Preparation and characterization of PEGylated amylin.

Abstract:

:Amylin is a pancreatic hormone that plays important roles in overall metabolism and in glucose homeostasis. The therapeutic restoration of postprandial and basal amylin levels is highly desirable for patients with diabetes who need to avoid glucose excursions. Protein conjugation with polyethylene glycol (PEG) has long been known to be a convenient approach for extending the biological effects of biopharmaceuticals. We have investigated the reactivity of amylin with methoxy polyethylene glycol succinimidyl carbonate and methoxy polyethylene glycol succinimidyl propionate, which have an average molecular weight of 5 kDa. The reaction, which was conducted in both aqueous and organic (dimethyl sulfoxide) solvents, occurred within a few minutes and resulted in at least four detectable products with distinct kinetic phases. These results suggest a kinetic selectivity for PEGylation by succinimidyl derivatives; these derivatives exhibit enhanced reactivity with primary amine groups, as indicated by an evaluation of the remaining amino groups using fluorescamine. The analysis of tryptic fragments from mono- and diPEGylated amylin revealed that conjugation occurred within the 1-11 amino acid region, most likely at the two amine groups of Lys(1). The reaction products were efficiently separated by C-18 reversed phase chromatography. Binding assays confirmed the ability of mono- and diPEGylated amylin to interact with the amylin co-receptor receptor activity-modifying protein 2. Subcutaneous administration in mice revealed the effectiveness of monoPEG-amylin and diPEG-amylin in reducing glycemia; both compounds exhibited prolonged action compared to unmodified amylin. These features suggest the potential use of PEGylated amylin to restore basal amylin levels.

journal_name

AAPS PharmSciTech

journal_title

AAPS PharmSciTech

authors

Guerreiro LH,Guterres MF,Melo-Ferreira B,Erthal LC,Rosa Mda S,Lourenço D,Tinoco P,Lima LM

doi

10.1208/s12249-013-9987-4

subject

Has Abstract

pub_date

2013-09-01 00:00:00

pages

1083-97

issue

3

issn

1530-9932

journal_volume

14

pub_type

杂志文章
  • Membrane Rigidity Determined by Atomic Force Microscopy Is a Parameter of the Permeability of Liposomal Membranes to the Hydrophilic Compound Calcein.

    abstract::We determined the permeability coefficient of a model hydrophilic drug, calcein, encapsulated within saturated lipid-based nano-sized liposomes of various lipid profiles. We demonstrated that the addition of cholesterol to liposomes containing saturated lipids increased the permeability of the liposomal membrane to ca...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-016-0624-x

    authors: Takechi-Haraya Y,Sakai-Kato K,Goda Y

    更新日期:2017-07-01 00:00:00

  • Highly Soluble Glimepiride and Irbesartan Co-amorphous Formulation with Potential Application in Combination Therapy.

    abstract::One-third of the population of the USA suffers from metabolic syndrome (MetS). Treatment of patients with MetS regularly includes drugs prescribed simultaneously to treat diabetes and cardiovascular diseases. Therefore, the development of novel multidrug formulations is recommended. However, the main problem with thes...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-019-1359-2

    authors: Cruz-Angeles J,Videa M,Martínez LM

    更新日期:2019-03-18 00:00:00

  • The studies of phase equilibria and efficiency assessment for self-emulsifying lipid-based formulations.

    abstract::The study was designed to build up a database for the evaluation of the self-emulsifying lipid formulations performance. A standard assessment method was constructed to evaluate the self-emulsifying efficiency of the formulations based on five parameters including excipients miscibility, spontaneity, dispersibility, h...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-012-9773-8

    authors: Shahba AA,Mohsin K,Alanazi FK

    更新日期:2012-06-01 00:00:00

  • Polyethylene Oxide (PEO) Molecular Weight Effects on Abuse-Deterrent Properties of Matrix Tablets.

    abstract::While polyethylene oxide (PEO)-based matrix tablets are frequently used as abuse-deterrent dosage forms, there is limited information available regarding how the selection of formulation components and manufacturing processes affect the resulting abuse-deterrent properties. The objective of the current study was to ev...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-019-1565-y

    authors: Meruva S,Donovan MD

    更新日期:2019-12-19 00:00:00

  • A novel fiber-optic photometer for in situ stability assessment of concentrated oil-in-water emulsions.

    abstract::The purpose of this research was to evaluate a novel fiber-optic photometer for its ability to monitor physical instabilities occurring in concentrated emulsions during storage. For this, the fiber-optic photometer was used to measure transmission of oil-in-water emulsions stabilized with hypromellose (HPMC) as a func...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/pt0803070

    authors: Oliczewski S,Daniels R

    更新日期:2007-08-31 00:00:00

  • PD-1 siRNA-Encapsulated Solid Lipid Nanoparticles Downregulate PD-1 Expression by Macrophages and Inhibit Tumor Growth : PD-1 siRNA-Encapsulated Solid Lipid Nanoparticles.

