Abstract：
:This study aimed to investigate the fluoride release properties and the effect on bond strength of two experimental adhesive cements. Synthesized particles of nano-fluorapatite (nano-FA) or nano-fluorohydroxyapatite (nano-FHA) were incorporated into a resin-modified glass ionomer cement (Fuji Ortho LC) and characterized using X-ray diffraction and scanning electron microscopy. Blocks with six different concentrations of nano-FA or nano-FHA were manufactured and their fluoride release properties evaluated by ultraviolet spectrophotometry. The unaltered glass ionomer cement Fuji Ortho LC (GC, control) and the two experimental cements with the highest fluoride release capacities (nano-FA+Fuji Ortho LC (GFA) and nano-FHA+Fuji Ortho LC (GFHA)) were used to bond composite blocks and orthodontic brackets to human enamel. After 24 h water storage all specimens were debonded, measuring the micro-tensile bond strength (μTBS) and the shear bond strength (SBS), respectively. The optimal concentration of added nano-FA and nano-FHA for maximum fluoride release was 25 wt.%, which nearly tripled fluoride release after 70 days compared with the control group. GC exhibited a significantly higher SBS than GFHA/GFA, with GFHA and GFA not differing significantly (P>0.05). The μTBS of GC and GFA were significantly higher than that of GFHA (P≤0.05). The results seem to indicate that the fluoride release properties of Fuji Ortho LC are improved by incorporating nano-FA or nano-FHA, simultaneously maintaining a clinically sufficient bond strength when nano-FA was added.
journal_name
Acta Biomaterjournal_title
Acta biomaterialiaauthors
Lin J,Zhu J,Gu X,Wen W,Li Q,Fischer-Brandies H,Wang H,Mehl Cdoi
10.1016/j.actbio.2010.10.029subject
Has Abstractpub_date
2011-03-01 00:00:00pages
1346-53issue
3eissn
1742-7061issn
1878-7568pii
S1742-7061(10)00504-0journal_volume
7pub_type
杂志文章abstract：:This study deals with cytotoxicity assays performed on an array of commercially manufactured inorganic nanoparticulate materials, including Ag, TiO(2), Fe(2)O(3), Al(2)O(3), ZrO(2), Si(3)N(4), naturally occurring mineral chrysotile asbestos and carbonaceous nanoparticulate materials such as multiwall carbon nanotube a...
journal_title：Acta biomaterialia
pub_type： 杂志文章
doi：10.1016/j.actbio.2006.11.004
更新日期：2007-05-01 00:00:00
abstract：:A pH-sensitive copolymer PAsp(DIP)-b-PAsp(MEA) (PDPM) was synthesized and self-assembled to micelle loading chemotherapeutic drug doxorubicin (DOX) and introducing a gold nanocage structure for photothermo-chemotherapy and photoacoustic imaging. After further surface modification with polyethylene glycol (PEG), the DO...
journal_title：Acta biomaterialia
pub_type： 杂志文章
doi：10.1016/j.actbio.2017.10.018
更新日期：2017-12-01 00:00:00
abstract：:Zinc (Zn) alloys have been considered as promising absorbable metals, mainly due to their moderate degradation rates ranging between magnesium alloys and iron alloys. The degradation behavior depends on the specific physiological environment. Released metallic ions and corrosion products directly influence biocompatib...
journal_title：Acta biomaterialia
pub_type： 杂志文章
doi：10.1016/j.actbio.2019.03.013
更新日期：2019-10-15 00:00:00
abstract：:CRISPR gene editing technology is strategically foreseen to control diseases by correcting underlying aberrant genetic sequences. In order to overcome drawbacks associated with viral vectors, the establishment of an effective non-viral CRISPR delivery vehicle has become an important goal for nanomaterial scientists. H...
journal_title：Acta biomaterialia
pub_type： 杂志文章
doi：10.1016/j.actbio.2020.07.027
更新日期：2020-09-15 00:00:00
abstract：:Tissue growth in bioscaffolds is influenced significantly by pore geometry, but how this geometric dependence emerges from dynamic cellular processes such as cell proliferation and cell migration remains poorly understood. Here we investigate the influence of pore size on the time required to bridge pores in thin 3D-p...
