Abstract:
:Recent studies indicate that there is a great demand to optimize pure Zn with tunable degradation rates and more desirable biocompatibility as orthopedic implants. Metal matrix composite (MMC) can be a promising approach for this purpose. In this study, MMC with pure Zn as a matrix and hydroxyapatite (HA) as reinforcements were prepared by spark plasma sintering (SPS). Feasibility of novel Zn-HA composites to be used as orthopedic implant applications was systematically evaluated. After sintering, HA distributed in the Zn particle boundaries uniformly. Corrosion tests indicated that the degradation rates of Zn-HA composites were adjustable due to the biphasic effects of HA. Zn-HA composites showed significantly improved cell viability of osteoblastic MC3T3-E1 cells compared with pure Zn. Both pure Zn and composites exhibited a low thrombosis risk and hemolysis rates while a Zn ion concentration-dependent effect was found on coagulation time. An effective antibacterial property was observed as well. The volume loss of pure Zn and Zn-5HA composite was 1.7% and 3.2% after 8 weeks' implantation. Histological analysis found newly formed bone surrounding pure Zn and Zn-5HA composite at week 4 and increased bone mass over time. With prolonged implantation time, Zn-5HA composite was more effective on stimulating new bone formation than pure Zn. In summary, MMC is a feasible way to design Zn based materials with adjustable degradation rates and improved biocompatibility. STATEMENT OF SIGNIFICANCE:Biodegradable zinc materials are promising candidates for the new generation of orthopedic implants. However, the slow degradation rates and unsatisfactory cytocompatibility of pure Zn in bone environments limit its future clinical applications. Generally, alloying is a common way to improve the performance of pure Zn. In this study, metal matrix composite was chosen as a novel strategy to solve the problems. Hydroxyapatite, as a bioactive component, was added into Zn matrix via spark plasma sintering. We find that Zn-HA composites exhibited adjustable degradation rates and improved biocompatibility both in vitro and in vivo. This study provides exhaustive and significant information including microstructure, mechanical performance, degradation behavior, biocompatibility, hemocompatibility and antibacterial property for the future Zn based implants design.
journal_name
Acta Biomaterjournal_title
Acta biomaterialiaauthors
Yang H,Qu X,Lin W,Wang C,Zhu D,Dai K,Zheng Ydoi
10.1016/j.actbio.2018.03.007subject
Has Abstractpub_date
2018-04-15 00:00:00pages
200-214eissn
1742-7061issn
1878-7568pii
S1742-7061(18)30127-2journal_volume
71pub_type
杂志文章abstract::Electrospun scaffolds provide a promising approach for tissue engineering as they mimic the physical properties of extracellular matrix. Previous studies have demonstrated that electrospun scaffolds with porous features on the surface of single fibers, enhanced cellular attachment and proliferation. Yet, little is kno...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2017.07.003
更新日期:2017-09-01 00:00:00
abstract::Semiconducting nanoparticles, more commonly known as quantum dots, possess unique size and shape dependent optoelectronic properties. In recent years, these unique properties have attracted much attention in the biomedical field to enable real-time tissue imaging (bioimaging), diagnostics, single molecule probes, and ...
journal_title:Acta biomaterialia
pub_type: 杂志文章,评审
doi:10.1016/j.actbio.2019.05.022
更新日期:2019-08-01 00:00:00
abstract::This study investigates the bone and tissue response to degrading magnesium pin implants in the growing rat skeleton by continuous in vivo microfocus computed tomography (μCT) monitoring over the entire pin degradation period, with special focus on bone remodeling after implant dissolution. The influence of gas releas...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2011.11.008
更新日期:2012-03-01 00:00:00
abstract:UNLABELLED:Fluorescence microscopy and spectroscopy techniques are commonly used to investigate complex and interacting biological systems (e.g. proteins and nanoparticles in living cells), since these techniques can explore intracellular dynamics with high time resolution at the nanoscale. Here we extended one of the ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2016.07.031
更新日期:2016-09-15 00:00:00
abstract::Blood-contacting medical devices are an integral part of modern medicine. Such devices may be used for only a few hours or may be implanted for life. Despite advances in biomaterial science, clotting on medical devices remains a common problem. Systemic administration of antiplatelet drugs or anticoagulants is often n...
