Abstract:
CLINICAL RELEVANCE:The use of laser light during bleaching will not reduce the incidence or severity of sensitivity and will not increase the degree of color change compared with nonlaser light sources. SUMMARY:Objective: To evaluate whether the use of laser during in-office bleaching promotes a reduction in dental sensitivity after bleaching compared with other light sources.Methods: The present review was conducted following the Preferred Reporting Items for Systematic Reviews and Meta-analyses (PRISMA) and is registered with PROSPERO (CDR42018096591). Searches were conducted in the PubMed/Medline, Web of Science, and Cochrane Library databases for relevant articles published up to August 2018. Only randomized clinical trials among adults that compared the use of laser during in-office whitening and other light sources were considered eligible.Results: After analysis of the texts retrieved during the database search, six articles met the eligibility criteria and were selected for the present review. For the outcome dental sensitivity, no significant difference was found favoring any type of light either for intensity (mean difference [MD]: -1.60; confidence interval [CI]: -3.42 to 0.22; p=0.09) or incidence (MD: 1.00; CI: 0.755 to 1.33; p=1.00). Regarding change in tooth color, no significant differences were found between the use of the laser and other light sources (MD: -2.22; CI: -6.36 to 1.93; p=0.29).Conclusions: Within the limitations of the present study, laser exerts no influence on tooth sensitivity compared with other light sources when used during in-office bleaching. The included studies demonstrated that laser use during in-office bleaching may have no influence on tooth color change.
journal_name
Oper Dentjournal_title
Operative dentistryauthors
Casado B,Pellizzer EP,Souto Maior JR,Lemos C,Vasconcelos B,Moraes Sdoi
10.2341/19-064-Lsubject
Has Abstractpub_date
2020-11-01 00:00:00pages
589-597issue
6eissn
0361-7734issn
1559-2863pii
436466journal_volume
45pub_type
杂志文章,meta分析abstract::This study evaluated the effect of ascorbic acid, 500 mg every eight hours, on bleaching-induced tooth sensitivity. A triple-blind, parallel design, and placebo-controlled randomized clinical trial was conducted on 39 adults. The pills (placebo or ascorbic acid) were administered three times per day for 48 hours; the ...
journal_title:Operative dentistry
pub_type: 杂志文章,随机对照试验
doi:10.2341/12-483-C
更新日期:2014-03-01 00:00:00
abstract::This study investigated the effect of two base materials with different elastic moduli (F2000 and Vitrebond) on the fracture load of machinable ceramic inlays. Standardized MOD cavities were prepared in 18 human maxillary first or second premolars. The teeth were randomly assigned to three groups of six premolars each...
journal_title:Operative dentistry
pub_type: 杂志文章,随机对照试验
doi:10.2341/05-3
更新日期:2006-03-01 00:00:00
abstract::This study evaluated the degree of conversion (%DC) of luting agents around ceramic inlays placed in deep natural cavities. Thirty-six cylindrical Class I cavities (diameter = 4 mm, depth = 4 mm) were prepared in freshly extracted human teeth and randomly divided according to the luting materials used for luting CAD/C...
journal_title:Operative dentistry
pub_type: 杂志文章,随机对照试验
doi:10.2341/10-012-L
更新日期:2010-09-01 00:00:00
abstract::Provisional restorations of full crown preparations may permit more microleakage of bacteria and their products than the final castings do. However, most investigations of the sealing qualities of cemented castings have reported that they too permit dye leakage. One approach to the problem is to seal the dentin with d...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:1992-01-01 00:00:00
abstract::This study investigated the effects of an at-home bleaching gel containing 15% carbamide peroxide on the susceptibility of tooth-colored restorative materials to different staining solutions. The tooth-colored restoratives used in this study were a nano resin composite (Filtek Z350), a packable resin composite (Filtek...
