The effects of combined micron-/submicron-scale surface roughness and nanoscale features on cell proliferation and differentiation.

Abstract:

:Titanium (Ti) osseointegration is critical for the success of dental and orthopedic implants. Previous studies have shown that surface roughness at the micro- and submicro-scales promotes osseointegration by enhancing osteoblast differentiation and local factor production. Only relatively recently have the effects of nanoscale roughness on cell response been considered. The aim of the present study was to develop a simple and scalable surface modification treatment that introduces nanoscale features to the surfaces of Ti substrates without greatly affecting other surface features, and to determine the effects of such superimposed nano-features on the differentiation and local factor production of osteoblasts. A simple oxidation treatment was developed for generating controlled nanoscale topographies on Ti surfaces, while retaining the starting micro-/submicro-scale roughness. Such nano-modified surfaces also possessed similar elemental compositions, and exhibited similar contact angles, as the original surfaces, but possessed a different surface crystal structure. MG63 cells were seeded on machined (PT), nano-modified PT (NMPT), sandblasted/acid-etched (SLA), and nano-modified SLA (NMSLA) Ti disks. The results suggested that the introduction of such nanoscale structures in combination with micro-/submicro-scale roughness improves osteoblast differentiation and local factor production, which, in turn, indicates the potential for improved implant osseointegration in vivo.

journal_name

Biomaterials

journal_title

Biomaterials

authors

Gittens RA,McLachlan T,Olivares-Navarrete R,Cai Y,Berner S,Tannenbaum R,Schwartz Z,Sandhage KH,Boyan BD

doi

10.1016/j.biomaterials.2011.01.029

subject

Has Abstract

pub_date

2011-05-01 00:00:00

pages

3395-403

issue

13

eissn

0142-9612

issn

1878-5905

pii

S0142-9612(11)00042-1

journal_volume

32

pub_type

杂志文章
  • Single-layer tungsten oxide as intelligent photo-responsive nanoagents for permanent male sterilization.

    abstract::Permanent male sterilization has been recognized as useful tools for the development of neuter experimental animals and fattening livestock, as well as efficient control of pet overpopulation. Traditional routes such as surgical ways, chemical injections, and anti-fertility vaccines have addressed these crucial proble...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2015.08.008

    authors: Liu Z,Liu X,Ran X,Ju E,Ren J,Qu X

    更新日期:2015-11-01 00:00:00

  • Supramolecular pseudo-block gene carriers based on bioreducible star polycations.

    abstract::A series of supramolecular pseudo-block polycations (CD-SS-pDM/Ad-pPEGs) were realized by assembling bioreducible β-cyclodextrin-cored star poly (2-dimethyl amino)ethyl methacrylate with different molecular weight and an adamantine-ended linear poly(poly(ethylene glycol)ethyl ether methacrylate) (pPEGEEMA) via the hos...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2013.03.092

    authors: Hu Y,Yuan W,Zhao NN,Ma J,Yang WT,Xu FJ

    更新日期:2013-07-01 00:00:00

  • Nanopatterned muscle cell patches for enhanced myogenesis and dystrophin expression in a mouse model of muscular dystrophy.

    abstract::Skeletal muscle is a highly organized tissue in which the extracellular matrix (ECM) is composed of highly-aligned cables of collagen with nanoscale feature sizes, and provides structural and functional support to muscle fibers. As such, the transplantation of disorganized tissues or the direct injection of cells into...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2013.10.067

    authors: Yang HS,Ieronimakis N,Tsui JH,Kim HN,Suh KY,Reyes M,Kim DH

    更新日期:2014-02-01 00:00:00

  • Elaboration and evaluation of an intraoral controlled release delivering system.

    abstract::In order to improve the administration of drugs for all pathology of the oral cavity, we have developed an intraoral controlled release delivering system, permitting to reach high enough local concentrations for desirable therapeutic effect with minimal side effects. We have formulated tablets of 200 mg intended to be...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/s0142-9612(98)00070-2

    authors: Diarra M,Pourroy G,Muster D,Zingraff M,Boymond C

    更新日期:1998-08-01 00:00:00

  • Mucus-penetrating budesonide nanosuspension enema for local treatment of inflammatory bowel disease.

    abstract::Inflammatory bowel disease (IBD) is a chronic inflammatory gastrointestinal disorder that affects more than 1 million individuals in the USA. Local therapy with enema formulations, such as micronized budesonide (Entocort®), is a common strategy for treating patients with distally active IBD. However, we hypothesize th...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2018.09.005

    authors: Date AA,Halpert G,Babu T,Ortiz J,Kanvinde P,Dimitrion P,Narayan J,Zierden H,Betageri K,Musmanno O,Wiegand H,Huang X,Gumber S,Hanes J,Ensign LM