    abstract::The present study was designed to test the hypothesis that programmed cell death-1 (PD-1) siRNA can downregulate PD-1 expression in macrophages in culture and in tumor tissues in mice and inhibit tumor growth in a mouse model. PD-1 siRNA was encapsulated in solid lipid nanoparticles (SLNs), and the physical properties...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-021-01933-y

    authors: Hanafy MS,Hufnagel S,Trementozzi AN,Sakran W,Stachowiak JC,Koleng JJ,Cui Z

    更新日期:2021-01-31 00:00:00

  • Nucleic Acid-Based Therapeutics for Pulmonary Diseases.

    abstract::Nucleic acid-based therapeutics present huge potential in the treatment of pulmonary diseases ranging from lung cancer to asthma and chronic pulmonary diseases, which are often fatal and widely prevalent. The susceptibility of nucleic acids to degradation and the complex structure of lungs retard the effective pulmona...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章,评审

    doi:10.1208/s12249-018-1183-0

    authors: Chen J,Tang Y,Liu Y,Dou Y

    更新日期:2018-11-01 00:00:00

  • 3D-Printed Isoniazid Tablets for the Treatment and Prevention of Tuberculosis-Personalized Dosing and Drug Release.

    abstract::The aim of the present work was to produce 3D-printed oral dosage forms with a sufficient drug dose displaying various release profiles. Hot-melt extrusion was utilized to produce drug-loaded feedstock material that was subsequently 3D-printed into 6, 8, and 10 × 2.5 mm tablets with 15% and 90% infill levels. The prep...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-018-1233-7

    authors: Öblom H,Zhang J,Pimparade M,Speer I,Preis M,Repka M,Sandler N

    更新日期:2019-01-07 00:00:00

  • Development and characterization of sorbitan monostearate and sesame oil-based organogels for topical delivery of antimicrobials.

    abstract::The current study explains the development of sorbitan monostearate and sesame oil-based organogels for topical drug delivery. The organogels were prepared by dissolving sorbitan monostearate in sesame oil (70°C). Metronidazole was used as a model antimicrobial. The formulations were characterized using phase contrast...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-014-0223-7

    authors: Singh VK,Pramanik K,Ray SS,Pal K

    更新日期:2015-04-01 00:00:00

  • Characterizing and Exploring the Differences in Dissolution and Stability Between Crystalline Solid Dispersion and Amorphous Solid Dispersion.

    abstract::Solid dispersion is one of the most effective ways to improve the dissolution of insoluble drugs. When the carrier can highly disperse the drug, it will increase the wettability of the drug and reduce the surface tension, thus improving the solubility, dissolution, and bioavailability. However, amorphous solid dispers...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-020-01802-0

    authors: Wang X,Zhang L,Ma D,Tang X,Zhang Y,Yin T,Gou J,Wang Y,He H

    更新日期:2020-09-25 00:00:00

  • Formulation and in vitro evaluation of xanthan gum or carbopol 934-based mucoadhesive patches, loaded with nicotine.

    abstract::Bilayer nicotine mucoadhesive patches were prepared and evaluated to determine the feasibility of the formulation as a nicotine replacement product to aid in smoking cessation. Nicotine patches were prepared using xanthan gum or carbopol 934 as a mucoadhesive polymers and ethyl cellulose as a backing layer. The patche...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-010-9534-5

    authors: Abu-Huwaij R,Obaidat RM,Sweidan K,Al-Hiari Y

    更新日期:2011-03-01 00:00:00

  • Behavior of freezable bound water in the bacterial cellulose produced by Acetobacter xylinum: an approach using thermoporosimetry.

    abstract::The aim of the study is to examine thermal behavior of water within reticulated structure of bacterial cellulose (BC) films by sub-ambient differential scanning calorimetry (DSC). BC films with different carbon source, either manitol (BC (a)) or glycerol (BC (b)), were produced by Acetobacter xylinum using Hestrin and...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-008-9104-2

    authors: Kaewnopparat S,Sansernluk K,Faroongsarng D

    更新日期:2008-01-01 00:00:00

  • Characterization of Controlled Release Microspheres Using FIB-SEM and Image-Based Release Prediction.

    abstract::For polymer-based controlled release drug products (e.g. microspheres and implants), active pharmaceutical ingredient distribution and microporosity inside the polymer matrix are critical for product performance, particularly drug release kinetics. Due to the decreasing domain size and increasing complexity of such pr...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-020-01741-w

    authors: Zhang S,Wu D,Zhou L

    更新日期:2020-07-14 00:00:00

  • Design and Characterization of Metformin-Loaded Solid Lipid Nanoparticles for Colon Cancer.

