Performance of 400 adhesive bridges fitted in a restorative dentistry department.

Abstract:

:The purpose was to present a descriptive report of the clinical performance of adhesive bridges fitted in a university department of restorative dentistry. The case records of 400 consecutive adhesive bridges fitted between November 1984 and June 1989 in the School of Clinical Dentistry, Queen's University, Belfast were reviewed. The majority of the bridges (66 per cent) were of a fixed-fixed Maryland design; the remainder were Maryland cantilevers (18 per cent), hybrids, i.e. Maryland cantilevers which slotted into conventional units (8 per cent), and Rochette bridges (6 per cent). The mean duration of clinical service at review was 2.7 years. One hundred (25 per cent) of the bridges debonded on at least one occasion. Of the bridges which debonded the average number of debonds was 1.7, with the first debond happening on average 10.7 months after placement (range 1-42 months). Fifty-seven (14 per cent) debonded on one occasion only; 25 (6 per cent) debonded twice and 18 (5 per cent) debonded on three or four occasions. The length of clinical service was a significant factor in relation to debonding. A lower proportion of posterior than anterior bridges debonded and cantilevered and hybrid designs performed well. It is concluded that this investigation confirms the efficacy of resin-bonded bridgework used to replace both anterior and posterior teeth.

journal_name

J Dent

journal_title

Journal of dentistry

authors

Hussey DL,Pagni C,Linden GJ

doi

10.1016/0300-5712(91)90122-f

subject

Has Abstract

pub_date

1991-08-01 00:00:00

pages

221-5

issue

4

eissn

0300-5712

issn

1879-176X

pii

0300-5712(91)90122-F

journal_volume

19

pub_type

杂志文章
  • Is chlorhexidine-methacrylate as effective as chlorhexidine digluconate in preserving resin dentin interfaces?

    abstract:OBJECTIVES:The aim of the current study was to evaluate the effect of 2% CHX and 2% CHX-methacrylate compared to the resin-dentin bonds created by a two-step etch-and-rinse adhesive system after 24h, 6min and 12min. METHODS:Microtensile bond strengths and interfacial nanoleakage within resin-dentin interfaces created ...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2015.11.002

    authors: Abu Nawareg M,Elkassas D,Zidan A,Abuelenain D,Abu Haimed T,Hassan AH,Chiba A,Bock T,Agee K,Pashley DH

    更新日期:2016-02-01 00:00:00

  • Pre-heating of high-viscosity bulk-fill resin composites: effects on shrinkage force and monomer conversion.

    abstract:OBJECTIVES:To investigate the influence of pre-heating of high-viscosity bulk-fill composite materials on their degree of conversion and shrinkage force formation. METHODS:Four bulk-fill composite materials (Tetric EvoCeram Bulk Fill-TECBF, x-tra fil-XF, QuixFil-QF, SonicFill-SF) and one conventional nano-hybrid resin...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2015.07.014

    authors: Tauböck TT,Tarle Z,Marovic D,Attin T

    更新日期:2015-11-01 00:00:00

  • Effects of buccal versus lingual surfaces, enamel conditioning procedures and storage duration on brackets debonding characteristics.

    abstract:OBJECTIVES:To determine the influence of two enamel conditioning techniques on buccal and lingual tooth surfaces at two different times on debonding strength and tooth damage. METHODS:The study included 50 premolars. Buccal and lingual surfaces of 10 teeth were scanned using SEM before (N=4) and after enamel condition...

    journal_title:Journal of dentistry

    pub_type: 临床试验,杂志文章,随机对照试验

    doi:10.1016/j.jdent.2004.08.005

    authors: Brosh T,Strouthou S,Sarne O

    更新日期:2005-02-01 00:00:00

  • Colour and surface analysis of carbamide peroxide bleaching effects on the dental restorative materials in situ.

