Interfacial degradation of adhesive composite restorations mediated by oral biofilms and mechanical challenge in an extracted tooth model of secondary caries.

Abstract:

OBJECTIVE:To study the combined effect of simulated occlusal loading and plaque-derived biofilm on the interfacial integrity of dental composite restorations, and to explore whether the effects are modulated by the incorporation of sucrose. METHODS:MOD-class-II restorations were prepared in third molars. Half of the specimens (n=27) were subjected to 200,000 cycles of mechanical loading using an artificial oral environment (ART). Then, both groups of specimens (fatigued and non-fatigued) were divided into three subgroups for testing in CDC-reactors under the following conditions: no biofilm (Control), biofilm with no sucrose (BNS) and biofilm pulsed with sucrose (BWS). BNS and BWS reactors were incubated with a multispecies inoculum from a single plaque donor whereas the control reactor was not. The BWS reactor was pulsed with sucrose five times a day. The biofilm challenges were repeated sequentially for 12 weeks. pH was recorded for each run. Specimens were examined for demineralization with micro-CT and load capacity by fast fracture test. RESULTS:Demineralization next to the restorations was only detectable in BWS teeth. Fracture loads were significantly reduced by the concomitant presence of biofilm and sucrose, regardless of whether cyclic mechanical loading was applied. Cyclic loading reduced fracture loads under all reactor conditions, but the reduction was not statistically significant. CONCLUSIONS:Sucrose pulsing was required to induce biofilm-mediated degradation of the adhesive interface. We have presented a comprehensive and clinically relevant model to study the effects of mechanical loading and microbial challenge on the interfacial integrity of dental restorations.

journal_name

J Dent

journal_title

Journal of dentistry

authors

Carrera CA,Li Y,Chen R,Aparicio C,Fok A,Rudney J

doi

10.1016/j.jdent.2017.08.009

subject

Has Abstract

pub_date

2017-11-01 00:00:00

pages

62-70

eissn

0300-5712

issn

1879-176X

pii

S0300-5712(17)30205-1

journal_volume

66

pub_type

杂志文章
  • Cavity lining after excavating caries lesions: meta-analysis and trial sequential analysis of randomized clinical trials.

    abstract:OBJECTIVES:After removal of dentine caries lesions, cavity lining has been advocated. Non-clinical data support this approach, but clinical data are sparse and ambiguous. We aimed at evaluating the benefits and harms of cavity lining using meta-analysis and Trial Sequential Analysis. DATA:We included randomized clinic...

    journal_title:Journal of dentistry

    pub_type: 杂志文章,评审

    doi:10.1016/j.jdent.2015.07.017

    authors: Schwendicke F,Göstemeyer G,Gluud C

    更新日期:2015-11-01 00:00:00

  • Can the durability of one-step self-etch adhesives be improved by double application or by an extra layer of hydrophobic resin?

    abstract:OBJECTIVES:This study evaluated the immediate and 6-month resin-dentin micro-bond strength (microTBS) of one-step self-etch systems (Adper Prompt L-Pop [AD] 3M ESPE; Xeno III [XE] Dentsply De Trey; iBond [iB] Heraeus Kulzer) under different application modes. MATERIALS AND METHODS:Dentin oclusal surfaces were exposed ...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2008.01.018

    authors: Reis A,Albuquerque M,Pegoraro M,Mattei G,Bauer JR,Grande RH,Klein-Junior CA,Baumhardt-Neto R,Loguercio AD

    更新日期:2008-05-01 00:00:00

  • Particle versus mercury removal efficiency of amalgam separators.

    abstract:OBJECTIVE:The intent of this project was to evaluate the efficiency of three commercial amalgam separators based on mercury and particle removal. METHODS:Dental wastewater samples were collected from a 54-chair dental clinic and a one chair private dental office. Atomic absorption spectrometry was used to measure merc...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/s0300-5712(02)00067-2

    authors: Drummond JL,Liu Y,Wu TY,Cailas MD

    更新日期:2003-01-01 00:00:00

  • Accuracy and precision of 3 intraoral scanners and accuracy of conventional impressions: A novel in vivo analysis method.