journal_title:Operative dentistry
pub_type: 杂志文章,随机对照试验
doi:10.2341/08-42
更新日期:2009-01-01 00:00:00
abstract::The effect of microabrasion on human enamel has been well documented; however, no information is available on its effect on dentin or restorative materials. The purpose of this study was to evaluate the effect of the microabrasion technique on the surface roughness of restorative materials and enamel and dentin surfac...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:1996-03-01 00:00:00
abstract:OBJECTIVE::The study aimed to evaluate teaching trends and use of materials in direct posterior restorations during a 13-year period in an Israeli dental school. METHODS::Data registered in computerized files, relating to posterior restorations performed in the student clinic during the past 13 years (2004-2016), were...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/17-361-C
更新日期:2018-11-01 00:00:00
abstract::The aim of this investigation was to verify the influence of 3 light curing units on the degree of conversion, using different irradiation conditions: 1) manufacturers' recommended times of photo-activation, 2) standardizing total energy density among the units and 3) standardizing energy density at the 450-490 nm wav...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/05-81
更新日期:2006-07-01 00:00:00
abstract:OBJECTIVE:The purpose of this study was to evaluate surface finish and gloss of a two-step composite finishing/polishing (F/P) disc system compared with two multistep systems on five composites. METHODS:Seventy-five disc-shaped composite specimens (D=10.0 mm, 2 mm thick, n=15 per composite) were made of microfill (Dur...
journal_title:Operative dentistry
pub_type: 杂志文章,随机对照试验
doi:10.2341/10-162-L
更新日期:2011-03-01 00:00:00
abstract::This case report illustrates how to restore severely compromised teeth with direct composite restorations. The size of the restorations presented is often considered by dentists as being a contraindication for direct composites. Hence, the technique is explained step by step, addressing the crucial points. ...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/15-001-T
更新日期:2016-09-01 00:00:00
abstract::The available and proposed methods for determining the in vivo occlusal wear values of classes 1 and 2 restorations made of resinfilled composite materials are critically reviewed. A methodology to be used to address the fundamental question of the link between the wear of the in vivo restorations and the relevant mec...
journal_title:Operative dentistry
pub_type: 杂志文章,评审
doi:
更新日期:1991-03-01 00:00:00
abstract:STATEMENT OF THE PROBLEM:Precise shade matching can be one of the most difficult tasks for the dentist and some variables may influence the process of shade comparison. PURPOSE OF THE STUDY:This study tested the differences in shade perception between genders, the influence of the observer's clinical experience, and t...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/10-057-C
更新日期:2012-05-01 00:00:00
abstract::The objective of this paper is to review the literature concerning factors affecting adhesion to mineralized tissues. Factors related to the physicochemical structure of the adherents and to the inherent properties of composite restorative materials, along with the postulated bonding mechanisms of current adhesive sys...
journal_title:Operative dentistry
pub_type: 杂志文章,评审
doi:
更新日期:1992-01-01 00:00:00
abstract:OBJECTIVES:The aim of this study was to quantify the internal void volume formation in commercially available, resin composites inserted using conventional or sonic insertion methods, and analyzed using three-dimensional (3D) micro-computed tomography (μCT). METHODS AND MATERIALS:Four resin composites were evaluated: ...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/16-331-L
更新日期:2018-03-01 00:00:00
abstract::Retained primary teeth in the smile zone can cause patient dissatisfaction, especially if associated with malposition of teeth. Orthodontic and prosthetic treatment options to treat the situation may not be accepted by some patients. Therefore, these patients tend to maintain their primary teeth and seek different est...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/15-363-S
更新日期:2017-03-01 00:00:00
abstract:OBJECTIVES:This study aimed to assess the retention of metal copings luted to uremic teeth with five different luting agents. METHODS:A total of 35 sound natural molars was collected from uremic patients and randomly assigned into five groups (n=7). The teeth were prepared for metal copings using diamond tips and wate...
journal_title:Operative dentistry
pub_type: 杂志文章,随机对照试验
doi:10.2341/12-523-LR2
更新日期:2014-05-01 00:00:00
abstract::Although rare, subcutaneous air emphysema can occur during dental procedures such as endodontic treatment, surgical extractions, and preparing a tooth for an indirect or direct dental restoration. We report the development of a subcutaneous air emphysema that was introduced through the periodontal ligament of an untre...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/15-155-S
更新日期:2017-09-01 00:00:00
abstract:CLINICAL RELEVANCE:The degree of conversion of contemporary universal adhesives positively correlates with the bond strength to dentin. The correlation is more marked after thermocycling, suggesting that a high degree of conversion is required for long-term dentin bonding durability. SUMMARY:Purpose: The objectives of...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/19-165-L
更新日期:2020-09-01 00:00:00
abstract:INTRODUCTION:Limited access to interdental spaces complicates removal of excess material when placing class II composite resin restorations. Evidence-based recommendations on interproximal finishing are rare. We present novel microscalpels for this indication. The aim of the study was to test their fracture strength an...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/16-012-L
更新日期:2017-05-01 00:00:00
abstract::This study determined the effect of bleaching agents on the fracture toughness of composite materials. Four nanofilled resin composites were evaluated: Filtek Supreme Plus, Tetric EvoCeram, Premise and Esthet-X. Four concentrations of bleaching agents were tested: Opalescence PF 10%, 20%, 35% and 45%. Fifty specimens ...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/08-120-L
更新日期:2009-11-01 00:00:00
abstract:OBJECTIVES:Published transmission electron microscopy analysis of in vitro resin-dentin bonds shows that, after 44 months, almost 70% of collagen fibrils from the hybrid layer disappear. Matrix metalloproteinases (MMPs) play an important role in that process and are thought to be the main factor responsible for the sol...
