Effect of cyclic loading on the bond strength of class II restorations with different composite materials.

Abstract:

:This study evaluated the effect of cyclic loading on the bond strength of Class II restorations using different composite materials. Class II preparations with gingival margins located in dentin were performed on the mesial surface of 80 bovine incisors. The teeth were randomly allocated to eight groups (n=10) according to resin composite (Filtek Z250, Filtek Supreme, Tetric Ceram HB and Esthet-X) and use of cyclic loading. The restorations were bonded with the Single Bond adhesive system. Simulated aging groups were cyclic loaded for 200,000 cycles with 80N load (2Hz). The specimens were vertically sectioned (two slabs per restoration) and further trimmed into an hour-glass shape at the adhesive interface to obtain a final bonded area 1 mm2. Samples were placed in an apparatus and tested under tension using a universal testing machine. The data were analyzed using two-way ANOVA and Tukey test with a 95% confidence level. Aged groups presented significantly lower means when compared to the groups that were not aged (p=0.03). However, significant differences among composite materials were not observed (p=0.17). Regardless of the restorative composite material used, it could be concluded that the bond strength of Class II restorations at the gingival wall was affected by simulated cyclic loading.

journal_name

Oper Dent

journal_title

Operative dentistry

authors

Cavalcanti AN,Mitsui FH,Silva F,Peris AR,Bedran-Russo A,Marchi GM

doi

10.2341/07-65

subject

Has Abstract

pub_date

2008-03-01 00:00:00

pages

163-8

issue

2

eissn

0361-7734

issn

1559-2863

journal_volume

33

pub_type

杂志文章
  • Tooth regeneration in operative dentistry.

    abstract::For many years, operative dentistry has been using regenerative approaches to treat dental disease. The use of calcium hydroxide to stimulate reparative or reactionary dentin is clearly an example of such a therapeutic strategy. The advent of tissue engineering is allowing dentistry to move forward in the use of regen...

    journal_title:Operative dentistry

    pub_type: 杂志文章,评审

    doi:10.2341/06-000

    authors: Nör JE

    更新日期:2006-11-01 00:00:00

  • Effects of carbamide peroxide on the staining susceptibility of tooth-colored restorative materials.

    abstract::This study investigated the effects of an at-home bleaching gel containing 15% carbamide peroxide on the susceptibility of tooth-colored restorative materials to different staining solutions. The tooth-colored restoratives used in this study were a nano resin composite (Filtek Z350), a packable resin composite (Filtek...

    journal_title:Operative dentistry

    pub_type: 杂志文章,随机对照试验

    doi:10.2341/08-42

    authors: Yu H,Pan X,Lin Y,Li Q,Hussain M,Wang Y

    更新日期:2009-01-01 00:00:00

  • Alternative technique for class V resin composite restorations with minimum finishing/polishing procedures.

    abstract::Class V restorations are a very common occurrence in clinics. Some reasons include an increase in non-carious cervical lesions (NCCL), root caries and the elderly population. Unfortunately, Class V restorations also represent one of the less durable types of restorations and have a high index of loss of retention, mar...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/09-310-TR

    authors: Perez CR

    更新日期:2010-05-01 00:00:00

  • An in vitro comparison of different cementation strategies on the pull-out strength of a glass fiber post.

    abstract:PURPOSE:To evaluate the effect of different strategies for post cementation on the pullout bond strength of a double-tapered glass fiber post cemented into a root canal. MATERIALS AND METHODS:The root canals of 70 single-rooted bovine teeth (16 mm-length) were prepared to 9 mm using the preparation drill of a double-t...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/08-113

    authors: Amaral M,Santini MF,Wandscher V,Amaral R,Valandro LF

    更新日期:2009-07-01 00:00:00

  • Degradation of Computer-aided Design/Computer-aided Manufacturing Composites by Dietary Solvents: An Optical Three-dimensional Surface Analysis.

    abstract:CLINICAL RELEVANCE:Computer-aided design/computer-aided manufacturing (CAD/CAM) composite resins are susceptible to degradation by dietary solvents. Dietary counselling is prudent when placing such CAD/CAM restorations. SUMMARY:This study determined the effect of dietary solvents on the surface roughness (Ra) of direc...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/19-070-L

    authors: Munusamy SM,Yap AU,Ching HL,Yahya NA

    更新日期:2020-07-01 00:00:00

  • Cumulative assessment of factors leading to restorative decisions in an educational environment. A graphical demonstration using an in vitro case.

