Compression of pellets coated with various aqueous polymer dispersions.

Abstract:

:Pellets coated with a new aqueous polyvinyl acetate dispersion, Kollicoat SR 30 D, could be compressed into tablets without rupture of the coating providing unchanged release profiles. In contrast, the compression of pellets coated with the ethylcellulose dispersion, Aquacoat ECD 30, resulted in rupture of the coating and an increase in drug release. Plasticizer-free Kollicoat SR coatings were too brittle and ruptured during compression. The addition of only 10% w/w triethyl citrate as plasticizer improved the flexibility of the films significantly and allowed compaction of the pellets. The drug release was almost independent of the compression force and the pellet content of the tablets. The inclusion of various tabletting excipients slightly affected the drug release, primarily because of a different disintegration rate of the tablets. The core size of the starting pellets had no influence on the drug release. Pellets coated with the enteric polymer dispersion Kollicoat 30 D MAE 30 DP [poly(methacrylic acid, ethyl acrylate) 1:1] lost their enteric properties after compression because of the brittle properties of this enteric polymer. Coating of pellets with a mixture of Kollicoat MAE 30 DP and Kollicoat EMM 30 D [poly(ethyl acrylate, methyl methacrylate) 2:1] at a ratio of 70/30 and compaction of the pellets resulted in sufficient enteric properties.

journal_name

Int J Pharm

authors

Dashevsky A,Kolter K,Bodmeier R

doi

10.1016/j.ijpharm.2004.03.019

keywords:

subject

Has Abstract

pub_date

2004-07-26 00:00:00

pages

19-26

issue

1-2

eissn

0378-5173

issn

1873-3476

pii

S0378517304002108

journal_volume

279

pub_type

杂志文章
  • Arsenic release from glass containers by action of intravenous nutrition formulation constituents.

    abstract::Pharmacopoeias prescribe tests to determine the levels of arsenic in raw materials and glass containers. In this study, glass ampoules for injectables containing individually the main components of intravenous nutrition formulations were submitted to the hydrolytic resistance test by heating at 121 degrees C for 30 mi...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2006.02.008

    authors: Bohrer D,Becker E,Nascimento PC,Mörschbächer V,de Carvalho LM,da Silva Marques M

    更新日期:2006-06-06 00:00:00

  • Protein aggregation--pathways and influencing factors.

    abstract::Proteins generally will tend to aggregate under a variety of environmental conditions in comparison with small drug molecules. The extent of aggregation is dependent on many factors that can be broadly classified as intrinsic (primary, secondary, tertiary or quaternary structure) or extrinsic (environment in which pro...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章,评审

    doi:10.1016/j.ijpharm.2010.02.025

    authors: Wang W,Nema S,Teagarden D

    更新日期:2010-05-10 00:00:00

  • The influence of carrier roughness on adhesion, content uniformity and the in vitro deposition of terbutaline sulphate from dry powder inhalers.

    abstract::The aim of this study was to establish a correlation between carrier characteristics and the dispersibility of drug from the blend. The influence of the roughness of a commonly used carrier material, lactose monohydrate, on the adhesion, dose uniformity, and aerodynamic properties of a model drug, terbutaline sulphate...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2004.02.002

    authors: Flament MP,Leterme P,Gayot A

    更新日期:2004-05-04 00:00:00

  • PLGA-based drug delivery systems: importance of the type of drug and device geometry.

    abstract::Different types of ibuprofen- and lidocaine-loaded, poly(lactic-co-glycolic acid) (PLGA)-based microparticles and thin, free films of various dimensions were prepared and physico-chemically characterized in vitro. The obtained experimental results were analyzed using mathematical theories based on Fick's second law of...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2007.10.030

    authors: Klose D,Siepmann F,Elkharraz K,Siepmann J

    更新日期:2008-04-16 00:00:00

  • Dissolution performance of binary amorphous drug combinations--Impact of a second drug on the maximum achievable supersaturation.

    abstract::An increased number of amorphous formulations of poorly water soluble drugs are being introduced into the market due to their higher transient solubility and thus faster absorption and higher bioavailability. While most amorphous drug products contain a single drug substance, there is a growing trend towards co-formul...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2015.10.026

    authors: Trasi NS,Taylor LS

    更新日期:2015-12-30 00:00:00

  • Near-infrared spectroscopy (NIRS) and chemometric analysis of Malaysian and UK paracetamol tablets: a spectral database study.

