Abstract:
:Ultrasonic modes guided along the surface of a concrete block covered by a composite plate are investigated. First of all, the propagation phenomenon is studied by predicting the dispersion curves for various modes supposed to exist in this structure. Then, focus is made on a specific mode expected to be sensitive to the quality of the bond between the concrete and the composite, according to its through-thickness displacement field. Its dispersion curve is re-plotted for various states of this bond, which is modelled as a thin layer with varying properties. Limit cases corresponding to total disbond and perfect bond are considered. Experiments are then made on two composite-concrete assemblies for these two extreme cases using a contact PZT transmitter and an air-coupled receiver system. The phase velocities are in good agreement with the predicted dispersion curves, thus showing the potential of the ultrasonic guided mode to control the quality of bonds in such structures.
journal_name
Ultrasonicsjournal_title
Ultrasonicsauthors
Castaings M,Hosten B,François Ddoi
10.1016/j.ultras.2004.01.074subject
Has Abstractpub_date
2004-04-01 00:00:00pages
1067-71issue
1-9eissn
0041-624Xissn
1874-9968pii
S0041624X04000824journal_volume
42pub_type
杂志文章相关文献
ULTRASONICS文献大全abstract::Sonothrombolysis is one of the most feasible methods for enhancing clot lysis with a recombinant tissue plasminogen activator (rt-PA) in cases of acute ischemic strokes. For safe and efficient clinical practices of sonothrombolysis, accurate estimation of ultrasound transmittance through the human skull is critical. P...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2017.02.012
更新日期:2017-05-01 00:00:00
abstract::This research paper is the experimental study to investigate the effect of ultrasound sensitivity in the pure methane gas space as the pressure and sensor distance increases. We offer the solution to overcome the low sensitivity characteristics of ultrasonic sensors in the methane gas space. This proposal shows the ph...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2019.105970
更新日期:2019-11-01 00:00:00
abstract::A numerical study is carried out of the surface acoustic wave generation by a bulk acoustic wave in a half-infinite anisotropic half-space without piezoeffect. The efficient conversion of bulk waves into surface waves occurs due to a grating area created on the surface of the substrate. Our simulations are fully based...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2013.01.007
更新日期:2013-07-01 00:00:00
abstract::Investigation was carried out to study the effects of maximum aggregate size (MAS) (12.5mm, 19.0mm, 25.0mm, 37.5mm, and 50.0mm) on ultrasonic pulse velocity (UPV) of concrete. For investigation, first class bricks were collected and broken to make coarse aggregate. The aggregates were tested for specific gravity, abso...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2016.04.006
更新日期:2016-07-01 00:00:00
abstract::In the food industry, ultrasonic cutting is used to improve separation by a reduction of the cutting force. This reduction can be attributed to the modification of tool-workpiece interactions at the cutting edge and along the tool flanks because of the superposition of the cutting movement with ultrasonic vibration of...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2009.03.001
更新日期:2009-06-01 00:00:00
abstract::Ultrasound evaluation permits the state of rocks to be determined quickly and cheaply, satisfying the demands faced by today's producers of ornamental stone, such as environmental sustainability, durability and safety of use. The basic objective of the present work is to analyse and develop the usefulness of ultrasoun...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2013.06.006
更新日期:2014-01-01 00:00:00
abstract::Although, high resolution, real-time ultrasonic (US) imaging is routinely available, image interpretation is based on grey-level and texture and quantitative evaluation is limited. Other potentially useful diagnostic information from US echoes may include modifications in tissue acoustic parameters (speed, attenuation...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2004.09.002
更新日期:2005-03-01 00:00:00
abstract::A laser-based technique for the contact-free generation and detection of strongly nonlinear surface acoustic wave (SAW) pulses with amplitudes limited by the materials strength has been developed. The effects of nonlinear propagation of short elastic surface pulses with finite strength in isotropic solids, such as fus...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2008.06.002
更新日期:2008-11-01 00:00:00
abstract::In this paper, te edge mode variation is studied with three different methods: the reciprocal work method, already used by Torvik [J. Acoust. Soc. Am. 41 (1967) 346] to model this phenomenon, the S-parameter method and a finite element model that are applied for the first time to the study of the edge resonance. Moreo...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/s0041-624x(02)00391-8
更新日期:2003-01-01 00:00:00
abstract::This paper suggests a method for high-sensitivity damage detection. The method is based on pitch-catch measurements of Lamb waves combined with a baseline subtraction technique in the frequency-wavenumber domain. Small amplitude converted modes, generated during the interaction of propagating waves with damage, can th...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2013.08.010
更新日期:2014-02-01 00:00:00
abstract::Molecular techniques are transforming our understanding of cellular function and disease. However, accurate molecular analysis methods will be limited if the input DNA, RNA, or protein is not derived from pure population of cells or is contaminated by the wrong cells. A novel Ultrasonic Vibration Micro-dissection (UVM...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2006.06.010
更新日期:2006-12-22 00:00:00
abstract::Effective receive beamforming in medical ultrasound imaging is important for enhancing spatial and contrast resolution. In current ultrasound receive beamforming, a constant sound speed (e.g., 1540m/s) is assumed. However, the variations of sound speed in soft tissues could introduce phase distortions, leading to degr...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2011.03.007
更新日期:2011-10-01 00:00:00
abstract::In this paper the behaviour of strongly nonlinear waves in axisymmetric resonators is experimentally and numerically studied. Experiments are carried out in a cylindrical cavity, which transversal dimension is bigger than the longitudinal one, excited by a narrow band transducer. The quality factor and displacement am...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2005.02.001
更新日期:2005-08-01 00:00:00
abstract::Exposure of Petunia hybrida cell suspensions to ultrasound at a frequency of 2.43 MHz in a standing wave field at an energy density of 70 Jm-3 (pressure amplitude of 0.78 MPa) decreased their mean viability to 35% after 20 min of sonication. A comparison of propagating wave and standing wave treatments at equal freque...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/s0041-624x(99)00166-3
