Color stability of silorane-based composites submitted to accelerated artificial ageing--an in situ study.

Abstract:

OBJECTIVES:To assess the in situ color stability, surface and the tooth/restoration interface degradation of a silorane-based composite (P90, 3M ESPE) after accelerated artificial ageing (AAA), in comparison with other dimethacrylate monomer-based composites (Z250/Z350, 3M ESPE and Esthet-X, Dentsply). METHODS:Class V cavities (25 mm(2) × 2 mm deep) were prepared in 48 bovine incisors, which were randomly allocated into 4 groups of 12 specimens each, according to the type of restorative material used. After polishing, 10 specimens were submitted to initial color readings (Easyshade, Vita) and 2 to analysis by scanning electronic microscopy (SEM). Afterwards, the teeth were submitted to AAA for 384 h, which corresponds to 1 year of clinical use, after which new color readings and microscopic images were obtained. The values obtained for the color analysis were submitted to statistical analysis (1-way ANOVA, Tukey, p<0.05). RESULTS:With regard to color stability, it was verified that all the composites showed color alteration above the clinically acceptable levels (ΔE ≥ 3.3), and that the silorane-based composite showed higher ΔE (18.6), with a statistically significant difference in comparison with the other composites (p<0.05). The SEM images showed small alterations for the dimethacrylate-based composites after AAA and extensive degradation for the silorane-based composite with a rupture at the interface between the matrix/particle. CONCLUSION:It may be concluded that the silorane-based composite underwent greater alteration with regard to color stability and greater surface and tooth/restoration interface degradation after AAA.

journal_name

J Dent

journal_title

Journal of dentistry

authors

Pires-de-Souza Fde C,Garcia Lda F,Roselino Lde M,Naves LZ

doi

10.1016/j.jdent.2011.03.003

subject

Has Abstract

pub_date

2011-07-01 00:00:00

pages

e18-24

eissn

0300-5712

issn

1879-176X

pii

S0300-5712(11)00069-8

journal_volume

39 Suppl 1

pub_type

杂志文章
  • Antibacterial efficacy of an endodontic sonic-powered irrigation system: An in vitro study.

    abstract:OBJECTIVE:To evaluate the efficacy of EDDY, a new sonic-powered irrigation system, in reducing intracanal bacteria load. METHODS:Thirty-eight instrumented, autoclaved single-rooted human premolars were inoculated with Enterococcus faecalis (ATCC-29212) for 21 days. Two teeth were used as negative control without bacte...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2018.06.003

    authors: Zeng C,Willison J,Meghil MM,Bergeron BE,Cutler CW,Tay FR,Niu L,Ma J

    更新日期:2018-08-01 00:00:00

  • Can the durability of one-step self-etch adhesives be improved by double application or by an extra layer of hydrophobic resin?

    abstract:OBJECTIVES:This study evaluated the immediate and 6-month resin-dentin micro-bond strength (microTBS) of one-step self-etch systems (Adper Prompt L-Pop [AD] 3M ESPE; Xeno III [XE] Dentsply De Trey; iBond [iB] Heraeus Kulzer) under different application modes. MATERIALS AND METHODS:Dentin oclusal surfaces were exposed ...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2008.01.018

    authors: Reis A,Albuquerque M,Pegoraro M,Mattei G,Bauer JR,Grande RH,Klein-Junior CA,Baumhardt-Neto R,Loguercio AD

    更新日期:2008-05-01 00:00:00

  • An in vitro investigation of the effect and retention of bioactive glass air-abrasive on sound and carious dentine.

    abstract:OBJECTIVES:To examine the removal rate of sound and carious dentine using bioactive glass air-abrasion and investigate abrasive particle retention of alumina and bioactive glass on abraded dentine. METHODS:Crushed bioactive glass was investigated as an alternative air-abrasive to alumina at air pressures of 138, 413 a...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2007.12.004

    authors: Paolinelis G,Banerjee A,Watson TF

    更新日期:2008-03-01 00:00:00

  • Determination of doughing and manipulation times of acrylic resin denture base material and a proposal for a specification for a packing plasticity test.

