Abstract:
:Class V restorations are a very common occurrence in clinics. Some reasons include an increase in non-carious cervical lesions (NCCL), root caries and the elderly population. Unfortunately, Class V restorations also represent one of the less durable types of restorations and have a high index of loss of retention, marginal excess and secondary caries. Some causes for these problems include difficulties in isolation, insertion, contouring, finishing and polishing procedures. This technique demonstrates an alternative isolation and insertion method using photocured gingival barrier in association with a flowable resin and hybrid resin composite to recreate the gingival wall with minimum or no excess.
journal_name
Oper Dentjournal_title
Operative dentistryauthors
Perez CRdoi
10.2341/09-310-TRsubject
Has Abstractpub_date
2010-05-01 00:00:00pages
375-9issue
3eissn
0361-7734issn
1559-2863journal_volume
35pub_type
杂志文章abstract:OBJECTIVE:The purpose of this study was to evaluate the strengthening effect of resin composite, cured by a modified layering protocol, for teeth with simulated coronal fracture and weakened immature roots. METHODS:Fifty maxillary teeth were decoronated and their apices sectioned to standardize the length to 12 mm. Pr...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/12-525L
更新日期:2014-05-01 00:00:00
abstract::This study evaluated the shear bond strength of repairs made with a composite (Herculite/Kerr) when two different surface treatment methods and two new generation bond materials were used. The bonding surfaces were prepared by sanding with 500-grit aluminum oxide sandpaper or air abrading with 25-micron aluminum oxide...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:2003-03-01 00:00:00
abstract::The present in vitro study concerns determination of the pre-cementation gap width of all-ceramic crowns made using an in-office digital-impression technique and subsequent computer-aided design/computer-aided manufacturing (CAD/CAM) production. Two chairside video camera systems were used: the Lava Oral scanner and C...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/12-309-L
更新日期:2014-05-01 00:00:00
abstract:OBJECTIVES:This study was performed to 1) quantify dentists' treatment thresholds for occlusal primary caries; 2) determine if the patient's age affects dentists' decisions to surgically treat these carious lesions; and 3) test the hypothesis that patients', dentists', and practices' characteristics are significantly a...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/13-141-C
更新日期:2014-09-01 00:00:00
abstract::Various core materials with different shades affect the final color of high-translucency monolithic zirconia restorations. The blue core shows the greatest color difference in final zirconia restorations followed by metal, A3 dentin-shade resin core, and white core. ...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/19-238-L
更新日期:2020-12-21 00:00:00
abstract::This study evaluated the biocompatibility of contemporary bulk-fill resin-based composites (RBCs) including PRG (pre-reacted glass ionomer) materials based on the International Organization for Standardization 10993. In addition, the effect of composite thickness on cytotoxicity was also assessed. Two standard composi...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/15-059-L
更新日期:2015-11-01 00:00:00
abstract::On occasion we receive manuscripts that we would like to publish, but do not have the page room to include in the print journal. For the full article, please go to www.jopdentonline.org or enter the provided address into your address bar. ...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/1559-2863-42.6.680
更新日期:2017-11-01 00:00:00
abstract::The aim of this study was to compare five all-in-one bonding agents with respect to microleakage, microtensile bond strength (μTBS), degree of conversion (DC) and the impact of cavity configuration. The materials tested were Adper Easy Bond, Clearfil S3 Bond, iBond, Optibond All-in-One, Xeno IV, and Adper Single Bond ...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/14-185-LR1
更新日期:2015-09-01 00:00:00
abstract:OBJECTIVES:To evaluate the effect of application protocol in resin-enamel microshear bond strength (μSBS), in situ degree of conversion, and etching pattern of three universal adhesive systems. METHODS AND MATERIALS:Sixty-three extracted third molars were sectioned in four parts (buccal, lingual, and proximals) and di...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/15-213-L
更新日期:2016-09-01 00:00:00
abstract::This investigation evaluated the stabilizing effect of glass fiber reinforced posts (FRP) luted with self-adhesive universal cement on the fracture resistance of excessively flared endodontically treated teeth (ETT). Values were compared to teeth with no ferrule, 2 mm ferrule and resin cement for luting with 2 mm ferr...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/05-142
更新日期:2006-11-01 00:00:00
abstract::The purpose of this study was to develop an accurate and reproducible intraoral method of measuring the distance between two teeth, and to conduct a clinical pilot study of the effect of placement of a class 2 posterior resin restoration upon this intertooth dimension. A Kaman Sciences KD-2611 noncontact displacement ...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:1989-10-01 00:00:00
abstract:UNLABELLED:This study evaluated the microtensile bond strength (μ-TBS) of low-shrinkage composites with their corresponding adhesive systems, Filtek Silorane/Silorane adhesive (SIL, 3M ESPE AG, Seefeld, Germany) and Aelite LS/One-Step Plus (AL, BISCO Inc, Schaumburg, IL, USA) in cavities with different C-factors. Filte...