    abstract::The influx of medicines from different sources into healthcare systems of developing countries presents a challenge to monitor their origin and quality. The absence of a repository of reference samples or spectra prevents the analysis of tablets by direct comparison. A set of paracetamol tablets purchased in Malaysian...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2011.05.057

    authors: Said MM,Gibbons S,Moffat AC,Zloh M

    更新日期:2011-08-30 00:00:00

  • Influence of nanostructured lipid carriers (NLC) on the physical properties of the Cutanova Nanorepair Q10 cream and the in vivo skin hydration effect.

    abstract::Cutanvoa Nanorepair Q10 cream, the first NLC containing cosmetical product introduced to the market in October 2005, was compared to an identical o/w cream without NLC with regards to particle size, melting behaviour, rheological properties and the in vivo effect on skin hydration. The consistency, the spreadability o...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2010.06.007

    authors: Pardeike J,Schwabe K,Müller RH

    更新日期:2010-08-30 00:00:00

  • Melatonin-loaded lecithin/chitosan nanoparticles: physicochemical characterisation and permeability through Caco-2 cell monolayers.

    abstract::In this study, the potential of lecithin/chitosan nanoparticles (NPs) as a mucoadhesive colloidal nanosystem for transmucosal delivery of melatonin was investigated. The size, zeta potential and melatonin loading of the lecithin/chitosan NPs were investigated as a function of lecithin type (Lipoid S45, S75 and S100) a...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2009.07.001

    authors: Hafner A,Lovrić J,Voinovich D,Filipović-Grcić J

    更新日期:2009-11-03 00:00:00

  • A review of factors affecting electrostatic charging of pharmaceuticals and adhesive mixtures for inhalation.

    abstract::Pharmaceutical powders are typically insulators consisting of relatively small particles and thus they usually exhibit significant electrostatic charging behaviours. In the inhalation field, the measurement of electrostatic charge is an imperative stage during pharmaceutical formulation development. The electrostatic ...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章,评审

    doi:10.1016/j.ijpharm.2016.01.076

    authors: Kaialy W

    更新日期:2016-04-30 00:00:00

  • Elucidation and visualization of solid-state transformation and mixing in a pharmaceutical mini hot melt extrusion process using in-line Raman spectroscopy.

    abstract::Mixing of raw materials (drug+polymer) in the investigated mini pharma melt extruder is achieved by using co-rotating conical twin screws and an internal recirculation channel. In-line Raman spectroscopy was implemented in the barrels, allowing monitoring of the melt during processing. The aim of this study was twofol...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2016.11.065

    authors: Van Renterghem J,Kumar A,Vervaet C,Remon JP,Nopens I,Vander Heyden Y,De Beer T

    更新日期:2017-01-30 00:00:00

  • Sterilization of implantable polymer-based medical devices: A review.

    abstract::This review article is focused on the sterilization techniques used for polymer-based implantable medical devices as well as the regulatory aspects governing sterile medical devices. Polymeric materials are increasingly used in implantable devices due to their biodegradable and biocompatible nature. Patients and medic...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章,评审

    doi:10.1016/j.ijpharm.2017.12.003

    authors: Tipnis NP,Burgess DJ

    更新日期:2018-06-15 00:00:00

  • In vitro biocompatibility studies with the experimental anticancer agent BIBX1382BS.

    abstract::The novel anticancer agent BIBX1382BS is a representative of the human epidermal growth factor receptor (EGFR) tyrosine kinase inhibitors. BIBX1382BS, for parenteral use, is formulated pharmaceutically as a lyophilized product containing 100 mg BIBX1382BS per dosage unit. This in vitro study was performed to establish...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/s0378-5173(99)00389-0

    authors: Nuijen B,Bouma M,Henrar RE,Brauns U,Bette P,Bult A,Beijnen JH

    更新日期:2000-01-25 00:00:00

  • In vitro evaluation of the dissolution behaviour of itraconazole in bio-relevant media.

    abstract::Drugs in the gastrointestinal tract are exposed to a medium of partially digested food, comprising mixtures of fat, protein and carbohydrate. The dissolution behaviour of itraconazole was evaluated in bio-relevant media which were developed to take this into account. Media containing milk with different fat contents, ...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2008.09.003

    authors: Ghazal HS,Dyas AM,Ford JL,Hutcheon GA

    更新日期:2009-01-21 00:00:00

  • Redox-responsive microbeads containing thiolated pectin-doxorubicin conjugate inhibit tumor growth and metastasis: An in vitro and in vivo study.

    abstract::The objective of this study was to investigate the in vitro cytotoxicity and in vivo anticancer efficacy of redox-responsive microbeads containing thiolated pectin-doxorubicin (DOX) conjugate. Oral microbeads were coated with an enteric polymer to protect the drug from release in the upper gastrointestinal (GI) tract ...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2018.04.052

    authors: Cheewatanakornkool K,Niratisai S,Dass CR,Sriamornsak P

    更新日期:2018-07-10 00:00:00

  • Effects of carriers on transgene expression from plasmids containing a DNA sequence with high histone affinity.

