当前位置： SCI文献检索 > Journal of the Mechanical Behavior of Biomedical Materials期刊下所有文献 > Biomechanical and histologic evaluation of two application forms of surgical glue for mesh fixation to the abdominal wall.

Biomechanical and histologic evaluation of two application forms of surgical glue for mesh fixation to the abdominal wall.

Abstract：

:The use of an adhesive for mesh fixation in hernia repair reduces chronic pain and minimizes tissue damage in the patient. This study was designed to assess the adhesive properties of a medium-chain (n-butyl) cyanoacrylate glue applied as drops or as a spray in a biomechanical and histologic study. Both forms of glue application were compared to the use of simple-loose or continuous-running polypropylene sutures for mesh fixation. Eighteen adult New Zealand White rabbits were used. For mechanical tests in an ex vivo and in vivo study, patches of polypropylene mesh were fixed to an excised fragment of healthy abdominal tissue or used to repair a partial abdominal wall defect in the rabbit respectively. Depending on the fixation method used, four groups of 12 implants each or 10 implants each respectively for the ex vivo and in vivo studies were established: Glue-Drops, Glue-Spray, Suture-Simple and Suture-Continuous. Biomechanical resistance in the ex vivo implants was tested five minutes after mesh fixation. In vivo implants for biomechanical and histologic assessment were collected at 14 days postimplant. In the ex vivo study, the continuous suture implants showed the highest failure sample tension, while the implants fixed with glue showed lower failure sample tension values. However, the simple and continuous suture implants returned the highest stretch values. In the in vivo implants, failure sample tension values were similar among groups while the implants fixed with a continuous running suture had the higher stretch values, and the glue-fixed implants the lower stretch values. All meshes showed good tissue integration within the host tissue regardless of the fixation method used. Our histologic study revealed the generation of a denser, more mature repair tissue when the cyanoacrylate glue was applied as a spray rather than as drops.

journal_name

J Mech Behav Biomed Mater

journal_title

Journal of the mechanical behavior of biomedical materials

authors

Ortillés Á,Pascual G,Peña E,Rodríguez M,Pérez-Köhler B,Mesa-Ciller C,Calvo B,Bellón JM

doi

10.1016/j.jmbbm.2017.08.008

subject

Has Abstract

pub_date

2017-11-01 00:00:00

pages

434-441

eissn

1751-6161

issn

1878-0180

pii

S1751-6161(17)30348-X

journal_volume

75

pub_type

杂志文章

相关文献

Journal of the Mechanical Behavior of Biomedical Materials文献大全
  • Microstructure, mechanical and wear properties of laser surface melted Ti6Al4V alloy.

    abstract：:Laser surface melting (LSM) of Ti6Al4V alloy was carried out with an aim to improve properties such as microstructure and wear for implant applications. The alloy substrate was melted at 250W and 400W at a scan velocity of 5mm/s, with input energy of 42J/mm(2) and 68J/mm(2), respectively. The results showed that equia...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2013.12.001

    authors： Balla VK,Soderlind J,Bose S,Bandyopadhyay A

    更新日期：2014-04-01 00:00:00

  • Effects of inter-synergistic mechanical interactions on the mechanical behaviour of activated spastic semitendinosus muscle of patients with cerebral palsy.

    abstract：:Previous physiological experiments and finite element modelling indicate that inter-synergistic epimuscular myofascial force transmission (EMFT) between co-activated muscles has a potential to affect healthy muscle's contribution to joint moment and joint range of movement. This is quite relevant for patients with cer...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2017.08.040

    authors： Kaya CS,Temelli Y,Ates F,Yucesoy CA

    更新日期：2018-01-01 00:00:00

  • Biocompatibility evaluation of a thermoplastic rubber for wireless telemetric intracranial pressure sensor coating.

    abstract：:This study investigated the biocompatibility of the experimental thermoplastic rubber Arbomatrix(™) that will be used as the protective coating on a novel intracranial pressure (ICP) sensor silicon chip. Arbomatrix(™) was benchmarked against biocompatible commercial silicone rubber shunt tubing in the brain via a rat ...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2015.01.018

    authors： Yang J,Charif AC,Puskas JE,Phillips H,Shanahan KJ,Garsed J,Fleischman A,Goldman K,Roy S,Luebbers MT,Dombrowski SM,Luciano MG

    更新日期：2015-05-01 00:00:00

  • A constitutive law for degrading bioresorbable polymers.

    abstract：:This paper presents a constitutive law that predicts the changes in elastic moduli, Poisson's ratio and ultimate tensile strength of bioresorbable polymers due to biodegradation. During biodegradation, long polymer chains are cleaved by hydrolysis reaction. For semi-crystalline polymers, the chain scissions also lead ...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2016.02.026

    authors： Samami H,Pan J

    更新日期：2016-06-01 00:00:00

  • Biomechanics of stomach tissues and structure in patients with obesity.

