Abstract:
UNLABELLED:Although attenuated malaria parasitized red blood cells (pRBCs) are promising vaccine candidates, their application in humans may be restricted for ethical and regulatory reasons. Therefore, we developed an organic microparticle-based delivery platform as a whole parasite malaria-antigen carrier to mimic pRBCs. Killed blood stage parasites were encapsulated within liposomes that are targeted to antigen presenting cells (APCs). Mannosylated lipid core peptides (MLCPs) were used as targeting ligands for the liposome-encapsulated parasite antigens. MLCP-liposomes, but not unmannosylated liposomes, were taken-up efficiently by APCs which then significantly upregulated expression of MHC-ll and costimulatory molecules, CD80 and CD86. Two such vaccines using rodent model systems were constructed - one with Plasmodium chabaudi and the other with P. yoelii. MLCP-liposome vaccines were able to control the parasite burden and extended the survival of mice. Thus, we have demonstrated an alternative delivery system to attenuated pRBCs with similar vaccine efficacy and added clinical advantages. Such liposomes are promising candidates for a human malaria vaccine. STATEMENT OF SIGNIFICANCE:Attenuated whole parasite-based vaccines, by incorporating all parasite antigens, are very promising candidates, but issues relating to production, storage and safety concerns are significantly slowing their development. We therefore developed a semi-synthetic whole parasite malaria vaccine that is easily manufactured and stored. Two such prototype vaccines (a P. chabaudi and a P. yoelii vaccine) have been constructed. They are non-infectious, highly immunogenic and give good protection profiles. This semi-synthetic delivery platform is an exciting strategy to accelerate the development of a licensed malaria vaccine. Moreover, this strategy can be potentially applied to a wide range of pathogens.
journal_name
Acta Biomaterjournal_title
Acta biomaterialiaauthors
Giddam AK,Reiman JM,Zaman M,Skwarczynski M,Toth I,Good MFdoi
10.1016/j.actbio.2016.08.020subject
Has Abstractpub_date
2016-10-15 00:00:00pages
295-303eissn
1742-7061issn
1878-7568pii
S1742-7061(16)30416-0journal_volume
44pub_type
杂志文章abstract::Wound infections are a significant clinical problem affecting millions of people worldwide. Topically applied antibacterial formulations with longer residence time and controlled antimicrobial release would offer significant benefits for improved prevention and treatment of infected wounds. In this study, we developed...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2019.12.014
更新日期:2020-02-01 00:00:00
abstract::Human enamel has been found to be a coating with excellent mechanical performance, and has undergone extensive investigation and discussion. However, most of the reported studies consider the enamel as a homogeneous anisotropic biocomposite. The current study illustrated the graded properties of the biocomposite from ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2012.12.029
更新日期:2013-05-01 00:00:00
abstract::The proliferation epidermal growth factor (EGF) is known to acquire contradictory apoptotic activities upon conjugation with gold nanoparticles (GNPs) through hitherto unknown mechanisms. Here, we identified an essential role of membrane rafts in the drastic activity switching of EGF-GNPs through the following intrace...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2019.02.026
更新日期:2019-04-01 00:00:00
abstract::Degradation characteristics in response to electron beam sterilization of designed and biodegradable aliphatic polyester scaffolds are relevant for clinically successful synthetic graft tissue regeneration. Scaffold degradation in vitro and in vivo were documented and correlated to the macroscopic structure and chemic...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2011.02.011
更新日期:2011-05-01 00:00:00
abstract::The understanding of corrosion processes of metal implants in the human body is a key problem in modern biomaterial science. Because of the complicated and adjustable in vivo environment, in vitro experiments require the analysis of various physiological corrosion media to elucidate the underlying mechanism of "biolog...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2011.03.004
更新日期:2011-06-01 00:00:00
abstract::Hydrogels have shown great potential for cartilage tissue engineering applications due to their capability to encapsulate cells within biomimetic, 3-dimensional (3D) microenvironments. However, the multi-step fabrication process that is necessary to produce cell/scaffold constructs with defined dimensions, limits thei...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2017.11.020
更新日期:2018-01-15 00:00:00
abstract::Tissues in the intervertebral disc have a large capacity to absorb water, partially due to the high glycosaminoglycan (GAG) content, which decreases linearly from the nucleus pulposus (NP) in the center to the outer annulus. Our recent work showed that fiber network and GAG distribution contributes to development of r...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2019.09.035