    abstract:OBJECTIVES:The aim of this in vivo study was to evaluate the effects of a home-bleaching agent on the color and surface properties of four tooth-colored restorative materials. METHODS:Two composite resins (a nano-hybrid and a packable), a polyacid-modified composite and a conventional glass-ionomer were tested. Specim...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2009.01.003

    authors: Li Q,Yu H,Wang Y

    更新日期:2009-05-01 00:00:00

  • Effect of tooth-bleaching methods on gloss and color of resin composites.

    abstract:OBJECTIVES:The purpose of the study was to evaluate gloss and color changes of resin composites after exposure to different bleaching agents. METHODS:Products used, were: Nite White ACP (10% carbamide peroxide gel), Crest Classic and Supreme Whitestrip (6.5% and 14% hydrogen peroxide strips, accordingly). A hybrid (He...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2010.06.006

    authors: Anagnostou M,Chelioti G,Chioti S,Kakaboura A

    更新日期:2010-01-01 00:00:00

  • Mapping intraoral photographs on virtual teeth model.

    abstract:OBJECTIVES:Tooth shade is crucial to patient satisfaction in aesthetic dentistry. Two-dimensional (2D) clinical photographs have been widely used to record patients' tooth shade for creation of beautiful smile. However, in the digital workflow, 3D virtual teeth models in open file format contain only mesh information w...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2018.09.009

    authors: Lam WYH,Hsung RTC,Cheng LYY,Pow EHN

    更新日期:2018-12-01 00:00:00

  • Parental age as a risk factor for non-syndromic oral clefts: a meta-analysis.

    abstract:OBJECTIVES:A meta-analysis was conducted to assess the relationship between parental age and the occurrence of non-syndromic oral clefts. The questions addressed if younger or older mothers and fathers have an increased risk of having a child with non-syndromic oral clefts. DATA:Data from cohort studies, case-control,...

    journal_title:Journal of dentistry

    pub_type: 杂志文章,meta分析,评审

    doi:10.1016/j.jdent.2011.10.002

    authors: Herkrath AP,Herkrath FJ,Rebelo MA,Vettore MV

    更新日期:2012-01-01 00:00:00

  • Shear bond strengths of various luting cements to zirconia ceramic: surface chemical aspects.

    abstract:OBJECTIVES:To measure the shear bond strengths of various luting cements to a sandblasted zirconia ceramic and to determine the surface energy parameters of the luting cements. METHODS:Two conventional glass ionomer cements, two resin-modified glass ionomer cements, two compomer cements, and two adhesive resin cements...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2011.08.012

    authors: Kim MJ,Kim YK,Kim KH,Kwon TY

    更新日期:2011-11-01 00:00:00

  • Surface characterization of dental Y-TZP ceramic after air abrasion treatment.

    abstract:OBJECTIVE:The aim of this study was to characterize the surface of Y-TZP after abrasion with various airborne particles. METHODS:The Y-TZP blanks were cut into 44 discs and sintered according to the manufacturer's instructions. The specimens were treated as follows: (a) control specimens, (b) abraded with 50μm alumina...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2012.05.003

    authors: Hallmann L,Ulmer P,Reusser E,Hämmerle CH

    更新日期:2012-09-01 00:00:00

  • Randomized controlled trial comparing glass fiber posts and cast metal posts.

    abstract:OBJECTIVE:This study aimed to assess the survival and success of glass fiber posts compared to cast metal posts in teeth without ferrule. MATERIAL AND METHODS:An equivalency, prospective, double-blind (patient and outcome evaluator) randomized controlled trial (RCT) with parallel groups was designed to compare the cli...

    journal_title:Journal of dentistry

    pub_type: 杂志文章,随机对照试验

    doi:10.1016/j.jdent.2020.103334

    authors: Sarkis-Onofre R,Amaral Pinheiro H,Poletto-Neto V,Bergoli CD,Cenci MS,Pereira-Cenci T

    更新日期:2020-05-01 00:00:00

  • Microleakage around direct composite inlays.