    abstract:OBJECTIVE:To evaluate a novel methodology using industrial scanners as a reference, and assess in vivo accuracy of 3 intraoral scanners (IOS) and conventional impressions. Further, to evaluate IOS precision in vivo. METHODS:Four reference-bodies were bonded to the buccal surfaces of upper premolars and incisors in fiv...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2017.12.006

    authors: Nedelcu R,Olsson P,Nyström I,Rydén J,Thor A

    更新日期:2018-02-01 00:00:00

  • Lifetime comparison of Y-TZP/porcelain crowns under different loading conditions.

    abstract:OBJECTIVES:To compare the lifetime of Y-TZP/porcelain crowns under three different load conditions using step-stress accelerated lifetime testing. METHODS:The Y-TZP frameworks were milled using CAD/CAM, veneered with a porcelain and cemented onto dentine analogue dies. Specimens were divided according to the occlusal ...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2015.01.012

    authors: Corazza PH,Duan Y,Kimpara ET,Griggs JA,Della Bona A

    更新日期:2015-04-01 00:00:00

  • Prospective evaluation of zirconia based tooth- and implant-supported fixed dental prostheses: 3-year results.

    abstract:OBJECTIVES:This prospective clinical study compared the performance of implant-retained (study group) and tooth-retained (control) zirconia based fixed dental prostheses (FDPs) with at least 4 units. The null-hypothesis stated that complication rates in both groups are equally distributed. METHODS:The study included p...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2014.10.011

    authors: Konstantinidis IK,Jacoby S,Rädel M,Böning K

    更新日期:2015-01-01 00:00:00

  • In-vitro apatite formation capacity of a bioactive glass - containing toothpaste.

    abstract:OBJECTIVES:The in-vitro dissolution of bioactive glass-based toothpastes and their capacity to form apatite-like phases in buffer solutions have been investigated. MATERIALS AND METHODS:The commercial toothpaste samples were tested on immersion in artificial saliva, Earle's salt solution and Tris buffer for duration f...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2017.10.015

    authors: Kanwal N,Brauer DS,Earl J,Wilson RM,Karpukhina N,Hill RG

    更新日期:2018-01-01 00:00:00

  • Surface characterization of dental Y-TZP ceramic after air abrasion treatment.

    abstract:OBJECTIVE:The aim of this study was to characterize the surface of Y-TZP after abrasion with various airborne particles. METHODS:The Y-TZP blanks were cut into 44 discs and sintered according to the manufacturer's instructions. The specimens were treated as follows: (a) control specimens, (b) abraded with 50μm alumina...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2012.05.003

    authors: Hallmann L,Ulmer P,Reusser E,Hämmerle CH

    更新日期:2012-09-01 00:00:00

  • Interpretation of bitewing radiographs. Part 1. Evaluation of the presence of approximal lesions.

    abstract:OBJECTIVE:Bitewing radiographs are the main tool for approximal caries detection. However, interpretation of findings is affected by numerous factors, such as beam angulation, exposure conditions, morphologic variations, etc. The objective of the present study was to compare the ability to detect virtually identical, a...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/0300-5712(95)00111-5

    authors: Eli I,Weiss EI,Tzohar A,Littner MM,Gelernter I,Kaffe I

    更新日期:1996-11-01 00:00:00

  • Cross-infection control: the role of "in-training" dental nurses.

    abstract:OBJECTIVES:This paper reports the findings of a study on the roles of dental nurses in cross-infection control in general dental practices and who were undergoing training for their initial certificate. The research aimed to find out what factors in their vocation gave them satisfaction, what caused stress and the bear...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/0300-5712(95)00094-1

    authors: Sarll DW,Jones JH,Ashton MA

    更新日期:1996-09-01 00:00:00

  • Acidogenic potential of soy and bovine milk beverages.

