Abstract:
OBJECTIVE:The purpose of this study was to determine the microtensile bond strengths of total etching adhesive systems to pulpal chamber wall dentine after treated with various irrigants. METHODS:Thirty extracted human third molars were cut horizontally to expose the pulp horn. The roof of the pulp chamber and pulp tissues were removed. The teeth were then divided into five groups of five specimens each to treat with various irrigants. Specimens in each group were treated as follows: group 1, with water for 10 min; group 2, with sodium hypochlorite for 10 min; group 3, with sodium hypochlorite for 10 min and water for 10 min; group 4, with sodium hypochlorite for 10 min and sodium ascorbate for 10 min; group 5, with sodium hypochlorite for 10 min, sodium ascorbate for 10 min and water 10 min. Treated specimens were dried, bonded with a total-etching adhesive system (single bond) and restored with a resin composite (Z250) then kept for 24 h before determination of the microtensile bond strengths. RESULTS:Group 2 (20.96+/-9.23 MPa) demonstrated significantly lower bond strengths than group 1 (30.06+/-10.44 MPa). No significant differences in bond strengths were found between group 3 (23.08+/-6.94) and group 2. Group 4 (40.55+/-8.99) demonstrated higher bond strengths than group 2. However, there were no significant differences between group 5 (24.55+/-9.73 MPa) and group 2. CONCLUSIONS:Sodium hypochlorite significantly reduced the bond strengths of the adhesive when a total-etching was applied. The application of sodium ascorbate on sodium hypochlorite treated dentine significantly improved the bond strengths.
journal_name
J Dentjournal_title
Journal of dentistryauthors
Vongphan N,Senawongse P,Somsiri W,Harnirattisai Cdoi
10.1016/j.jdent.2005.01.008keywords:
subject
Has Abstractpub_date
2005-09-01 00:00:00pages
689-95issue
8eissn
0300-5712issn
1879-176Xpii
S0300-5712(05)00038-2journal_volume
33pub_type
杂志文章abstract:OBJECTIVE:The purpose of this study was to compare microleakage of glass ionomer materials (GIC) using two different modes of cavity preparation: a high-speed hand piece and an erbium/yttrium-aluminum-garnet (Er/YAG) laser. METHODS:Eighty caries free permanent molar teeth had class V preparations cut on both the bucca...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/s0300-5712(02)00011-8
更新日期:2002-05-01 00:00:00
abstract:OBJECTIVES:Firstly, to evaluate the in vitro anti-erosion efficacy of a new mouthrinse formulation containing 450 ppm fluoride using profilometry and microindentation. Secondly, to compare fluoride uptake by erosive lesions from two mouthrinses containing different fluoride sources using dynamic secondary ion mass spec...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/S0300-5712(11)70004-5
更新日期:2010-11-01 00:00:00
abstract:OBJECTIVES:Despite increasing evidence supporting selective caries tissue removal, the technique is not adopted by most dentists, one possible reason being that patients might reject it. We aimed to assess patients' preferences for selective versus complete excavation, and to identify predictors of this preference. ME...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2016.01.006
更新日期:2016-03-01 00:00:00
abstract:OBJECTIVES:To determine at 5 year follow-up the failure rate, wear rates and other aspects of clinical performance of direct composite inlays compared with conventional composite restorations placed incrementally. METHODS:100 matched pairs of restorations were originally entered into the trial. Each pair consisted of ...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/s0300-5712(00)00013-0
更新日期:2000-08-01 00:00:00
abstract::In the present study Class II resin composite restorations were placed under in vivo and in vitro conditions. For the in vivo part. Class II preparations were cut in teeth destined for extraction for orthodontic reasons. The preparations were completed with the gingival margin in enamel and restored using six differen...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/0300-5712(93)90026-m
更新日期:1993-06-01 00:00:00
abstract:OBJECTIVES:To assess the accuracy of a novel, non-invasive method for determining the axis of rotation of articulated dental study casts. METHOD:A 3D structured light scanner was constructed using a projector and two CMOS cameras. Dental stone casts were arbitrarily mounted on an average value articulator. With the te...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2013.11.019
更新日期:2014-02-01 00:00:00
abstract:OBJECTIVES:The aim of this study was to investigate the mechanical properties of five types of fibre-reinforced composite (FRC) posts and compare them with traditional metal post. METHODS:Five FRC posts and a metallic post having different geometry and type of fibre (glass, carbon or quartz fibre) were loaded to failu...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2012.08.003
更新日期:2012-11-01 00:00:00
abstract:OBJECTIVES:The goal of this study was to evaluate influence of different shade guides and respective shade matching methods on shade matching results and to analyze user satisfaction with these products and methods. METHODS:Eighty-eight pre-doctoral dental students completed the study. The color of four target shade t...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2009.02.005
更新日期:2009-01-01 00:00:00
abstract:OBJECTIVES:To evaluate the changes in oral health-related quality of life (OHRQoL) reported by subjects treated with conventional prostheses. METHODS:A consecutive sample of 153 patients seeking prosthodontic rehabilitation was recruited. Socio-demographic and prosthetic-related factors (Eichner Index; number of occlu...
