Abstract:
:Anisotropic scaffolds with the typical structure of lamellar, aligned and continuous pores were successfully achieved by the directional solidification of water-based β-tricalcium phosphate (β-TCP) suspensions. Adjustable porosities from 49 to 82%, tunable pore widths from 8 to 50μm and linked ceramic cells with wall thicknesses from 4 to 30μm were obtained. Correlated compressive strengths reached from 0.4MPa (82% porosity, low solidification velocity of 10μms(-1)) to 40MPa (49% porosity, high solidification velocity of 30μms(-1)). At a given scaffold porosity, the compressive strength increased by more than twofold with increasing solidification velocity due to attendant structural changes. Thus, the key to controlling structural sizes, besides the trivial control of porosity through the water content in the initial suspension, is to control the solidification velocity. In this study, an analytical solution of the heat conduction equation was used as a novel approach to control the solidification velocity during the process. The relationships between processing conditions and resulting structure as well as between structure and mechanical properties were elucidated and discussed.
journal_name
Acta Biomaterjournal_title
Acta biomaterialiaauthors
Flauder S,Gbureck U,Müller FAdoi
10.1016/j.actbio.2014.08.020subject
Has Abstractpub_date
2014-12-01 00:00:00pages
5148-5155issue
12eissn
1742-7061issn
1878-7568pii
S1742-7061(14)00356-0journal_volume
10pub_type
杂志文章abstract::The objective was to evaluate the presence and distribution of the lubricating and anti-adhesion glycoprotein lubricin and cells containing the contractile isoform smooth muscle α-actin (SMA) in pseudomembranes around loose hip prostheses. Periprosthetic tissue was obtained at revision arthroplasty of eight aseptic, l...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2012.11.010
更新日期:2013-03-01 00:00:00
abstract::The effect of diffusion coating of Nd on the corrosion performance of Mg-1.2%Nd-0.5%Y-0.5%Zr-0.4%Ca alloy (EW10X04) used as a new structural material for biodegradable implants was evaluated in a simulated physiological electrolyte. The initial Nd layer with a thickness of 1 μm was obtained by a physical vapor deposit...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2013.01.009
更新日期:2013-11-01 00:00:00
abstract::The synthesis of microspheres for tissue regeneration requires good control over the particle size and size distribution. This is particularly important when considering the immune response that may be triggered by the presence of particles in tissue. This report outlines the design of an injectable microsphere system...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2019.03.014
更新日期:2019-04-15 00:00:00
abstract::Recent studies indicate that there is a great demand to optimize pure Zn with tunable degradation rates and more desirable biocompatibility as orthopedic implants. Metal matrix composite (MMC) can be a promising approach for this purpose. In this study, MMC with pure Zn as a matrix and hydroxyapatite (HA) as reinforce...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2018.03.007
更新日期:2018-04-15 00:00:00
abstract:UNLABELLED:The development of scaffolds for bone filling of large defects requires an understanding of angiogenesis and vascular guidance, which are crucial processes for bone formation and healing. There are few investigations on the ability of a scaffold to support blood vessel guidance and it this is of great import...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2016.04.039
更新日期:2016-07-01 00:00:00
abstract::Cyclic stresses are often related to the premature mechanical failure of metallic biomaterials. The complex interaction between fatigue and corrosion in the physiological environment has been subject of many investigations. In this context, microstructure, heat treatments, plastic deformation, surface finishing and co...
