Abstract:
:In addition to unidirectional laminates and short fiber reinforcements for compression bone plate developments in the literature, we have proposed using a textile structure, i.e. braid preform, for this purpose. In the present paper, the influence of braiding angles and plate thicknesses on the bending performance of the braided composite bone plates is investigated. As a result, the influence of the braiding angle, varied in a certain range, on the plate bending properties is not significant when the plate thickness is thin. This influence becomes higher with an increase in the plate thickness. A 10 degrees braiding angle has been seen to be appropriate for all the cases under consideration. The present study indicates that the braided composite plate with 2.6mm thickness can be suitable for forearm treatment whereas the braided composite plate of 3.2mm thickness is applicable to femur or tibia fixation.
journal_name
Biomaterialsjournal_title
Biomaterialsauthors
Fujihara K,Huang ZM,Ramakrishna S,Satknanantham K,Hamada Hdoi
10.1016/s0142-9612(03)00065-6keywords:
subject
Has Abstractpub_date
2003-07-01 00:00:00pages
2661-7issue
15eissn
0142-9612issn
1878-5905pii
S0142961203000656journal_volume
24pub_type
杂志文章相关文献
BIOMATERIALS文献大全abstract::Fibrosis affects most organs, it results in replacement of normal parenchymal tissue with collagen-rich extracellular matrix, which compromises tissue architecture and ultimately causes loss of function of the affected organ. Biochemical pathways that contribute to fibrosis have been extensively studied, but the role ...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2014.07.048
更新日期:2014-12-01 00:00:00
abstract::Nickel-titanium (NiTi, nitinol) shape memory alloy was nitrided using an original powder immersion reaction assisted coating (PIRAC) method in order to modify its surface properties. PIRAC nitriding method is based on annealing the samples in the atmosphere of highly reactive nitrogen supplied by decomposition of unst...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(00)00368-9
更新日期:2001-07-01 00:00:00
abstract::Polyelectrolyte complexes (PEC) were prepared from chitosan as the polycation and several synthesized functional anion polysaccharides, and their effects on cell attachment, morphology, proliferation and differentiation were estimated using normal human osteoblasts (NHOst). After a 1-week incubation, PEC made from pol...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2005.01.041
更新日期:2005-09-01 00:00:00
abstract::In this work, we studied the shell structure of the Nautilus pompilius Linnaeus by using analytical techniques of scanning (SEM) and transmission electron microscopy (TEM) and X-ray diffraction. The main objective of this study is the structural characterization of Nautilus shell at different length levels, from micro...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2006.04.003
更新日期:2006-09-01 00:00:00
abstract::Copolymers of N-(2-hydroxypropyl)methacrylamide (HPMA) are prototypic and well-characterized polymeric drug carriers that have been broadly implemented in the delivery of anticancer therapeutics. To demonstrate that polymers, as liposomes, can be used for simultaneously delivering multiple chemotherapeutic agents to t...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2009.02.040
更新日期:2009-07-01 00:00:00
abstract::For a temporomandibular joint prosthesis, an estimation of the wear rate was needed, prior to patient application. Therefore, we determined the in vitro wear rate of the ball-socket articulation of this prosthesis, consisting of a metal head and an ultra-high molecular weight polyethylene (UHMWPE) cup. The basic testi...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(99)00042-3
更新日期:1999-08-01 00:00:00
abstract::An implantable, anti-microbial delivery device for the treatment of periodontal disease has been developed. In this polymer-based delivery system, the encapsulation efficiency, release characteristics, and bioactivity of anti-microbial agent were controlled by the complexation of the drug with cyclodextrins of differi...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2003.09.113
更新日期:2004-08-01 00:00:00
abstract::Monocytes/Macrophages have long been recognized as key players in inflammation and wound healing and are often employed in vitro to gain an understanding of the inflammatory response to biomaterials. Previous work has demonstrated a drastic decrease in primary monocyte adherent density on biomaterial surfaces coupled ...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2011.09.044
更新日期:2012-01-01 00:00:00