    更新日期:2018-12-01 00:00:00

  • Native fibrillar collagen membranes of micron-scale and submicron thicknesses for cell support and perfusion.

    abstract::Fibrillar type I collagen is nontoxic, biocompatible, and possesses considerable strength and stability. In a study of scaffolds for use in laminated tissue substitutes, we examined the properties of membranes made from air-dried hydrogels of collagen fibrils that were polymerized from native, monomeric collagen. Plan...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2004.04.019

    authors: Vernon RB,Gooden MD,Lara SL,Wight TN

    更新日期:2005-04-01 00:00:00

  • Comparative proteomic analysis of endothelial cells progenitor cells derived from cord blood- and peripheral blood for cell therapy.

    abstract::Vasculopathy due to ischemia in damaged tissues is a major cause of morbidity and mortality. To treat these conditions, endothelial progenitor cells (EPCs) from various sources, such as umbilical cord or peripheral blood, have been the focus of the regenerative medicine field due to their proliferative and vasculogeni...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2012.11.017

    authors: Kim J,Jeon YJ,Kim HE,Shin JM,Chung HM,Chae JI

    更新日期:2013-02-01 00:00:00

  • Endogenous human skin equivalent promotes in vitro morphogenesis of follicle-like structures.

    abstract::Three-dimensional constructs formed by cells embedded in an exogenous scaffold could not represent a faithful in vitro replica of native and functional tissues. In this work we produced an endogenous human skin equivalent by means of a tissue engineering process that induces the full morphogenesis of functional dermal...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2016.05.047

    authors: Casale C,Imparato G,Urciuolo F,Netti PA

    更新日期:2016-09-01 00:00:00

  • Nanocarriers with ultrahigh chromophore loading for fluorescence bio-imaging and photodynamic therapy.

    abstract::We describe the design of original nanocarriers that allows for ultrahigh chromophore loading while maintaining the photo-activity of each individual molecule. They consist in shells of charged biocompatible polymers grafted on gold nanospheres. The self-organization of extended polymer chains results from repulsive c...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2013.07.032

    authors: Navarro JR,Lerouge F,Cepraga C,Micouin G,Favier A,Chateau D,Charreyre MT,Lanoë PH,Monnereau C,Chaput F,Marotte S,Leverrier Y,Marvel J,Kamada K,Andraud C,Baldeck PL,Parola S

    更新日期:2013-11-01 00:00:00

  • In vitro leucocyte adhesion to modified polyurethane surfaces. I. Effect of ionizable functional groups.

    abstract::To study the effect of ionizable functional groups on the adhesion of leucocytes to surfaces, both poly(ethyleneimine) and poly(acrylic acid) were immobilized on polyurethane films, resulting in the introduction of amine and carboxylic acid groups, respectively. This was confirmed by contact angle measurements and XPS...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/0142-9612(92)90114-4

    authors: Bruil A,Terlingen JG,Beugeling T,van Aken WG,Feijen J

    更新日期:1992-01-01 00:00:00

  • The effect of lactose-conjugated silk biomaterials on the development of fibrogenic fibroblasts.

    abstract::Surface properties of implanted biomaterials can cause fibrotic tissue reactions by stimulating differentiation of host fibroblasts into contractile myofibroblasts. Silk fibroin (SF) protein has been used as biomaterial in pure and blended form. however, its effect on myofibroblast differentiation remains elusive. We ...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2008.08.033

    authors: Acharya C,Hinz B,Kundu SC

    更新日期:2008-12-01 00:00:00

  • Surface tailoring of poly(DL-lactic acid) by ligand-tethered amphiphilic polymer for promoting chondrocyte attachment and growth.

    abstract::The ligand-tethered poly(ethylene oxide-propylene oxide-ethylene oxide) (PEO-PPO-PEO) triblock copolymer was explored to engineer poly(DL-lactic acid) (PDL-LA) material to promote cell attachment and growth. The PEO-PPO-PEO was activated by methyl sulfonyl chloride and the amino acid, and peptide were attached. By ble...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2003.08.031

    authors: Ji J,Zhu H,Shen J

    更新日期:2004-05-01 00:00:00

  • The effect of biomimetic apatite structure on osteoblast viability, proliferation, and gene expression.

    abstract::The conventional biomimetic apatite coating process can be accelerated by immersing substrates into concentrated simulated body fluid (5 x SBF) at 37 degrees C to form an initial coating of apatite precursor spheres, and transform the precursors into plate-like apatite structures. Depending on processing parameters, d...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2004.02.030

    authors: Chou YF,Huang W,Dunn JC,Miller TA,Wu BM

    更新日期:2005-01-01 00:00:00

  • In vitro evaluations of innate and acquired immune responses to electrospun polydioxanone-elastin blends.

