Abstract:
OBJECTIVES:The failure of the bond between acrylic resin denture base material and resin teeth remains a significant problem. This study evaluated the tensile bond strength of specimens produced by commonly employed tooth preparation and processing methods as used in dental laboratories. METHODS:Twenty-two experimental groups, each consisting of 36 specimens, were investigated by subjecting the tooth-resin bond to tensile loading. The groups were allocated to one of five experimental sets to investigate: (a) effect of resin dough time, (b) effect of tooth surface condition, (c) effect of processing variables, (d) effect of monomer cementing, and (e) effect of acrylic resin cement. The results were analysed statistically using a one factor ANOVA and a Student t test. RESULTS:A significantly stronger bond was obtained when the resin was packed late in the dough stage, and a superior bond, in all cases, when high-impact resin was used. Tooth surface modification by grinding or grooving made no significant difference when compared with unmodified surfaces. Wax-contaminated surfaces produced highly significant weaker bonds. Time of introduction and duration of water-bath processing had no significant effect on bond strength. Monomer cementing of the tooth surface, especially with high-impact monomer. significantly improved the bond strength. The application of resin cements was found to produce the most significant increase in denture tooth bond strength. CONCLUSIONS:The important steps in obtaining a consistently high value denture tooth bond are thorough dewaxing of the tooth surface followed by the application of a suitable resin cement.
journal_name
J Dentjournal_title
Journal of dentistryauthors
Cunningham JL,Benington ICdoi
10.1016/s0300-5712(98)00034-7keywords:
subject
Has Abstractpub_date
1999-02-01 00:00:00pages
129-35issue
2eissn
0300-5712issn
1879-176Xpii
S0300-5712(98)00034-7journal_volume
27pub_type
杂志文章abstract:OBJECTIVES:This prospective clinical study compared the performance of implant-retained (study group) and tooth-retained (control) zirconia based fixed dental prostheses (FDPs) with at least 4 units. The null-hypothesis stated that complication rates in both groups are equally distributed. METHODS:The study included p...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2014.10.011
更新日期:2015-01-01 00:00:00
abstract:OBJECTIVES:The aim of this study was to compare four finishing/polishing systems (F/P) on surface roughness and gloss of different resin composites. METHODS:A total of 40 disc samples (15 mm × 3 mm) were prepared from a nanofill - Filtek Supreme Plus (FS) and a micro-hybrid resin composite - Esthet-X (EX). Following 2...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2011.01.006
更新日期:2011-07-01 00:00:00
abstract:OBJECTIVE:To compare the effect of QMix (Dentsply Sirona), 7% maleic acid (MA), and 17% ethylenediaminetetraacetic acid (EDTA) on the microhardness, flexural strength and microstructure of mineral trioxide aggregate (MTA; ProRoot MTA, Dentsply Sirona). METHODS:Forty MTA specimens were divided into four groups: [I] QMi...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2017.08.018
更新日期:2017-11-01 00:00:00
abstract:OBJECTIVE:To determine the relationship between leakage and microtensile bond strength in the same specimen of direct Class II composite restorations performed with two polymerization techniques. METHODS:Class II slot preparations were made in 40 non-carious human third molars and restored using Single Bond and P-60 (...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2005.01.001
更新日期:2005-08-01 00:00:00
abstract:OBJECTIVES:This study evaluated the immediate and 6-month resin-dentin micro-bond strength (microTBS) of one-step self-etch systems (Adper Prompt L-Pop [AD] 3M ESPE; Xeno III [XE] Dentsply De Trey; iBond [iB] Heraeus Kulzer) under different application modes. MATERIALS AND METHODS:Dentin oclusal surfaces were exposed ...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2008.01.018
更新日期:2008-05-01 00:00:00
abstract:OBJECTIVES:The effectiveness of fissure sealing in preventing dental caries in a subject-specific fashion was studied in order to forge a link between the controlled trials and knowledge creation in clinical practice. METHODS:The subjects were divided retrospectively into three categories according to the sealant trea...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2006.10.009
更新日期:2007-04-01 00:00:00
abstract:OBJECTIVES:The aim of the present study is to investigate variables of the past caries experience as indicators of future caries in a Chinese child population. METHODS:Caries was recorded at baseline and 2 years later in 433, 6-7-year-old Chinese children. Correlation coefficients between variables of the past caries ...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2005.12.010
更新日期:2006-10-01 00:00:00
abstract:OBJECTIVES:To investigate, in a sample of probable sleep bruxers with and without temporomandibular disorder (TMD) pain, the presence and relationships between clinical jaw-muscle symptoms, and test their associations with jaw-muscle electromyographic (EMG) activity during sleep. METHODS:Pain, unpleasantness, tirednes...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2019.05.016
更新日期:2019-06-01 00:00:00
abstract:OBJECTIVES:Teeth in a patient's mouth in a dental office, or in the natural environment, represent very complex stimuli for the human color vision system. Predicting their perceived color is a daunting task at best. Colorimetry is designed mainly for the evaluation of uniform, flat, opaque, materials of fairly large si...