    abstract：:Even though bariatric surgery is one of the most effective treatment option of obesity, post-surgical weight loss is not always ensured, especially in the long term, when many patients experience weight regain. Bariatric procedures are largely based on surgeon's expertise and intra-operative decisions, while an integr...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2020.103883

    authors： Carniel EL,Albanese A,Fontanella CG,Pavan PG,Prevedello L,Salmaso C,Todros S,Toniolo I,Foletto M

    更新日期：2020-10-01 00:00:00

  • Quantitative/qualitative analysis of adhesive-dentin interface in the presence of 10-methacryloyloxydecyl dihydrogen phosphate.

    abstract：:Dental adhesive provides effective retention of filling materials via adhesive-dentin hybridization. The use of co-monomers, such as 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP), is thought to be crucial for hybridization owing to their ionic-binding to calcium and co-polymerization in the polymerizable adhe...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2018.12.038

    authors： Zhou J,Wurihan,Shibata Y,Tanaka R,Zhang Z,Zheng K,Li Q,Ikeda S,Gao P,Miyazaki T

    更新日期：2019-04-01 00:00:00

  • How mechanical stresses modulate enamel demineralization in non-carious cervical lesions?

    abstract：OBJECTIVE:To introduce an experimental non-carious cervical lesion (NCCL) model for studying the influence of presence and type of stress (tension or compression) on acid effects involved in NCCL formation on the enamel near the cement-enamel junction (CEJ). METHODS:108 bovine incisors were cut into 18 × 3×3 mm3 beams...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2016.11.003

    authors： Leal NMS,Silva JL,Benigno MIM,Bemerguy EA,Meira JBC,Ballester RY

    更新日期：2017-02-01 00:00:00

  • Static and time-dependent mechanical response of organic matrix of bone.

    abstract：:Bone derives its mechanical strength from the complex arrangement of collagen fibrils (type-I primarily) reinforced with hydroxy-apatite (HAp) mineral crystals in extra- and intra-fibrillar compartments. This study demonstrates a novel approach to obtain organic matrix of bone through its demineralization as well as m...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2018.12.031

    authors： Saini K,Discher D,Kumar N

    更新日期：2019-03-01 00:00:00

  • Packing of muscles in the rabbit shank influences three-dimensional architecture of M. soleus.

    abstract：:Isolated and packed muscles (e.g. in the calf) exhibit different three-dimensional muscle shapes. In packed muscles, cross-sections are more angular compared to the more elliptical ones in isolated muscles. As far as we know, it has not been examined yet, whether the shape of the muscle in its packed condition influen...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2018.04.006

    authors： Wick C,Böl M,Müller F,Blickhan R,Siebert T

    更新日期：2018-07-01 00:00:00

  • Effects of test sample shape and surface production method on the fatigue behaviour of PMMA bone cement.

    abstract：:There is no consensus over the optimal criterion to define the fatigue life of bone cement in vitro. Fatigue testing samples have been made into various shapes using different surface preparation techniques with little attention being paid to the importance of these variations on the fatigue results. The present study...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2013.08.023

    authors： Sheafi EM,Tanner KE

    更新日期：2014-01-01 00:00:00

  • Imprecise knowledge based design and development of titanium alloys for prosthetic applications.

    abstract：:Imprecise knowledge on the composition-processing-microstructure-property correlation of titanium alloys combined with experimental data are used for developing rule based models for predicting the strength and elastic modulus of titanium alloys. The developed models are used for designing alloys suitable for orthoped...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2015.08.039

    authors： Datta S,Mahfouf M,Zhang Q,Chattopadhyay PP,Sultana N

    更新日期：2016-01-01 00:00:00

  • Bioactive composite for keratoprosthesis skirt.

    abstract：:In this study, the fabrication and properties of a synthetic keratoprosthesis skirt for use in osteo-odonto-keratoprosthesis (OOKP) surgery are discussed. In the search for a new material concept, bioactive glass and polymethyl methacrylate (PMMA)-based composites were prepared. Three different bioactive glasses (i.e....

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2011.05.025

    authors： Laattala K,Huhtinen R,Puska M,Arstila H,Hupa L,Kellomäki M,Vallittu PK

    更新日期：2011-11-01 00:00:00

  • In-situ synthesis of AgNPs in the natural/synthetic hybrid nanofibrous scaffolds: Fabrication, characterization and antimicrobial activities.

    abstract：:Silver nanoparticles embedded within a nanofibrous polymer matrix have significant attention in recent years as an antimicrobial wound dressing materials. Herein, we have fabricated a novel Ag-polyurethane-zein hybrid nanofibrous scaffold for wound dressing applications. AgNPs were synthesized in-situ via reduction of...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2016.07.034

    authors： Maharjan B,Joshi MK,Tiwari AP,Park CH,Kim CS

    更新日期：2017-01-01 00:00:00

  • Alternative processing methods of hybrid porous scaffolds based on gelatin and chitosan.