journal_title：Acta biomaterialia
pub_type： 杂志文章
doi：10.1016/j.actbio.2020.07.010
更新日期：2020-09-15 00:00:00
abstract：:Recently, the ligament-bone (LTB) junction has been emphasized for the effective transmission of mechanical force and the reduction in stress concentration between the soft ligament and hard bone tissue. The aim of this study was to regenerate an integrated LTB interface by inoculating LTB-relevant cells, isolated fro...
journal_title：Acta biomaterialia
pub_type： 杂志文章
doi：10.1016/j.actbio.2010.08.017
更新日期：2011-01-01 00:00:00
abstract：:This work reports and discusses the influence of four phosphonium-based ionic liquids (PhILs), namely trihexyl(tetradecyl) phosphonium dicyanamide, [P(6,6,6,14)][dca]; trihexyl(tetradecyl) phosphonium bis(trifluoromethylsulfonyl)imide, [P(6,6,6,14)][Tf(2)N]; tetrabutyl phosphonium bromide, [P(4,4,4,4)][Br]; and tetrab...
journal_title：Acta biomaterialia
pub_type： 杂志文章
doi：10.1016/j.actbio.2011.10.034
更新日期：2012-03-01 00:00:00
abstract：:Inkjet printing of antibiotic- and calcium-eluting micropatterns was explored as a novel means of preventing the formation of biofilm colonies and facilitating osteogenic cell development on orthopedic implant surfaces. The micropatterns consisted of a periodic array of ∼50 μm circular dots separated by ∼150 μm. The c...
journal_title：Acta biomaterialia
pub_type： 杂志文章
doi：10.1016/j.actbio.2011.08.006
更新日期：2012-01-01 00:00:00
abstract：:Recapitulation of endochondral ossification leads to a new concept of bone tissue engineering via a cartilage intermediate as an osteoinductive template. In this study, we aimed to investigate the influence of in vitro chondrogenic priming time for the creation of cartilage template on the in vivo endochondral bone fo...
journal_title：Acta biomaterialia
pub_type： 杂志文章
doi：10.1016/j.actbio.2014.11.029
更新日期：2015-02-01 00:00:00
abstract：:We develop an elastic-isotropic rod model for twisted DNA in the plectonemic regime. We account for DNA elasticity, electrostatic interactions and entropic effects due to thermal fluctuations. We apply our model to single-molecule experiments on a DNA molecule attached to a substrate at one end, while subjected to a t...
journal_title：Acta biomaterialia
pub_type： 杂志文章
doi：10.1016/j.actbio.2012.01.030
更新日期：2012-07-01 00:00:00
abstract：:The present work is an amalgamation of computation and experimental approach to gain an insight into composition-structure-bioactivity relationships of alkali-free bioactive glasses in the CaO-MgO-SiO2-P2O5 system. The glasses have been designed in the diopside (CaO·MgO·2SiO2; Di)-tricalcium phosphate (3CaO·P2O5; TCP)...
journal_title：Acta biomaterialia
pub_type： 杂志文章
doi：10.1016/j.actbio.2015.01.001
更新日期：2015-03-01 00:00:00
abstract：:This work demonstrates the effects of both surface preparation and surface post-treatment by exposure to electron beam on the surface texture, contact angle and the interaction with bone-forming cells of electrochemically deposited hydroxyapatite (HAp) coating. Both the surface texture and the contact angle of the gro...
journal_title：Acta biomaterialia
pub_type： 杂志文章
doi：10.1016/j.actbio.2009.04.005
更新日期：2009-10-01 00:00:00
abstract：:A novel bactericidal material comprising rod-shaped core-shell-shell Au-Ag-Au nanorods is constructed as a nanoheater in the near-infrared (NIR) region. The outer Au shell melts under laser irradiation and results in exposure of the inner Ag shell, facilitating the controlled release of the antibacterial Ag shell/laye...
