Abstract:
:Biological materials are the result of years of evolution and possess a number of efficient features and structures. Researchers have investigated the possibility of designing biomedical structures that take advantage of these structural features. Insect shells, such as beetle shells, are among the most promising types of biological material for biomimetic development. However, due to their intricate geometries and small sizes, it is challenging to measure the mechanical properties of these microscale structures. In this study, we developed an in-situ testing platform for site-specific experiments in a focused ion beam (FIB) system. Multi-axis nano-manipulators and a micro-force sensor were utilized in the testing platform to allow better results in the sample preparation and data acquisition. The entire test protocol, consisting of locating sample, ion beam milling and micro-mechanical bending tests, can be carried out without sample transfer or reattachment. We used our newly devised test platform to evaluate the micromechanical properties and structural features of each separated layer of the beetle horn shell. The Young's modulus of both the exocuticle and endocuticle layers was measured. We carried out a bending test to characterize the layers mechanically. The exocuticle layer bent in a brick-like manner, while the endocuticle layer exhibited a crack blunting effect. STATEMENT OF SIGNIFICANCE:This paper proposed an in-situ manipulation/test method in focused ion beam for characterizing micromechanical properties of beetle horn shell. The challenge in precise and accurate fabrication for the samples with complex geometry was overcome by using nano-manipulators having multi-degree of freedom and a micro-gripper. With the aid of this specially designed test platform, bending tests were carried out on cantilever-shaped samples prepared by focused ion beam milling. Structural differences between exocuticle and endocuticle layers of beetle horn shell were explored and the results provided insight into the structural advantages of each biocomposite structure.
journal_name
Acta Biomaterjournal_title
Acta biomaterialiaauthors
Lee HT,Kim HJ,Kim CS,Gomi K,Taya M,Nomura S,Ahn SHdoi
10.1016/j.actbio.2017.04.026subject
Has Abstractpub_date
2017-07-15 00:00:00pages
395-403eissn
1742-7061issn
1878-7568pii
S1742-7061(17)30264-7journal_volume
57pub_type
杂志文章abstract::The aim of this study was to analyze the viability of using an acellular dermal matrix (ADM) as a reinforcement material for peripheral corneal thinning disease. The complete removal of cell components was confirmed by hematoxylin and eosin (H&E) and 4',6-diamidino-2-phenylindole (DAPI) staining. Transmission electron...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2012.05.004
更新日期:2012-09-01 00:00:00
abstract::A major problem with transcutaneous osseointegrated implants is infection, mainly due to improper closure of the implant-skin interface. Therefore, the design of transcutaneous osseointegrated devices that better promote skin growth around these exit sites needs to be examined and, if successful, would clearly limit i...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2009.12.016
更新日期:2010-06-01 00:00:00
abstract::Anisotropic scaffolds with the typical structure of lamellar, aligned and continuous pores were successfully achieved by the directional solidification of water-based β-tricalcium phosphate (β-TCP) suspensions. Adjustable porosities from 49 to 82%, tunable pore widths from 8 to 50μm and linked ceramic cells with wall ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2014.08.020
更新日期:2014-12-01 00:00:00
abstract::Breast cancer has become the second leading cause of cancer-related mortality in female wherein more than 90% of breast cancer-related death results from cancer metastasis to distant organs at advanced stage. The purpose of this study is to develop biodegradable nanoparticles composed of natural polypeptides and calci...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2017.06.008
更新日期:2017-08-01 00:00:00
abstract::A three-dimensional (3-D) cell culture system that allows control of both substrate stiffness and integrin binding density was created and characterized. This system consisted of two self-assembling peptide (SAP) sequences that were mixed in different ratios to achieve the desired gel stiffness and adhesiveness. The s...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2013.04.002
更新日期:2013-08-01 00:00:00
abstract::Three protease-resistant bioorganic 304 stainless steel surfaces were created through the reaction of synthetic peptides consisting of the D-enantiomeric isomer (D-K122-4), the retro-inverso D-enantiomeric isomer (RI-K122-4), and a combination of the two peptides (D+RI) of the Pseudomonas aeruginosa PilA receptor bind...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2012.11.026
更新日期:2013-04-01 00:00:00