    abstract::The doughing and manipulation times of a range of acrylic resin denture base polymers are presented in this study. The methods evaluated were: (i) probing following American Society for testing materials specification, F451-76; (ii) hole penetration following British Standard, 2487: 1989 and International Standard Org...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/0300-5712(92)90057-j

    authors: Mutlu G,Huggett R,Harrison A

    更新日期:1992-10-01 00:00:00

  • Effect of surface treatments on the tensile bond strength of repaired water-aged anterior restorative micro-fine hybrid resin composite.

    abstract:OBJECTIVES:The purpose of this study was to characterize changes in surface topography associated with different surface treatments and their effect on tensile bond strength (TBS) of repaired water-aged anterior restorative micro-fine hybrid resin composite. METHODS:The TBS of repaired resin-based composite slabs eith...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2008.07.014

    authors: Fawzy AS,El-Askary FS,Amer MA

    更新日期:2008-12-01 00:00:00

  • All-ceramic partial coverage restorations--midterm results of a 5-year prospective clinical splitmouth study.

    abstract:OBJECTIVES:Midterm-evaluation of a 5-year prospective clinical splitmouth-investigation on survival rate and long-term behavior of all-ceramic partial coverage restorations (PCRs) on molars. Pressed ceramic and CAD/CAM fabricated PCRs were compared. METHODS:80 vital molars of 25 patients were restored with all-ceramic...

    journal_title:Journal of dentistry

    pub_type: 临床试验,杂志文章

    doi:10.1016/j.jdent.2009.04.006

    authors: Guess PC,Strub JR,Steinhart N,Wolkewitz M,Stappert CF

    更新日期:2009-08-01 00:00:00

  • Adhesion mechanisms at the interface between Y-TZP and veneering ceramic with and without modifier.

    abstract:OBJECTIVE:This study investigated the mechanism of action at the interface between a commercially available Y-TZP and its veneering ceramic after final firing. Particular attention was paid, from a microstructural point of view, to evaluating the effects of different surface treatments carried out on the zirconia. MET...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2014.07.019

    authors: Monaco C,Tucci A,Esposito L,Scotti R

    更新日期:2014-11-01 00:00:00

  • Randomized controlled trial comparing glass fiber posts and cast metal posts.

    abstract:OBJECTIVE:This study aimed to assess the survival and success of glass fiber posts compared to cast metal posts in teeth without ferrule. MATERIAL AND METHODS:An equivalency, prospective, double-blind (patient and outcome evaluator) randomized controlled trial (RCT) with parallel groups was designed to compare the cli...

    journal_title:Journal of dentistry

    pub_type: 杂志文章,随机对照试验

    doi:10.1016/j.jdent.2020.103334

    authors: Sarkis-Onofre R,Amaral Pinheiro H,Poletto-Neto V,Bergoli CD,Cenci MS,Pereira-Cenci T

    更新日期:2020-05-01 00:00:00

  • Penetration of sub-micron particles into dentinal tubules using ultrasonic cavitation.

    abstract:OBJECTIVES:Functionalised silica sub-micron particles are being investigated as a method of delivering antimicrobials and remineralisation agents into dentinal tubules. However, their methods of application are not optimised, resulting in shallow penetration and aggregation. The aim of this study is to investigate the ...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2016.11.006

    authors: Vyas N,Sammons RL,Pikramenou Z,Palin WM,Dehghani H,Walmsley AD

    更新日期:2017-01-01 00:00:00

  • Self-perceived changes in oral health-related quality of life after receiving different types of conventional prosthetic treatments: a cohort follow-up study.

    abstract:OBJECTIVES:To evaluate the changes in oral health-related quality of life (OHRQoL) reported by subjects treated with conventional prostheses. METHODS:A consecutive sample of 153 patients seeking prosthodontic rehabilitation was recruited. Socio-demographic and prosthetic-related factors (Eichner Index; number of occlu...

