Abstract:
:Human cell therapy applications in tissue engineering, such as the ex vivo production of hematopoietic cells for transplantation, have recently entered the clinic. Although considerable effort has been focused on the development of biological processes to generate therapeutic cells, little has been published on the design and manufacture of devices for implementation of these processes in a robust and reproducible fashion at a clinical scale. In this study, the effect of tissue culture surface chemistry and texture was assessed in human bone marrow (BM) mononuclear cell (MNC) and CD34-enriched cell cultures. Growth and differentiation was assessed by total, progenitor (CFU-GM), stromal (CFU-F), and primitive (LTC-IC) cell output. Tissue culture treated (TCT) plastic significantly increased MNC culture output as compared with non-TCT plastic, whereas CD34-enriched cell cultures gave lower output (than MNC cultures) that was unaffected by TCT plastic. Interestingly, the level of MNC culture output was significantly different on four commercial TCT surfaces, with the best performing surface giving output that was 1.6- to 2.8-fold greater than the worst one. The surface giving the highest output was the best at supporting development of a distinct morphological feature in the adherent layer (i.e. cobblestone area) indicative of primitive cells, and X-ray photoelectron spectroscopy (XPS) was used to characterize this surface. For custom injection molding of culture devices, the use of three different resins resulted in MNC culture output that was equivalent to commercial cultureware controls, whereas CD34-enriched cell cultures were highly sensitive to resins containing additives. When the texture of molded parts was roughened by sandblasting of the tool, MNC culture output was significantly reduced and higher spikes of IL-6 and G-CSF production were observed, presumably due to macrophage activation. In conclusion, the manufacture of BM MNC culture devices for clinical applications was optimized by consideration of plastic resin, surface treatment, and texture of the culture substratum. Although CD34-enriched cells were insensitive to surface treatment, they were considerably more sensitive to biocompatibility issues related to resin selection. The development of robust systems for BM MNC expansion will enable clinical trials designed to test the safety and efficacy of cells produced in this novel tissue engineering application.
journal_name
Biomaterialsjournal_title
Biomaterialsauthors
Koller MR,Palsson MA,Manchel I,Maher RJ,Palsson BOdoi
10.1016/s0142-9612(98)00101-xsubject
Has Abstractpub_date
1998-11-01 00:00:00pages
1963-72issue
21eissn
0142-9612issn
1878-5905pii
S0142-9612(98)00101-Xjournal_volume
19pub_type
杂志文章相关文献
BIOMATERIALS文献大全abstract::Pancreatic cancer is predicted to be the second leading cause of cancer-related death by 2025. The best chemotherapy only extends survival by an average of 18 weeks. The extensive fibrotic stroma surrounding the tumor curbs therapeutic options as chemotherapy drugs cannot freely penetrate the tumor. RNA interference (...
journal_title:Biomaterials
pub_type: 杂志文章,评审
doi:10.1016/j.biomaterials.2019.119742
更新日期:2020-05-01 00:00:00
abstract::The goal of this work was to investigate the efficiency of transcellular delivery into Swiss albino mice 3T3 fibroblasts of molecules with various physico-chemical characteristics from ethosomes, phospholipid vesicular carriers containing ethanol. The probes chosen were: 4-(4-diethylamino) styryl-N-methylpyridinium io...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(01)00052-7
更新日期:2001-11-01 00:00:00
abstract::Stem cell transplantation is a promising therapeutic strategy for acute or chronic ischemic cardiomyopathy. A major limitation to efficacy in cell transplantation is the low efficiency of retention and engraftment, due at least in part to significant early "wash-out" of cells from coronary blood flow and heart contrac...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2014.06.031
更新日期:2014-10-01 00:00:00
abstract::In normal tissue repair, macrophages exhibit a pro-inflammatory phenotype (M1) at early stages and a pro-healing phenotype (M2) at later stages. We have previously shown that M1 macrophages initiate angiogenesis while M2 macrophages promote vessel maturation. Therefore, we reasoned that scaffolds that promote sequenti...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2014.10.017
更新日期:2015-01-01 00:00:00
abstract::The aim of this study was to characterize the relation of dimensional changes of dental ceramic materials as function of temperature. The thermal dimensional behavior of one glass ceramic core, four commercially available veneering porcelains and two experimental veneering porcelain materials was determined on cooling...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2003.09.027
更新日期:2004-05-01 00:00:00
abstract::Decellularized native extracellular matrix (ECM) biomaterials are widely used in tissue engineering and have reached clinical application as biomesh implants. To enhance their regenerative properties and postimplantation performance, ECM biomaterials could be functionalized via immobilization of bioactive molecules. T...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2018.08.012