    abstract::Colorectal cancer is a global concern, and its treatment is fraught with non-selective effects including adverse side effects requiring hospital visits and palliative care. A relatively safe drug formulated in a bioavailability enhancing and targeting delivery platform will be of significance. Metformin-loaded solid l...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-016-0505-3

    authors: Ngwuluka NC,Kotak DJ,Devarajan PV

    更新日期:2017-02-01 00:00:00

  • Co-solvent evaporation method for enhancement of solubility and dissolution rate of poorly aqueous soluble drug simvastatin: in vitro-in vivo evaluation.

    abstract::A number of synthesized chemical molecules suffer from low aqueous solubility problems. Enhancement of aqueous solubility, dissolution rate, and bioavailability of drug is a very challenging task in drug development. In the present study, solubility and dissolution of poorly aqueous soluble drug simvastatin (SIM) was ...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-008-9176-z

    authors: Pandya P,Gattani S,Jain P,Khirwal L,Surana S

    更新日期:2008-01-01 00:00:00

  • Metal-Catalyzed Oxidation and Photo-oxidation of Glucagon.

    abstract::The oxidation of glucagon by the H2O2/Cu(2+) system and by simulated sunlight was studied using HPLC-MS methodologies. It was found that copper ion-catalyzed oxidation is much faster in the residue 1-12 region than in photo-oxidation, but it is slower than photo-oxidation in the residue 18-29 region. This difference i...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-015-0418-6

    authors: Zhang J

    更新日期:2016-08-01 00:00:00

  • Studies on transdermal delivery enhancement of zidovudine.

    abstract::The purpose of this study was to investigate physicochemical characteristics and in vitro release of zidovudine from monolithic film of Eudragit RL 100 and ethyl cellulose. Films included 2.5% or 5% (w/w) zidovudine of the dry polymer weight were prepared in various ratios of polymers by solvent evaporation method fro...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-008-9179-9

    authors: Takmaz EA,Inal O,Baykara T

    更新日期:2009-01-01 00:00:00

  • Tunable Properties of Poly-DL-Lactide-Monomethoxypolyethylene Glycol Porous Microparticles for Sustained Release of Polyethylenimine-DNA Polyplexes.

    abstract::Direct pulmonary delivery is a promising step in developing effective gene therapies for respiratory disease. Gene therapies can be used to treat the root cause of diseases, rather than just the symptoms. However, developing effective therapies that do not cause toxicity and that successfully reach the target site at ...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-018-1215-9

    authors: Terry TL,Givens BE,Rodgers VGJ,Salem AK

    更新日期:2019-01-02 00:00:00

  • Quantification of mass transfer during spheronisation.

    abstract::Spherical granules (pellets) are quite useful in many pharmaceutical applications. The extrusion spheronisation technique is well established as a method of producing pellets of a spherical shape and narrow size distribution. After the extrusion, the cylindrical extrudates are transformed to spherical pellets by spher...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-012-9770-y

    authors: Koester M,Thommes M

    更新日期:2012-06-01 00:00:00

  • Polymer-based sustained-release dosage forms for protein drugs, challenges, and recent advances.

    abstract::While the concept of using polymer-based sustained-release delivery systems to maintain therapeutic concentration of protein drugs for extended periods of time has been well accepted for decades, there has not been a single product in this category successfully commercialized to date despite clinical and market demand...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章,评审

    doi:10.1208/s12249-008-9148-3

    authors: Wu F,Jin T

    更新日期:2008-01-01 00:00:00

  • Emerging freeze-drying process development and scale-up issues.

    abstract::Although several guidelines do exist for freeze-drying process development and scale-up, there are still a number of issues that require additional attention. The objective of this review article is to discuss some emerging process development and scale-up issue with emphasis on effect of load condition and freeze-dry...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章,评审

    doi:10.1208/s12249-011-9599-9

    authors: Patel SM,Pikal MJ

    更新日期:2011-03-01 00:00:00

  • Polymeric micelles of PEG-PE as carriers of all-trans retinoic acid for stability improvement.

    abstract::The topical application of all-trans retinoic acid (ATRA) is an effective treatment for several skin disorders, including photo-aging. Unfortunately, ATRA is susceptible to light, heat, and oxidizing agents. Thus, this study aimed to investigate the ability of polymeric micelles prepared from polyethylene glycol conju...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-011-9749-0

    authors: Wichit A,Tangsumranjit A,Pitaksuteepong T,Waranuch N

    更新日期:2012-03-01 00:00:00

  • Thermally Induced Denaturing Energetics of Human Blood Plasma Albumin by Differential Scanning Calorimetry (DSC) as an Indicator for Breast Cancer Diagnosis in Female Patients.

