Abstract:
:Natural polymer materials have attracted great attention in the field of hemostasis because of their wide range of source, nontoxicity, hydrophilicity, and air permeability. In the present study, two natural polymers composed of carboxymethyl chitosan (CMCS) and sodium carboxymethylcellulose (CMCNa) plus γ-(2,3-epoxypropoxy) propytrimethoxysilane (KH560) that serves as a crosslinking agent were selected to synthesize a capillary-mimicking composite hemostatic (CCK) sponge with a low density, interconnected microchannel architecture, suitable mechanical strength, high resilience, and ultrastrong liquid absorption capacity. The introduction of a large number of hydrophilic carboxymethyl functional groups and the design of capillary-mimicking structures formed by the ice segregation-induced self-assembly (ISISA) process endowed the CCK sponges with an ultrastrong liquid absorption capacity, which significantly enhanced the hemostatic ability of the materials. Both in vivo and in vitro hemostatic experiments confirmed the potential of the CCK sponges to achieve rapid hemostasis. Additionally, cytotoxicity and hemolysis assays showed that the CCK sponges exhibited good biocompatibility and hemocompatibility. The possible hemostatic mechanism was also discussed in this study. In conclusion, the capillary-mimicking hemostatic sponge exhibits a high potential to induce rapid hemostasis in prehospital emergency and clinical settings. STATEMENT OF SIGNIFICANCE: In the present study, an oriented composite hemostatic (CCK) sponge with a capillary-mimicking structure formed by the ice segregation-induced self-assembly (ISISA) process was designed and used to achieve rapid hemostasis. The unique aligned microchannel structure of the sponge exhibited an ultrastrong capillary-mimicking action and endowed the prepared CCK hemostatic sponge with a strong liquid absorption capacity. By changing the proportion of raw materials, we could modify the unique capillary-mimicking structure with aligned microchannels. Two natural polymer-based materials with abundant hydrophilic groups were chosen to prepare the CCK sponge to fully utilize the characteristics of this structure. The oriented natural polymer-based porous sponge with capillary-mimicking microchannels exhibited a strong hemostatic ability in both in vivo and in vitro tests. The results showed that the CCK sponge with the capillary-mimicking structure has a high potential to achieve rapid hemostasis.
journal_name
Acta Biomaterjournal_title
Acta biomaterialiaauthors
Wang L,Zhong Y,Qian C,Yang D,Nie J,Ma Gdoi
10.1016/j.actbio.2020.07.043subject
Has Abstractpub_date
2020-09-15 00:00:00pages
193-205eissn
1742-7061issn
1878-7568pii
S1742-7061(20)30429-3journal_volume
114pub_type
杂志文章abstract::The performance of total hip-joint replacements depends strongly on the state of lubrication in vivo. In order to test candidate prosthetic materials, in vitro wear testing requires a lubricant that behaves in the same manner as synovial fluid. The current study investigated three lubricants and looked in detail at th...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2011.12.037
更新日期:2012-07-01 00:00:00
abstract::Surface modification of poly(dl-lactic acid) (PLA) scaffolds has been performed using a biofunctional small peptide composed of collagen-like repetitive sequence and laminin-derived sequence (AG73-G(3)-(PPG)(5)) via hydrophobic interaction. The results of surface analysis suggest that AG73-G(3)-(PPG)(5) can be stably ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2009.12.001
更新日期:2010-06-01 00:00:00
abstract:UNLABELLED:Cellular microenvironments present cells with multiple stimuli, including not only soluble biochemical and insoluble matrix cues but also mechanical factors. Biomaterial array platforms have been used to combinatorially and efficiently probe and define two-dimensional (2D) and 3D microenvironmental cues to g...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2015.11.054
更新日期:2016-04-01 00:00:00
abstract::This study investigated the surface characteristics and bone response of titanium implants produced by hydrothermal treatment using H(3)PO(4), and compared them with those of implants produced by commercial surface treatment methods - machining, acid etching, grit blasting, grit blasting/acid etching or spark anodizat...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2009.02.026
更新日期:2009-07-01 00:00:00
abstract::We report on the combination of a top-down and bottom-up approach to develop thin bioactive membrane scaffolds based on functional elastin-like polymers (ELPs). Our strategy combines ELP cross-linking and assembly, and a variety of standard and novel micro/nanofabrication techniques to create self-supporting membranes...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2011.09.005
更新日期:2012-03-01 00:00:00
abstract::Scaffold-free harvest of microtissue with a defined structure has received a great deal of interest in cell-based assay and regenerative medicine. In this study, we developed thermally expandable hydrogels with spatially controlled cell adhesive patterns for rapid harvest of geometrically controlled microtissue. We pa...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2017.07.040
