Two-year clinical trial of a universal adhesive in total-etch and self-etch mode in non-carious cervical lesions.

Abstract:

OBJECTIVES:To compare the clinical performance of Scotchbond™ Universal Adhesive used in self- and total-etch modes and two-bottle Scotchbond™ Multi-purpose Adhesive in total-etch mode for Class 5 non-carious cervical lesions (NCCLs). METHODS:37 adults were recruited with 3 or 6 NCCLs (>1.5mm deep). Teeth were isolated, and a short cervical bevel was prepared. Teeth were restored randomly with Scotchbond Universal total-etch, Scotchbond Universal self-etch or Scotchbond Multi-purpose followed with a composite resin. Restorations were evaluated at baseline, 6, 12 and 24 months for marginal adaptation, marginal discoloration, secondary caries, and sensitivity to cold using modified USPHS Criteria. Patients and evaluators were blinded. Logistic and linear regression models using a generalized estimating equation were applied to evaluate the effects of time and adhesive material on clinical assessment outcomes over the 24 month follow-up period. Kaplan-Meier method was used to compare the retention between adhesive materials. RESULTS:Clinical performance of all adhesive materials deteriorated over time for marginal adaptation, and discoloration (p<0.0001). Both Scotchbond Universal self-etch and Scotchbond Multi-purpose materials were more than three times as likely to contribute to less satisfying performance in marginal discoloration over time than Scotchbond Universal total-etch. The retention rates up to 24 months were 87.6%, 94.9% and 100% for Scotchbond Multi-purpose and Scotchbond Universal self-etch and total-etch, respectively. CONCLUSIONS:Scotchbond Universal in self- and total- etch modes performed similar to or better than Scotchbond Multipurpose, respectively. CLINICAL SIGNIFICANCE:24 month evaluation of a universal adhesive indicates acceptable clinical performance, particularly in a total-etch mode.

journal_name

J Dent

journal_title

Journal of dentistry

authors

Lawson NC,Robles A,Fu CC,Lin CP,Sawlani K,Burgess JO

doi

10.1016/j.jdent.2015.07.009

subject

Has Abstract

pub_date

2015-10-01 00:00:00

pages

1229-34

issue

10

eissn

0300-5712

issn

1879-176X

pii

S0300-5712(15)30016-6

journal_volume

43

pub_type

杂志文章,随机对照试验
  • Incisal coverage or not in ceramic laminate veneers: A systematic review and meta-analysis.

    abstract:BACKGROUND:There is no consensus on whether incisal coverage is a risk or a protective factor in preparations for ceramic veneers. OBJECTIVE:The aim of this systematic review and meta-analysis was to evaluate the survival rates of preparation designs for ceramic veneers with and without incisal coverage. METHODS:Prim...

    journal_title:Journal of dentistry

    pub_type: 杂志文章,meta分析,评审

    doi:10.1016/j.jdent.2016.06.004

    authors: Albanesi RB,Pigozzo MN,Sesma N,Laganá DC,Morimoto S

    更新日期:2016-09-01 00:00:00

  • Evaluation of the enamel etching capacity of six contemporary self-etching adhesives.

    abstract:OBJECTIVES:The purpose of this study was to evaluate the capacity of six contemporary self-etch primers/adhesives to demineralize ground enamel by means of ultrastructural analysis of the etching surface under SEM and by spectroscopic measurement of the percentage of calcium and phosphate ions dissolved. METHODS:Seven...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2006.11.003

    authors: Grégoire G,Ahmed Y

    更新日期:2007-05-01 00:00:00

  • Influence of chromium interlayer on the adhesion of porcelain to machined titanium as determined by the strain energy release rate.

    abstract:OBJECTIVES:This study evaluated the effect of a chromium interlayer deposited by electroplating on the adhesion between titanium and porcelain by means of strain energy release rate (G-value (J/m(2)) or interfacial toughness). METHODS:Seventy rectangular specimens of commercially pure titanium (CP Ti) plates grade II ...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2010.05.003

    authors: Elsaka SE,Hamouda IM,Elewady YA,Abouelatta OB,Swain MV

    更新日期:2010-08-01 00:00:00

  • Surface characterization of dental Y-TZP ceramic after air abrasion treatment.

    abstract:OBJECTIVE:The aim of this study was to characterize the surface of Y-TZP after abrasion with various airborne particles. METHODS:The Y-TZP blanks were cut into 44 discs and sintered according to the manufacturer's instructions. The specimens were treated as follows: (a) control specimens, (b) abraded with 50μm alumina...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2012.05.003

    authors: Hallmann L,Ulmer P,Reusser E,Hämmerle CH

    更新日期:2012-09-01 00:00:00

  • Human epithelial tissue culture study on restorative materials.