    journal_title:Journal of dentistry

    pub_type: 临床试验,杂志文章

    doi:10.1016/j.jdent.2013.01.006

    authors: Montero J,Castillo-Oyagüe R,Lynch CD,Albaladejo A,Castaño A

    更新日期:2013-06-01 00:00:00

  • Acupuncture for treating temporomandibular joint disorders: a systematic review and meta-analysis of randomized, sham-controlled trials.

    abstract:OBJECTIVE:The aim of this article was to assess the clinical evidence for or against acupuncture and acupuncture-like therapies as treatments for temporomandibular joint disorder (TMD). DATA:This systematic review includes randomized clinical trials (RCTs) of acupuncture as a treatment for TMD compared to sham acupunc...

    journal_title:Journal of dentistry

    pub_type: 杂志文章,meta分析,评审

    doi:10.1016/j.jdent.2011.02.006

    authors: Jung A,Shin BC,Lee MS,Sim H,Ernst E

    更新日期:2011-05-01 00:00:00

  • Impact of light transmittance mode on polymerisation kinetics in bulk-fill resin-based composites.

    abstract:OBJECTIVES:to determine the mode of light transmission and its impact on the polymerisation kinetic in modern bulk-fill resin-based composites (B-RBC). MATERIALS AND METHODS:Four low-viscosity methacrylate-based and one high-viscosity ormocer-based B-RBCs were considered. One material was available in three different ...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2017.05.017

    authors: Ilie N

    更新日期:2017-08-01 00:00:00

  • Liposomes loaded with transforming growth factor β1 promote odontogenic differentiation of dental pulp stem cells.

    abstract:OBJECTIVES:This study investigated whether novel liposome formulations loaded with transforming growth factor β1 (TGF-β1) could promote the odontogenic differentiation of human dental pulp stem cells (hDPSCs) for dentine-pulp regeneration. METHODS:0-100 ng/mL of liposomal TGF-β1 was prepared using the thin-film hydrat...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2020.103501

    authors: Jiang L,Ayre WN,Melling GE,Song B,Wei X,Sloan AJ,Chen X

    更新日期:2020-12-01 00:00:00

  • Influence of water storage on fatigue strength of self-etch adhesives.

    abstract:OBJECTIVES:The purpose of this study was to determine enamel and dentin bond durability after long-term water storage using self-etch adhesives. METHODS:Two single step self-etch adhesives (SU, Scotchbond Universal and GB, G-ӕnial Bond) and a two-step self-etch adhesive (OX, OptiBond XTR) were used. The shear bond str...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2015.10.018

    authors: Takamizawa T,Barkmeier WW,Tsujimoto A,Scheidel DD,Watanabe H,Erickson RL,Latta MA,Miyazaki M

    更新日期:2015-12-01 00:00:00

  • Longitudinal monitoring of demineralization peripheral to orthodontic brackets using cross polarization optical coherence tomography.

    abstract:OBJECTIVES:The aim of this study was to test the hypothesis that cross-polarization optical coherence tomography (CP-OCT) can be used to longitudinally monitor demineralization peripheral to orthodontic brackets in an extended clinical study. METHODS:A high-speed CP-OCT system was used to acquire 3D volumetric images ...

    journal_title:Journal of dentistry

    pub_type: 杂志文章,随机对照试验

    doi:10.1016/j.jdent.2014.02.011

    authors: Nee A,Chan K,Kang H,Staninec M,Darling CL,Fried D

    更新日期:2014-05-01 00:00:00

  • The remineralisation of enamel: a review of the literature.

    abstract:OBJECTIVE:The purpose of this paper is to review current knowledge and technologies for tooth remineralisation. DATA SOURCES:The literature was searched using the "Scopus" and "Web of Knowledge" database from the year 1971, with principal key words of *miner*, teeth and enamel. Language was restricted to English. Orig...

    journal_title:Journal of dentistry

    pub_type: 杂志文章,评审

    doi:10.1016/S0300-5712(14)50003-6

    authors: Li X,Wang J,Joiner A,Chang J

    更新日期:2014-06-01 00:00:00

  • Comparison of remineralization effect of three topical fluoride regimens on enamel initial carious lesions.