journal_title:Journal of dentistry
pub_type: 杂志文章,评审
doi:10.1016/j.jdent.2010.05.008
更新日期:2010-01-01 00:00:00
abstract:OBJECTIVES:To measure the shear bond strengths of various luting cements to a sandblasted zirconia ceramic and to determine the surface energy parameters of the luting cements. METHODS:Two conventional glass ionomer cements, two resin-modified glass ionomer cements, two compomer cements, and two adhesive resin cements...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2011.08.012
更新日期:2011-11-01 00:00:00
abstract::The Annual Conference of the British Association of Teachers of Conservative Dentistry (BATCD) was held in Sheffield on 16 and 17 September 1993. The main programme addressed educational issues in three areas: the undergraduate/vocational-trainee interface, the teaching of implants in the undergraduate curriculum, and...
journal_title:Journal of dentistry
pub_type:
doi:10.1016/0300-5712(94)90069-8
更新日期:1994-10-01 00:00:00
abstract:OBJECTIVES:The aim of this study was to compare the fracture strength of three techniques used to re-attach tooth fragments in sound and endodontically treated fractured teeth with or without fiber post placement. MATERIAL AND METHODS:Ninety human lower incisors were randomly divided into three groups of 30 teeth each...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2008.01.001
更新日期:2008-04-01 00:00:00
abstract:OBJECTIVES:This clinical study evaluated the long-term outcome and survival rate of all-ceramic cantilever resin-bonded fixed dental prostheses (RBFDPs) made of zirconia-ceramic with a single-retainer design to replace missing incisors. In addition, whether the reason for missing incisors has an influence on the longev...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2017.07.003
更新日期:2017-10-01 00:00:00
abstract::Memory and psychophysiological variables in persons with self-reported reactions to dental amalgam (amalgam patients: N=26) and in persons without such symptoms (controls: N=21) were compared. The groups were matched regarding age, education, and amount of amalgam. Wechsler Memory Scale-Revised was obtained for all su...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/s0300-5712(03)00086-1
更新日期:2003-09-01 00:00:00
abstract:OBJECTIVES:The purpose of this study was to evaluate the effects of a home bleaching gel containing 15% carbamide peroxide on the surface microhardness of four tooth-colored restorative materials in situ. METHODS:Four types of tooth-colored restorative materials, including a nanocomposite resin (Filtek Z350), a packab...
journal_title:Journal of dentistry
pub_type: 杂志文章,随机对照试验
doi:10.1016/j.jdent.2008.01.008
更新日期:2008-04-01 00:00:00
abstract::The complexity of the oral environment, and ethical problems associated with studies of oral diseases in humans inevitably directed the attention to development of laboratory models, that simulate the human oral microcosm. These developments and in particular the in vitro 'artificial mouth' systems have progressed fro...
journal_title:Journal of dentistry
pub_type: 杂志文章,评审
doi:10.1016/s0300-5712(03)00009-5
更新日期:2003-03-01 00:00:00
abstract:OBJECTIVE:To compare a silver-reinforced glass ionomer material (cermet) with a resin-modified glass ionomer in minimal Class II preparations in primary teeth. METHODS:Matched pairs of primary molars with approximal caries that required operative treatment were used. Each cavity was filled with either Vitremer or Keta...
journal_title:Journal of dentistry
pub_type: 临床试验,杂志文章,随机对照试验
doi:10.1016/s0300-5712(99)00004-4
更新日期:1999-08-01 00:00:00
abstract:OBJECTIVES:To compare the lifetime of Y-TZP/porcelain crowns under three different load conditions using step-stress accelerated lifetime testing. METHODS:The Y-TZP frameworks were milled using CAD/CAM, veneered with a porcelain and cemented onto dentine analogue dies. Specimens were divided according to the occlusal ...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2015.01.012
更新日期:2015-04-01 00:00:00
abstract:OBJECTIVE:To compare the mechanical behavior, and infer differences in fracture resistance, of mandibular molars with amalgam and composite MOD restorations to that of an unrestored molar. METHOD:Finite element models were developed for an unrestored molar and molars with MOD amalgam and composite restorations. The lo...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/s0300-5712(00)00036-1
更新日期:2001-01-01 00:00:00
abstract:OBJECTIVES:This systematic review aimed to verify if there is difference in the longevity of minimally invasive techniques compared to the complete replacement for the treatment of defective direct restorations in permanent teeth. DATA:The data included randomized controlled clinical trials comparing the clinical perf...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2018.09.001
更新日期:2018-11-01 00:00:00
abstract:OBJECTIVES:It is speculated that saliva, with its mineral content, may possess a reparative effect on an early erosion which is characterised by softened surface and slight subsurface demineralisation in addition to a crater. This study aimed to determine the possible remineralisation of early enamel erosion by saliva....