    abstract:OBJECTIVES:Health condition of the gingival tissues contacting the surfaces of fixed prostheses is a result of multiple etiologic factors. The aim of the investigation discussed here was to evaluate the attachment and proliferation rate of cultured human epithelial cells on three commonly used restorative materials und...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2013.11.008

    authors: Forster A,Ungvári K,Györgyey Á,Kukovecz Á,Turzó K,Nagy K

    更新日期:2014-01-01 00:00:00

  • Internal adaptation, marginal accuracy and microleakage of a pressable versus a machinable ceramic laminate veneers.

    abstract:OBJECTIVES:The aim of this study was to evaluate the internal adaptation and marginal properties of ceramic laminate veneers fabricated using pressable and machinable CAD/CAM techniques. MATERIALS AND METHODS:40 ceramic laminate veneers were fabricated by either milling ceramic blocks using a CAD/CAM system (group 1 n...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2012.04.019

    authors: Aboushelib MN,Elmahy WA,Ghazy MH

    更新日期:2012-08-01 00:00:00

  • Laboratory performance and fracture resistance of CAD/CAM implant-supported tooth-coloured anterior FDPs.

    abstract:OBJECTIVES:This study investigated the in-vitro performance and fracture force of anterior implant-supported tooth-coloured fixed dental prosthesis (FDPs). Different material types with varying flexural strength and modulus of elasticity were compared with screw-retained or bonded application. MATERIALS AND METHODS:Id...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2020.103326

    authors: Zacher J,Bauer R,Strasser T,Rosentritt M

    更新日期:2020-05-01 00:00:00

  • Impact of moderate and severe hypodontia and amelogenesis imperfecta on quality of life and self-esteem of adult patients.

    abstract:OBJECTIVES:The objective of this study was to investigate the impact of moderate and severe hypodontia and amelogenesis imperfecta on the quality of life and self-esteem of affected adult patients. METHODS:Forty one adult patients (aged 18-45 years) with clinical and radiological diagnoses of moderate to severe hypodo...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2013.06.004

    authors: Hashem A,Kelly A,O'Connell B,O'Sullivan M

    更新日期:2013-08-01 00:00:00

  • The inhibitory effect of proanthocyanidin on soluble and collagen-bound proteases.

    abstract:OBJECTIVE:This study evaluated the inhibitory effect of proanthocyanidin (PA), a natural collagen cross-linker, on soluble and matrix-bound proteases, which are responsible for progressive degradation of exposed collagen fibrils within the hybrid layer and resin-dentine bond failure over time. METHODS:The inhibitory e...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2013.06.002

    authors: Epasinghe DJ,Yiu CK,Burrow MF,Hiraishi N,Tay FR

    更新日期:2013-09-01 00:00:00

  • Inhibition of hybrid layer degradation by cavity pretreatment: Meta- and trial sequential analysis.

    abstract:OBJECTIVES:Inhibition of hybrid layer degradation, for example via inhibition of matrix-metallo-proteinases (MMP) could reduce risk of retention loss and failure of adhesively placed restorations. This systematic review investigated such inhibitory pretreatment qualitatively and via meta- and trial-sequential-analysis....

    journal_title:Journal of dentistry

    pub_type: 杂志文章,meta分析,评审

    doi:10.1016/j.jdent.2016.04.007

    authors: Göstemeyer G,Schwendicke F

    更新日期:2016-06-01 00:00:00

  • Comparison of the marginal integrity of in vivo and in vitro Class II composite restorations.

    abstract::In the present study Class II resin composite restorations were placed under in vivo and in vitro conditions. For the in vivo part. Class II preparations were cut in teeth destined for extraction for orthodontic reasons. The preparations were completed with the gingival margin in enamel and restored using six differen...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/0300-5712(93)90026-m

    authors: Abdalla AI,Davidson CL

    更新日期:1993-06-01 00:00:00

  • Cardiopulmonary performance following changes in position and the administration of intravenous Diazemuls.

    abstract::Twenty healthy volunteers entered a study to assess cardiopulmonary responses, as measured by pulse oximetry, following changes in posture in the dental chair and the administration of Diazemuls (diazepam) in doses sufficient to instill sedation (up to a maximum dose of 20 mg) in the volunteers to a degree such that p...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/0300-5712(92)90080-v

    authors: Gallon P,Walton GM,Rood JP

    更新日期:1992-08-01 00:00:00

  • Microbiological impressions of teeth, saliva and dietary fibre can predict caries activity.

    abstract:OBJECTIVES:Mutans streptococci and Lactobacilli on impressions of teeth and caries tests were used to identify caries prone subjects. METHODS:Twenty-seven dental students were examined for caries initially and after 4 years. At the initial examination plaque index; saliva flow, buffering capacity and lysozyme; sucrose...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2008.07.004

    authors: Coogan MM,Mackeown JM,Galpin JS,Fatti LP

    更新日期:2008-11-01 00:00:00

  • Wear and morphology of infiltrated white spot lesions.