更新日期:2019-12-01 00:00:00
abstract::The development of polyelectrolyte multilayered coatings on magnesium alloy substrates that can be used for controlled delivery of growth factors and required biomolecules from the surface of these degradable implants could have a significant impact in the field of bone tissue regeneration. The current work reports on...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2013.05.013
更新日期:2013-11-01 00:00:00
abstract::The mechanical and electrical properties of polycaprolactone fumarate-polypyrrole (PCLF-PPy) scaffolds were studied under physiological conditions to evaluate their ability to maintain the material properties necessary for application as conductive nerve conduits. PC12 cells cultured on PCLF-PPy scaffolds were stimula...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2010.10.013
更新日期:2011-03-01 00:00:00
abstract::The central role of the cytoskeleton in both healthy and diseased cellular functions makes it a compelling subject for detailed three-dimensional (3D) micromechanical modeling. Microstructural features of the cytoskeleton govern the cell's mechanical behavior in many of the regulating cellular functions including cell...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2007.12.007
更新日期:2008-05-01 00:00:00
abstract::Decellularized heart valves have great potential as a stand-alone valve replacement or as a scaffold for tissue engineering heart valves. Before decellularized valves can be widely used clinically, regulatory standards require pre-clinical testing in an animal model, often sheep. Numerous decellularization protocols h...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2017.01.008
更新日期:2017-03-01 00:00:00
abstract::As efficient drug carriers, stimuli-responsive mesoporous silica nanoparticles are at the forefront of research on drug delivery systems. An acid-responsive system based on silyl ether has been applied to deliver a hybrid prodrug. Thiol-ene click chemistry has been successfully utilized for tethering this prodrug to m...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2017.01.062
更新日期:2017-03-15 00:00:00
abstract::The present study focuses on apatite coating on collagen films, with various different densities of carboxyl groups, using an alternate soaking process. Anionic collagen (AC), which has different densities of carboxylic groups compared to native collagen (NC), was obtained by hydrolysis of carboxyamides of asparagine ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2007.02.008
更新日期:2007-09-01 00:00:00
abstract::Substrate stiffness is emerging as an effective tool for the regulation of cell behaviours such as locomotion, proliferation and differentiation. In order to explore the potential application of this biophysical tool, material platforms displaying lateral and continuously graded stiffness are advantageous since they a...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2011.09.030
更新日期:2012-02-01 00:00:00
abstract::Three dimensional (3D) printing is highly amenable to the fabrication of tissue-engineered organs of a repetitive microstructure such as the liver. The creation of uniform and geometrically repetitive tissue scaffolds can also allow for the control over cellular aggregation and nutrient diffusion. However, the effect ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2017.12.042
更新日期:2018-03-15 00:00:00
abstract::Poly-l-lysine (PLL), in α-helix or β-sheet configuration, was used as a model peptide for investigating the effect of secondary structures on adsorption events to poly(ethylene oxide) (PEO) modified surfaces formed using θ solvents. Circular dichroism results showed that the secondary structure of PLL persisted upon a...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2013.09.010
更新日期:2014-01-01 00:00:00
abstract::Damages in pelvic floor muscles often cause dysfunction of the entire pelvic urogenital system, which is clinically challenging. A bioengineered skeletal muscle construct that mimics structural and functional characteristics of native skeletal muscle could provide a therapeutic option to restore normal muscle function...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2020.12.012
更新日期:2021-02-01 00:00:00
abstract::Small intestine submucosa (SIS) has emerged as one of a number of naturally derived extracellular matrix (ECM) biomaterials currently in clinical use. In addition to clinical applications, ECM materials form the basis for a variety of approaches within tissue engineering research. In our preliminary work it was found ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2014.08.024
更新日期:2014-12-01 00:00:00