    abstract:UNLABELLED:Soy beverages are water extracts of whole soybeans and are often promoted as a healthy alternative to bovine milk. Little analysis has been carried out to determine the effects of soy beverages on oral health, especially their potential acidogenicity. OBJECTIVES:The aim of this study was to determine the po...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2012.05.004

    authors: Dashper SG,Saion BN,Stacey MA,Manton DJ,Cochrane NJ,Stanton DP,Yuan Y,Reynolds EC

    更新日期:2012-09-01 00:00:00

  • Degradation resistance of ormocer- and dimethacrylate-based matrices with different filler contents.

    abstract:OBJECTIVES:To investigate the influence of matrix and filler content on degradation resistance of an experimental pure-ormocer and an dimethacrylate-based composite derived from a commercially available material. MATERIALS AND METHODS:A dimethacrylate- Grandio (GR) and a model pure ormocer-based-matrix ORMOCER (ORM) w...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2011.10.012

    authors: Cavalcante LM,Schneider LF,Hammad M,Watts DC,Silikas N

    更新日期:2012-01-01 00:00:00

  • Regional bond strengths of resins to human root dentine.

    abstract:OBJECTIVES:The demand for restoration of root dentine defects such as cervical erosion and root caries has significantly increased recently, but there is limited information on the performance of the adhesive resins to radicular dentine. The purpose of this study was to measure the regional tensile bond strength (TBS) ...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/0300-5712(95)00102-6

    authors: Yoshiyama M,Carvalho RM,Sano H,Horner JA,Brewer PD,Pashley DH

    更新日期:1996-11-01 00:00:00

  • Mapping intraoral photographs on virtual teeth model.

    abstract:OBJECTIVES:Tooth shade is crucial to patient satisfaction in aesthetic dentistry. Two-dimensional (2D) clinical photographs have been widely used to record patients' tooth shade for creation of beautiful smile. However, in the digital workflow, 3D virtual teeth models in open file format contain only mesh information w...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2018.09.009

    authors: Lam WYH,Hsung RTC,Cheng LYY,Pow EHN

    更新日期:2018-12-01 00:00:00

  • Effect of compounds of Galla chinensis on remineralisation of initial enamel carious lesions in vitro.

    abstract:OBJECTIVE:To evaluate the effect of compounds of Galla chinensis on the remineralisation of initial enamel carious lesions in vitro. METHODS:Sixty bovine enamel blocks with early lesions were prepared and randomly divided into six treatment groups. The lesions were subjected to a pH-cycling regime for 12 days. Each da...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2006.11.007

    authors: Chu JP,Li JY,Hao YQ,Zhou XD

    更新日期:2007-05-01 00:00:00

  • Three-dimensional evaluation of gap formation of cervical restorations.

    abstract:OBJECTIVES:In some studies gap formation has been evaluated in just one section of the restorative. This in vitro study aimed to design a quantitative three-dimensional method for evaluation of the contraction gap in restoratives. METHODS:Cervical cavities were prepared on buccal, palatal or lingual surfaces in human ...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2004.10.001

    authors: Iwami Y,Shimizu A,Hayashi M,Takeshige F,Ebisu S

    更新日期:2005-04-01 00:00:00

  • Single-use plaque removal efficacy of three power toothbrushes.

    abstract::OBJECTIVES.: To compare the safety and plaque removal efficacy of two oscillating/rotating/pulsating toothbrushes (Oral-B ProfessionalCaretrade mark 7000 [PC 7000] and Oral-B 3D Excel [3DE]) and a high-frequency toothbrush (Sonicare(R) Advance, Philips Oral Healthcare; SA) in a single-use, examiner-blind, three period...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:

    authors: Sharma NC,Goyal CR,Qaqish JG,Cugini MA,Thompson MC,Warren PR

    更新日期:2005-06-01 00:00:00

  • An analysis of satisfaction with complete immediate (over)dentures.