    abstract::The purpose of this study was to compare the microleakage around direct composite inlays bonded with a dual cure luting composite into Class V type inlay cavities in extracted molar teeth. Bonding methods which included two cavity cleansing regimes and three bonding treatments were used. Either pumice and rinse or rin...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/0300-5712(91)90080-i

    authors: Shortall AC,Baylis RL

    更新日期:1991-10-01 00:00:00

  • Three-dimensional analysis of pulp chambers in maxillary second deciduous molars.

    abstract:OBJECTIVE:The purpose of this study was to clarify the positional relationship between the crown contour and the pulp chamber using micro-CT system for restorations of maxillary second deciduous molar. METHODS:Five maxillary second deciduous molar teeth each from the deciduous dentition and the mixed dentition periods...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2005.12.001

    authors: Amano M,Agematsu H,Abe S,Usami A,Matsunaga S,Suto K,Ide Y

    更新日期:2006-08-01 00:00:00

  • Enamel surface roughness and dental pulp response to coaxial carbon dioxide-neodymium: YAG laser irradiation.

    abstract::The purpose of this study was to evaluate the effect of a coaxial carbon dioxide/neodymium:yttrium aluminium garnet laser beam on enamel surface roughness and the dental pulps of mongrel dogs. In four dogs, four maxillary left posterior teeth were irradiated at 16 cm source-tooth distances. Two teeth were irradiated w...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/0300-5712(91)90095-g

    authors: Arcoria CJ,Steele RE,Wagner MJ,Judy MM,Matthews JL,Hults DF

    更新日期:1991-04-01 00:00:00

  • New polymeric materials for use in glass-ionomer cements.

    abstract::The polymeric materials currently used in GIC are based on poly(acrylic acid), poly(acrylic acid-co-itaconic acid), or poly(acrylic acid-co-maleic acid). For the visible light cured (VLC) type GIC, the polymeric material is chemically modified to have pendant free-radical polymerizable double bonds, with the aqueous f...

    journal_title:Journal of dentistry

    pub_type: 杂志文章,评审

    doi:10.1016/j.jdent.2005.08.008

    authors: Culbertson BM

    更新日期:2006-09-01 00:00:00

  • What the head of a university expects from the leadership of a dental school.

    abstract::The head of a university, especially of a research university, expects a great deal from the dean, and the dean's team, of a dental school. These leaders have to balance an especially complex set of tasks and, in the process, pursue maximum integration into their university. Dental deans should aspire to be at least e...

    journal_title:Journal of dentistry

    pub_type: 杂志文章,评审

    doi:10.1016/j.jdent.2019.05.003

    authors: Trainor R

    更新日期:2019-08-01 00:00:00

  • Comparison of three types of fiber-reinforced composite molar crowns on their fracture resistance and marginal adaptation.

    abstract:UNLABELLED:Three types of fiber-reinforced composite (FRC) molar crowns were tested on their fracture resistance and marginal adaptation under simulated oral stress conditions. Two glass fiber systems, one processed with a vacuum/pressure system, the other by manual fiber adaptation, and a polyethylene fiber system wer...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/s0300-5712(01)00007-0

    authors: Behr M,Rosentritt M,Latzel D,Kreisler T

    更新日期:2001-03-01 00:00:00

  • Outcome of direct restorations placed within the general dental services in England and Wales (Part 3): variation by dentist factors.

    abstract:AIM:It is the aim of this paper to investigate the survival of direct-placement restorations provided within the General Dental Services in England and Wales, in relation to the dentist factors which may affect this. METHODS:For this work, survival of a restoration was considered to be the time between the date of com...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2005.03.009

    authors: Lucarotti PS,Holder RL,Burke FJ

    更新日期:2005-11-01 00:00:00

  • Long-term follow-up of composite resin restorations with self-etching adhesives.

