sum of filled and carious root surfaces (FRS, CRS), and evaluated risk indicators of FRS/CRS in Germany. METHODS:FRS and CRS from repeated waves (1997, 2005, 2014) of the nationally-representative German Oral Health Studies were analyzed in 35-44...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2018.08.013
更新日期：2018-11-01 00:00:00
abstract：OBJECTIVES:To assess the cuspal deflection and cervical microleakage of standardised Class II cavities incrementally filled with a dimethacrylate RBC or bulk-fill flowable RBC bases. METHODS:Twenty-four sound upper premolar teeth with Class II cavities were allocated to three groups (n=8). Restoration of the teeth inv...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2012.02.015
更新日期：2012-06-01 00:00:00
abstract：BACKGROUND:Untreated dental caries in children remains a public health challenge in poor communities. OBJECTIVES:This prospective controlled clinical trial investigated the effectiveness of a new anti-caries agent, Nano Silver Fluoride (NSF), applied once a year to arrest caries in children. METHODS:One hundred thirt...
journal_title：Journal of dentistry
pub_type： 杂志文章,随机对照试验
doi：10.1016/j.jdent.2014.05.017
更新日期：2014-08-01 00:00:00
abstract：OBJECTIVES:To investigate, in a sample of probable sleep bruxers with and without temporomandibular disorder (TMD) pain, the presence and relationships between clinical jaw-muscle symptoms, and test their associations with jaw-muscle electromyographic (EMG) activity during sleep. METHODS:Pain, unpleasantness, tirednes...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2019.05.016
更新日期：2019-06-01 00:00:00
abstract：:The purpose was to present a descriptive report of the clinical performance of adhesive bridges fitted in a university department of restorative dentistry. The case records of 400 consecutive adhesive bridges fitted between November 1984 and June 1989 in the School of Clinical Dentistry, Queen's University, Belfast we...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/0300-5712(91)90122-f
更新日期：1991-08-01 00:00:00
abstract：OBJECTIVES:Tooth shade is crucial to patient satisfaction in aesthetic dentistry. Two-dimensional (2D) clinical photographs have been widely used to record patients' tooth shade for creation of beautiful smile. However, in the digital workflow, 3D virtual teeth models in open file format contain only mesh information w...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2018.09.009
更新日期：2018-12-01 00:00:00
abstract：OBJECTIVES:Recently, a novel device to generate dental plaque in situ on a removable human enamel surface was described. The device permitted the recovery of plaque intact and undisturbed on its enamel substrate. The aim of this investigation was to determine the utility and robustness of this model for analysis of the...
journal_title：Journal of dentistry
pub_type： 临床试验,杂志文章,随机对照试验
doi：10.1016/s0300-5712(01)00033-1
更新日期：2001-08-01 00:00:00
abstract：OBJECTIVES:To determine the influence of two enamel conditioning techniques on buccal and lingual tooth surfaces at two different times on debonding strength and tooth damage. METHODS:The study included 50 premolars. Buccal and lingual surfaces of 10 teeth were scanned using SEM before (N=4) and after enamel condition...
journal_title：Journal of dentistry
pub_type： 临床试验,杂志文章,随机对照试验
doi：10.1016/j.jdent.2004.08.005
更新日期：2005-02-01 00:00:00
abstract：OBJECTIVE:The aim of this study was to characterize the surface of Y-TZP after abrasion with various airborne particles. METHODS:The Y-TZP blanks were cut into 44 discs and sintered according to the manufacturer's instructions. The specimens were treated as follows: (a) control specimens, (b) abraded with 50μm alumina...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2012.05.003
更新日期：2012-09-01 00:00:00
abstract：OBJECTIVES:To elucidate the impact of surface properties and the release of fluoride from different glass ionomer cements on biofilm formation. METHODS:Standardized specimens manufactured from various classes of glass ionomer cements (GICs), a resin-based composite (RBC), and human enamel were subjected to surface ana...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2017.02.005
更新日期：2017-05-01 00:00:00
abstract：OBJECTIVES:To assess the accuracy of a novel, non-invasive method for determining the axis of rotation of articulated dental study casts. METHOD:A 3D structured light scanner was constructed using a projector and two CMOS cameras. Dental stone casts were arbitrarily mounted on an average value articulator. With the te...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2013.11.019
更新日期：2014-02-01 00:00:00
abstract：OBJECTIVES:This in vitro study examined the resistance to displacement offered by guide planes and the displacement mechanics of a bilateral bounded saddle cast cobalt chrome alloy removable partial denture framework under conditions simulating an average initial fit. METHODS:A specially designed model mouth jig fitte...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/s0300-5712(01)00016-1
更新日期：2001-05-01 00:00:00
abstract：OBJECTIVES:The failure of the bond between acrylic resin denture base material and resin teeth remains a significant problem. This study evaluated the tensile bond strength of specimens produced by commonly employed tooth preparation and processing methods as used in dental laboratories. METHODS:Twenty-two experimenta...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/s0300-5712(98)00034-7
更新日期：1999-02-01 00:00:00
