Abstract：
:Thermosensitive polymers poly(N-isopropylacrylamide) (PNIPAM), poly(N-vinylcaprolactam) (PVCL) and PVCL grafted with amphiphilic poly(ethylene oxide) (PEO) chains (PVCL-graft-C11EO42) were prepared and characterized and their putative cytotoxicity was evaluated. The cytotoxicity of these thermosensitive polymers and their monomers was investigated as a function of polymer concentration, incubation time and incubation temperature by using 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) and lactate dehydrogenase (LDH) cytotoxicity tests in Caco-2 and Calu-3 cell cultures. Also, the influence of the chain end functionality on toxicity was examined. Viability (MTT) and cellular damage (LDH) of the cells were shown to be dependent on the surface properties of the polymers, hydrophilicity or hydrophobicity. Hydrophilic PVCL and PVCL-graft-C11EO42 were well tolerated at all polymer concentrations (0.1-10.0 mg/ml) after 3 h of incubation at room temperature and at physiological temperature (37 degrees C). The more hydrophobic PNIPAM induced more clear cellular cytotoxicity at 37 degrees C. The monomers N-isopropylacrylamide and vinylcaprolactam and PEO-macromonomer showed dramatically higher cytotoxicity values with respect to the corresponding polymers. Cell damage was directly dependent on concentration, temperature and incubation time.
journal_name
Biomaterialsjournal_title
Biomaterialsauthors
Vihola H,Laukkanen A,Valtola L,Tenhu H,Hirvonen Jdoi
10.1016/j.biomaterials.2004.09.008keywords:
subject
Has Abstractpub_date
2005-06-01 00:00:00pages
3055-64issue
16eissn
0142-9612issn
1878-5905pii
S0142-9612(04)00805-1journal_volume
26pub_type
杂志文章相关文献
BIOMATERIALS文献大全abstract：:Reconstruction of the genitourinary tract, using engineered urological tissues, requires a mechanically stable biodegradable and biocompatible scaffold and cultured cells. Such engineered autologous tissue would have many clinical implications. In this study a highly porous biodegradable polyesterurethane-foam, DegraP...
journal_title：Biomaterials
pub_type： 杂志文章
doi：10.1016/j.biomaterials.2005.08.026
更新日期：2006-03-01 00:00:00
abstract：:The microstructure of TiTa30 alloys diffusion bonded to a 99.7 wt% Al2O3 ceramic was subdivided into a reaction double layer containing the intermetallic phases TiAl and Ti3Al and the (alpha + beta) Ti microstructure. Excellent fracture toughness data of the TiTa30/Al2O3 joints of about 37 J/m2 were obtained after wel...
journal_title：Biomaterials
pub_type： 杂志文章
doi：10.1016/0142-9612(92)90166-l
更新日期：1992-01-01 00:00:00
abstract：:A glucose biosensor was fabricated with loading of glucose oxidase (GOx) into a new organic-inorganic hybrid nanocomposite. The preparation involves formation of silica network into a Nafion (perfluorosulfonate ionomer) and subsequent loading of polyaniline grafted multiwalled carbon nanotubes (MWNT-g-PANI) onto Nafio...
journal_title：Biomaterials
pub_type： 杂志文章
doi：10.1016/j.biomaterials.2009.07.047
更新日期：2009-10-01 00:00:00
abstract：:Helicobacter pylori (H. pylori) infection is highly prevalent, and has a strong association with various gastric diseases, including gastritis, digestive ulcers, and cancer. H. pylori strains with resistance to existing antibiotics have emerged in the past two decades. Currently, treatment of H. pylori infection (invo...
journal_title：Biomaterials
pub_type： 杂志文章
doi：10.1016/j.biomaterials.2015.05.014
更新日期：2015-08-01 00:00:00
abstract：:We genetically introduced the Fc-binding peptide (FcBP) into the loop of a self-assembled protein cage, ferritin, constituting four-fold symmetry at the surface to use it as a modular delivery nanoplatform. FcBP-presenting ferritin (FcBP-ferritin) formed very stable non-covalent complexes with both human and rabbit Ig...