更新日期:2018-11-01 00:00:00
abstract::The aim of the present study was to test the hypothesis that oligonucleotides can be used for anchorage and slow release of osteogenic growth factors such as BMP to enhance the osteogenic activity of a titanium implant surface. Strands of 60-mer non-coding DNA oligonucleotides (ODN) were bound to an acid-etched sandbl...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2011.10.027
更新日期:2012-02-01 00:00:00
abstract::Interest in the identification and isolation of circulating tumor cells (CTCs) has been growing since the introduction of CTCs as an alternative to the tumor tissue biopsy, which can potentially be important indices for prognosis and cancer treatment. However, the contamination of non-specific binding of normal hemato...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2013.03.096
更新日期:2013-07-01 00:00:00
abstract::The ability to precisely pattern embryonic stem (ES) cells in vitro into predefined arrays/geometries may allow for the recreation of a stem cell niche for better understanding of how cellular microenvironmental factors govern stem cell maintenance and differentiation. In this study, a new gelatin-based laser direct-w...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2010.11.015
更新日期:2011-03-01 00:00:00
abstract::Effective antimicrobial agents are important arsenals in our perennial fight against communicable diseases, hospital-acquired and surgical site multidrug-resistant infections. In this study, we devise a strategy for the development of highly efficacious and skin compatible yet inexpensive water-soluble macromolecular ...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2017.02.027
更新日期:2017-05-01 00:00:00
abstract::Calcium phosphate bioceramics have been applied as bone substitutes for several decades. Aseptic loosening after total joint arthroplasty is a major problem in orthopaedic surgery. Hydroxyapatite particles from materials wear have been reported as the main cause of implant failure. For this reason, an investigation in...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(03)00089-9
更新日期:2003-07-01 00:00:00
abstract::Boiling diluted alkali incubation was found to be an effective way to prepare bioactive Ti6Al4V surfaces, whether polished or not, as indicated in vitro after immersion in two different supersaturated calcification solutions (SCSs). The induction of calcium phosphate (Ca-P) precipitation from the SCSs is most probably...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(97)00232-9
更新日期:1998-01-01 00:00:00
abstract::AISI 316L stainless steel (SS) is widely used in orthopaedic implantology, although biological complications may result from its insufficient mechanical and tribological properties. In order to improve the wear and corrosion resistance as well as the hardness of 316L SS, three surface treatments, derived from those ap...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/0142-9612(96)82723-2
更新日期:1996-03-01 00:00:00
abstract::To fully understand biological behavior in vitro often dictates that oxygen be reported at either a local or a cellular level. Oxygen sensors based on the luminescent quenching of a specific form of electrospun fiber were developed for measurement of both gaseous and dissolved oxygen concentrations. Electrospinning wa...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2015.10.055
更新日期:2016-01-01 00:00:00
abstract::Efficacy of different chemical treatments on calcification of vascular graft in vitro and in vivo was studied. Culture medium-filled rat aortas were separately treated in 0.2% glutaraldehyde and epoxy compound, and photooxidized in 0.01% methylene blue for a shorter period (group 1). Another group of rat aortas were s...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(98)00038-6
更新日期:1998-09-01 00:00:00
abstract::Poly(γ-4-((2-(piperidin-1-yl)ethyl)aminomethyl)benzyl-l-glutamate) (PPABLG), a cationic helical polypeptide, has been recently developed by us as an effective non-viral gene delivery vector. In attempts to elucidate the effect of molecular architecture on the gene delivery efficiencies and thereby identify a potential...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2012.11.064
更新日期:2013-03-01 00:00:00
abstract::The release of the anti-inflammatory agent dexamethasone (DEX) from nanoparticles of poly(lactic-co-glycolic acid) (PLGA) embedded in alginate hydrogel (HG) matrices was investigated. DEX-loaded PLGA nanoparticles were prepared using a solvent evaporation technique and were characterized for size, drug loading, and in...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2005.12.021
更新日期:2006-05-01 00:00:00
abstract::A range of poly(alkyl methacrylate)s in the range C5 to C13 with varying degrees of crosslinking, have been studied with respect to stress-strain behaviour. Where the extensions to break were sufficiently high, stress-strain properties conformed well to the statistical theory of rubber elasticity, the Mooney/Rivlin C2...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/0142-9612(87)90011-1