    abstract::The intranuclear disposition of plasmid DNA is highly important for transgene expression. The effects of a left-handedly curved sequence with high histone affinity on transgene expression were examined in COS-7 cells with two kinds of carriers (Lipofectamine Plus and TransIT-LT1). Three plasmids containing the curved ...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2009.04.032

    authors: Kamiya H,Fukunaga S,Ohyama T,Harashima H

    更新日期:2009-07-06 00:00:00

  • Preparation and characterization of 4-dedimethylamino sancycline (CMT-3) loaded nanostructured lipid carrier (CMT-3/NLC) formulations.

    abstract::Chemically modified tetracyclines (CMTs) have been reported to strongly inhibit proliferation and metastasis of various cancers, but their efficacy is restricted by poor water solubility. In the present study, a hydrophilic 4-dedimethylamino sancycline (CMT-3) loaded nanostructured lipid carrier (CMT-3/NLC) was produc...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2013.04.021

    authors: Yang X,Zhao L,Almasy L,Garamus VM,Zou A,Willumeit R,Fan S

    更新日期:2013-06-25 00:00:00

  • Influence of formulation on jet nebulisation quality of alpha 1 protease inhibitor.

    abstract::As foam appears during solution constitution and nebulisation of alpha 1 protease inhibitor (alpha 1 PI), we selected in a previous work, antifoams likely to be associated with an alpha 1 PI solution to be nebulised: span 65 at a 0.025% concentration and cetyl alcohol at a 0.05% concentration associated with tyloxapol...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/s0378-5173(98)00354-8

    authors: Flament MP,Leterme P,Burnouf T,Gayot A

    更新日期:1999-02-01 00:00:00

  • Development of a novel sodium fusidate-loaded triple polymer hydrogel wound dressing: Mechanical properties and effects on wound repair.

    abstract::To develop a novel sodium fusidate-loaded triple polymer hydrogel dressing (TPHD), numerious polyvinyl alcohol-based (PVA) hydrogel dressings were prepared with various hydrophilic polymers using the freeze-thaw method, and their hydrogel dressing properties were assessed. Among the hydrophilic polymers tested, sodium...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2015.12.007

    authors: Jin SG,Kim KS,Kim DW,Kim DS,Seo YG,Go TG,Youn YS,Kim JO,Yong CS,Choi HG

    更新日期:2016-01-30 00:00:00

  • Interaction of cationic partial dendrimers with charged and neutral liposomes.

    abstract::Amphipathic partial dendrimers having three lipidic (C(14)) chains coupled to dendritic lysine head groups with eight, 16 or 32 free terminal amino groups have been synthesised by solid-phase peptide synthesis. Liposomes were prepared with positive, negative and neutral charge using the dehydration-rehydration method ...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/s0378-5173(00)00635-9

    authors: Purohit G,Sakthivel T,Florence AT

    更新日期:2001-02-19 00:00:00

  • New studies on leachables in commercial scale protein drug filling lines using stir bar sorptive extraction coupled with TD-GC-MS and UPLC/QTOF-MS/MS analytics.

    abstract::The increasing application of Single-Use Systems (SUSs) in pharmaceutical manufacturing lines poses a potential risk of polymer-related impurities leaching into the process stream and persisting through the manufacturing process. To minimize any potential toxicity and impairment to the product's quality, safety thresh...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2018.11.033

    authors: Scherer N,Marcseková K,Posset T,Winter G

    更新日期:2019-01-30 00:00:00

  • Recent advances in TPGS-based nanoparticles of docetaxel for improved chemotherapy.

    abstract::Docetaxel (DTX) is one of the important antitumor drugs, being used in several common chemotherapies to control leading cancer types. Severe toxicities of the DTX are prominent due to sudden parenteral exposure of desired loading dose to maintain the therapeutic concentration. Field of nanotechnology is leading to res...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章,评审

    doi:10.1016/j.ijpharm.2017.07.018

    authors: Choudhury H,Gorain B,Pandey M,Kumbhar SA,Tekade RK,Iyer AK,Kesharwani P

    更新日期:2017-08-30 00:00:00

  • Diclofenac-β-cyclodextrin for colonic drug targeting: In vivo performance in rats.

    abstract::The aim of this in vivo study was to assess the ability of the prodrug conjugate diclofenac-β-cyclodextrin to release diclofenac in the colon following oral administration, using sulfapyridine (a metabolite of sulfasalazine) as a marker of colonic absorption. Two groups of rats were used; the test rats received a susp...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2016.01.024

    authors: Vieira AC,Serra AC,Veiga FJ,Gonsalves AM,Basit AW,Murdan S

    更新日期:2016-03-16 00:00:00

  • Mechanistic study on rapid fabrication of fibrous films via centrifugal melt spinning.