journal_title：Biomaterials
pub_type： 杂志文章
doi：10.1016/j.biomaterials.2012.03.055
更新日期：2012-07-01 00:00:00
abstract：:This study aimed to assess the biocompatibility of two cordierite ceramics (DF and Cord 1014), with similar chemical composition and different porosity, as a potential support for cell growth in a continuous-flow, solid-bed reactor. The Chinese hamster ovary (CHO) cell line transfected with HBV-DHFR recombinant plasmi...
journal_title：Biomaterials
pub_type： 杂志文章
doi：10.1016/s0142-9612(96)00201-3
更新日期：1997-07-01 00:00:00
abstract：:The genesis of bone and teeth involves highly coordinated processes, which involve multiple cell types and proteins that direct the nucleation and crystallization of inorganic hydroxyapatite (HA). Recent studies have shown that peptides mediate the nucleation process, control HA microstructure or even inhibit HA miner...
journal_title：Biomaterials
pub_type： 杂志文章
doi：10.1016/j.biomaterials.2010.01.012
更新日期：2010-04-01 00:00:00
abstract：:The in vivo cellular microenvironment is regulated by a complex interplay of soluble factors and signaling molecules secreted by cells and it plays a critical role in the growth and development of normal and diseased tissues. In vitro systems that can recapitulate the microenvironment at the cellular level are needed ...
journal_title：Biomaterials
pub_type： 杂志文章
doi：10.1016/j.biomaterials.2011.06.013
更新日期：2011-10-01 00:00:00
abstract：:Hepatocytes derived from human pluripotent stem cells (hPSCs) are promising candidates for cell therapy and drug discovery. However, it remains challenging to efficiently purify hepatocytes from undesired cell types after differentiation and to accurately monitor grafted cells after transplantation. Indocyanine Green ...
journal_title：Biomaterials
pub_type： 杂志文章
doi：10.1016/j.biomaterials.2019.119431
更新日期：2019-11-01 00:00:00
abstract：:The synthesis of poly(lactic acid) through polycondensation of the lactic acid monomer gave weight average molecular weights (Mw) lower than 1.6 x 10(4), whereas ring-opening polymerization of lactides in bulk at 130 degrees C for 72 h using stannous octoate as catalyst in the concentration range from 0.003 to 0.8 wt%...
journal_title：Biomaterials
pub_type： 杂志文章
doi：10.1016/s0142-9612(97)00076-8
更新日期：1997-11-01 00:00:00
abstract：:In-stent restenosis is one of the most serious modes of failure of cardiovascular stent implant. Although drug-eluting stents have been proven to reduce in-stent restenosis, the nonspecific inhibitory effects of anti-proliferative drugs, such as rapamycin, result in delayed re-endothelialization and fatal late stent t...
journal_title：Biomaterials
pub_type： 杂志文章
doi：10.1016/j.biomaterials.2016.11.042
更新日期：2017-02-01 00:00:00
abstract：:The fracture toughness of three polymethacrylate contact lens hydrogel materials was measured using the method of Generalized Fracture Mechanics. One hydrogel (SNOFLEX S68) had a significantly higher fracture energy per unit area (Jc) than the others, probably because it undergoes plastic deformation at high strains. ...
journal_title：Biomaterials
pub_type： 杂志文章
doi：10.1016/0142-9612(90)90095-8
更新日期：1990-08-01 00:00:00
abstract：:Certain types of implanted medical devices depend on oxygen supplied from surrounding tissues for their function. However, there is a concern that the tissue associated with the foreign body response to implants may become impermeable to oxygen over the long term and render the implant nonfunctional. We report oxygen ...