    abstract:OBJECTIVE:To test the hypothesis, derived from a previous short-term (7-day) assessment, that the absence of conventional pulp protection is not responsible for long-term pulp complications of composite resin restorations with self-etching adhesives. METHODS:All 150 patients who received the restorations with self-etc...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2007.02.005

    authors: Unemori M,Matsuya Y,Hyakutake H,Matsuya S,Goto Y,Akamine A

    更新日期:2007-06-01 00:00:00

  • Wear and morphology of infiltrated white spot lesions.

    abstract:OBJECTIVES:To evaluate the toothbrush wear resistance of infiltrated artificial white spot lesions following two infiltration strategies, and to assess their ultramorphology. METHODS:Flat enamel surfaces from freshly extracted bovine teeth were polished and immersed in a Buskes demineralising solution for 30 days to c...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2011.02.009

    authors: Belli R,Rahiotis C,Schubert EW,Baratieri LN,Petschelt A,Lohbauer U

    更新日期:2011-05-01 00:00:00

  • Novel multifunctional nanocomposite for root caries restorations to inhibit periodontitis-related pathogens.

    abstract:OBJECTIVES:The objectives of this study were to: (1) develop a novel multifunctional composite with nanoparticles of silver (NAg), 2-methacryloyloxyethyl phosphorylcholine (MPC), dimethylaminohexadecyl methacrylate (DMAHDM) and nanoparticles of amorphous calcium phosphate (NACP); and (2) investigate biofilm-inhibition ...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2018.12.001

    authors: Xiao S,Wang H,Liang K,Tay F,Weir MD,Melo MAS,Wang L,Wu Y,Oates TW,Ding Y,Xu HHK

    更新日期:2019-02-01 00:00:00

  • MAS-NMR spectroscopy studies in the setting reaction of glass ionomer cements.

    abstract:OBJECTIVES:The main objective is the characterisation of the setting reaction in glass ionomer cements based on experimental ionomer glasses with different fluorine content and a commercial glass ionomer cement liquid by using 13C CP/MAS-NMR, 29Si, 27Al and 31P MAS-NMR spectroscopy in order to receive information speci...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2005.08.006

    authors: Stamboulis A,Matsuya S,Hill RG,Law RV,Udoh K,Nakagawa M,Matsuya Y

    更新日期:2006-09-01 00:00:00

  • The effect of sandblasting on adhesion of a dual-cured resin composite to methacrylic fiber posts: microtensile bond strength and SEM evaluation.

    abstract:OBJECTIVES:To evaluate the influence of different surface treatments on the microtensile bond strength of a dual-cured resin composite to fiber posts. METHODS:Thirty-two glass methacrylate-based fiber posts (GC Corp.) were used in the study. Posts were divided into two groups, according to the surface pretreatment per...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2007.01.009

    authors: Radovic I,Monticelli F,Goracci C,Cury AH,Coniglio I,Vulicevic ZR,Garcia-Godoy F,Ferrari M

    更新日期:2007-06-01 00:00:00

  • Factors influencing the selection of restorative materials in dental care in Finland.

    abstract:OBJECTIVE:The aim of this study was to identify factors influencing the selection of restorative materials. METHODS:In 1992, a random sample of Finnish dentists working in the public and private health care sectors were asked to provide information on restorative treatments during a given period. The study material co...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/0300-5712(95)00070-4

    authors: Forss H,Widström E

    更新日期:1996-07-01 00:00:00

  • Two-year clinical trial of a universal adhesive in total-etch and self-etch mode in non-carious cervical lesions.

    abstract:OBJECTIVES:To compare the clinical performance of Scotchbond™ Universal Adhesive used in self- and total-etch modes and two-bottle Scotchbond™ Multi-purpose Adhesive in total-etch mode for Class 5 non-carious cervical lesions (NCCLs). METHODS:37 adults were recruited with 3 or 6 NCCLs (>1.5mm deep). Teeth were isolate...