    abstract::Even though accuracy and inter-examiner variation assessments of borderline restorative items have been previously reported, no attempt has been made to replicate the effect of cumulative, sequential diagnostic and treatment planning decisions. This study assesses the cumulative effect of factors indicating restorativ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Maupomé G

    更新日期:2000-07-01 00:00:00

  • The effect of light curing source on the residual yellowing of resin composites.

    abstract:PURPOSE:This study evaluated the amount of residual yellow in cured resin composites when polymerizing with either a quartz-tungsten-halogen (QTH) or blue light-emitting diode (LED). MATERIAL AND METHODS:Twelve shades (bleaching to conventional shades) of microfill, hybrid and microhybrid resin composite specimens (n ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/06-129

    authors: Brackett MG,Brackett WW,Browning WD,Rueggeberg FA

    更新日期:2007-09-01 00:00:00

  • Retentiveness of metal coping luted to teeth of uremic patients undergoing hemodialysis using five different luting cements.

    abstract:OBJECTIVES:This study aimed to assess the retention of metal copings luted to uremic teeth with five different luting agents. METHODS:A total of 35 sound natural molars was collected from uremic patients and randomly assigned into five groups (n=7). The teeth were prepared for metal copings using diamond tips and wate...

    journal_title:Operative dentistry

    pub_type: 杂志文章,随机对照试验

    doi:10.2341/12-523-LR2

    authors: Ghazy MH,Aboumadina MM,Mahmoud SH

    更新日期:2014-05-01 00:00:00

  • In vivo adhesive interface between resin and dentin.

    abstract::V-shaped cervical cavities prepared in monkey teeth were restored with several dentin bonding systems, and the in vivo resin-dentin interfacial structures were observed under the scanning electron microscope using an argon-ion etching technique. The hybrid layer could be clearly observed; its depth was dependent on th...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Shimada Y,Harnirattisai C,Inokoshi S,Burrow MF,Takatsu T

    更新日期:1995-09-01 00:00:00

  • Impact of Silane-containing Universal Adhesive on the Biaxial Flexural Strength of a Resin Cement/Glass-ceramic System.

    abstract::The aim of this study was to determine whether using a silane-containing universal adhesive as a silane primer in glass-ceramic/resin cement systems affects biaxial flexural strength (BFS) and bonded interface integrity after loading. Glass-ceramic (IPS e.max CAD, Ivoclar/Vivadent, Schaan, Liechtenstein) disc-shaped s...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/17-356-L

    authors: Murillo-Gómez F,Wanderley RB,De Goes MF

    更新日期:2019-03-01 00:00:00

  • In Vitro Biocompatibility of Contemporary Bulk-fill Composites.

    abstract::This study evaluated the biocompatibility of contemporary bulk-fill resin-based composites (RBCs) including PRG (pre-reacted glass ionomer) materials based on the International Organization for Standardization 10993. In addition, the effect of composite thickness on cytotoxicity was also assessed. Two standard composi...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/15-059-L

    authors: Toh WS,Yap AU,Lim SY

    更新日期:2015-11-01 00:00:00

  • Step-cure polymerization: effect of initial light intensity on resin/dentin bond strength in class I cavities.

    abstract::This in vitro study assessed the effect of a step-cure light curing method on resin/dentin bond strength on the buccal wall of Class I cavities in human teeth. Occlusal enamel was removed to expose a flat dentin surface. Twenty four box-shaped cavities (C-factor = 4.5) were prepared in dentin. Prime&Bond 2.1 was appli...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/05-37

    authors: Santos AJ,Sarmento CF,Abuabara A,Aguiar FH,Lovadino JR

    更新日期:2006-05-01 00:00:00

  • Effect of bleaching on fracture toughness of resin composites.

    abstract::This study determined the effect of bleaching agents on the fracture toughness of composite materials. Four nanofilled resin composites were evaluated: Filtek Supreme Plus, Tetric EvoCeram, Premise and Esthet-X. Four concentrations of bleaching agents were tested: Opalescence PF 10%, 20%, 35% and 45%. Fifty specimens ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/08-120-L

    authors: Cho SD,Bulpakdi P,Matis BA,Platt JA

    更新日期:2009-11-01 00:00:00

  • Enamel Surface Changes After Exposure to Bleaching Gels Containing Carbamide Peroxide or Hydrogen Peroxide.