    abstract：:The present work focuses on the development of scaffolds based on gelatin and chitosan using different protocols based on the general processing of phase separation, derived from the fabrication of hydrogels and freeze-drying. The scaffolds were produced with 1 wt% of two different biopolymers, i.e. gelatin (GE) and c...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2019.103472

    authors： Perez-Puyana V,Rubio-Valle JF,Jiménez-Rosado M,Guerrero A,Romero A

    更新日期：2020-02-01 00:00:00

  • Dual modified nanosilica particles as reinforcing fillers for dental adhesives: Synthesis, characterization, and properties.

    abstract：:A facile procedure has been devised to develop a novel dentin bonding system containing poly (acrylic acid)-grafted-silanized fumed silica particles as reinforcing filler, with high stability of nanoparticle dispersion and enhanced bond strength and mechanical properties. In the first step, the silanization of fumed s...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2020.103904

    authors： Mazloom-Jalali A,Taromi FA,Atai M,Solhi L

    更新日期：2020-10-01 00:00:00

  • Experimental and constitutive modeling approaches for a study of biomechanical properties of human coronary arteries.

    abstract：:The study concerns the determination of mechanical properties of human coronary arterial walls with both experimental and constitutive modeling approaches. The research material was harvested from 18 patients (range 50-84 years). On the basis of hospital records and visual observation, each tissue sample was classifie...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2015.05.021

    authors： Jankowska MA,Bartkowiak-Jowsa M,Bedzinski R

    更新日期：2015-10-01 00:00:00

  • The use of hardened bone cement as an impaction grafting extender for revision hip arthroplasty.

    abstract：:Impaction bone grafting is a method of restoring bone stock to patients who have suffered significant bone loss due to revision total hip surgery. The procedure requires morsellised cancellous bone (MCB) to be impacted into the site of bone loss in order to stabilise the prosthesis with the aim of long term resorption...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2017.11.002

    authors： Ruddy M,FitzPatrick DP,Stanton KT

    更新日期：2018-02-01 00:00:00

  • A tribo-mechanical analysis of PVA-based building-blocks for implementation in a 2-layered skin model.

    abstract：:Poly(vinyl) alcohol hydrogel (PVA) is a well-known polymer widely used in the medical field due to its biocompatibility properties and easy manufacturing. In this work, the tribo-mechanical properties of PVA-based blocks are studied to evaluate their suitability as a part of a structure simulating the length scale dep...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2016.05.001

    authors： Morales Hurtado M,de Vries EG,Zeng X,van der Heide E

    更新日期：2016-09-01 00:00:00

  • Optimization of process parameters for drilled hole quality characteristics during cortical bone drilling using Taguchi method.

    abstract：:Orthopaedic surgery involves drilling of bones to get them fixed at their original position. The drilling process used in orthopaedic surgery is most likely to the mechanical drilling process and there is all likelihood that it may harm the already damaged bone, the surrounding bone tissue and nerves, and the peril is...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2016.05.015

    authors： Singh G,Jain V,Gupta D,Ghai A

    更新日期：2016-09-01 00:00:00

  • Manipulation of mechanical compliance of elastomeric PGS by incorporation of halloysite nanotubes for soft tissue engineering applications.

    abstract：:Poly (glycerol sebacate) (PGS) is a promising elastomer for use in soft tissue engineering. However, it is difficult to achieve with PGS a satisfactory balance of mechanical compliance and degradation rate that meet the requirements of soft tissue engineering. In this work, we have synthesised a new PGS nanocomposite ...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2011.05.038

    authors： Chen QZ,Liang SL,Wang J,Simon GP

    更新日期：2011-11-01 00:00:00

  • Effect of size and dimensional tolerance of reverse total shoulder arthroplasty on wear: An in-silico study.

    abstract：:Although huge research efforts have been devoted to wear analysis of ultra-high molecular weight polyethylene (UHMWPE) in hip and knee implants, shoulder prostheses have been studied only marginally. Recently, the authors presented a numerical wear model of reverse total shoulder arthroplasties (RTSAs), and its applic...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2016.03.033

    authors： Mattei L,Di Puccio F,Joyce TJ,Ciulli E

    更新日期：2016-08-01 00:00:00

  • Transient behavior and relaxation of microcapsules with a cross-linked human serum albumin membrane.

    abstract：:Capsules consist of droplets enclosed by a membrane with shear resistant properties especially when fabricated by interfacial cross-linking. In many applications, the protection and release of the internal medium need to be strictly controlled. It is possible to tune the membrane mechanical properties by changing the ...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2015.09.008

    authors： Gires PY,Barthès-Biesel D,Leclerc E,Salsac AV

    更新日期：2016-05-01 00:00:00

  • A projection method to extract biological membrane models from 3D material models.