journal_title:Journal of dentistry
pub_type: 临床试验,杂志文章
doi:10.1016/j.jdent.2013.01.006
更新日期:2013-06-01 00:00:00
abstract:OBJECTIVES:Following tooth pulp exposure, pulpal repair is accomplished by dentine bridge secretion by odontoblast-like cells. However, little information is available about the hierarchy of variables, which influence odontoblast-like cell numbers. The purpose of this study was to examine correlations between pulp capp...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/s0300-5712(02)00024-6
更新日期:2002-09-01 00:00:00
abstract:OBJECTIVES:To investigate repairs of direct restorations by a group of Dutch general dental practitioners (GDPs) and its consequences on longevity of restorations. METHODS:Data set was based on dental records of patients attending 11 general dental practices (24 Dentists) in the Netherlands. Patients that received Cla...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2017.06.002
更新日期:2017-09-01 00:00:00
abstract:OBJECTIVE:The intent of this project was to evaluate the efficiency of three commercial amalgam separators based on mercury and particle removal. METHODS:Dental wastewater samples were collected from a 54-chair dental clinic and a one chair private dental office. Atomic absorption spectrometry was used to measure merc...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/s0300-5712(02)00067-2
更新日期:2003-01-01 00:00:00
abstract:OBJECTIVE:This study evaluated whether Quantitative Light-induced Fluorescence-Digital (QLF-D) can detect the levels of cariogenicity of dental microcosm biofilms by assessing the red fluorescence intensity. METHODS:Dental microcosm biofilms were initiated from human saliva on bovine enamel discs. Biofilms with variou...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2013.08.021
更新日期:2013-12-01 00:00:00
abstract::In a previous study concerning oral function with shortened dental arches, it was found that approximately 10 per cent of the patients investigated complained of impaired masticatory ability despite a substantial reduction in arch length and, as a consequence, food platform area. This finding differs from those of stu...
journal_title:Journal of dentistry
pub_type: 杂志文章,评审
doi:10.1016/0300-5712(90)90107-p
更新日期:1990-08-01 00:00:00
abstract:OBJECTIVES:Evaluate erosive potential of beverages, using exposure times from 3 to 30 min, and to analyse the relationship between erosion and several drink parameters. METHODS:pH, calcium, phosphate and fluoride concentration, saturation, titratable-acidity to pH 5.5 and the viscosity of sixteen beverages were measur...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2012.09.004
更新日期:2012-12-01 00:00:00
abstract:OBJECTIVES:This in vitro study examined the resistance to displacement offered by guide planes and the displacement mechanics of a bilateral bounded saddle cast cobalt chrome alloy removable partial denture framework under conditions simulating an average initial fit. METHODS:A specially designed model mouth jig fitte...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/s0300-5712(01)00016-1
更新日期:2001-05-01 00:00:00
abstract:OBJECTIVES:Inhibition of hybrid layer degradation, for example via inhibition of matrix-metallo-proteinases (MMP) could reduce risk of retention loss and failure of adhesively placed restorations. This systematic review investigated such inhibitory pretreatment qualitatively and via meta- and trial-sequential-analysis....
journal_title:Journal of dentistry
pub_type: 杂志文章,meta分析,评审
doi:10.1016/j.jdent.2016.04.007
更新日期:2016-06-01 00:00:00
abstract:OBJECTIVES:Effective delivery of active agents to dental hard tissues is critical to product performance and pertinent to biofilm control, caries, erosion, hypersensitivity and tooth bleaching. The aim of this study was to investigate in vitro the bioadhesion and retention behaviour of non-aqueous delivery systems (NAD...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2010.06.005
更新日期:2010-09-01 00:00:00
abstract:OBJECTIVES:The aim of this study was to investigate new dentin bonding agents formulated with 2,3-epithiopropyl methacrylate (ETMA) comonomer blends. METHODS:Synthesis and characterization of ETMA were performed. Adhesive resins with three different ETMA concentrations (0.1, 1 and 10 wt.%) were prepared. To comparison...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2005.11.001
更新日期:2006-08-01 00:00:00
abstract:OBJECTIVES:To assess the in situ color stability, surface and the tooth/restoration interface degradation of a silorane-based composite (P90, 3M ESPE) after accelerated artificial ageing (AAA), in comparison with other dimethacrylate monomer-based composites (Z250/Z350, 3M ESPE and Esthet-X, Dentsply). METHODS:Class V...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2011.03.003
更新日期:2011-07-01 00:00:00
abstract:OBJECTIVES:It is speculated that saliva, with its mineral content, may possess a reparative effect on an early erosion which is characterised by softened surface and slight subsurface demineralisation in addition to a crater. This study aimed to determine the possible remineralisation of early enamel erosion by saliva....