journal_title:Operative dentistry
pub_type: 杂志文章,随机对照试验
doi:10.2341/12-425-L
更新日期:2014-03-01 00:00:00
abstract::The purpose of this study was to evaluate the 1-year results of the dentin bond (DBS)/viscous resin liner combinations Amalgambond Plus, Tenure/Panavia, Syntac/Dual Cem, and All-Bond 2/Liner F in reducing microleakage in class 5 cavity preparations restored with an admixed or a spherical amalgam alloy and to compare t...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:1998-01-01 00:00:00
abstract::This study evaluated the effects of acid etching of the enamel and the combination of different light sources (halogen light, light-emitting diodes [LEDs], and LED/Laser) and the bleaching product on color change, penetration of hydrogen peroxide (H2O2), and cytotoxicity over time. The color change (ΔE) and the amount...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/14-364-L
更新日期:2016-01-01 00:00:00
abstract::The aim of this review was to compile recent evidence related to nanofilled resin composite materials regarding the properties and clinical performance. Special attention was given to mechanical properties, such as strength, hardness, abrasive wear, water sorption, and solubility. The clinical performance of nanocompo...
journal_title:Operative dentistry
pub_type: 杂志文章,评审
doi:10.2341/17-208-T
更新日期:2018-07-01 00:00:00
abstract:OBJECTIVE:To evaluate the influence of chlorhexidine with different application methods on the microtensile bond strength (microTBS) to dentin in Class I cavities. METHODS:Flat dentinal surfaces with Class I cavities (4 mm long, 4 mm wide, 2 mm deep) in 50 molars were bonded with Adper Single Bond 2 etch-and-rinse adh...
journal_title:Operative dentistry
pub_type: 杂志文章,随机对照试验
doi:10.2341/09-360-L
更新日期:2010-11-01 00:00:00
abstract:OBJECTIVES:To evaluate the bond strength of adhesive luting agents applied to caries-affected dentin (CAD). METHODS:Thirty-six noncarious human third molars were abraded to expose an occlusal dentin surface. Caries lesions were induced in half of the samples using a microcosm biofilm model. Biofilm was cultivated unde...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/14-169-L
更新日期:2015-05-01 00:00:00
abstract::This study determined the degree of conversion of two LED (light-emitting diodes) (Elipar FreeLight [FL], 3M ESPE; GC e-Light [EL], GC), a high intensity (Elipar TriLight [TL], 3M ESPE) and a very high intensity (Astralis 10 [AS], Ivoclar Vivadent) halogen light. The degree of conversion of these lights was compared t...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:2004-09-01 00:00:00
abstract::This study compared the post-gel contraction of two "low-shrinkage" composites (InTen-S [IS], Ivoclar-Vivadent; Aelite LS [AL], BISCO Inc) and an ormocer (Admira [AM], Voco) to two conventional mini-filled composites (Renew [RN], BISCO; Z100 [ZO], 3M ESPE). A strain-monitoring device and test configuration were used t...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:2004-03-01 00:00:00
abstract::This study evaluated the shear-bond strength of 11 luting cements from different material classes to manufactured pre-treated zirconia ceramics (Lava: 97% ZrO2, stabilized with 3% Y2O3). In addition, the influence of the curing method on shear-bond strength was investigated. The cements examined were one zinc-phosphat...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:2005-05-01 00:00:00
abstract::The aim of this study was to evaluate the effect of grinding with diamond burs and low-temperature aging on the material surface characteristics and bacteria adhesion on a yttrium-stabilized tetragonal zirconia polycrystalline (Y-TZP) surface. Y-TZP specimens were made from presintered blocks, sintered as recommended ...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/16-108-L
更新日期:2017-11-01 00:00:00