journal_title:Acta biomaterialia
pub_type: 杂志文章,评审
doi:10.1016/j.actbio.2019.06.021
更新日期:2019-08-01 00:00:00
abstract::Spatiotemporally controlled release of growth factors (GFs) is critical for regenerative processes such as angiogenesis. A common strategy is to encapsulate the GF within hydrogels, with release being controlled via diffusion and/or gel degradation (i.e., hydrolysis and/or proteolysis). However, simple encapsulation s...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2016.09.026
更新日期:2016-12-01 00:00:00
abstract::The poor delivery of nanoparticles to target cancer cells hinders their success in the clinical setting. In this work, an alternative target readily available for circulating nanoparticles has been selected to eliminate the need for nanoparticle penetration in the tissue: the tumor blood vessels. A tumor endothelium-t...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2019.11.004
更新日期:2020-01-01 00:00:00
abstract:UNLABELLED:Here, we demonstrate the possible applications of micropillar arrays in screening anti-metastasis drugs. Human lung adenocarcinoma A549 cells incubated in multiwell plates containing micropillars exhibited markedly different physical/biochemical behavior depending on pillar dimensions. In particular, A549 ce...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2015.08.041
更新日期:2015-11-01 00:00:00
abstract::The physical and mechanical properties of structural proteins such as silk fibroin can be modified by controlled conformational change, which is regularly monitored by Fourier transform infrared spectroscopy by peak fitting of the amide I band envelope. Although many variables affecting peak shape are well established...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2018.03.058
更新日期:2018-06-01 00:00:00
abstract::Limited regenerative capacity of the nervous system makes treating traumatic nerve injuries with conventional polymer-based nerve grafting a challenging task. Consequently, utilizing natural polymers and biomimetic topologies became obvious strategies for nerve conduit designs. As a bioinspired natural polymer from a ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2019.04.018
更新日期:2019-05-01 00:00:00
abstract::Vascular damage develops with diverging severity during and after percutaneous coronary intervention with stent placement and is the prevailing stimulus for in-stent restenosis. Previous work has failed to link mechanical data obtained in a realistic in vivo or in vitro environment with data collected during imaging p...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2020.08.016
更新日期:2020-10-15 00:00:00
abstract::The use of pulsed electromagnetic fields (PEMFs) is a promising approach to promote osteogenesis. However, few studies have reported the effects of this technique on the osseointegration of endosseous implants, especially with regard to different implant topographies. We focused on how the initial interaction between ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2013.10.008
更新日期:2014-02-01 00:00:00
abstract::The understanding of adhesive interaction at the nanoscale between functionalized nanoparticles and biological cells is of great importance to develop effective theranostic nanocarriers for targeted cancer therapy. Here, we report a combination of experimental and computational approaches to evaluate the adhesion betw...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2018.02.011
更新日期:2018-04-15 00:00:00
abstract::The mechanical properties of Bombyx mori silk fibroin (SF), such as elasticity and tensile strength, change remarkably upon hydration. However, the microscopic interaction with water is not currently well understood on a molecular level. In this work, the dynamics of water molecules interacting with SF was studied by ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2016.12.052
更新日期:2017-03-01 00:00:00
abstract::In this research, the flexural performance of hedgehog spines is investigated in four ways. First, X-ray micro-computed tomography (μCT) is employed to analyze the complex internal architecture of hedgehog spines. μCT images reveal distinct structural morphology, characterized by longitudinal stringers and transverse ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2019.04.036
更新日期:2019-08-01 00:00:00
abstract::Implant-associated infections is one of the most challenging post-operative complications in bone-related implantations. To tackle this clinical issue, we developed a low-cost and durable surface coating for medical grade titanium implants that uses positively charged silane molecules. The in vitro antimicrobial tests...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2020.07.040
更新日期:2020-09-15 00:00:00
abstract::Despite of the progress made to engineer structured microtissues such as BioMEMS and 3D bioprinting, little control exists how microtissues transform as they mature, as the misbalance between cell-generated forces and the strength of cell-cell and cell-substrate contacts can result in unintended tissue deformations an...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2016.08.044
更新日期:2016-11-01 00:00:00