journal_title:Operative dentistry
pub_type: 杂志文章,随机对照试验
doi:10.2341/10-105-L
更新日期:2011-05-01 00:00:00
abstract:OBJECTIVE:To study the interfacial ultra-morphology formed by "all-in-one" self-etch adhesives. METHODS:Forty-nine extracted molars were assigned to one of five all-in-one adhesives: Adper Prompt L-Pop (AP, 3M ESPE); Clearfil S3 Bond (S3, Kuraray); G-Bond (GB, GC America); iBond (iB, Heraeus Kulzer) and Xeno IV (XE, D...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/07-133
更新日期:2008-09-01 00:00:00
abstract::This study examined the effect of different light activation modes for light-cured resin-based composites on the shear bond strength to dentin of two one-bottle adhesives with differing acidity. In this experimental study, a flat middle dentin surface was prepared on 110 extracted sound molars using a 600-grit polish ...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/08-048-L
更新日期:2009-09-01 00:00:00
abstract:PURPOSE:To investigate clinical performance of a low-shrinkage silorane-based composite resin when used for repairing conventional dimethacrylate-based composite restorations. BACKGROUND:Despite the continued development of resin-based materials, polymerization shrinkage and shrinkage stress still require improvement....
journal_title:Operative dentistry
pub_type: 杂志文章,随机对照试验
doi:10.2341/11-121-C
更新日期:2012-09-01 00:00:00
abstract::This study evaluated (1) the effect of known reductions in the output of curing lights on the depth of cure of various resins as determined by hardness measurements, and (2) the ability of the clinician to detect reduced light output by use of an explorer to compare the hardness of the top and bottom surfaces of resin...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:1994-03-01 00:00:00
abstract:OBJECTIVES:Whitening efficacy has been related to hydrogen peroxide (HP) diffusion into tooth structure. However, little information is available relating rheological properties to whitening efficacy. The purpose was to evaluate the whitening efficacy and HP penetration level of a 10% HP gel at three different viscosit...