    abstract:OBJECTIVES:Some studies have been conducted to evaluate the effect of different topical fluoride regimens on the remineralization of initial carious lesions. This study was conducted to compare the effects of 3 topical fluoride treatments on the surface microhardness, fluoride uptake, and fluorescence lesion area in en...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2009.10.002

    authors: Lee YE,Baek HJ,Choi YH,Jeong SH,Park YD,Song KB

    更新日期:2010-02-01 00:00:00

  • A radiographic investigation into bone resorption of mandibular alveolar bone in elderly edentulous adults.

    abstract::Clinical experience suggests that severe alveolar bone resorption can limit the success of complete denture wearing. The loss of bone mineral with age occurs throughout the skeleton, which contributes to the high incidence of bone fractures later in life. Women are more commonly affected by some of these fractures. Th...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/0300-5712(89)90141-3

    authors: Humphries S,Devlin H,Worthington H

    更新日期:1989-04-01 00:00:00

  • The effect of saliva substitutes on enamel erosion in vitro.

    abstract:OBJECTIVES:To investigate the effect of saliva substitutes on enamel erosion in vitro. METHODS:A total of 204 bovine enamel samples were embedded in acrylic resin and allocated to 17 groups (n=12). The specimens were eroded in an artificial mouth (3 days; 6×30 s/days, flow rate: 2 ml/min) using citric acid (pH: 2.5). ...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2014.03.012

    authors: Aykut-Yetkiner A,Wiegand A,Attin T

    更新日期:2014-06-01 00:00:00

  • Clinical behaviour of glass ionomer restorations in primary teeth.

    abstract:OBJECTIVE:To compare a silver-reinforced glass ionomer material (cermet) with a resin-modified glass ionomer in minimal Class II preparations in primary teeth. METHODS:Matched pairs of primary molars with approximal caries that required operative treatment were used. Each cavity was filled with either Vitremer or Keta...

    journal_title:Journal of dentistry

    pub_type: 临床试验,杂志文章,随机对照试验

    doi:10.1016/s0300-5712(99)00004-4

    authors: Espelid I,Tveit AB,Tornes KH,Alvheim H

    更新日期:1999-08-01 00:00:00

  • Dentists clinical decision-making for erosive tooth wear: An online pilot study.

    abstract:OBJECTIVE:Erosive tooth wear (ETW) is an irreversible loss of dental hard tissue. This pilot study examined dentists' ability to diagnose and manage ETW relative to sound and caries-affected teeth. METHODS:Dentists recruited through the Indiana Dental Association (N = 36) participated in an internet-based survey, cont...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2020.103424

    authors: Goldfarb MB,Maupomé G,Hirsh AT,Carvalho JC,Eckert GJ,Hara AT

    更新日期:2020-09-01 00:00:00

  • Experimental research on the relationship between fit accuracy and fracture resistance of zirconia abutments.

    abstract:OBJECTIVES:The purpose of the study was to investigate the correlation between fit accuracy and fracture resistance of zirconia abutments, as well as its feasibility for clinical applications. METHODS:Twenty self-made zirconia abutments were tested with 30 Osstem GSII implants. First, 10 Osstem GSII implants were cut ...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2014.02.008

    authors: Sui X,Wei H,Wang D,Han Y,Deng J,Wang Y,Wang J,Yang J

    更新日期:2014-10-01 00:00:00

  • Pre-heating of high-viscosity bulk-fill resin composites: effects on shrinkage force and monomer conversion.

    abstract:OBJECTIVES:To investigate the influence of pre-heating of high-viscosity bulk-fill composite materials on their degree of conversion and shrinkage force formation. METHODS:Four bulk-fill composite materials (Tetric EvoCeram Bulk Fill-TECBF, x-tra fil-XF, QuixFil-QF, SonicFill-SF) and one conventional nano-hybrid resin...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2015.07.014

    authors: Tauböck TT,Tarle Z,Marovic D,Attin T

    更新日期:2015-11-01 00:00:00

  • Incisal coverage or not in ceramic laminate veneers: A systematic review and meta-analysis.