更新日期:2017-10-01 00:00:00
abstract::A novel visible light-crosslinkable porcine gelatin was prepared for gelation and micropatterning. The preparation employed a photo-oxidation-induced crosslinking mechanism. First, furfuryl groups were incorporated into the gelatin. Second, the modified gelatin was mixed in water with Rose Bengal, which is a visible l...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2010.05.018
更新日期:2010-10-01 00:00:00
abstract::To overcome clinical issues caused by large bone defects and subsequent nonunion, various approaches to bone regeneration have been researched, including tissue engineering, biomaterials, stem cells and drug screening. Previously, we developed a free-standing biodegradable polymer nanosheet composed of poly(L-lactic a...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2018.12.031
更新日期:2019-02-01 00:00:00
abstract::There is an unmet need for improved, effective tissue engineering strategies to replace or repair bone damaged through disease or injury. Recent research has focused on developing biomaterial scaffolds capable of spatially and temporally releasing combinations of bioactive growth factors, rather than individual molecu...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2014.05.025
更新日期:2014-10-01 00:00:00
abstract::Recent studies indicate that there is a great demand to optimize pure Zn with tunable degradation rates and more desirable biocompatibility as orthopedic implants. Metal matrix composite (MMC) can be a promising approach for this purpose. In this study, MMC with pure Zn as a matrix and hydroxyapatite (HA) as reinforce...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2018.03.007
更新日期:2018-04-15 00:00:00
abstract::Biomolecular signals within the native extracellular matrix are complex, with bioactive factors found in both soluble and sequestered states. In the design of biomaterials for tissue engineering applications it is increasingly clear that new approaches are required to locally tailor the biomolecular environment surrou...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2014.07.002
更新日期:2014-11-01 00:00:00
abstract::Development of an ex vivo culture system to expand satellite cells, the resident muscle stem cell population, will be necessary for the development of their use as therapeutics. The loss of the niche environment is often cited as the reason that culture results in both the loss of myogenic potential and low re-engraft...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2019.08.019
更新日期:2019-10-01 00:00:00
abstract::The sequence of steps of a chemical treatment having as its goal the induce of nucleation and the growth of hydroxyl carbonated apatite (HCA) at the surface of titanium implants was studied by scanning and transmission electron microscopy in cross-section. In the first step, an acid etching forms a rough titanium hydr...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2008.05.001
更新日期:2008-11-01 00:00:00
abstract::Surgical sutures represent the gold standard for wound closure, however, their main purpose is still limited to a mechanical function rather than playing a bioactive role. Since oxygen and pro-regenerative growth factors have been broadly described as key players for the healing process, in this study we evaluated the...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2018.09.060
更新日期:2018-11-01 00:00:00
abstract::Biocompatible polymer solutions that can crosslink in situ following injection to form stable hydrogels are of interest as depots for sustained delivery of therapeutic factors or cells, and as scaffolds for regenerative medicine. Here, injectable self-gelling alginate formulations obtained by mixing alginate microsphe...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2008.11.019
更新日期:2009-05-01 00:00:00
abstract::Patterned surfaces direct cell spatial dynamics, yielding cells oriented along the surface geometry, in a process known as contact guidance. The Rho family of GTPases controls the assembly of focal adhesions and cytoskeleton dynamics, but its role in modulating bone-cell alignment on patterned surfaces remains unknown...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2010.11.035
更新日期:2011-04-01 00:00:00
abstract::When a balloon-angioplasty is performed, the arterial wall is overstretched and thereby damaged, which leads to a stiffness reduction in the arterial layers. An anisotropic damage model able to reflect the main damage mechanisms in overstretched arterial walls is used in combination with a polyconvex hyperelastic stor...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2006.06.005
更新日期:2006-11-01 00:00:00
abstract::Pressure ulcers are a significant healthcare concern, especially for elderly populations. Our work served to ameliorate the chronicity of these ulcers by addressing ischemia-reperfusion injury mediated by neutrophils and the concomitant loss of vasculature in these wounds. To this end, chitosan scaffolds loaded with b...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2009.03.002