journal_title：Acta biomaterialia
pub_type： 杂志文章
doi：10.1016/j.actbio.2014.09.005
更新日期：2015-01-01 00:00:00
abstract：:The degradation of zirconia-based ceramic components for total hip arthroplasty (head and cup) has been the topic of many works. However, the correlation between what is measured in vivo and what is expected from in vitro simulations on hip simulators may be sometimes feeble, especially where zirconia component are co...
journal_title：Acta biomaterialia
pub_type： 杂志文章
doi：10.1016/j.actbio.2013.03.030
更新日期：2013-07-01 00:00:00
abstract：:First-principles calculations were carried out to reveal local atomic arrangements and thermodynamic stability of substitutional divalent cations of Mg(2+), Zn(2+), Sr(2+) and Ba(2+) in tricalcium phosphates (TCPs). There are two modifications of α-TCP and β-TCP, and a number of inequivalent Ca sites are present in th...
journal_title：Acta biomaterialia
pub_type： 杂志文章
doi：10.1016/j.actbio.2015.05.014
更新日期：2015-09-01 00:00:00
abstract：:The deposition of fibronectin (FN) from saline buffer-based cryogenic targets by matrix-assisted pulsed laser evaporation (MAPLE) onto silicon substrates is reported. A uniform distribution of FN was revealed by Ponceau staining after control experiments on nitrocellulose paper. Well-organized particulates with height...
journal_title：Acta biomaterialia
pub_type： 杂志文章
doi：10.1016/j.actbio.2011.06.016
更新日期：2011-10-01 00:00:00
abstract：:Combretastatin A4 (CA4) is a leading agent in vascular disrupting strategies for tumor therapy. Although many small-molecule prodrugs of CA4 have been developed to improve its solubility, the overall therapeutic efficiency is moderate. A key reason for this is the reversible effect that CA4 has on tubulin as well as i...
journal_title：Acta biomaterialia
pub_type： 杂志文章
doi：10.1016/j.actbio.2017.02.001
更新日期：2017-04-15 00:00:00
abstract：:A chitosan oligosaccharide (CSO)-indomethacin (IDM) conjugate (CI) was synthesized to fabricate chemosensitizing nanoparticles (NPs) for tumor-targeted drug delivery. IDM was conjugated to a CSO backbone via amide bond formation, of which successful synthesis was confirmed by proton-nuclear magnetic resonance analyses...
journal_title：Acta biomaterialia
pub_type： 杂志文章
doi：10.1016/j.actbio.2017.05.012
更新日期：2017-07-15 00:00:00
abstract：UNLABELLED:Antifouling polymers have wide applications in biomedical engineering and marine industry. Recently, zwitterionic materials have been reported as promising candidates for antifouling applications, while strong hydration is believed to be the key antifouling mechanism. Zwitterionic materials can be designed w...
journal_title：Acta biomaterialia
pub_type： 杂志文章,评审
doi：10.1016/j.actbio.2016.02.030
更新日期：2016-08-01 00:00:00
abstract：:Networks synthesized through thiol-acrylate photopolymerization or Michael-type addition step growth reactions contain esters with neighboring sulfide groups. Previous work has demonstrated that these esters are readily hydrolyzable at physiological pH. Here, the influence of the distance between the sulfide and ester...
journal_title：Acta biomaterialia
pub_type： 杂志文章
doi：10.1016/j.actbio.2006.12.001
更新日期：2007-07-01 00:00:00
abstract：:Palliation therapy for dysphagia using esophageal stents is the current treatment of choice for those patients with inoperable esophageal malignancies. However, the metallic and plastic stents currently used in the clinical setting may cause complications, such as tumor ingrowth and stent migration into the stomach. T...
journal_title：Acta biomaterialia
pub_type： 杂志文章
doi：10.1016/j.actbio.2018.10.035
更新日期：2019-01-01 00:00:00
abstract：:Delivery of vaccine antigens with an appropriate adjuvant can trigger potential immune responses against cancer leading to reduced tumor growth and improved survival. In this study, various formulations of a bioerodible amphiphilic polyanhydride copolymer based on 1,8-bis(p-carboxyphenoxy)-3,6-dioxaoctane (CPTEG) and ...
