Abstract:
:The aim of this study was to characterize the relation of dimensional changes of dental ceramic materials as function of temperature. The thermal dimensional behavior of one glass ceramic core, four commercially available veneering porcelains and two experimental veneering porcelain materials was determined on cooling from 450 degrees C to 20 degrees C by means of a vertical differential pushrod thermal dilatometer. The thermal dimensional behavior of the ceramic materials was expressed in three different ways: as linear relation with a linear line fitting procedure; as non-linear relation by a quadratic curve fitting procedure and according to ISO 9693 by a thermal expansion coefficient. For all ceramic materials except the one consisting of aluminum oxide fillers, the thermal dimensional behavior is best described with the polynomial function: Deltal/l = C + alpha1T + alpha2T2. The description of the thermal expansion coefficient according to the ISO standard on metal is not appropriate for the prediction of a thermal incompatibility of ceramic materials. Except for Vitadur Alpha, the ceramics materials tested showed non-linear expansion; their thermal dimensional behavior can be best described according to the quadratic relation method, second by the linear relation, third as recommended by ISO.
journal_name
Biomaterialsjournal_title
Biomaterialsauthors
Isgrò G,Kleverlaan CJ,Wang H,Feilzer AJdoi
10.1016/j.biomaterials.2003.09.027keywords:
subject
Has Abstractpub_date
2004-05-01 00:00:00pages
2447-53issue
12eissn
0142-9612issn
1878-5905pii
S0142961203007610journal_volume
25pub_type
杂志文章相关文献
BIOMATERIALS文献大全abstract::Osteoblasts proliferate slowly on the surface of calcium phosphate apatite which is widely used as a substrate biomaterial in bone regeneration. Owing to poor adhesion signaling in the cells grown on the calcium phosphate surface, inadequate growth factor signaling is generated to trigger cell cycle progression. The p...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2011.01.015
更新日期:2011-04-01 00:00:00
abstract::Implant surface topography influences osteoblastic proliferation, differentiation and extracellular matrix protein expressions. Studies on preliminary interactions of osteoblast-like cells on implant interface through in vitro systems, can give lucid insights to osseo-integrative efficacies of when in vivo implants. I...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(03)00571-4
更新日期:2004-02-01 00:00:00
abstract::Porous biomaterials designed to support cellular infiltration and tissue formation play a critical role in implant fixation and engineered tissue repair. The purpose of this Leading Opinion Paper is to advocate the use of high resolution 3D imaging techniques as a tool to quantify extracellular matrix formation and va...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2008.06.018
更新日期:2008-10-01 00:00:00
abstract::Self-assembly is a prominent phenomenon observed in nature. Inspired by this thermodynamically favorable approach, several natural and synthetic materials have been investigated to develop functional systems for various biomedical applications, including drug delivery. Furthermore, layered self-assembled systems provi...
journal_title:Biomaterials
pub_type: 杂志文章,评审
doi:10.1016/j.biomaterials.2020.119929
更新日期:2020-02-29 00:00:00
abstract::The formation of bone tissue in pores, and around, a block made of partially dehydroxylated porous hydroxyapatite ceramic and implanted into a rat's femur using X-ray diffraction (XRD), infrared spectroscopy (IRS) and histological methods were investigated. Structural characteristics and composition of new bone tissue...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(98)00024-6
更新日期:1998-07-01 00:00:00
abstract::We have developed a family of synthetic biodegradable polymers that are composed of structural units endogenous to the human metabolism, designated poly(polyol sebacate) (PPS) polymers. Material properties of PPS polymers can be tuned by altering the polyol monomer and reacting stiochiometric ratio of sebacic acid. Th...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2008.08.037
更新日期:2008-12-01 00:00:00
abstract::Growth factors represent highly potent and highly efficacious means of communication to cells. At the same time, these proteins are fragile and relatively small sized--rendering their immobilization and controlled release from biomaterials challenging. In this work, we establish a method to incorporate growth factors ...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2015.01.036
更新日期:2015-05-01 00:00:00
abstract::Ophthalmic drug delivery through eye drops is inefficient because of low corneal bioavailability and short residence time in tears. Contact lenses are ideally suited for extended and targeted drug delivery to cornea, but commercial contact lenses release ophthalmic drugs for only 1-2 h. This study focuses on dispersin...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2011.10.076
更新日期:2012-03-01 00:00:00
abstract::We analysed tissues harvested during 24 retrievals of hip joint prostheses, with one or both articular components made of alumina. We describe the morphology of wear particles, measure their size and analyse their chemical composition. We relate histopathological aspects to the parameters that characterize ceramic wea...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/0142-9612(93)90175-2
更新日期:1993-07-01 00:00:00
abstract::Titanium implants have been used widely and successfully for various types of bone-anchored reconstructions. It is believed that properties of oxide films covering titanium implant surfaces are of crucial importance for a successful osseointegration, in particular at compromized bone sites. The aim of the present stud...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(01)00131-4
更新日期:2002-01-01 00:00:00
abstract::The aim of this study was to develop a chitosan-poly(acrylic) acid based controlled drug release system for gastric antibiotic delivery. Different mixtures of amoxicillin (A), chitosan (CS), and poly(acrylic) acid (PAA) were employed to obtain these polyionic complexes. A non-invasive method was employed for determini...