abstract::The present study focuses on apatite coating on collagen films, with various different densities of carboxyl groups, using an alternate soaking process. Anionic collagen (AC), which has different densities of carboxylic groups compared to native collagen (NC), was obtained by hydrolysis of carboxyamides of asparagine ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2007.02.008
更新日期:2007-09-01 00:00:00
abstract::The surface topography and local elastic moduli of endothelial cells exposed to shear stress were measured using atomic force microscopy. Bovine aortic endothelial cells were exposed to shear stress of 2Pa for 6, 12 or 24h. In addition, a confocal laser-scanning microscope used in conjunction with the atomic force mic...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2006.07.009
更新日期:2007-05-01 00:00:00
abstract::This paper presents a strain-mediated phenomenological corrosion model, based on the discrete finite element modelling method which was developed for use with the ANSYS Implicit finite element code. The corrosion model was calibrated from experimental data and used to simulate the corrosion performance of a WE43 magne...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2017.04.020
更新日期:2017-06-01 00:00:00
abstract::Antibacterial and remineralizing dental composites and adhesives were recently developed to inhibit biofilm acids and combat secondary caries. It is not clear what effect these materials will have on dental pulps in vivo. The objectives of this study were to investigate the antibacterial and remineralizing restoration...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2014.02.033
更新日期:2014-06-01 00:00:00
abstract::Functionalization of polymeric biomaterials permits the conjugation of cell signaling molecules capable of directing cell function. In this study, l-phenylalanine and l-aspartic acid were used to synthesize poly(ester amide)s (PEAs) with pendant carboxylic acid groups through an interfacial polycondensation approach. ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2014.04.014
更新日期:2014-08-01 00:00:00
abstract::Two classes of amphiphilic macromolecules were evaluated for drug delivery applications: those that exist as unimolecular micelles and those that self-assemble in aqueous solution to form micelles. This study compares the poly(ethylene glycol) (PEG) chain length and density that constitute the corona of both classes. ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2008.10.019
更新日期:2009-03-01 00:00:00
abstract:UNLABELLED:Injectable biomaterials have been evaluated as potential new therapies for myocardial infarction (MI) and heart failure. These materials have improved left ventricular (LV) geometry and ejection fraction, yet there remain concerns that biomaterial injection may create a substrate for arrhythmia. Since studie...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2015.08.004
更新日期:2015-10-01 00:00:00
abstract::Challenges remain in the generation of heterogeneous tissues and the repairing of interfacial tissue between soft and hard tissues. The development of tissue engineering scaffolds with gradients in composition, structure, mechanical and chemical properties is essential to modulate cellular behaviors in a graded way an...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2012.01.003
更新日期:2012-04-01 00:00:00
abstract::A three-dimensional (3-D) cell culture system that allows control of both substrate stiffness and integrin binding density was created and characterized. This system consisted of two self-assembling peptide (SAP) sequences that were mixed in different ratios to achieve the desired gel stiffness and adhesiveness. The s...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2013.04.002
更新日期:2013-08-01 00:00:00
abstract::Degradation characteristics in response to electron beam sterilization of designed and biodegradable aliphatic polyester scaffolds are relevant for clinically successful synthetic graft tissue regeneration. Scaffold degradation in vitro and in vivo were documented and correlated to the macroscopic structure and chemic...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2011.02.011
更新日期:2011-05-01 00:00:00
abstract::We present a systematic study for investigating the role of exposed hydroxyapatite (HA) nanoparticles in influencing surface characteristics and mouse pre-osteoblastic MC3T3-E1 cell behavior using nanocomposites prepared by photo-crosslinking poly(ε-caprolactone) diacrylate (PCLDA) with HA. PCLDA530 and PCLDA2000 synt...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2011.01.034
更新日期:2011-05-01 00:00:00
abstract::A recombinant red fluorescent protein, DsRed, was chosen as a model protein to prepare a protein-encapsulated bioaerogel, DsRed-SAG. It was prepared using sol-gel polymerization of tetraethyl orthosilicate (TEOS) with an ionic liquid as the solvent and pore-forming agent. The DsRed-SAG bioaerogel was characterized by ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2007.10.007
更新日期:2008-05-01 00:00:00
abstract::Critical failures associated with current engineered bone grafts involve insufficient induction of osteogenesis of the implanted cells and lack of vascular integration between graft scaffold and host tissue. This study investigated the combined effects of surface microtextures and biochemical supplements to achieve os...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2015.02.021
更新日期:2015-05-01 00:00:00