abstract::Standard reconstructive procedures for restoring normal function after skeletal muscle defects involve the use of existing host tissues such as muscular flaps. In many instances, this approach is not feasible and delays the rehabilitation process and restoration of tissue function. Currently, cell-based tissue enginee...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2014.06.022
更新日期:2014-10-01 00:00:00
abstract::Postoperative adhesion is a serious complication that can further lead to morbidity and/or mortality. Polymer anti-adhesion barrier material provides an effective precaution to reduce the probability of postoperative adhesion. Clinical application requires these materials to be easily handled, biocompatible, biodegrad...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2017.08.047
更新日期:2017-10-15 00:00:00
abstract:UNLABELLED:Sodium polyphosphate is a linear polymer formed from phosphate units linked together by sharing oxygen atoms. Addition of calcium to a solution of sodium polyphosphate results in phase separation and formation of a polyphosphate coacervate best described as a polymeric rich viscoelastic material. Polyphospha...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2016.06.002
更新日期:2016-09-01 00:00:00
abstract::Antimicrobial peptides (AMP) are powerful components of the innate immune system, as they display wide activity spectrum and low tendency to induce pathogen resistance. Hence, the development of AMP-based coatings is a very promising strategy to prevent biomaterials-associated infections. This work aims to investigate...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2018.12.001
更新日期:2019-01-15 00:00:00
abstract::Periodontal diseases like periodontitis and peri-implantitis have been linked with Gram-negative anaerobes. The incorporation of various chemotherapeutic agents, including metal ions, into several materials and devices has been extensively studied against periodontal bacteria, and materials doped with metal ions have ...
journal_title:Acta biomaterialia
pub_type: 杂志文章,评审
doi:10.1016/j.actbio.2014.03.028
更新日期:2014-08-01 00:00:00
abstract::Hydrogels can provide a suitable environment for tissue formation by embedded cells, which makes them suitable for applications in regenerative medicine. However, hydrogels possess only limited mechanical strength, and must therefore be reinforced for applications in load-bearing conditions. In most approaches the rei...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2014.02.041
更新日期:2014-06-01 00:00:00
abstract::Extracellular matrix (ECM) is crucial to many aspects of vascular morphogenesis and maintenance of vasculature function. Currently the recapitulation of angiogenic ECM microenvironment is still challenging, due mainly to its diverse components and complex organization. Here we investigate the angiogenic potential of h...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2017.03.035
更新日期:2017-05-01 00:00:00
abstract::Atomic force microscopy (AFM) was used to study the morphological changes of two gram-negative pathogens, Pseudomonas aeruginosa and Escherichia coli, after exposure to nitric oxide (NO). The time-dependent effects of NO released from a xerogel coating and the concentration-dependent effects rendered by a small molecu...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2009.01.025
更新日期:2009-06-01 00:00:00
abstract::Meniscal tears are the most common orthopedic injuries to the human body, yet the current treatment of choice is a partial meniscectomy, which is known to lead to joint degeneration and osteoarthritis. As a result, there is a significant clinical need to develop materials capable of restoring function to the meniscus ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2014.05.004
更新日期:2014-08-01 00:00:00
abstract::Thin film nitinol has unique mechanical properties (e.g., superelasticity), excellent biocompatibility, and ultra-smooth surface, as well as shape memory behavior. All these features along with its low-profile physical dimension (i.e., a few micrometers thick) make this material an ideal candidate in developing low-pr...
journal_title:Acta biomaterialia
pub_type: 杂志文章,评审
doi:10.1016/j.actbio.2015.03.025
更新日期:2015-07-01 00:00:00
abstract::Posterior capsular opacification (PCO) is the most common complication of cataract surgery. PCO is due to the proliferation, migration, and epithelial-to-mesenchymal transition of the residual lens epithelial cells (LECs) within the lens capsule. As surface topography influences cellular response, we investigated the ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2020.08.044
更新日期:2020-10-15 00:00:00
abstract::The mechanical properties of the extracellular microenvironment regulate cell behavior, including migration, proliferation and morphogenesis. Although the elastic moduli of synthetic materials have been studied, little is known about the properties of naturally produced extracellular matrix. Here we have utilized atom...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2010.07.021
更新日期:2011-01-01 00:00:00