    abstract:OBJECTIVES:To evaluate the toothbrush wear resistance of infiltrated artificial white spot lesions following two infiltration strategies, and to assess their ultramorphology. METHODS:Flat enamel surfaces from freshly extracted bovine teeth were polished and immersed in a Buskes demineralising solution for 30 days to c...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2011.02.009

    authors: Belli R,Rahiotis C,Schubert EW,Baratieri LN,Petschelt A,Lohbauer U

    更新日期:2011-05-01 00:00:00

  • Meta-analysis of anterior veneer restorations in clinical studies.

    abstract:OBJECTIVES:To make an inventory of clinical studies on veneer restorations (VRs) using a meta-analysis review procedure and to aggregate an overall survival result for four types of VRs. METHODS:From the dental literature published from 1983 to November 1996, papers were selected using an in- and exclusion protocol in...

    journal_title:Journal of dentistry

    pub_type: 杂志文章,meta分析

    doi:10.1016/s0300-5712(97)00023-7

    authors: Kreulen CM,Creugers NH,Meijering AC

    更新日期:1998-05-01 00:00:00

  • Bond strength to dentine of two light-activated glass polyalkenoate (ionomer) cements.

    abstract::The effects of sample thickness on the in vitro bond strength of two light-activated glass polyalkenoate cements to dentine have been investigated. The buccal and/or lingual surfaces of non-carious human third molar teeth were used for bonding. The tensile bond strengths to dentine of samples of the cements of 0.5 mm,...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/0300-5712(94)90123-6

    authors: Bourke AM,Walls AW,McCabe JF

    更新日期:1994-08-01 00:00:00

  • Effect of sandblasting, grinding, polishing and glazing on the flexural strength of two pressable all-ceramic dental materials.

    abstract:OBJECTIVES:During laboratory fabrication procedures and/or clinical adjustments, pressable materials: IPS Empress and Empress 2, may be ground, polished or sandblasted. These treatments may affect their strength by introducing microscopic flaws and defects. This study investigates the effect of these procedures on the ...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2003.08.006

    authors: Albakry M,Guazzato M,Swain MV

    更新日期:2004-02-01 00:00:00

  • Performance of techniques used for re-attachment of endodontically treated crown fractured teeth.

    abstract:OBJECTIVES:The aim of this study was to compare the fracture strength of three techniques used to re-attach tooth fragments in sound and endodontically treated fractured teeth with or without fiber post placement. MATERIAL AND METHODS:Ninety human lower incisors were randomly divided into three groups of 30 teeth each...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2008.01.001

    authors: Loguercio AD,Leski G,Sossmeier D,Kraul A,Oda M,Patzlaff RT,Reis A

    更新日期:2008-04-01 00:00:00

  • Rechargeable dental adhesive with calcium phosphate nanoparticles for long-term ion release.

    abstract:OBJECTIVES:The tooth-resin bond is the weak link of restoration, with secondary caries as a main reason for failure. Calcium phosphate-containing resins are promising for remineralization; however, calcium (Ca) and phosphate (P) ion releases last only a couple of months. The objectives of this study were to develop the...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2015.06.009

    authors: Zhang L,Weir MD,Hack G,Fouad AF,Xu HH

    更新日期:2015-12-01 00:00:00

  • The effect of tooth age on colour adjustment potential of resin composite restorations.

    abstract:OBJECTIVES:The purpose of this study was to investigate the effect of tooth age on colour adjustment potential of resin composite restorations in human teeth. METHODS:Twenty extracted human premolars with an A2 shade, extracted for orthodontic reasons from younger patients (20-28yrs) (younger teeth) and periodontal re...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2014.09.007

    authors: Tanaka A,Nakajima M,Seki N,Foxton RM,Tagami J

    更新日期:2015-02-01 00:00:00

  • A 4-year retrospective clinical study of Class I and Class II composite restorations.

    abstract:OBJECTIVES:The purpose of this study was to determine the longevity and quality of Class I and Class II resin composite (Herculite XR) restorations placed in private practice. METHODS:One thousand two hundred and nine Class I and Class II composite restorations with margins in enamel were evaluated clinically after pe...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/s0300-5712(96)00027-9

    authors: Geurtsen W,Schoeler U

    更新日期:1997-05-01 00:00:00

  • The effect of Parylene coating on the surface roughness of PMMA after brushing.

    abstract:OBJECTIVES:Acrylic resins, used in the manufacturing of different types of intra-oral prostheses, are vulnerable to colonisation by microorganisms which potentially endanger the general health of the prostheses, wearers. The aim of this study was to investigate the influence of a novel coating (Parylene) on surface rou...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2013.06.011

    authors: Santos M,Soo S,Petridis H

    更新日期:2013-09-01 00:00:00

  • Cast metal vs. glass fibre posts: a randomized controlled trial with up to 3 years of follow up.