    abstract:OBJECTIVE:This study evaluated the differences in enamel color change, surface hardness, elastic modulus, and surface roughness between treatments with four bleaching gels containing carbamide peroxide (two at 10% and one each at 35%, and 45%) and two bleaching gels containing hydrogen peroxide (two at 40%). METHODS:E...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/15-010-L

    authors: Cvikl B,Lussi A,Moritz A,Flury S

    更新日期:2016-01-01 00:00:00

  • Novel Microscalpels for Removing Proximal Composite Resin Overhangs on Class II Restorations.

    abstract:INTRODUCTION:Limited access to interdental spaces complicates removal of excess material when placing class II composite resin restorations. Evidence-based recommendations on interproximal finishing are rare. We present novel microscalpels for this indication. The aim of the study was to test their fracture strength an...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/16-012-L

    authors: Wolff D,Schick S,Staehle HJ,Frese C

    更新日期:2017-05-01 00:00:00

  • Rx for caries prevention: time line for home care. A software aid for communication of patient instructions for management of dental caries.

    abstract::Treatment of a caries active patient requires the clinician to be knowledgeable in the restorative and risk management issues with which these patients often present. Modifications of risk factors that promote dental caries play an important part in the long-term restorative success in these patients. Patient complian...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Newitter DA,Meiers JC,Kazemi RB

    更新日期:2002-03-01 00:00:00

  • Online Only Articles.

    abstract::On occasion we receive manuscripts that we would like to publish, but do not have the page room to include in the print journal. For the full article, please go to www.jopdentonline.org or enter the provided address into your address bar. ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/1559-2863-43.3.335

    authors:

    更新日期:2018-05-01 00:00:00

  • Randomized Clinical Trial to Evaluate MTA Indirect Pulp Capping in Deep Caries Lesions After 24-Months.

    abstract:OBJECTIVE:This clinical study aimed to assess the efficacies of mineral trioxide aggregate (MTA) and calcium hydroxide [Ca(OH)2] in the treatment of deep carious lesions by the direct complete caries removal technique. METHODS AND MATERIALS:A total of 100 permanent molar/premolar teeth were capped with either Ca(OH)2 ...

    journal_title:Operative dentistry

    pub_type: 杂志文章,随机对照试验

    doi:10.2341/16-110-C

    authors: Koc Vural U,Kiremitci A,Gokalp S

    更新日期:2017-09-01 00:00:00

  • Microtensile Bond Strength of Composite Cement to Novel CAD/CAM Materials as a Function of Surface Treatment and Aging.

    abstract:OBJECTIVES:To evaluate the effect of different surface treatments on the bond strength to a composite and a polymer-infiltrated ceramic CAD/CAM block after six-month artificial aging. METHODS AND MATERIALS:Two types of CAD/CAM blocks (Cerasmart, GC; Enamic, Vita Zahnfabrik) were cut in slabs of 4-mm thickness, divided...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/15-263-L

    authors: Lise DP,Van Ende A,De Munck J,Vieira L,Baratieri LN,Van Meerbeek B

    更新日期:2017-01-01 00:00:00

  • Effect of fractured or sectioned fragments on the fracture strength of different reattachment techniques.

    abstract::This study evaluated the effect of fractured or sectioned fragments on the fracture strength recovery of four techniques used for reattachment and resin composite buildups. Ninety-one sound, permanent lower central incisors were used. Half the teeth were fractured in the incisal-proximal edge; the other half had the i...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Loguercio AD,Mengarda J,Amaral R,Kraul A,Reis A

    更新日期:2004-05-01 00:00:00

  • Effect of Sonic Resin Composite Delivery on Void Formation Assessed by Micro-computed Tomography.

    abstract:OBJECTIVES:The aim of this study was to quantify the internal void volume formation in commercially available, resin composites inserted using conventional or sonic insertion methods, and analyzed using three-dimensional (3D) micro-computed tomography (μCT). METHODS AND MATERIALS:Four resin composites were evaluated: ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/16-331-L

    authors: Hirata R,Pacheco RR,Caceres E,Janal MN,Romero MF,Giannini M,Coelho PG,Rueggeberg FA

    更新日期:2018-03-01 00:00:00

  • Multidisciplinary approach in the rehabilitation of missing lateral incisors: a new trend in daily practice.

    abstract::This article reports the case of a patient with bilateral hypodontia of the maxillary lateral incisors who was dissatisfied with the outcome of initial orthodontic treatment, highlighting the importance of a multidisciplinary interaction among Restorative Dentistry, Orthodontics, and Implantology to achieve satisfacto...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/11-167-T

    authors: Closs LQ,Reston EG,Tessarollo F,Freitas MP,Broliato G

    更新日期:2012-09-01 00:00:00

  • Fracture toughness of pin-retained class 4 restorations.