更新日期:2009-07-01 00:00:00
abstract::Byssus fibres are tough biopolymer fibres produced by mussels to attach themselves to rocks. In this communication, we present the mechanical properties of the byssus from the South American mussel Aulacomya ater which have not been previously reported in the literature. The mechanical properties of the whole threads ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2008.01.014
更新日期:2008-07-01 00:00:00
abstract::Composite films of poly(lactic-co-glycolic-acid) with multi-walled carbon nanotubes (PLGA-MWCNT) having two different nanotube orientations, namely random and vertically aligned, have been fabricated and characterized. The effect of these nanostructured surfaces on platelet adhesion is evaluated. In particular, the th...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2009.06.003
更新日期:2009-11-01 00:00:00
abstract::Developing a multi-functional radiosensitizer with high efficiency and low toxicity remains challenging. Herein, we report a mesoporous heterostructure radiosensitizer (UCNP@NBOF-FePc-PFA) containing Lu-based upconversion nanophosphor (UCNP) and Bi-based nanomaterial loaded with iron phthalocyanine for X-ray and NIR l...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2020.06.044
更新日期:2020-09-01 00:00:00
abstract::Macrophages represent a large component of the tumour microenvironment and are described to establish interactions with cancer cells, playing crucial roles in several stages of cancer progression. The functional plasticity of macrophages upon stimulation from the environment makes them susceptible to the influence of ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2015.05.022
更新日期:2015-09-01 00:00:00
abstract::Analytical protocol greatly influences the measurement of human serum albumin (HSA) adsorption to commercial expanded polytetrafluororethylene (ePTFE) exhibiting superhydrophobic wetting properties. Degassing of buffer solutions and evacuation of ePTFE adsorbent to remove trapped air immediately prior to contact with ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2008.11.003
更新日期:2009-06-01 00:00:00
abstract::A dual targeting delivery system was developed to completely conquer the two barriers that glioma treatment faces: the blood-brain barrier (BBB) and the brain-glioma barrier. Recently, a system comprising AS1411 aptamer (for glioma targeting) and TGN peptide (for BBB targeting) modified nanoparticles (AsTNPs) was deve...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2013.11.003
更新日期:2014-02-01 00:00:00
abstract::The control of cell behaviour through material geometry is appealing as it avoids the requirement for complex chemical surface modifications. Significant advances in new technologies have been made to the development of polymeric biomaterials with controlled geometry and physico-chemical properties. Solution blow spin...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2017.01.020
更新日期:2017-03-15 00:00:00
abstract::A pH-sensitive copolymer PAsp(DIP)-b-PAsp(MEA) (PDPM) was synthesized and self-assembled to micelle loading chemotherapeutic drug doxorubicin (DOX) and introducing a gold nanocage structure for photothermo-chemotherapy and photoacoustic imaging. After further surface modification with polyethylene glycol (PEG), the DO...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2017.10.018
更新日期:2017-12-01 00:00:00
abstract::Although decayed/fractured teeth can be reconstructed minimally invasively and nearly invisibly using adhesive technology, the clinical longevity of dental composite restorations is still too short. Water sorption is thought to be the principal cause of destabilization of the biomaterial-tooth bond. However, the actua...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2010.03.024
更新日期:2010-09-01 00:00:00
abstract::Serum albumin was conjugated to poly-(ethylene glycol) (PEG) and cross-linked to form mono-PEGylated albumin hydrogels. These hydrogels were used as a basis for drug carrying tissue engineering scaffold materials, based on the natural affinity of various drugs and compounds for the tethered albumin in the polymer netw...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2010.07.017
更新日期:2011-01-01 00:00:00
abstract::Surface functionalization has become of paramount importance and is considered a fundamental tool for the development and design of countless devices and engineered systems for key technological areas in biomedical, biotechnological and environmental applications. In this review, surface functionalization strategies f...
journal_title:Acta biomaterialia
pub_type: 杂志文章,评审
doi:10.1016/j.actbio.2013.03.036
更新日期:2013-07-01 00:00:00
abstract::Using ultraviolet (UV) irradiation of micro-arc oxidized (MAO) titania coating in distilled water for 0.5 and 2h, we have achieved an enhanced bioactivity and cell response to titania surface. The MAO coating appears porous and predominantly consists of nanocrystallized anatase TiO(2). Compared with the MAO coating, t...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2008.03.005
更新日期:2008-09-01 00:00:00