journal_title:Acta biomaterialia
pub_type: 杂志文章,评审
doi:10.1016/j.actbio.2011.09.012
更新日期:2012-03-01 00:00:00
abstract::Implant-derived material from metal-on-metal (MOM) hip arthroplasties may be responsible for an unexplained tissue inflammatory response. The chemical form of the metal species in the tissues is predominantly chromium (Cr), but the currently used techniques have not been able to determine whether this is Cr(III) phosp...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2010.06.006
更新日期:2010-11-01 00:00:00
abstract::Promoting nerve regeneration requires engineering cellular carriers to physically and biochemically support neuronal growth into a long lasting functional tissue. This study systematically evaluated the capacity of a biosynthetic poly(vinyl alcohol) (PVA) hydrogel to support growth and differentiation of co-encapsulat...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2018.11.044
更新日期:2019-09-01 00:00:00
abstract::Podophyllotoxin (PPT) is a chemotherapeutic agent which has shown significant activity against P-glycoprotein (P-gp) mediated multi drug resistant cancer cells. However, because of the poor aqueous solubility and high toxicity, PPT cannot be used in clinical cancer therapy. In order to enhance the efficiency and reduc...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2018.04.016
更新日期:2018-06-01 00:00:00
abstract::Multifunctional nanoplatforms offering simultaneous imaging and therapeutic functions have been recognized as a highly promising strategy for personalized nanomedicine. In this work, we synthesized a farnesylthiosalicylate (FTS, a nontoxic Ras antagonist) based triblock copolymer POEG-b-PVBA-b-PFTS (POVF) composed of ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2018.06.010
更新日期:2018-07-15 00:00:00
abstract::We report on new types of chitosan-based nanogels via an ortho ester-based linkage, used as drug carriers for efficient chemotherapy. First, we synthesized a novel diacrylamide containing ortho ester (OEAM) as an acid-labile cross-linker. Subsequently, methacrylated succinyl-chitosan (MASCS) was prepared and polymeriz...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2017.05.003
更新日期:2017-09-15 00:00:00
abstract::Serum albumin was conjugated to poly-(ethylene glycol) (PEG) and cross-linked to form mono-PEGylated albumin hydrogels. These hydrogels were used as a basis for drug carrying tissue engineering scaffold materials, based on the natural affinity of various drugs and compounds for the tethered albumin in the polymer netw...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2010.07.017
更新日期:2011-01-01 00:00:00
abstract::Although novel molecular targeted drugs have been recognized as an effective therapy for non-small cell lung cancer (NSCLC) harboring epidermal growth factor receptor (EGFR) activating mutations, their efficacy fails to meet the expectation due to the acquired resistance in tumors. Up-regulation of the anti-apoptotic ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2018.06.034
更新日期:2018-08-01 00:00:00
abstract::The clinical applications of protein drugs are restricted because of the absence of viable protein delivery vehicles. Here, we report on reduction- and pH--sensitive crosslinked polymersomes based on the poly(ethylene glycol)-poly(acrylic acid)-poly(2-(diethyl amino)ethyl methacrylate) (PEG-PAA-PDEA) triblock copolyme...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2014.01.010
更新日期:2014-05-01 00:00:00
abstract:UNLABELLED:Natural amino acids are zwitterionic molecules and the good biocompatibility promises them potential candidates as anti-fouling materials. Here, we developed a new method to functionalize silica nanoparticles with a natural amino acid-based anti-fouling layer. Amino acids were covalently immobilized on 3-ami...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2016.03.035
更新日期:2016-08-01 00:00:00
abstract::A critical challenge to regenerating close mimics of native axonal pathways under chronic neurodegenerative disease or injury conditions is the inability to stimulate, sustain and steer neurite outgrowth over a long distance, until they reach their intended targets. Understanding neurite outgrowth necessitates quantit...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2014.05.009
更新日期:2014-08-01 00:00:00
abstract::Modification of a biomedical-grade stainless steel 316LS surface by electrochemical cyclic potentiodynamic passivation (CPP) and the response of fibrinogen (Fg), platelets, endothelial cells (ECs) and smooth muscles cells (SMCs) to this surface was investigated. Polarization modulation infrared reflection absorption s...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2009.07.007
更新日期:2010-02-01 00:00:00
abstract::Bone is an adaptive material that is designed for different functional requirements; indeed, bones have a variety of properties depending on their role in the body. To understand the mechanical response of bone requires the elucidation of its structure-function relationships. Here, we examine the fracture toughness of...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2009.11.026