abstract::The hydrophilic nature of hydrogel matrices makes them disadvantageous to entrap poorly soluble therapeutic agents and greatly restricts their applications as drug-delivery systems. In this study, we demonstrated that sustained delivery of lipophilic drugs in hydrogel-based devices can be readily achieved by enhancing...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2008.12.047
更新日期:2009-04-01 00:00:00
abstract::Hydrogels based on ethoxytriethyleneglycol monomethacrylate/methyl methacrylate copolymers were prepared by free radical polymerization at 70 degrees C in bulk with 2,2'-azobisisobutyronitrile as initiator. The swelling behaviour of the hydrogels was studied by immersion of the films in water and in buffered solutions...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(96)00091-9
更新日期:1997-04-01 00:00:00
abstract::Since the pore size distribution of a material in contact with bone is decisive for its type of link with the tissue, many granules are commercially available as fillers and as bone reconstructing materials. We propose a new technological procedure. The optimum architectural design for obtaining the most suitable link...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/0142-9612(94)90228-3
更新日期:1994-05-01 00:00:00
abstract::The widespread use of synthetic transvaginal polypropylene mesh for treating Pelvic Organ Prolapse (POP) has been curtailed due to serious adverse effects highlighted in 2008 and 2011 FDA warnings and subsequent legal action. We are developing new synthetic mesh to deliver endometrial mesenchymal stem cells (eMSC) to ...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2019.119495
更新日期:2019-12-01 00:00:00
abstract::Thin sheets of nanofibrous (NF) poly(L-lactic acid) (PLLA) matrix were fabricated using a novel phase separation method, mimicking the structure of natural collagen fibers. In this study, the cell morphology, cytoskeleton and adhesion structure, proliferation and differentiation were investigated on NF PLLA matrix usi...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2008.06.015
更新日期:2008-10-01 00:00:00
abstract::A bilayer artificial skin composed of a silicone sheet and a collagen sponge sheet was developed by us in 1986, modifying Yannas and Burke's technique. It was used in experimental animals and clinically, both with success; but the artificial skin was inconvenient for clinical use in terms of disinfection and preservat...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/0142-9612(93)90197-a
更新日期:1993-10-01 00:00:00
abstract::Primary rat bone marrow cells were cultured for periods of 8 d on hydroxyapatite discs produced by sintering compressed powder at 1130 degrees C. The disc surfaces were roughened using silicon carbide paper to create three groups of samples (n = 10) of differing surface topography. The culture conditions permitted bot...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/0142-9612(93)90216-o
更新日期:1993-01-01 00:00:00
abstract::To prevent bone metastasis, we developed polyethylene glycol (PEG)-conjugated aspartic acid (Asp)-modified liposomes (PEG-Asp-Lipo) as a bone-targeting carrier of paclitaxel (PTX) by using Asp-modified 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine (DPPE-Asp). The affinity of Asp-modified liposomes to hydroxyapatite...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2017.10.053
更新日期:2018-02-01 00:00:00
abstract::The goal of this study was to develop a polymeric carrier for delivery of anti-tumor drugs and sustained release of these agents in order to optimize anti-tumor activity while minimizing systemic effects. We used oligo(poly(ethylene glycol) fumarate) (OPF) hydrogels modified with small negatively charged molecules, so...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2010.06.054
更新日期:2010-11-01 00:00:00
abstract::A tissue-engineered bone has become a viable alternative to autologous bone for bone augmentation in atrophy alveolar ridge. The aim of the present study was to evaluate porous beta-tricalcium phosphate (beta-TCP) combined with autologous osteoblasts to augment edentulous alveolar ridge in a canine model. Autologous o...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2008.12.067
更新日期:2009-05-01 00:00:00
abstract::Superparamagnetic magnetite nanoparticles (MNP) coated with silica were synthesized and chronically implanted into the middle ear epithelial tissues of a guinea pig model (n=16) for the generation of force by an external magnetic field. In vivo limitations of biocompatibility include particle morphology, size distribu...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2004.06.040
更新日期:2005-05-01 00:00:00