journal_title:Operative dentistry
pub_type: 杂志文章,随机对照试验
doi:10.2341/17-099-L
更新日期:2018-05-01 00:00:00
abstract::The purpose of this study was to determine if the actual concentration of bleaching agents available in four different countries were the same as the label indicated and within the recommendations of the International Standard on Tooth Whitening. The method recommended for assaying peroxide by the United States Pharma...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/11-367-L
更新日期:2013-05-01 00:00:00
abstract::Bonding to enamel has been shown to provide reliable results, and thus conservative tooth preparations are key to the success of ceramic bonded restorations. The wax-up is the first diagnostic tool available to evaluate discrepancies between current and ideal tooth proportions. The clinician's diagnostic mock-up provi...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/19-051-T
更新日期:2020-05-01 00:00:00
abstract::Even though accuracy and inter-examiner variation assessments of borderline restorative items have been previously reported, no attempt has been made to replicate the effect of cumulative, sequential diagnostic and treatment planning decisions. This study assesses the cumulative effect of factors indicating restorativ...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:2000-07-01 00:00:00
abstract::This study investigated the effectiveness of cure and post-gel shrinkage of three visible light-cured composite resins (In Ten-S [IT], Ivoclar Vivadent; Z100 [ZO], 3M-ESPE; Tetric Ceram [TC], Ivoclar Vivadent) when polymerized with a very high intensity (1296 +/- 2 mW/cm2) halogen light (Astralis 10, Ivoclar Vivadent)...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:2003-07-01 00:00:00
abstract::This study evaluated the effect of two dentin disinfectants (Consepsis, Tubulicid), one aqueous HEMA solution (Aqua Prep), a combination of Aqua Prep and Tubulicid and an air abrasion treatment (50 microns aluminum oxide) on the shear bond strength (SBS) of two acetone-based single bottle adhesives (One Step and Prime...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:2001-11-01 00:00:00
abstract::Marginal adaptation to cylindrical dentin preparations of five commercially available dental composites--Charisma, Estelite, Herculite, Pertac, and Silux Plus--and seven experimental dental composites containing prepolymerized filler was evaluated by measurement of the wall-to-wall polymerization contraction gaps. The...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:1997-11-01 00:00:00
abstract:OBJECTIVES:The aim of this investigation was to test the tensile bond strength (TBS) between different computer-aided-design/manufacturing (CAD/CAM) ceramics after conditioning using different universal adhesive systems and resin composite cement. METHODS AND MATERIALS:Substrates of four CAD/CAM ceramics-1) VITABLOCS ...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/18-017-L
更新日期:2019-07-01 00:00:00
abstract::This in vitro study evaluated the interfacial integrity of Class II resin composite restorations. The influence of a flowable composite and additional enamel etching was also evaluated. Deep, saucer-shaped Class II cavities were prepared in the mesial and distal proximal surfaces of 25 extracted human molars and assig...
journal_title:Operative dentistry
pub_type: 临床试验,杂志文章,随机对照试验
doi:
更新日期:2001-01-01 00:00:00
abstract:PURPOSE:To evaluate the effect of zirconia primers, air-abrasion, and tribochemical surface treatment methods on the shear bond strength between yttria-tetragonal zirconia polycrystal (Y-TZP) ceramic and self-adhesive resin cement. METHODS AND MATERIALS:Y-TZP ceramic surfaces were ground flat with 600-grit silicon car...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/13-149-L
更新日期:2015-01-01 00:00:00
abstract::This study investigated the effects of an at-home bleaching gel containing 15% carbamide peroxide on the susceptibility of tooth-colored restorative materials to different staining solutions. The tooth-colored restoratives used in this study were a nano resin composite (Filtek Z350), a packable resin composite (Filtek...
journal_title:Operative dentistry
pub_type: 杂志文章,随机对照试验
doi:10.2341/08-42
更新日期:2009-01-01 00:00:00
abstract::This study compared the thickness of the hybrid layer formed using Scotchbond Multi-Purpose Plus, Single Bond 2, Prime & Bond 2.1 and Xeno III on a dentin surface prepared with a diamond bur in a high speed handpiece or prepared with an Er:YAG laser used with two parameters of pulse energy (200 and 400 mJ) and two par...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/07-84
更新日期:2008-05-01 00:00:00
abstract:PURPOSE::The purpose of this study was to quantify the relative strength tolerance of 1-day and 30-day amalgam following saturation contamination with water, saliva, blood, and handpiece lubricant oil during condensation. METHODS AND MATERIALS::Valiant PhD XT amalgam was tested with 300 shear-strength (N=15) and 120 c...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/18-091-L
更新日期:2019-03-01 00:00:00
abstract::The clinical performance of light curing resin composites is greatly influenced by the quality of the light-curing unit (LCU). Halogen LCUs are commonly used for curing composite materials. However, they have some drawbacks. The development of new, blue, super bright light emitting diodes (LED LCU) of 470-nm wavelengt...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:2005-01-01 00:00:00