    abstract::Cancerous invasion yields unusual metabolisms providing a significant amount of peptide albuminomes that modulate albumin stability via binding. The study aimed at the investigation of the thermal stability of human plasma albumin with breast cancer of various stages by means of differential scanning calorimetry (DSC)...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-019-1356-5

    authors: Faroongsarng D,Sunpaweravong S,Raksawong A

    更新日期:2019-03-18 00:00:00

  • Human Serum Albumin, a Suitable Candidate to Stabilize Freeze-Dried IgG in Combination with Trehalose: Central Composite Design.

    abstract::Freeze-dried immunoglobulin G (IgG) incorporating trehalose and human serum albumin (HSA) was statistically evaluated regarding the existence of synergism between additives on the stability profile. The levels of HSA (X1) and trehalose (X2) were independent variables. Aggregation following the process (Y1), after 2 an...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-019-1509-6

    authors: Nouraei MS,Faghihi H,Najafabadi AR,Zadeh AHM,Darabi M,Vatanara A

    更新日期:2019-10-28 00:00:00

  • Effect of hydrophilic polymers on buccoadhesive Eudragit patches of propranolol hydrochloride using factorial design.

    abstract::The purpose of this study was to develop formulations and systematically evaluate in vitro performances of buccoadhesive patches of propranolol hydrochloride using the hydrophobic polymer Eudragit L-100 as the base matrix. The hydrophilic polymers Carbopol 934 and polyvinyl pyrrolidone (PVP) K30 were incorporated into...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/pt0802045

    authors: Patel VM,Prajapati BG,Patel MM

    更新日期:2007-06-22 00:00:00

  • Estimating the number of droplets and drug particles emitted from MDIs.

    abstract::The objective of this paper is to assess the number of drug particles or droplets contained in metered dose inhaler (MDI) aerosols. Equations were developed to estimate this. The number of drug particles was estimated to be as high as about 300 million for QVAR solution MDIs and as low as 670,000 for Beclovent MDIs. T...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-007-9006-8

    authors: Stein SW

    更新日期:2008-01-01 00:00:00

  • Intraoral film containing insulin-phospholipid microemulsion: formulation and in vivo hypoglycemic activity study.

    abstract::Non-invasive administration of insulin is expected for better diabetes mellitus therapy. In this report, we developed intraoral preparation for insulin. Insulin was encapsulated into nanocarrier using self-assembly emulsification process. To increase lipophilicity of insulin, it was dispersed in phospholipid resulted ...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-014-0258-9

    authors: Rachmawati H,Haryadi BM,Anggadiredja K,Suendo V

    更新日期:2015-06-01 00:00:00

  • Kolliphor® HS 15 Micelles for the Delivery of Coenzyme Q10: Preparation, Characterization, and Stability.

    abstract::To enhance the stability of coenzyme Q10 (CoQ10), Kolliphor® HS 15 (HS15) was employed as a carrier to build up a stable CoQ10-loaded micelle delivery system. The impact of micellar compositions, the preparation condition, and the preparation method on size characteristics, the solubilization efficiency, and micellar ...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-015-0399-5

    authors: Liu L,Mao K,Wang W,Pan H,Wang F,Yang M,Liu H

    更新日期:2016-06-01 00:00:00

  • Pulmonary Administration of Microparticulate Antisense Oligonucleotide (ASO) for the Treatment of Lung Inflammation.

    abstract::Targeted delivery to the lung for controlling lung inflammation is an area that we have explored in this study. The purpose was to use microparticles containing an antisense oligonucleotide (ASO) to NF-κB to inhibit the production of proinflammatory cytokines. Microparticles were prepared using the B-290 Buchi Spray D...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-018-1002-7

    authors: Ubale RV,Shastri PN,Oettinger C,D'Souza MJ

    更新日期:2018-05-01 00:00:00

  • Formulation Optimization of Selective Laser Sintering 3D-Printed Tablets of Clindamycin Palmitate Hydrochloride by Response Surface Methodology.

    abstract::The aims of the current study were to develop and evaluate clindamycin palmitate hydrochloride (CPH) 3D-printed tablets (printlets) manufactured by selective laser sintering (SLS). Optimization of the formulation was performed by studying the effect of formulation and process factors on critical quality attributes of ...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-020-01775-0

    authors: Mohamed EM,Barakh Ali SF,Rahman Z,Dharani S,Ozkan T,Kuttolamadom MA,Khan MA

    更新日期:2020-08-13 00:00:00