journal_title：Biomaterials
pub_type： 杂志文章
doi：10.1016/j.biomaterials.2014.05.012
更新日期：2014-09-01 00:00:00
abstract：:To realize a fast and selective capture of nano drug vehicles (NDVs) by malignant tumors, an instant affinity switchable NDV based on pH-sensitive surface protonation was prepared. This NDV is prepared from a zwitterionic polymer system with an ultra resistant poly(carboxybetaine) (pCB) shell and sulfo groups near a h...
journal_title：Biomaterials
pub_type： 杂志文章
doi：10.1016/j.biomaterials.2015.05.020
更新日期：2015-09-01 00:00:00
abstract：:The nanotopography and nanoscale geometry of the extra-cellular matrix (ECM) are important regulators of cell adhesion, motility and fate decision. However, unlike the sensing of matrix mechanics and ECM density, the molecular processes regulating the direct sensing of the ECM nanotopography and nanoscale geometry are...
journal_title：Biomaterials
pub_type： 杂志文章
doi：10.1016/j.biomaterials.2019.119683
更新日期：2020-02-01 00:00:00
abstract：:In the present study, we evaluated, in mice, the efficacy of the tetrafunctional block copolymer 704 as a nonviral gene delivery vector to the lungs. SPECT/CT molecular imaging of gene expression, biochemical assays, and immunohistochemistry were used. Our dataset shows that the formulation 704 resulted in higher leve...
journal_title：Biomaterials
pub_type： 杂志文章
doi：10.1016/j.biomaterials.2014.12.051
更新日期：2015-03-01 00:00:00
abstract：:Theranostic nanoagents which integrate diagnostic and therapeutic moieties into a single platform have attracted broad attention in cancer therapy, however the development of more effective and less toxic diagnostic and therapeutic interventions is still of great urgency. Herein, novel core-shell PB@MIL-100(Fe) dual m...
journal_title：Biomaterials
pub_type： 杂志文章
doi：10.1016/j.biomaterials.2016.05.027
更新日期：2016-09-01 00:00:00
abstract：:It is now well accepted that the initial rapid adsorption of blood proteins to biomaterial surfaces is important in the long-term performance of the implant. Cells that interact with the implant will be reacting to a layer (single or multiple) of adsorbed protein. The parameters of importance in a study of protein ads...
journal_title：Biomaterials
pub_type： 杂志文章
doi：10.1016/s0142-9612(97)00223-8
更新日期：1998-03-01 00:00:00
abstract：:Neonatal rat calvarial osteoblasts were cultured in 90% porous, 75:25 poly(DL-lactic-co-glycolic acid) (PLGA) foam scaffolds for up to 56 days to examine the effects of the cell seeding density, scaffold pore size, and foam thickness on the proliferation and function of the cells in this three-dimensional environment....
journal_title：Biomaterials
pub_type： 杂志文章
doi：10.1016/s0142-9612(98)00021-0
更新日期：1998-08-01 00:00:00
abstract：:Among the many applications for carbon nanotubes (CNTs), their use in medicine has drawn special attention due to their potential for a variety of therapeutic and diagnostic applications. As progress toward clinical applications continues, monitoring CNTs in vivo will be essential to evaluate their biodistribution, po...
journal_title：Biomaterials
pub_type： 杂志文章,评审
doi：10.1016/j.biomaterials.2016.05.045
更新日期：2016-09-01 00:00:00
abstract：:Articular cartilage injuries do not heal and large defects result in osteoarthritis with major personal and socioeconomic costs. Osteochondral transplantation is an effective treatment for large joint defects but its use is limited by the inability to store cartilage for long periods of time. Cryopreservation/vitrific...
journal_title：Biomaterials
pub_type： 杂志文章
doi：10.1016/j.biomaterials.2012.05.007
更新日期：2012-09-01 00:00:00
abstract：:Cell movement on adhesive surfaces is a complicated process based on myriad cell-surface interactions. Although both micron and nanoscale surface topography have been known to be important in understanding cell-materials interactions, typically only simple patterns (e.g., parallel lines or aligned posts) have been use...