更新日期:1987-09-01 00:00:00
abstract::The objective of this study is to develop a carrier for the controlled release of bone morphogenetic protein-2 (BMP-2) suitable for enhancement of the bone regeneration activity. Hydrogels with different water contents were prepared through glutaraldehyde crosslinking of gelatin with an isoelectric point of 9.0 under ...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(03)00337-5
更新日期:2003-11-01 00:00:00
abstract::One of the key challenges for neural tissue engineering is to exploit supporting materials with robust functionalities not only to govern cell-specific behaviors, but also to form functional neural network. The unique electrical and mechanical properties of graphene imply it as a promising candidate for neural interfa...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2013.05.024
更新日期:2013-09-01 00:00:00
abstract::Porous calcium phosphate ceramics consisting of hydroxyapatite (HA) and tricalcium phosphate (TCP) with different HA to TCP ratio were implanted intramuscularly in rabbits for six months in order to carry out a comparative study on osteogenic activity of the ceramics. Bone formation was detected only in HT73 (HA to TC...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(01)00119-3
更新日期:2002-01-01 00:00:00
abstract::Envelope, capsid and nucleic acids are key viral components that are all involved in crucial events during virus infection. Thus simultaneous labeling of these key components is an indispensable prerequisite for monitoring comprehensive virus infection process and dissecting virus infection mechanism. Baculovirus was ...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2016.04.038
更新日期:2016-08-01 00:00:00
abstract::Zwitterionic hydrogels such as those based on polycarboxybetaine (PCB) or polysulfobetaine (PSB) have potential for various biomedical applications, due to their biocompatibility and low biofouling properties. However, the poor mechanical properties of zwitterionic hydrogels developed to date remain a challenge, sever...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2019.119640
更新日期:2020-02-01 00:00:00
abstract::The conventional biomimetic apatite coating process can be accelerated by immersing substrates into concentrated simulated body fluid (5 x SBF) at 37 degrees C to form an initial coating of apatite precursor spheres, and transform the precursors into plate-like apatite structures. Depending on processing parameters, d...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2004.02.030
更新日期:2005-01-01 00:00:00
abstract::At high concentrations, manganese (Mn) promotes cellular neurodevelopment but causes toxicity. Here, we report that Mn ion at high concentrations can be delivered to pheochromocytoma 12 (PC12) cells using gold nanoparticles (AuNPs) to enhance cellular neurodevelopment without toxicity. Mn(2+) release from AuNPs was de...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2015.03.025
更新日期:2015-07-01 00:00:00
abstract::Bioactive glass is used as both a bone filler and as a coating on implants, and has been advocated as a potential osteogenic scaffold for tissue engineering. Rat-derived mesenchymal stem cells (MSCs) show elevated levels of alkaline phosphatase activity when grown on 45S5 bioactive glass as compared to standard tissue...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2007.05.038
更新日期:2007-10-01 00:00:00
abstract::Doxorubicin (DOX)-loaded glycyrrhetinic acid (GA)-modified alginate (ALG) nanoparticles (DOX/GA-ALG NPs) were prepared for targeting therapy of liver cancer. This study focused on the biodistribution of DOX/GA-ALG NPs in Kunming mice as well as their antitumor activity against liver tumors in situ and side effects. Th...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2011.11.045
更新日期:2012-03-01 00:00:00
abstract::Clinically used contrast agents for magnetic resonance imaging (MRI) suffer by the lack of specificity; short circulation time; and insufficient relaxivity. Here, a one-step combinatorial approach is described for the synthesis of magnetic lipid-polymer (hybrid) nanoparticles (MHNPs) encapsulating 5 nm ultra-small sup...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2013.07.003
更新日期:2013-10-01 00:00:00
abstract::Although transplantation of pancreatic islets is a promising approach for treatment of type 1 diabetes mellitus, the engraftment efficiency of these islets is limited by host immune responses. Extensive efforts have been made to immunoisolate these islets by introducing barriers on the islet surface. To date, these ba...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2018.08.017
更新日期:2018-11-01 00:00:00
abstract::The removal of tenacious dental plaque is of paramount importance; however, early diagnosis can be a challenging task in dental clinics due to the limitations of current approaches, specifically X-ray-based techniques. We have approached this problem by integrating antibacterial properties and X-ray contrast enhanceme...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2018.07.053
更新日期:2018-10-01 00:00:00