更新日期:2010-04-01 00:00:00
abstract::A rapidly expanding literature broadly documents the impact of biophysical cues on cellular behaviors. In spite of increasing research efforts in this field, the underlying signaling processes are poorly understood. One of the candidate molecules for being involved in mechanotransduction is focal adhesion kinase (FAK)...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2012.07.004
更新日期:2012-12-01 00:00:00
abstract::Chitosan membranes were modified with mouse epidermal growth factor (EGF) by a photochemical technique. Photochemical immobilization was performed via a two-step process, in which EGF was first reacted with a heterobifunctional cross-linker sulfo-SANPAH (sulfosuccinimidyl 6(4'-azido-2'-nitrophenyl-amino)hexanoate) and...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2008.02.003
更新日期:2008-07-01 00:00:00
abstract::In this study the friction, wear and surface mechanical behavior of medical-grade ultra-high molecular weight polyethylene (UHMWPE) (GUR 1050 resin) were evaluated as a function of polymer crystallinity. Crystallinity was controlled by heating UHMWPE to a temperature above its melting point and varying the hold time a...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2008.02.022
更新日期:2008-09-01 00:00:00
abstract::The uptake and trafficking of NPs is impacted by several attributes such as size, shape, surface charge and importantly by surface ligands that can interact with the cell plasma membrane. We envision that NPs which can be readily modified in aqueous environments will be key to engineering patient-specific nanotherapeu...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2020.08.038
更新日期:2020-10-15 00:00:00
abstract::Site-specific controlled release of exogenous angiogenic growth factors, such as recombinant human basic fibroblast growth factor (rhbFGF), has become a promising approach to improve peripheral vascular disease. Here, we have developed an implant composed of spiral magnesium (Mg) and a coating made using poly(lactic-c...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2017.09.033
更新日期:2017-12-01 00:00:00
abstract::There is an increasing clinical need to design novel dental materials that combine regenerative and antibacterial properties. In this work the characterization of a recently developed sol-gel-derived bioactive glass ceramic containing silver ions (Ag-BG) is presented. The microstructural characteristics, ion release p...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2014.04.030
更新日期:2014-08-01 00:00:00
abstract::Biodegradable magnesium alloy stents (MAS) could present improved long-term clinical performances over commercial bare metal or drug-eluting stents. However, MAS were found to show limited mechanical support for diseased vessels due to fast degradation. Optimizing stent design through finite element analysis (FEA) is ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2012.10.035
更新日期:2013-11-01 00:00:00
abstract::Due to the prevalence of problems caused by wear particles, the reduced durability of total joint replacements is well documented. The characterization of wear debris enables the size and morphology of these wear particles to be measured and provides an assessment of the biological response in vivo. However, the impac...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2013.07.039
更新日期:2013-12-01 00:00:00
abstract::In this study a novel kind of porous poly(l-glutamic acid) (PLGA)/chitosan polyelectrolyte complex (PEC) microsphere was developed through electrostatic interaction between PLGA and chitosan. By adjusting the formula parameters chitosan microspheres with an average pore size of 47.5 ± 5.4 μm were first developed at a ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2013.09.002
更新日期:2014-01-01 00:00:00
abstract::A major problem with transcutaneous osseointegrated implants is infection, mainly due to improper closure of the implant-skin interface. Therefore, the design of transcutaneous osseointegrated devices that better promote skin growth around these exit sites needs to be examined and, if successful, would clearly limit i...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2009.12.016
更新日期:2010-06-01 00:00:00
abstract::Surgical meshes are effective and frequently used to reinforce soft tissues. Fibrin glue (FG) has been widely used for mesh fixation and is also considered an optimal vehicle for stem cell delivery. The aim of this preclinical study was to evaluate the therapeutic effect of MSCs and their exosomes combined with FG for...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2018.02.014
更新日期:2018-04-15 00:00:00
abstract::With the aim of minimizing thrombus formation in blood-contacting devices, tissue plasminogen activator (t-PA)-containing polyurethane (PU) materials have been developed. Cationic PU surfaces were prepared by grafting poly(dimethylaminoethyl methacrylate) and quaternizing the tertiary amino groups with iodomethane or ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2011.01.026
更新日期:2011-05-01 00:00:00