    abstract:OBJECTIVES:The purpose of the study was to investigate denture satisfaction related to treatment modality, age, gender, denture quality, chewing ability, denture experience and patients' attitude towards denture wearing. METHODS:In a randomized controlled clinical trial 74 patients who required immediate denture thera...

    journal_title:Journal of dentistry

    pub_type: 临床试验,杂志文章,随机对照试验

    doi:10.1016/s0300-5712(96)00012-7

    authors: Jonkman RE,van Waas MA,van 't Hof MA,Kalk W

    更新日期:1997-03-01 00:00:00

  • Biological, mechanical and adhesive properties of universal adhesives containing zinc and copper nanoparticles.

    abstract:OBJECTIVES:To evaluate the effect of addition of zinc oxide and copper nanoparticles (ZnO/CuNp) into universal adhesives, on antimicrobial activity (AMA), cytotoxicity (CTX), water sorption (WS) and solubility (SO), microhardness (MH) and in vitro degree of conversion (DC), as well as resin-dentin microtensile bond str...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2019.01.012

    authors: Gutiérrez MF,Alegría-Acevedo LF,Méndez-Bauer L,Bermudez J,Dávila-Sánchez A,Buvinic S,Hernández-Moya N,Reis A,Loguercio AD,Farago PV,Martin J,Fernández E

    更新日期:2019-03-01 00:00:00

  • Compressive and flexural behaviour of fibre reinforced endodontic posts.

    abstract:OBJECTIVES:The aim of this study was to investigate the mechanical properties of five types of fibre-reinforced composite (FRC) posts and compare them with traditional metal post. METHODS:Five FRC posts and a metallic post having different geometry and type of fibre (glass, carbon or quartz fibre) were loaded to failu...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2012.08.003

    authors: Chieruzzi M,Pagano S,Pennacchi M,Lombardo G,D'Errico P,Kenny JM

    更新日期:2012-11-01 00:00:00

  • In vitro caries inhibition by polyacid-modified composite resins ('compomers').

    abstract:OBJECTIVES:The aim of this study was to compare the in-vitro caries inhibition of two polyacid-modified composite resins (PMCRs). METHODS:Three standardized class V cavities were prepared in eight extracted human molar teeth. Two of these cavities in each tooth were restored with Compoglass and Dyract according to man...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/s0300-5712(96)00091-7

    authors: Millar BJ,Abiden F,Nicholson JW

    更新日期:1998-03-01 00:00:00

  • The effect of bleaching, varying the shade or thickness of composite veneers on final colour: an in vitro study.

    abstract:OBJECTIVE:To investigate whether bleaching prior to placement of a composite veneer had an effect on the final shade of the restoration and whether this was affected by the thickness or shade of the veneer. METHODS:Twenty bovine teeth were collected, sectioned and divided into two groups. One group was the non-bleache...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2008.04.004

    authors: Jarad FD,Griffiths CE,Jaffri M,Adeyemi AA,Youngson CC

    更新日期:2008-07-01 00:00:00

  • Increased risk for premolar tooth loss in shortened dental arches.

    abstract:OBJECTIVES:To assess sustainability of shortened dental arches (SDA) by determining time to 'first restorative intervention' of teeth and time to 'tooth loss' and comparing these outcomes with complete dental arches (CDA) and SDA plus removable dental prostheses (RDP). METHODS:Data (follow-up time ranged from 27.4 (SD...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2013.05.013

    authors: Gerritsen AE,Witter DJ,Bronkhorst EM,Creugers NH

    更新日期:2013-08-01 00:00:00

  • Cuspal deflection and microleakage in premolar teeth restored with bulk-fill flowable resin-based composite base materials.

    abstract:OBJECTIVES:To assess the cuspal deflection and cervical microleakage of standardised Class II cavities incrementally filled with a dimethacrylate RBC or bulk-fill flowable RBC bases. METHODS:Twenty-four sound upper premolar teeth with Class II cavities were allocated to three groups (n=8). Restoration of the teeth inv...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2012.02.015

    authors: Moorthy A,Hogg CH,Dowling AH,Grufferty BF,Benetti AR,Fleming GJ

    更新日期:2012-06-01 00:00:00

  • Wear rates of regular and tempered composites.