    abstract:OBJECTIVE:This randomized controlled trial compared the survival of glass fibre and cast metal dental posts used to restore endodontically treated teeth with no remaining coronal wall. METHODS:Fifty-four participants (45 women) and 72 teeth were evaluated during a follow-up period of up to 3 years. Teeth were randomly...

    journal_title:Journal of dentistry

    pub_type: 杂志文章,随机对照试验

    doi:10.1016/j.jdent.2014.02.003

    authors: Sarkis-Onofre R,Jacinto RC,Boscato N,Cenci MS,Pereira-Cenci T

    更新日期:2014-05-01 00:00:00

  • The volumetric fraction of inorganic particles and the flexural strength of composites for posterior teeth.

    abstract:OBJECTIVE:To evaluate the content of inorganic particles and the flexural strength of new condensable composites for posterior teeth in comparison to hybrid conventional composites. METHOD:The determination of the content of inorganic particles was performed by mass weighing of a polymerized composite before and after...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/s0300-5712(03)00049-6

    authors: Adabo GL,dos Santos Cruz CA,Fonseca RG,Vaz LG

    更新日期:2003-07-01 00:00:00

  • Effects of a chewing gum containing phosphoryl oligosaccharides of calcium (POs-Ca) and fluoride on remineralization and crystallization of enamel subsurface lesions in situ.

    abstract:OBJECTIVES:Manufacturers are adding fluoride (F) to calcium-containing chewing gums to further promote enamel remineralization. The aim of this study was to assess the effect of a chewing gum containing phosphoryl oligosaccharides of calcium (POs-Ca) and fluoride on remineralization of enamel subsurface lesions, in a d...

    journal_title:Journal of dentistry

    pub_type: 杂志文章,随机对照试验

    doi:10.1016/j.jdent.2011.08.009

    authors: Kitasako Y,Tanaka M,Sadr A,Hamba H,Ikeda M,Tagami J

    更新日期:2011-11-01 00:00:00

  • Patients' preferences for selective versus complete excavation: A mixed-methods study.

    abstract:OBJECTIVES:Despite increasing evidence supporting selective caries tissue removal, the technique is not adopted by most dentists, one possible reason being that patients might reject it. We aimed to assess patients' preferences for selective versus complete excavation, and to identify predictors of this preference. ME...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2016.01.006

    authors: Schwendicke F,Mostajaboldave R,Otto I,Dörfer CE,Burkert S

    更新日期:2016-03-01 00:00:00

  • MAS-NMR spectroscopy studies in the setting reaction of glass ionomer cements.

    abstract:OBJECTIVES:The main objective is the characterisation of the setting reaction in glass ionomer cements based on experimental ionomer glasses with different fluorine content and a commercial glass ionomer cement liquid by using 13C CP/MAS-NMR, 29Si, 27Al and 31P MAS-NMR spectroscopy in order to receive information speci...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2005.08.006

    authors: Stamboulis A,Matsuya S,Hill RG,Law RV,Udoh K,Nakagawa M,Matsuya Y

    更新日期:2006-09-01 00:00:00

  • Effects of sodium ascorbate on microtensile bond strength of total-etching adhesive system to NaOCl treated dentine.

    abstract:OBJECTIVE:The purpose of this study was to determine the microtensile bond strengths of total etching adhesive systems to pulpal chamber wall dentine after treated with various irrigants. METHODS:Thirty extracted human third molars were cut horizontally to expose the pulp horn. The roof of the pulp chamber and pulp ti...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2005.01.008

    authors: Vongphan N,Senawongse P,Somsiri W,Harnirattisai C

    更新日期:2005-09-01 00:00:00

  • Comparative study of demineralized collagen degradation determined by hydroxyproline assay and microscopic depth measurement.

    abstract:INTRODUCTION:Quantification of collagen degradation is an important parameter to evaluate dentin caries progression or the efficacy of caries prevention aid. The aim of this study was to validate the simple light microscopic technique (LM) to evaluate collagen degradation by comparing with hydroxyproline assay techniqu...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2016.01.001

    authors: Islam MS,Khunkar SJ,Nakashima S,Sadr A,Nikaido T,Tagami J

    更新日期:2016-04-01 00:00:00

  • Three-dimensional analysis of pulp chambers in maxillary second deciduous molars.

    abstract:OBJECTIVE:The purpose of this study was to clarify the positional relationship between the crown contour and the pulp chamber using micro-CT system for restorations of maxillary second deciduous molar. METHODS:Five maxillary second deciduous molar teeth each from the deciduous dentition and the mixed dentition periods...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2005.12.001

    authors: Amano M,Agematsu H,Abe S,Usami A,Matsunaga S,Suto K,Ide Y

    更新日期:2006-08-01 00:00:00