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/s0300-5712(01)00026-4
更新日期:2001-07-01 00:00:00
abstract:OBJECTIVE:To study the combined effect of simulated occlusal loading and plaque-derived biofilm on the interfacial integrity of dental composite restorations, and to explore whether the effects are modulated by the incorporation of sucrose. METHODS:MOD-class-II restorations were prepared in third molars. Half of the s...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2017.08.009
更新日期:2017-11-01 00:00:00
abstract:OBJECTIVES:To evaluate the incidence of prosthetic complications in implant-retained crowns made with UCLA castable abutments and to identify possible risk factors with a view to establishing recommendations to help predict the success of such restorations. METHODS:A cohort follow-up study was carried out in 71 partia...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2012.09.001
更新日期:2012-12-01 00:00:00
abstract:OBJECTIVE:To evaluate the effect of shading technique and thickness on the color stability and translucency of translucent zirconia after coffee thermocycling. METHODS:Specimens in different thicknesses (1; 1.5; 2 mm) (n = 4 for each thickness) were sectioned from translucent preshaded zirconia (Pre) and externally sh...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2018.03.011
更新日期:2018-06-01 00:00:00
abstract:OBJECTIVES:To investigate the prevalence of Combination Syndrome, and to investigate if provision of a mandibular removable partial denture has any influence on the prevalence of Combination Syndrome. METHOD:Patients attending Kings College London Dental Institute, Guys Hospital who wore maxillary conventional complet...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2019.01.016
更新日期:2019-03-01 00:00:00
abstract:OBJECTIVES:Probiotics might be beneficial to prevent or treat caries, gingivitis or periodontitis. We aimed to appraise trials assessing probiotics for managing caries and periodontal disease. DATA:We included randomized controlled trials comparing the efficacy of probiotics versus (placebo) control with regards to St...
journal_title:Journal of dentistry
pub_type: 杂志文章,meta分析,评审
doi:10.1016/j.jdent.2016.03.002
更新日期:2016-05-01 00:00:00
abstract:OBJECTIVES:To carry out a systematic review and meta-analysis of studies that investigated changes in perceived quality of life following vital tooth bleaching. METHODS:Online searches (Medline, PubMed, the Cochrane database of systemic reviews and Google scholar), bibliographic, and manual searches were carried out. ...
journal_title:Journal of dentistry
pub_type: meta分析
doi:10.1016/j.jdent.2019.03.007
更新日期:2019-05-01 00:00:00
abstract:OBJECTIVE:To compare the permeability of the occlusal and the cervical dentinal regions within the same tooth, which represent the bottom of Class I and V cavities, respectively, with two different compositions of perfusion fluid, in vitro. METHODS:An occlusal and a buccal disc were cut from each extracted third molar...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/s0300-5712(02)00005-2
更新日期:2002-02-01 00:00:00
abstract:OBJECTIVES:The aim of this study was to evaluate the effect of a zinc-based particle with ionic liquid as filler for an experimental adhesive resin. METHODS:The ionic liquid 1-n-butyl-3-methylimidazolium chloride (BMI.Cl) and zinc chloride (ZnCl2) were used to synthesize 1-n-butyl-3-methylimidazolium trichlorozincate ...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2020.103477
更新日期:2020-11-01 00:00:00
abstract:OBJECTIVE:To investigate the flexural strength and fluoride release of four conventional glass-ionomer cements: Ketac-Molar (KM), HiFi (HF), Vivaglass Fil (VF), Ketac-Fil (KF) and a newly developed glass polyphosphonate cement, Diamond Carve (DC). METHOD:Disc specimens (10 mm diameter, 1 mm thick) were prepared and mo...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/s0300-5712(98)00061-x
更新日期:1999-07-01 00:00:00