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/s0300-5712(01)00026-4
更新日期:2001-07-01 00:00:00
abstract:OBJECTIVES:This study investigated the effects of the surface conditioning of nano-zirconia fillers with 10-methacryloyloxydecyl dihydrogen phosphate (MDP) and dipentaerythritol penta-acrylate phosphate (PENTA) on the degree of conversion and mechanical properties of Bis-GMA- and UDMA-based resin composites containing ...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2020.103306
更新日期:2020-03-01 00:00:00
abstract:PURPOSE:This study determined the shear bond strength of a nanohybrid composite resin to bleached enamel immediately or 15 days later using different adhesive systems and laser application. METHODS:One hundred and forty enamel specimens were prepared from human molar teeth and bleached either with 16% carbamide peroxi...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2009.03.012
更新日期:2009-07-01 00:00:00
abstract:OBJECTIVES:Methacrylic compounds such as 2-hydroxyethyl methacrylate (HEMA), triethylene glycol dimethacrylate (TEGDMA) and bisphenol A glycerolate (1 glycerol/phenol) dimethacrylate (Bis-GMA) are largely present in auto- or photopolymerizable composite resins. Since the polymerization reaction is never complete, these...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2006.07.008
更新日期:2007-03-01 00:00:00
abstract:OBJECTIVES:Manufacturers are adding fluoride (F) to calcium-containing chewing gums to further promote enamel remineralization. The aim of this study was to assess the effect of a chewing gum containing phosphoryl oligosaccharides of calcium (POs-Ca) and fluoride on remineralization of enamel subsurface lesions, in a d...
journal_title:Journal of dentistry
pub_type: 杂志文章,随机对照试验
doi:10.1016/j.jdent.2011.08.009
更新日期:2011-11-01 00:00:00
abstract:OBJECTIVES:The purpose of the study was to evaluate gloss and color changes of resin composites after exposure to different bleaching agents. METHODS:Products used, were: Nite White ACP (10% carbamide peroxide gel), Crest Classic and Supreme Whitestrip (6.5% and 14% hydrogen peroxide strips, accordingly). A hybrid (He...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2010.06.006
更新日期:2010-01-01 00:00:00
abstract:OBJECTIVES:to explain the practice of wish-fulfilling medicine and how it relates to dentistry. SOURCES:Relevant papers, and reports from authoritative institutions were identified in Pubmed and Google Scholar. RESULTS:Wish-fulfilling medicine refers to services provided by professionals using medical methods in a me...
journal_title:Journal of dentistry
pub_type: 杂志文章,评审
doi:10.1016/j.jdent.2020.103302
更新日期:2020-05-01 00:00:00
abstract:OBJECTIVES:This study evaluated the effect of a chromium interlayer deposited by electroplating on the adhesion between titanium and porcelain by means of strain energy release rate (G-value (J/m(2)) or interfacial toughness). METHODS:Seventy rectangular specimens of commercially pure titanium (CP Ti) plates grade II ...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2010.05.003
更新日期:2010-08-01 00:00:00
abstract:OBJECTIVES:The purpose of this study was to determine enamel and dentin bond durability after long-term water storage using self-etch adhesives. METHODS:Two single step self-etch adhesives (SU, Scotchbond Universal and GB, G-ӕnial Bond) and a two-step self-etch adhesive (OX, OptiBond XTR) were used. The shear bond str...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2015.10.018
更新日期:2015-12-01 00:00:00
abstract:OBJECTIVES:The aim of this study was to determine the effect on tooth colour (after 1 and 2 weeks use) of a self-applied tooth-whitening gel containing 6% hydrogen peroxide using a novel applicator, compared to a standard fluoride toothpaste. METHODS:A 2-week, examiner-blind, stratified, parallel design clinical trial...
journal_title:Journal of dentistry
pub_type: 临床试验,杂志文章,随机对照试验
doi:10.1016/j.jdent.2003.10.008
更新日期:2004-01-01 00:00:00