    abstract：:This paper presents a projection method for deriving membrane models from the corresponding three-dimensional material models. As a particular example the anisotropic Holzapfel-Gasser-Ogden model is considered. The projection procedure is based on the kinematical and constitutive assumptions of a general membrane theo...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2015.09.001

    authors： Roohbakhshan F,Duong TX,Sauer RA

    更新日期：2016-05-01 00:00:00

  • Advances in zirconia toughened alumina biomaterials for total joint replacement.

    abstract：:The objective of this article is to provide an up-to-date overview of zirconia-toughened alumina (ZTA) components used in total hip arthroplasties. The structure, mechanical properties, and available data regarding the clinical performance of ZTA are summarized. The advancements that have been made in understanding th...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章,评审

    doi：10.1016/j.jmbbm.2013.03.022

    authors： Kurtz SM,Kocagöz S,Arnholt C,Huet R,Ueno M,Walter WL

    更新日期：2014-03-01 00:00:00

  • Intrafibrillar plasticity through mineral/collagen sliding is the dominant mechanism for the extreme toughness of antler bone.

    abstract：:The inelastic deformability of the mineralised matrix in bones is critical to their high toughness, but the nanoscale mechanisms are incompletely understood. Antler is a tough bone type, with a nanostructure composed of mineralised collagen fibrils ∼100nm diameter. We track the fibrillar deformation of antler tissue d...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2013.03.020

    authors： Gupta HS,Krauss S,Kerschnitzki M,Karunaratne A,Dunlop JW,Barber AH,Boesecke P,Funari SS,Fratzl P

    更新日期：2013-12-01 00:00:00

  • In situ compressibility of carbonated hydroxyapatite in tooth dentine measured under hydrostatic pressure by high energy X-ray diffraction.

    abstract：:Tooth dentine and other bone-like materials contain carbonated hydroxyapatite nanoparticles within a network of collagen fibrils. It is widely assumed that the elastic properties of biogenic hydroxyapatites are identical to those of geological apatite. By applying hydrostatic pressure and by in situ measurements of th...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2015.06.005

    authors： Forien JB,Fleck C,Krywka C,Zolotoyabko E,Zaslansky P

    更新日期：2015-10-01 00:00:00

  • Assessing the microstructural response to applied deformation in porcine passive skeletal muscle.

    abstract：:The passive micro-structural mechanical response of muscle tissue is important for numerous medical applications. However, the recently observed tension/compression asymmetry in porcine muscle remains poorly explained. In particular there remains a lack of understanding of how external tension or compression applied i...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2014.08.019

    authors： Takaza M,Cooney GM,McManus G,Stafford P,Simms CK

    更新日期：2014-12-01 00:00:00

  • Structural analysis of rat bone explants kept in vitro in simulated microgravity conditions.

    abstract：:Skeletal abnormalities reported in humans and laboratory animals after spaceflight, include cancellous osteopenia, decreased cortical and cancellous bone formation, aberrant matrix ultrastructure, decreased mineralization and reduced bone strength. Although considerable effort has been made up to now to understand the...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2008.06.004

    authors： Cosmi F,Steimberg N,Dreossi D,Mazzoleni G

    更新日期：2009-04-01 00:00:00

  • Mechanical properties, electrochemical corrosion and in-vitro bioactivity of yttria stabilized zirconia reinforced hydroxyapatite coatings prepared by gas tunnel type plasma spraying.

    abstract：:Yttria stabilized zirconia reinforced hydroxyapatite coatings were deposited by a gas tunnel type plasma spray torch under optimum spraying conditions. For this purpose, 10, 20 and 30 wt% of yttria stabilized zirconia (YSZ) powders were premixed individually with hydroxyapatite (HA) powder and were used as the feedsto...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2011.11.002

    authors： Yugeswaran S,Yoganand CP,Kobayashi A,Paraskevopoulos KM,Subramanian B

    更新日期：2012-05-01 00:00:00

  • Cytocompatibility, mechanical and dissolution properties of high strength boron and iron oxide phosphate glass fibre reinforced bioresorbable composites.

    abstract：:In this study, Polylactic acid (PLA)/phosphate glass fibres (PGF) composites were prepared by compression moulding. Fibres produced from phosphate based glasses P2O5-CaO-MgO-Na2O (P45B0), P2O5-CaO-MgO-Na2O-B2O3 (P45B5), P2O5-CaO-MgO-Na2O-Fe2O3 (P45Fe3) and P2O5-CaO-MgO-Na2O-B2O3-Fe2O3 (P45B5Fe3) were used to reinforce...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2015.12.011

    authors： Sharmin N,Hasan MS,Parsons AJ,Rudd CD,Ahmed I

    更新日期：2016-06-01 00:00:00