更新日期:2000-03-01 00:00:00
abstract::Features of an acoustic energy trapping and outflow in a High-overtone Bulk Acoustic Resonator (HBAR) were considered. On the example of a specified resonator based on a piezoelectric layered structure (PLS) as "Al/AlN/Mo/(100) diamond", the simulation of the propagation of microwave acoustic waves in the range of 10-...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2020.106311
更新日期:2021-03-01 00:00:00
abstract::In most of industries as aeronautics, aerospace and nuclear, the main part of the ultrasonic testing is carried out directly in touch with the inspected component. Among others, the cooling piping of French pressurized water reactor comprises many welding components with complex geometry: elbows, butt welds, nozzles. ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/s0041-624x(02)00145-2
更新日期:2002-05-01 00:00:00
abstract::The wear behaviors of grinding wheel have significant influence on the work-surface topography. However, a comprehensive and quantitative method is lacking for evaluating the wear conditions of grinding wheel. In this paper, a fractal analysis method is used to investigate the wear behavior of resin-bonded diamond whe...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2017.10.012
更新日期:2018-03-01 00:00:00
abstract::This will be a discussion of the non-invasive determination of the viscosity of a non-Newtonian fluid in laminar pipe flow over the range of shear rates present in the pipe. The procedure used requires knowledge of the flow profile in and the pressure drop along a long straight run of pipe. The profile is determined b...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2006.05.027
更新日期:2006-12-22 00:00:00
abstract::Experimentally observed dissipated nonlinearity in Lamb wave propagation in composites due to stress-relaxation is reported herein. It was found that the stress relaxation in composite is inherently coupled with the second order nonlinear parameter derived from the Lamb wave modes. Due to the combined effect of intern...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2019.01.002
更新日期:2019-07-01 00:00:00
abstract::Development of acoustic source localization techniques in anisotropic plates has gained attention in the recent past and still has scope of improvement. Most of such techniques existing in the literature either require known material properties or assume a straight line propagation of wave energy from the acoustic sou...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2019.105977
更新日期:2020-01-01 00:00:00
abstract::The results of experimental and theoretical studies of nonlinear acoustic phenomena (amplitude-dependent losses, resonant frequency shifts, damping of weak ultrasonic pulses and their carrier frequency phase delay under action of a powerful low-frequency pumping wave as well as amplitude-phase self-action of the finit...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2013.07.008
更新日期:2014-02-01 00:00:00
abstract::Although ultrasonic energy is widely used cleaning and degreasing of parts and assemblies in automotive and other industries, the use of ultrasonic energy in an industrial scale for textile washing is very new. This is due to the complexity of controlling the combination of chemical and mechanical effects, whereas wit...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2004.02.005
更新日期:2004-04-01 00:00:00
abstract::In medical ultrasound imaging, dynamic range (DR) is defined as the difference between the maximum and minimum values of the displayed signal to display and it is one of the most essential parameters that determine its image quality. Typically, DR is given with a fixed value and adjusted manually by operators, which l...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2014.09.012
更新日期:2015-02-01 00:00:00
abstract::Surface and quasi-longitudinal acoustic wave properties have been investigated in potassium titanyl arsenate (KTiOAsO₄, KTA) single crystals for the first time. Surface acoustic wave (SAW) velocity, electromechanical coupling coefficient and power flow angle characteristics have been obtained in rotated Y-cut of KTA c...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2013.09.019
更新日期:2014-02-01 00:00:00
abstract::The propagation of thickness shear waves in a periodically corrugated quartz crystal plate is investigated in the present paper using a power series expansion technique. In the proposed simulation model, an equivalent continuity of shear stress moment is introduced as an approximation to handle sectional interfaces wi...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2017.02.004
更新日期:2017-05-01 00:00:00
abstract::The acceptance of broadband ultrasound attenuation (BUA) for the assessment of osteoporosis suffers from a limited understanding of both ultrasound wave propagation through cancellous bone and its exact dependence upon the material and structural properties. It has recently been proposed that ultrasound wave propagati...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2015.09.009
更新日期:2016-02-01 00:00:00
abstract::Speckle tracking methods overcome the major limitations of current Doppler methods for flow imaging and quantification: angle dependence and aliasing. In this paper, we review the development of speckle tracking, with particular attention to the advantages and limitations of two-dimensional algorithms that use a singl...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/s0041-624x(99)00182-1
更新日期:2000-03-01 00:00:00
abstract::This paper deals with the influence of gas law on ultrasonic behaviour of porous media when the saturating fluid is high pressured. Previous works have demonstrated that ultrasonic transmission through a porous sample with variations of the static pressure (up to 18 bars) of the saturating fluid allows the characteriz...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2010.02.003
更新日期:2010-06-01 00:00:00
abstract::In this newly developed method, the ultrasonic diagnosis has become quantitative. The data will remain quantitative so far as an image storage tube is used. With the conventional storage type CRT, it is impossible to memorize the reflected echo signals of different strength levels. But with our method, it becomes poss...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/0041-624x(75)90036-0
更新日期:1975-09-01 00:00:00
abstract::The purpose of this study is to evaluate whether a 5-repetition liver stiffness (LS) measurement as the standard protocol of shear wave elastography (SWE) is comparable to a conventional 10-repetition measurement protocol and to identify factors that influence the reliability of the 5-repetition protocol. A total of 3...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2016.08.005
更新日期:2016-12-01 00:00:00