    abstract::Fibrous films have attracted considerable attention in the field of drug delivery and wound dressings owing to their porous structure and highly aligned fiber orientation. However, current fabrication methods such as electrospinning have certain limitations, including high voltage requirement and conductivity dependen...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2019.02.005

    authors: Yang Y,Zheng N,Zhou Y,Shan W,Shen J

    更新日期:2019-04-05 00:00:00

  • Investigation of the parameters used in fused deposition modeling of poly(lactic acid) to optimize 3D printing sessions.

    abstract::This study assesses the feasibility of printing implantable devices using 3D printing Fused deposition modeling (FDM) technology. The influence of the deposition temperature, the deposition rate and the layer thickness on the printing process and the physical properties of the devices were evaluated. The filaments wer...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2019.05.008

    authors: Carlier E,Marquette S,Peerboom C,Denis L,Benali S,Raquez JM,Amighi K,Goole J

    更新日期:2019-06-30 00:00:00

  • Polymorphs and pharmacokinetics of an antipsychotic drug candidate.

    abstract::A potent antipsychotic drug candidate, 7-(4-(4-(6-fluorobenzo[d]-isoxazol-3-yl)-piperidin-1-yl)butoxy)-4-methyl-8-chloro -2H-chromen-2-one mesylate(CY611), with good in vitro and in vivo antipsychotic effects was investigated for preformulation evaluation by crystallography methods. Three anhydrous polymorphs(Form I-I...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2020.119600

    authors: Hao C,Chen Y,Xiong J,Yang Z,Gao L,Liu BF,Liu X,Jin J,Zhang G

    更新日期:2020-08-30 00:00:00

  • Data-smart machine learning methods for predicting composition-dependent Young's modulus of pharmaceutical compacts.

    abstract::The ability to predict mechanical properties of compacted powder blends of Active Pharmaceutical Ingredients (API) and excipients solely from component properties can reduce the amount of 'trial-and-error' involved in formulation design. Machine Learning (ML) can reduce model development time and effort with the imper...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2020.120049

    authors: Thomas S,Palahnuk H,Amini H,Akseli I

    更新日期:2021-01-05 00:00:00

  • 3D printed medicines: A new branch of digital healthcare.

    abstract::Three-dimensional printing (3DP) is a highly disruptive technology with the potential to change the way pharmaceuticals are designed, prescribed and produced. Owing to its low cost, diversity, portability and simplicity, fused deposition modeling (FDM) is well suited to a multitude of pharmaceutical applications in di...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章,评审

    doi:10.1016/j.ijpharm.2018.07.024

    authors: Awad A,Trenfield SJ,Gaisford S,Basit AW

    更新日期:2018-09-05 00:00:00

  • Dependency of cyclosporine tissue distribution and metabolism on the age and gender of rats after a single intravenous dose.

    abstract::In a previous study we demonstrated the dependency of cyclosporine (CyA) pharmacokinetics on the age and gender of Wistar rats given 10 mg/kg intravenously. The present study has been conducted under the same experimental conditions (10 mg/kg as a single intravenous dose) to identify the mechanisms behind such differe...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/s0378-5173(99)00461-5

    authors: Molpeceres J,Chacón M,Guzmán M,Aberturas MR,Berges L

    更新日期:2000-03-20 00:00:00

  • Enhanced solubility and modified release of poorly water-soluble drugs via self-assembled gelatin-oleic acid nanoparticles.

    abstract::Recently, we synthesized novel amphiphilic gelatin-oleic acid (GO) conjugate to prepare self-assembled nanoparticles for drug delivery. The aim of this study was to investigate pharmaceutical potentialities of self-assembled GO nanoparticles for solubility enhancement and modified release of poorly water-soluble drugs...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2013.07.025

    authors: Tran PH,Tran TT,Lee BJ

    更新日期:2013-10-15 00:00:00

  • Novel drug delivery strategies for improving econazole antifungal action.

    abstract::Econazole is a commonly used azole antifungal in clinical treatment of superficial fungal infections. It is generally used as conventional cream and gel preparations under the brand names of Spectazole (United States), Ecostatin (Canada), Pevaryl (Western Europe). Treatment efficiency of antifungal drugs depends on th...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章,评审

    doi:10.1016/j.ijpharm.2015.09.015

    authors: Firooz A,Nafisi S,Maibach HI

    更新日期:2015-11-10 00:00:00