    abstract:BACKGROUND:There is no consensus on whether incisal coverage is a risk or a protective factor in preparations for ceramic veneers. OBJECTIVE:The aim of this systematic review and meta-analysis was to evaluate the survival rates of preparation designs for ceramic veneers with and without incisal coverage. METHODS:Prim...

    journal_title:Journal of dentistry

    pub_type: 杂志文章,meta分析,评审

    doi:10.1016/j.jdent.2016.06.004

    authors: Albanesi RB,Pigozzo MN,Sesma N,Laganá DC,Morimoto S

    更新日期:2016-09-01 00:00:00

  • Rechargeable dental adhesive with calcium phosphate nanoparticles for long-term ion release.

    abstract:OBJECTIVES:The tooth-resin bond is the weak link of restoration, with secondary caries as a main reason for failure. Calcium phosphate-containing resins are promising for remineralization; however, calcium (Ca) and phosphate (P) ion releases last only a couple of months. The objectives of this study were to develop the...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2015.06.009

    authors: Zhang L,Weir MD,Hack G,Fouad AF,Xu HH

    更新日期:2015-12-01 00:00:00

  • Surface roughness of oral mucosa and its reproduction in dental materials.

    abstract::An even fitting surface is essential to obtain and maintain a healthy oral mucosa in denture wearers. The present study was designed to clarify the relationship between the surface roughness of oral mucosa and its reproduction in the corresponding fitting surface of acrylic dentures. A silicone elastomer/epoxy replica...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/0300-5712(94)90201-1

    authors: Ravnholt G,Kaaber S

    更新日期:1994-06-01 00:00:00

  • Quantification of dental plaque in the research environment.

    abstract:OBJECTIVES:To review the established and novel methods of plaque quantification employed in dental research, including a discussion of their merits and to present a new method of planimetrically measuring plaque using light induced fluorescence. METHOD:Quantitative light-fluorescence (QLF) images were acquired from th...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2004.10.017

    authors: Pretty IA,Edgar WM,Smith PW,Higham SM

    更新日期:2005-03-01 00:00:00

  • Repair may increase survival of direct posterior restorations - A practice based study.

    abstract:OBJECTIVES:To investigate repairs of direct restorations by a group of Dutch general dental practitioners (GDPs) and its consequences on longevity of restorations. METHODS:Data set was based on dental records of patients attending 11 general dental practices (24 Dentists) in the Netherlands. Patients that received Cla...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2017.06.002

    authors: Casagrande L,Laske M,Bronkhorst EM,Huysmans MCDNJM,Opdam NJM

    更新日期:2017-09-01 00:00:00

  • The effect of dentine surface preparation and reduced application time of adhesive on bonding strength.

    abstract:OBJECTIVE:This study evaluated the effects of surface preparation and the application time of adhesives on the resin-dentine bond strengths with universal adhesives. METHODS:Sixty molars were cut to exposed mid-coronal dentine and divided into 12 groups (n=5) based on three factors; (1) adhesive: G-Premio Bond (GP, GC...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2016.02.001

    authors: Saikaew P,Chowdhury AF,Fukuyama M,Kakuda S,Carvalho RM,Sano H

    更新日期:2016-04-01 00:00:00

  • Impregnation with antimicrobials challenge bonding properties and water sorption behaviour of an acrylic liner.

    abstract:OBJECTIVES:To investigate the effect of impregnation of poly(ethyl methacrylate) and tetrahydro-furfuryl methacrylate (PEM/THFM) polymeric delivery system with chlorhexidine or fluconazole on its shear bond strength (SBS) and water sorption. METHODS:For SBS testing, 16 PEM/THFM discs impregnated with chlorhexidine (CH...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2012.04.027

    authors: Salim N,Satterthwaite JD,Rautemaa R,Silikas N

    更新日期:2012-08-01 00:00:00