journal_title:Biomaterials
pub_type: 临床试验,杂志文章
doi:10.1016/s0142-9612(03)00579-9
更新日期:2004-02-01 00:00:00
abstract::The long-term behaviour of cellulose sponge implants, 10 x 10 x 5 mm in size, and tissue reactions in and around them were examined in the subcutaneous tissue of the rat from 1 to 60 weeks after implantation. The cellulose sponge used was filled up with connective tissue 4 to 8 weeks after implantation. Histologically...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(99)00094-0
更新日期:1999-11-01 00:00:00
abstract::Nanocrystalline diamond (NCD) films and nanoparticulate diamond powder (DP) are the two main representatives of diamond at the nanoscale. This study was designed to investigate the suitability of these biomaterials as cell growth supports and to determine surface characteristic properties best suited to cell attachmen...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2008.07.023
更新日期:2008-11-01 00:00:00
abstract::FT-IR analysis was performed for the hydroxyapatite (HAp)/collagen (COL) nanocomposite cross-linked by glutaraldehyde (GA). The amide bands I, II and III from COL matrix, and phosphate and carbonate bands from HAp were identified. The amide B band arising from C-H stretching mode showed a sensitive conformation by the...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(02)00232-6
更新日期:2002-12-01 00:00:00
abstract::In this study, we quantified the adsorption of immunoglobulin G (IgG) protein onto several polyelectrolyte-modified sintered porous polyethylene (PPE) membranes. The polymer surfaces had both cationic and anionic charges obtained via the adsorption of polyethylenimine (PEI) and polyacrylic acid (PAA), respectively, on...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2005.03.025
更新日期:2005-10-01 00:00:00
abstract::An appropriate method to bind extracellular matrix (ECM) proteins and growth factors using advanced protein engineering techniques has the potential to enhance cell proliferation and differentiation for tissue regeneration and repair. In this study we developed a method to co-immobilize non-covalently an ECM protein t...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2013.01.067
更新日期:2013-04-01 00:00:00
abstract::Nanoparticles have been widely used for delivering various chemical and biomolecular drugs, such as anti-cancer drugs and therapeutic proteins. Among nanoparticles, protein nanoparticles have advantages of non-cytotoxicity and biodegradability. In this study, a recombinant 30Kc19 protein was applied to human serum alb...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2013.11.001
更新日期:2014-02-01 00:00:00
abstract::PVA-AA, an esterification product of poly(vinyl alcohol) and acryloyl chloride, was synthesized and tested for its dentine bonding ability as an additive to 2-hydroxyethyl methacrylate (HEMA). The dentine bonding strength increased significantly by increasing the concentration of PVA-AA in HEMA. The dentine tensile bo...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(96)00142-1
更新日期:1997-02-01 00:00:00
abstract::Here, we report a study on the biocompatibility, cell uptake and in vitro delivery of tumor necrosis factor-related apoptosis-inducing ligand (Apo2L/TRAIL) by new nano-carriers called anodic alumina nanotubes (AANTs) for potential cancer therapy. AANTs were electrochemically engineered by a unique pulse anodization pr...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2014.03.059
更新日期:2014-07-01 00:00:00
abstract::Current tissue engineering strategies are focused on the restoration of pathologically altered tissue architecture by transplantation of cells in combination with supportive scaffolds and biomolecules. In recent years, considerable attention has been given to chitosan (CS)-based materials and their applications in the...