    abstract::Immune response testing of biomaterials is an essential component of biocompatibility assessment, particularly when the materials of interest are used to design bioresorbable scaffolds with the potential to promote in situ regeneration. Current trends in immune response testing of biomaterials typically examine few el...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2008.09.019

    authors: Smith MJ,White KL Jr,Smith DC,Bowlin GL

    更新日期:2009-01-01 00:00:00

  • Long-term culture of embryonic rat cardiomyocytes on an organosilane surface in a serum-free medium.

    abstract::Potential applications of engineered, functional, cardiac muscle extends from basic research through drug discovery to engineering heart tissue for transplantation. One of the central questions in cardiac tissue engineering is to understand and control the complex interactions between the cardiac muscle cells and thei...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2004.01.020

    authors: Das M,Molnar P,Gregory C,Riedel L,Jamshidi A,Hickman JJ

    更新日期:2004-11-01 00:00:00

  • Mechanical loading of bovine pericardium accelerates enzymatic degradation.

    abstract::Bioprosthetic heart valves fail as the result of two simultaneous processes: structural deterioration and calcification. Leaflet deterioration and perforation have been correlated with regions of highest stress in the tissue. The failures have long been assumed to be due to simple mechanical fatigue of the collagen fi...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/s0142-9612(99)00013-7

    authors: Ellsmere JC,Khanna RA,Lee JM

    更新日期:1999-06-01 00:00:00

  • Breast cancer cells and macrophages in a paracrine-juxtacrine loop.

    abstract::Breast cancer cells (BCC) and macrophages are known to interact via epidermal growth factor (EGF) produced by macrophages and colony stimulating factor-1 (CSF-1) produced by BCC. Despite contradictory findings, this interaction is perceived as a paracrine loop. Further, the underlying mechanism of interaction remains ...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2020.120412

    authors: Onal S,Turker-Burhan M,Bati-Ayaz G,Yanik H,Pesen-Okvur D

    更新日期:2021-01-01 00:00:00

  • Regeneration of diaphragm with bio-3D cellular patch.

    abstract::Neonates with congenital diaphragmatic hernia often require surgical defect closure with a patch. Alternatives to native diaphragmatic tissue are critically needed for this paediatric surgery. The clinical efficacy of mesh patches is limited by complications associated with residual foreign material and by hernia recu...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2018.03.012

    authors: Zhang XY,Yanagi Y,Sheng Z,Nagata K,Nakayama K,Taguchi T

    更新日期:2018-06-01 00:00:00

  • The protective role of arjunolic acid against doxorubicin induced intracellular ROS dependent JNK-p38 and p53-mediated cardiac apoptosis.

    abstract::In spite of tremendous demand for the development and implementation of effective therapeutic strategies, limitations are still associated with doxorubicin-induced cardiotoxicity. Arjunolic acid (AA) has been shown to possess a multitude of biological functions. The purpose of the present study was to explore whether ...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2011.03.048

    authors: Ghosh J,Das J,Manna P,Sil PC

    更新日期:2011-07-01 00:00:00

  • Histological evaluation of the biocompatibility of a glass-ionomer cement in rat alveolus.

    abstract::A type III glass-ionomer cement (Vidrion F), currently used as fast-setting lining material and fissure sealant, was implanted into rat dental alveolus immediately after tooth extraction and its biocompatibility was analysed in terms of incorporation into alveolar bone in the wound healing process. Histological and hi...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/s0142-9612(96)00110-x

    authors: Brentegani LG,Bombonato KF,Carvalho TL

    更新日期:1997-01-01 00:00:00

  • Surface roughening of glass ionomer cements by neutral NaF solutions.

    abstract::The objective of this study was to investigate the effect of repeated applications of a neutral NaF solution on the surface roughness of four conventional glass ionomer cements (GIC) (ChemFil Superior encapsulated, Fuji Cap II, Ketac-Fil and Hi Dense), three resin-modified (RM-) GIC (Fuji II LC encapsulated, Photac-Fi...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/s0142-9612(02)00617-8

    authors: De Witte AM,De Maeyer EA,Verbeeck RM

    更新日期:2003-05-01 00:00:00

  • Bioactive glass as a drug delivery system of tetracycline and tetracycline associated with beta-cyclodextrin.

    abstract::The aim of this study was to evaluate the physical-chemical properties, in vivo biocompatibility and antimicrobial activity of bioactive glasses (BG) used as a controlled release device for tetracycline hydrochloride and an inclusion complex formed by tetracycline and beta-cyclodextrin at 1:1 molar ratio. The BG as we...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/s0142-9612(03)00524-6

    authors: Domingues ZR,Cortés ME,Gomes TA,Diniz HF,Freitas CS,Gomes JB,Faria AM,Sinisterra RD