    abstract:OBJECTIVES:One of the reasons for using composite inlays is that restorations can be tempered. Composites tempered with heat and light have, at least initially, an enhanced degree of cure which, it is claimed, improves their physical properties, including wear resistance. The aim of this study was to compare the wear r...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/0300-5712(95)00120-4

    authors: Wassell RW,McCabe JF,Walls AW

    更新日期:1997-01-01 00:00:00

  • Effects of buccal versus lingual surfaces, enamel conditioning procedures and storage duration on brackets debonding characteristics.

    abstract:OBJECTIVES:To determine the influence of two enamel conditioning techniques on buccal and lingual tooth surfaces at two different times on debonding strength and tooth damage. METHODS:The study included 50 premolars. Buccal and lingual surfaces of 10 teeth were scanned using SEM before (N=4) and after enamel condition...

    journal_title:Journal of dentistry

    pub_type: 临床试验,杂志文章,随机对照试验

    doi:10.1016/j.jdent.2004.08.005

    authors: Brosh T,Strouthou S,Sarne O

    更新日期:2005-02-01 00:00:00

  • The influence of alumina abrasion and cement lute on the strength of a porcelain laminate veneering material.

    abstract:OBJECTIVES:The purpose of the current study was to examine whether alumina abrasion regime influenced the necessary surface roughness conducive to mechanical interlocking prior to composite resin bonding. The impact of alumina abrasion and cement lute on the bi-axial flexure strength and associated Weibull Moduli (m) o...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2003.08.004

    authors: Fleming GJ,Jandu HS,Nolan L,Shaini FJ

    更新日期:2004-01-01 00:00:00

  • Relationship between dentine hydraulic conductance and the cytotoxicity of four dentine bonding resins in vitro.

    abstract:OBJECTIVES:Dentine modifies pulpward diffusion of monomers leaching from restorative materials. Thus, remaining dentine thickness must be taken into account during in vitro cytotoxicity tests. This in vitro study was designed to determine the influence of dentine permeability on the outcome of a cytotoxicity test. MET...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/s0300-5712(98)00019-0

    authors: Abou Hashieh I,Franquin JC,Cosset A,Dejou J,Camps J

    更新日期:1998-07-01 00:00:00

  • The association between erosive toothwear and gastro-oesophageal reflux-related symptoms and disease: A systematic review and meta-analysis.

    abstract:OBJECTIVES:To conduct a systematic review and meta-analysis to explore the association between erosive toothwear and gastro-oesophageal reflux disease or symptoms (GERD/S). SOURCES:Electronic searches were performed in Scopus, Embase, and Web of Science databases for the identification of relevant studies, from 1980 u...

    journal_title:Journal of dentistry

    pub_type: 杂志文章,meta分析

    doi:10.1016/j.jdent.2020.103284

    authors: Jordão HWT,Coleman HG,Kunzmann AT,McKenna G

    更新日期:2020-04-01 00:00:00

  • Alterations of energy metabolism and glutathione levels of HL-60 cells induced by methacrylates present in composite resins.

    abstract:OBJECTIVES:Methacrylic compounds such as 2-hydroxyethyl methacrylate (HEMA), triethylene glycol dimethacrylate (TEGDMA) and bisphenol A glycerolate (1 glycerol/phenol) dimethacrylate (Bis-GMA) are largely present in auto- or photopolymerizable composite resins. Since the polymerization reaction is never complete, these...

    journal_title:Journal of dentistry

    pub_type: 杂志文章

    doi:10.1016/j.jdent.2006.07.008

    authors: Nocca G,De Palma F,Minucci A,De Sole P,Martorana GE,Callà C,Morlacchi C,Gozzo ML,Gambarini G,Chimenti C,Giardina B,Lupi A

    更新日期:2007-03-01 00:00:00