journal_title:Biomaterials
pub_type: 杂志文章,评审
doi:10.1016/j.biomaterials.2005.03.016
更新日期:2005-10-01 00:00:00
abstract::Nordihydroguaiaretic acid (NDGA), an antioxidant with two functional ortho-catechols from the creosote bush, has been shown to increase the mechanical properties of synthetic collagen fibers, producing biologically based, biocompatible fibers with material properties in uniaxial tensile tests to failure that are compa...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(02)00465-9
更新日期:2003-03-01 00:00:00
abstract::A photografting technique to produce functional groups of silanol able to induce apatite nucleation was attempted on polyethylene substrate for biomimetic formation of bone-mineral-like apatite layer on its surface. The polyethylene surface was subjected to vapor-phase photografting of vinyltrimethoxysilane and subseq...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(00)00437-3
更新日期:2001-09-01 00:00:00
abstract::The rationale behind this work is to design an implant device, based on a ferromagnetic material, with the potential to deform in vivo promoting osseointegration through the growth of a healthy periprosthetic bone structure. One of the primary requirements for such a device is that the material should be non-inflammat...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2011.06.002
更新日期:2011-10-01 00:00:00
abstract::Microcomputed tomography (micro-CT) is increasingly being used to analyze the three-dimensional structure and architecture of microvascular networks. Therefore we have evaluated a micro-CT analysis of VEGF-induced vessel ingrowth into a porous polyurethane scaffold through comparison with analyses by CD31 immunohistoc...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2009.07.044
更新日期:2009-10-01 00:00:00
abstract::Hydrogels produced from self-assembling peptides and peptide derivatives are being investigated as synthetic extracellular matrices for defined cell culture substrates and scaffolds for regenerative medicine. In many cases, however, they are less stiff than the tissues and extracellular matrices they are intended to m...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2008.01.008
更新日期:2008-05-01 00:00:00
abstract::The development of more selective delivery systems for cancer diagnosis and chemotherapy is one of the most important goals of current anticancer research. The purpose of this study is to evaluate various self-assembled nanoparticles as candidates to shuttle radionuclide and/or drugs into tumors and to investigate the...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2006.10.002
更新日期:2007-02-01 00:00:00
abstract::Highly cross-linked aliphatic polyurethane networks have been prepared by the bulk step reaction of low molecular weight polyols and hexamethylenediisocyanate (HDI). These polyurethane networks are optically transparent, colourless and autoclavable amorphous glassy thermosets, which are suited for use in ophthalmic ap...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/0142-9612(93)90210-s
更新日期:1993-11-01 00:00:00
abstract::Membranes of 75% and 100% benzyl hyaluronate esters (percentage of total carboxylate groups esterified) were prepared and their water vapour, oxygen and carbon dioxide transmission rates determined. The values of these properties were compared with the values obtained for several commercial wound dressings under the s...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/0142-9612(95)00324-x
更新日期:1996-08-01 00:00:00
abstract::A liposomal system with surface lactoferrin (Lf) was developed for delivering neuron growth factor (NGF) across the blood-brain barrier (BBB) and improving the viability of neuron-like SK-N-MC cells with deposited β-amyloid peptide (Aβ). The Lf-grafted liposomes carrying NGF (Lf/NGF-liposomes) were applied to a monola...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2014.03.082
更新日期:2014-07-01 00:00:00
abstract::Facile assembly of intelligent DNA nanoobjects with the ability to exert in situ visualization of intracellular microRNAs (miRNAs) has long been concerned in the fields of DNA nanotechnology and basic medical study. Here, we present a driving primer (DP)-triggered polymerization-mediated metastable assembly (PMA) stra...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2016.12.018
更新日期:2017-03-01 00:00:00