    abstract::Standardized class 4 cavities were prepared in bovine incisors and restored with a microfilled composite resin. The composite restorations were retained either by acid etching technique (AET) alone or by acid etching technique in combination with a self-threading retentive pin. Pins covered with a bonding/opaquer coat...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Attin T,Hellwig E,Hilgers RD,Zimmermann U

    更新日期:1994-05-01 00:00:00

  • Effect of Polishing Systems on Surface Roughness and Topography of Monolithic Zirconia.

    abstract::This study evaluated the effect of different chairside polishing systems on the surface roughness and topography of monolithic zirconia. Thirty-five monolithic zirconia specimens (Lava PLUS, 3M ESPE) were fabricated and divided into five groups of seven and polished with the following: Group 1 (WZ)-Dura white stone fo...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/15-064-L

    authors: Goo CL,Yap A,Tan K,Fawzy AS

    更新日期:2016-07-01 00:00:00

  • Effect of light intensity and exposure duration on cure of resin composite.

    abstract::Of the many factors under their control, clinicians can manipulate light-exposure duration but must deal with a set intensity of light emitted from the dental curing unit. This research investigates the interdependence of exposure duration and source intensity on resin cure at various depths within a simulated light-c...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Rueggeberg FA,Caughman WF,Curtis JW Jr

    更新日期:1994-01-01 00:00:00

  • Effect of power density on shrinkage of dental resin materials.

    abstract::This study compares volumetric changes and rates of shrinkage during different stages of polymerization of dental resin composites and compomers exposed to the same total energy by using two different combinations of power density and exposure duration. A hybrid composite and its equivalent flowable and a compomer and...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Oberholzer TG,Pameijer CH,Grobler SR,Rossouw RJ

    更新日期:2003-09-01 00:00:00

  • Lesion Activity Assessment (LAA) in Conjunction With International Caries Detection and Assessment System (ICDAS) for Occlusal Caries Diagnosis in Permanent Teeth.

    abstract:OBJECTIVE:The aim of this study was to investigate the clinical performance and to validate the Lesion Activity Assessment (LAA) in conjunction with the International Caries Detection and Assessment System (ICDAS) for occlusal caries diagnosis in permanent teeth. METHODS:Patients with erupted or partially erupted thir...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/13-332-C

    authors: Cotta F,de Castilho LS,Moreira AN,Paiva SM,Ferreira EF,Ferreira LC,Magalhães CS

    更新日期:2015-09-01 00:00:00

  • Influence of carbamide peroxide on the flexural strength of tooth-colored restorative materials: an in vitro study at different environmental temperatures.

    abstract::The current study investigated the influence of carbamide peroxide on the flexural strength of tooth-colored restorative materials at two environmental temperatures. Seven restorative materials were used, including four resin composites (Filtek Z350, Filtek Z250, Synergy Flow and Filtek P60), a polyacid-modified compo...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/09-139-L

    authors: Yu H,Li Q,Lin Y,Buchalla W,Wang Y

    更新日期:2010-05-01 00:00:00

  • Two-year clinical comparison of a microfilled and a hybrid resin-based composite in non-carious Class V lesions.

    abstract::The purpose of this double-blind clinical trial was to compare the retention rate in noncarious Class V lesions of two resin-based composite restorative materials with contrasting stiffness. Isolation with retraction cord, pressed paper triangles, and cotton rolls was used to closely mimic the procedures generally use...

    journal_title:Operative dentistry

    pub_type: 临床试验,杂志文章,随机对照试验

    doi:

    authors: Browning WD,Brackett WW,Gilpatrick RO

    更新日期:2000-01-01 00:00:00

  • Endodontic Access Effect on Full Contour Zirconia and Lithium Disilicate Failure Resistance.

    abstract:OBJECTIVES:To evaluate the effect of endodontic access on the failure load resistance of both adhesively and conventionally luted, full-contour monolithic yttria-stabilized zirconium dioxide (Y-TZP) and adhesively luted lithium disilicate (LD) crowns cemented on prepared teeth. METHODS AND MATERIALS:Seventy-two human ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/18-231-L

    authors: Mallya J,DuVall N,Brewster J,Roberts H

    更新日期:2020-05-01 00:00:00