journal_title：Biomaterials
pub_type： 杂志文章
doi：10.1016/j.biomaterials.2010.01.103
更新日期：2010-05-01 00:00:00
abstract：:Matrix systems used to study complex three-dimensional (3D) cellular processes like mammary epithelial tissue morphogenesis and tumorigenesis ex vivo often require ill-defined biological components, which lead to poor reproducibility and a lack of control over physical parameters. In this study, a well-defined, tunabl...
journal_title：Biomaterials
pub_type： 杂志文章
doi：10.1016/j.biomaterials.2016.10.007
更新日期：2017-01-01 00:00:00
abstract：:Tissue engineering requires the use of polymeric scaffolds that mimic many roles of extracellular matrices (ECM) in the body. Controlling cell-scaffold interactions is one of the most critical parameters for regulating cell phenotype in tissue engineering, and a peptide with the sequence of RGD has been widely exploit...
journal_title：Biomaterials
pub_type： 杂志文章
doi：10.1016/j.biomaterials.2010.03.063
更新日期：2010-07-01 00:00:00
abstract：:Injectable hydrogel biomaterials are promising therapies to promote repair and regeneration post-myocardial infarction (MI). However, the timing of delivery and the mechanisms through which biomaterial treatments confer their benefits are translational issues that remain to be addressed. We assessed the efficacy of an...
journal_title：Biomaterials
pub_type： 杂志文章
doi：10.1016/j.biomaterials.2014.11.004
更新日期：2015-01-01 00:00:00
abstract：:It is estimated that 4 to 5 million people are currently co-infected with Human Immunodeficiency Virus (HIV) and Hepatitis C Virus (HCV). HIV/HCV co-infection is associated with unique health risks including increased hepatotoxicity of antiretrovirals, accelerated progression of HCV and liver diseases. The standard in...
journal_title：Biomaterials
pub_type： 杂志文章
doi：10.1016/j.biomaterials.2013.01.026
更新日期：2013-05-01 00:00:00
abstract：:Docetaxel (DOC) produces anti-tumor effects by inducing apoptosis and inhibiting cell growth. However, its clinical application is limited by its hydrophobicity and low biocompatibility. Therefore, improving DOC's water solubility, biocompatibility, and anti-tumor effects are important goals that will improve its clin...
journal_title：Biomaterials
pub_type： 杂志文章
doi：10.1016/j.biomaterials.2015.02.108
更新日期：2015-01-01 00:00:00
abstract：:We studied non-implanted ultra-high molecular weight polyethylene (UHMWPE) knee components, that were gamma-sterilized in air and shelf-aged during 6 and 7 years, to explore fracture mechanisms in the degraded material. Prior to the fractography study, we assessed degradation through FTIR and optical density measureme...
journal_title：Biomaterials
pub_type： 杂志文章
doi：10.1016/s0142-9612(00)00399-9
更新日期：2001-08-01 00:00:00
abstract：:This study was designed to develop a skin permeable recombinant low-molecular-weight protamine (LMWP) conjugated epidermal growth factor (EGF) (rLMWP-EGF) by linking a highly positive charged LMWP to the N-terminal of EGF through genetic recombination. We evaluated its biological activity, skin permeability, and wound...
journal_title：Biomaterials
pub_type： 杂志文章
doi：10.1016/j.biomaterials.2012.07.061
更新日期：2012-11-01 00:00:00
abstract：:Hydrogels have been widely used for 3-dimensional (3D) cell culture and tissue regeneration due to their tunable biochemical and physicochemical properties as well as their high water content, which resembles the aqueous microenvironment of the natural extracellular matrix. While many properties of natural hydrogel ma...
journal_title：Biomaterials
pub_type： 杂志文章
doi：10.1016/j.biomaterials.2013.12.081
更新日期：2014-03-01 00:00:00