abstract:UNLABELLED:Natural amino acids are zwitterionic molecules and the good biocompatibility promises them potential candidates as anti-fouling materials. Here, we developed a new method to functionalize silica nanoparticles with a natural amino acid-based anti-fouling layer. Amino acids were covalently immobilized on 3-ami...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2016.03.035
更新日期:2016-08-01 00:00:00
abstract::Surgical suture is a strand of biocompatible material designed for wound closure, and therefore can be a medical device potentially suitable for local drug delivery to treat pain at the surgical site. However, the preparation methods previously introduced for drug-delivery sutures adversely influenced the mechanical s...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2013.06.003
更新日期:2013-09-01 00:00:00
abstract::Tissue-engineered temporomandibular joint (TMJ) discs offer a viable treatment option for patients with severe joint internal derangement. To date, only a handful of TMJ tissue engineering studies have been carried out and all have incorporated the use of synthetic scaffold materials. These current scaffolds have show...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2008.01.016
更新日期:2008-07-01 00:00:00
abstract::Mesenchymal stromal cell (MSC)-derived extracellular vesicles (EVs) (MSC-EVs) exhibit protective effects in damaged or diseased tissues. However, the role of EVs secreted by MSC in hypoxia-ischemic (HI) injury in neonatal mice remains unknown. Systemic administration of MSC-EVs attenuated acute brain damage and neuroi...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2020.06.037
更新日期:2020-09-01 00:00:00
abstract::The management of diabetic wounds remains a major therapeutic challenge in clinics. Herein, we report a personalized treatment using 3D scaffolds consisting of radially or vertically aligned nanofibers in combination with bone marrow mesenchymal stem cells (BMSCs). The 3D scaffolds have customizable sizes, depths, and...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2020.03.035
更新日期:2020-05-01 00:00:00
abstract::Polylactide (PLA) polymers containing five distinct lengths of fluorinated (from C3F7 to C13F27) and non-fluorinated (C6H13) end-groups were successfully synthesized by ring-opening polymerization of d,l-lactide. Fluorination was expected to increase the encapsulation efficiency of perfluorohexane (PFH). 150 nm nanoca...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2017.10.002
更新日期:2017-12-01 00:00:00
abstract:UNLABELLED:Advanced titanium (Ti) based bone implant with both angiogenesis and osteogenesis stimulating activities for enhanced clinical performance is stringently needed. In the present work, TiO2/calcium-phosphate (TCP) coatings on Ti doped with cobalt (Co) of various amounts (designated as C2-TCP, C7-TCP, and C13-T...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2016.07.045
更新日期:2016-10-01 00:00:00
abstract::Tendon adhesion formation describes the development of fibrotic tissue between the tendon and its surrounding tissues, which commonly occurs as a reaction to injury or surgery. Its impact on function and quality of life varies from negligible to severely disabling, depending on the affected area and extent of adhesion...
journal_title:Acta biomaterialia
pub_type: 杂志文章,评审
doi:10.1016/j.actbio.2021.01.027
更新日期:2021-01-25 00:00:00
abstract::Implant-derived material from metal-on-metal (MOM) hip arthroplasties may be responsible for an unexplained tissue inflammatory response. The chemical form of the metal species in the tissues is predominantly chromium (Cr), but the currently used techniques have not been able to determine whether this is Cr(III) phosp...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2010.06.006
更新日期:2010-11-01 00:00:00
abstract::This study investigated the surface characteristics and bone response of titanium implants produced by hydrothermal treatment using H(3)PO(4), and compared them with those of implants produced by commercial surface treatment methods - machining, acid etching, grit blasting, grit blasting/acid etching or spark anodizat...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2009.02.026
更新日期:2009-07-01 00:00:00
abstract::Biological scaffolds used in tissue engineering are incorporated in vivo by a process of cellular in-growth, followed by host-mediated degradation and replacement of these scaffolds, in which phagocytic cells from the monocyte/macrophage cell lineage play a key role. The chemical degradation of scaffolds with collagen...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2010.08.005
更新日期:2011-01-01 00:00:00
abstract::As the potential range of stem cell applications in tissue engineering continues to grow, the appropriate scaffolding choice is necessary to create tightly defined artificial microenvironments for each target organ. These microenvironments determine stem cell fate via control over differentiation. In this study we exa...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2010.11.022
更新日期:2011-04-01 00:00:00