    journal_title:Journal of dentistry

    pub_type: 杂志文章,随机对照试验

    doi:10.1016/j.jdent.2015.07.009

    authors: Lawson NC,Robles A,Fu CC,Lin CP,Sawlani K,Burgess JO

    更新日期:2015-10-01 00:00:00

  • Acupuncture for treating temporomandibular joint disorders: a systematic review and meta-analysis of randomized, sham-controlled trials.

    abstract:OBJECTIVE:The aim of this article was to assess the clinical evidence for or against acupuncture and acupuncture-like therapies as treatments for temporomandibular joint disorder (TMD). DATA:This systematic review includes randomized clinical trials (RCTs) of acupuncture as a treatment for TMD compared to sham acupunc...

    journal_title:Journal of dentistry

    pub_type: 杂志文章,meta分析,评审

    doi:10.1016/j.jdent.2011.02.006

    authors: Jung A,Shin BC,Lee MS,Sim H,Ernst E

    更新日期:2011-05-01 00:00:00

  • Effect of thickness on optical properties of monolithic CAD-CAM ceramics.

    abstract:OBJECTIVE:To compare the effect of material and thickness on the color stability and relative translucency parameters (RTP) for monolithic ceramics subjected to coffee thermocycling. METHODS:Four specimens each at thicknesses of 0.5, 0,7 and 1 mm were sectioned from monolithic ceramics [preshaded monolithic zirconia (...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2018.01.010

    authors: Subaşı MG,Alp G,Johnston WM,Yilmaz B

    更新日期:2018-04-01 00:00:00

  • Color stability of silorane-based composites submitted to accelerated artificial ageing--an in situ study.

    abstract:OBJECTIVES:To assess the in situ color stability, surface and the tooth/restoration interface degradation of a silorane-based composite (P90, 3M ESPE) after accelerated artificial ageing (AAA), in comparison with other dimethacrylate monomer-based composites (Z250/Z350, 3M ESPE and Esthet-X, Dentsply). METHODS:Class V...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2011.03.003

    authors: Pires-de-Souza Fde C,Garcia Lda F,Roselino Lde M,Naves LZ

    更新日期:2011-07-01 00:00:00

  • Bonding effectiveness and interfacial characterization of a HEMA/TEGDMA-free three-step etch&rinse adhesive.

    abstract:OBJECTIVES:Small and hydrophilic monomers as HEMA and TEGDMA can easily penetrate human tissues. For biocompatibility issues it is therefore better to avoid such monomers in dental adhesive formulations. The purpose of this study was (1) to determine the micro-tensile bond strength (muTBS) to enamel/dentin of a HEMA/TE...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2008.05.012

    authors: Mine A,De Munck J,Van Landuyt KL,Poitevin A,Kuboki T,Yoshida Y,Suzuki K,Lambrechts P,Van Meerbeek B

    更新日期:2008-10-01 00:00:00

  • Effect of pit and fissure sealants on caries detection by a fluorescent camera system.

    abstract:OBJECTIVE:The aim of this study was to evaluate the effect of sealant placement on the detection of caries by a fluorescent camera (FC), the Spectra caries detector. MATERIALS AND METHODS:In a laboratory study, FC images and readings were obtained from 31 extracted teeth, before and following application of clear seal...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2013.05.005

    authors: Markowitz K,Rosenfeld D,Peikes D,Guzy G,Rosivack G

    更新日期:2013-07-01 00:00:00

  • Perceptibility and acceptability of CIELAB color differences in computer-simulated teeth.

    abstract:OBJECTIVES:To determine the perceptibility and acceptability of tooth color differences using computer-generated pairs of teeth with simulated gingival displayed on a calibrated color monitor using appropriate signal detection theory methodology (SDT). METHODS:Twelve dental professionals (four from each of the followi...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2007.03.006

    authors: Lindsey DT,Wee AG

    更新日期:2007-07-01 00:00:00