journal_title：Acta biomaterialia
pub_type： 杂志文章
doi：10.1016/j.actbio.2012.11.001
更新日期：2013-03-01 00:00:00
abstract：:The design and development of bioactive materials that are inherently conducive for osteointegration and bone regeneration with tunable mechanical properties and degradation remains a challenge. Herein, we report the development of a new class of citrate-based materials with glycerophosphate salts, β-glycerophosphate ...
journal_title：Acta biomaterialia
pub_type： 杂志文章
doi：10.1016/j.actbio.2019.03.050
更新日期：2019-07-15 00:00:00
abstract：:Durophagous fish consume a diet based primarily on hard-shelled animals, mainly mollusks. In order to successfully perform this task, they are equipped with an extra set of jaws located in their throat called pharyngeal jaws. Here we present the results of a study of the structure of the bony material of the exception...
journal_title：Acta biomaterialia
pub_type： 杂志文章
doi：10.1016/j.actbio.2020.01.001
更新日期：2020-03-01 00:00:00
abstract：:Gelatin and alginate derivatives possessing phenolic hydroxyl moieties (gelatin-Ph and Alg-Ph) were dissolved in aqueous solution and conjugated via horseradish peroxidase-catalyzed crosslinking, resulting in hydrogelation. The objective of creating the hydrogels was to prepare cell sheets and spherical tissues wrappe...
journal_title：Acta biomaterialia
pub_type： 杂志文章
doi：10.1016/j.actbio.2013.01.037
更新日期：2013-05-01 00:00:00
abstract：:The limitations of the current clinical options for valve replacements have inspired the development of enabling technologies to create a tissue engineered heart valve (TEHV). Poly(ethylene glycol) diacrylate (PEGDA) hydrogel scaffolds permit greater biological and biomechanical customization than do non-woven mesh sc...
journal_title：Acta biomaterialia
pub_type： 杂志文章
doi：10.1016/j.actbio.2011.02.018
更新日期：2011-06-01 00:00:00
abstract：:Cardiac tissue engineering is focused on obtaining functional cardiomyocyte constructs to provide an alternative to cellular cardiomyoplasty. Mechanical stimuli have been shown to stimulate protein expression and the differentiation of mammalian cells from contractile tissues. Our aim was to obtain a flexible scaffold...
journal_title：Acta biomaterialia
pub_type： 杂志文章
doi：10.1016/j.actbio.2006.12.006
更新日期：2007-07-01 00:00:00
abstract：:Cell-instructive hydrogels are attractive for skin repair and regeneration, serving as interactive matrices to promote cell adhesion, cell-driven remodeling and de novo deposition of extracellular matrix components. This paper describes the synthesis and photocrosslinking of cell-instructive pectin hydrogels using cel...
journal_title：Acta biomaterialia
pub_type： 杂志文章
doi：10.1016/j.actbio.2017.11.016
更新日期：2018-01-15 00:00:00
abstract：:Recently, the progress in biomaterials for biomedical applications brings the focus of the research community toward nanomaterials. The nanofibrous matrices offer certain advantages (structural similarity to extracellular matrix, high surface area-to-volume ratio, increased elasticity, biostability, and strength) comp...
journal_title：Acta biomaterialia
pub_type： 杂志文章
doi：10.1016/j.actbio.2018.07.047
更新日期：2018-09-15 00:00:00
abstract：:Three-dimensional (3D) tissue-engineered in vitro models, particularly multicellular spheroids and organoids, have become important tools to explore disease progression and guide the development of novel therapeutic strategies. These avascular constructs are particularly powerful in oncological research due to their a...
journal_title：Acta biomaterialia
pub_type： 杂志文章
doi：10.1016/j.actbio.2020.09.042
更新日期：2020-11-01 00:00:00