abstract::This paper presents an experimental investigation and evidence of rate-dependency in the planar mechanical behaviour of semilunar heart valves. Samples of porcine aortic and pulmonary valves were subjected to biaxial deformations across 1000-fold stretch rate, ranging from λ̇=0.001 to 1 s-1. The experimental campaign ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2019.02.008
更新日期:2019-04-01 00:00:00
abstract::Inhibition of bacterial growth with the simultaneous promotion of angiogenesis has been challenging in the repair and regeneration of infected tissues. Here, we aim to tackle this issue through the use of cobalt-doped silicate microspheres that can sustainably release dual ions (silicate and cobalt) at therapeutically...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2018.11.025
更新日期:2019-01-01 00:00:00
abstract::Hydrogel microspheres with the capability to interact with charged species such as various drugs by ion-exchange processes are useful in a variety of biomedical applications. Such systems have been developed to allow active loading of the microsphere with chemotherapeutic agents in the hospital pharmacy for subsequent...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2017.02.013
更新日期:2017-04-15 00:00:00
abstract::Poly(ether ether ketone) (PEEK) and its composites are recognized as alternative bearing materials for use in arthroplasty because of their mechanical properties. The objective of this project was to evaluate the biological response of two different kinds of carbon fiber-reinforced (CFR) PEEK compared with ultra-high ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2010.06.002
更新日期:2010-11-01 00:00:00
abstract::The transfer of nucleic acids into living cells, i.e. transfection, is a major technique in current molecular biology and medicine. As nucleic acids alone are not able to penetrate the cell membrane, an efficient carrier is needed. Calcium phosphate nanoparticles can serve as carrier due to their biocompatibility, bio...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2018.11.051
更新日期:2019-01-15 00:00:00
abstract::Antibiotic resistance of bacterial biofilms limits available treatment methods for implant-associated orthopaedic infections. This study evaluated the effects of applying cathodic voltage-controlled electrical stimulations (CVCES) of -1.5V and -1.8V (vs. Ag/AgCl) to coupons of commercially pure titanium (cpTi) incubat...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2016.11.056
更新日期:2017-01-15 00:00:00
abstract::Traumatic brain injury (TBI) is a life-threatening condition defined by internal brain herniation. Severe TBI is commonly treated by a two-stage surgical intervention, where decompressive craniectomy is first conducted to remove a large portion of calvarial bone and allow unimpeded brain swelling. In the second surger...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2018.02.013
更新日期:2018-04-15 00:00:00
abstract::Evaluations of the osteoblast-like cell responses and osteoconductivity of a non-woven silica gel fabric were carried out to determine its potential for application as a scaffold material for use in bone tissue engineering. The silica gel solution was prepared by condensation following hydrolysis of tetraethyl orthosi...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2008.07.004
更新日期:2009-01-01 00:00:00
abstract::Several studies have reported the benefits of mesenchymal stem cells (MSCs) for bone tissue engineering. However, vascularization remains one of the main obstacles that must be overcome to reconstruct large bone defects. In vitro prevascularization of the three-dimensional (3-D) constructs using co-cultures of human p...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2013.05.025
更新日期:2013-09-01 00:00:00
abstract::Over the past decades, numerous tissue-engineered constructs have been investigated for the osteochondral repair. However, it still remains a challenge to regenerate the functionalized calcified layer. In this study, the potential of icariin (Ica) conjugated hyaluronic acid/collagen (Ica-HA/Col) hydrogel to promote th...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2018.05.005
更新日期:2018-07-01 00:00:00
abstract::Controlling the release of recombinant adeno-associated virus (rAAV) vectors from biocompatible materials is a novel, attractive approach to increase the residence time and effectiveness of a gene carrier at a defined target site. Self-assembling peptides have an ability to form stable hydrogels and encapsulate cells ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2015.02.013
更新日期:2015-05-01 00:00:00
abstract::Titanium oxide (TiO₂) scaffolds have previously been reported to exhibit very low mechanical strength. However, we have been able to produce a scaffold that features a high interconnectivity, a porosity of 91% and a compressive strength above 1.2 MPa. This study analyzed the in vivo performance of the porous TiO₂ scaf...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2012.09.009
更新日期:2013-02-01 00:00:00