    更新日期:2004-01-01 00:00:00

  • Cytotoxicity and MMP-9 activation induced in human mononuclear cells by UHMWPE oxidation.

    abstract::Ultra high molecular weight polyethylene (UHMWPE) used in orthopedic prosthesis can be oxidized during sterilization processes such as gamma-ray irradiation. Oxidation alters UHMWPE structure and mechanical properties and it has been suggested that this alteration is the first step in the loosening process. Direct eff...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/s0142-9612(02)00097-2

    authors: Renò F,Bracco P,Costa L,Cannas M

    更新日期:2002-09-01 00:00:00

  • Polymeric nanoparticles promote macrophage reversal from M2 to M1 phenotypes in the tumor microenvironment.

    abstract::Immunotherapy has shown promising treatment effects for a variety of cancers. However, the immune treatment efficiency for solid tumors is limited owing to insufficient infiltration of immune cells into solid tumors. The conversion of tumor-supportive macrophages to tumor-suppressive macrophages, inducing the function...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2016.09.034

    authors: Wang Y,Lin YX,Qiao SL,An HW,Ma Y,Qiao ZY,Rajapaksha RP,Wang H

    更新日期:2017-01-01 00:00:00

  • In vitro and in vivo changes to PLGA/sirolimus coating on drug eluting stents.

    abstract::The degradation behavior of the absorbable coating may have significant impacts to the short and long-term safety of the drug eluting stent (DES). A poly(lactide-co-glycolide) (PLGA) polymer coating containing sirolimus on stent surface was studied when stents were expanded to 3.0 mm. In vitro and in vivo degradation ...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2010.02.003

    authors: Xi T,Gao R,Xu B,Chen L,Luo T,Liu J,Wei Y,Zhong S

    更新日期:2010-07-01 00:00:00

  • Effect of adhesive layer thickness on the bond strength of a zinc polycarboxylate dental cement.

    abstract::This study reports the effect of varying the thickness of a commercial zinc polycarboxylate dental cement on its adhesion in a metal-to-metal single lap joint. The thickness was controlled externally in a specially designed apparatus, rather than by the inclusion of isodimensional glass spheres, as has been done previ...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/0142-9612(95)98279-n

    authors: Akinmade AO,Nicholson JW

    更新日期:1995-01-01 00:00:00

  • Analysis of MRI images of a silicone elastomer under different axial loading conditions.

    abstract::Silicone elastomers have been used as implants in orthopaedics for replacements of small joints such as the metacarpophalangeal joint. A series of experiments was conducted an axially tensioned silicone elastomer tendon spacer samples to determine whether there is a relationship between stress in the material and imag...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/s0142-9612(97)00155-5

    authors: Abel EW,Wheeler KI,Chudek JA,Hunter G,Som FM

    更新日期:1998-01-01 00:00:00

  • Effect of convection on osteoblastic cell growth and function in biodegradable polymer foam scaffolds.

    abstract::Culture of seeded osteoblastic cells in three-dimensional osteoconductive scaffolds in vitro is a promising approach to produce an osteoinductive material for repair of bone defects. However, culture of cells in scaffolds sufficiently large to bridge critical-sized defects is a challenge for tissue engineers. Diffusio...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/s0142-9612(00)00280-5

    authors: Goldstein AS,Juarez TM,Helmke CD,Gustin MC,Mikos AG

    更新日期:2001-06-01 00:00:00

  • Mulberry-like dual-drug complicated nanocarriers assembled with apogossypolone amphiphilic starch micelles and doxorubicin hyaluronic acid nanoparticles for tumor combination and targeted therapy.

    abstract::A comprehensive strategy for the preparation of mulberry-like dual-drug complicated nanocarriers (MLDC NCs) with high drug loading and adjustable dual-drug ratio was developed. First, apogossypolone (ApoG2) amphiphilic starch micelles (AASt MCs) were prepared by self-assembly process, and doxorubicin (DOX) hyaluronic ...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2014.10.073

    authors: Li K,Liu H,Gao W,Chen M,Zeng Y,Liu J,Xu L,Wu D

    更新日期:2015-01-01 00:00:00

  • Mechanical properties and aesthetics of FRP orthodontic wire fabricated by hot drawing.

    abstract::The FRP wires 0.5 mm in diameter with a multiple fiber structure were fabricated by drawing the fiber polymer complex at 250 degrees C for an esthetic, transparent orthodontic wire. Biocompatible CaO-P2O5-SiO2-Al2O3 (CPSA) glass fibers of 8-20 microm in diameter were oriented unidirectionally in the longitudinal direc...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/s0142-9612(98)00127-6

    authors: Imai T,Watari F,Yamagata S,Kobayashi M,Nagayama K,Toyoizumi Y,Nakamura S

    更新日期:1998-12-01 00:00:00