abstract::The human heart cannot regenerate after an injury. Lost cardiomyocytes are replaced by scar tissue resulting in reduced cardiac function causing high morbidity and mortality. One possible solution to this problem is cardiac tissue engineering. Here, we have investigated the suitability of non-mulberry silk protein fib...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2011.12.036
更新日期:2012-03-01 00:00:00
abstract::This study was designed to explore the feasibility of using cartilage-derived morphogenetic protein-1 (CDMP1) induced dermal fibroblasts (DFs) as seed cells and polyglycolide (PGA) as scaffold for fibrocartilage engineering. DFs isolated from canine were expanded and seeded on PGA scaffold to fabricate cell/scaffold c...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2009.02.027
更新日期:2009-07-01 00:00:00
abstract::Cell labeling using magnetic nanoparticles is an increasingly used approach in noninvasive behavior tracking, in vitro separation of cancer stem cells (CSCs), and CSC-based research in cancer therapy. However, the impact of magnetic labeling on the biological properties of targeted CSCs, such as self-renewal, prolifer...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2012.01.058
更新日期:2012-05-01 00:00:00
abstract::Polysaccharides are increasingly being used as biomaterials for tissue engineering and regenerative medicine. Quantitative analysis of gene expression from cells in three-dimensional (3D) scaffolds requires extraction of messenger RNA, which is complicated in polysaccharide materials by ionic complexing between nuclei...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2009.11.024
更新日期:2010-03-01 00:00:00
abstract::Tubular vessels for tissue engineering are typically fabricated using a molding, dipping, or electrospinning technique. While these techniques provide some control over inner and outer diameters of the tube, they lack the ability to align the polymers or fibers of interest throughout the tube. This is an important asp...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2008.08.025
更新日期:2008-12-01 00:00:00
abstract::Biodegradable tissue engineering scaffolds are commonly fabricated from poly(lactide-co-glycolide) (PLGA) or similar polyesters that degrade by hydrolysis. PLGA hydrolysis generates acidic breakdown products that trigger an accelerated, autocatalytic degradation mechanism that can create mismatched rates of biomateria...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2014.01.026
更新日期:2014-04-01 00:00:00
abstract::This study examines the early shrinkage behaviour of dental composite resins, and in particular the interfacial stresses around the margins of a composite restoration. The development of stresses at the restoration-tooth interface can have a detrimental effect on the longevity of a restoration. The influence of this i...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(01)00058-8
更新日期:2001-12-01 00:00:00
abstract::Thin and defect-free calcium phosphate films with a Ca/P ratio of 1.62 were formed by electron-beam evaporation. The as-deposited films had average bonding strengths to the metal implants of 64.8 MPa and the dissolution rates of 47.5 nm/h in isotonic saline solutions. The interface mechanical characteristics and histo...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(01)00147-8
更新日期:2002-01-01 00:00:00
abstract::This study reports the effect of varying the thickness of a commercial zinc polycarboxylate dental cement on its adhesion in a metal-to-metal single lap joint. The thickness was controlled externally in a specially designed apparatus, rather than by the inclusion of isodimensional glass spheres, as has been done previ...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/0142-9612(95)98279-n
更新日期:1995-01-01 00:00:00
abstract::Here, scaffolds as cell and tissue carriers are approached from an engineering point of view, emphasizing material superstructuring in the design of supports. Superstructure engineering provides optimal spatial and nutritional conditions for cell maintenance by the arrangement of structural elements (e.g. pores or fib...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/0142-9612(96)85753-x
更新日期:1996-01-01 00:00:00
abstract::Acellular porcine cornea stroma (APCS) prepared using pancreatic phospholipase A(2) was proven to be promising corneal scaffold. However, its dense ultrastructure provides insufficient space that prevents the seeded cells from organizing into a functional tissue. In this report, freezing dry APCS (FD-APCS) biomaterial...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2011.05.084
更新日期:2011-10-01 00:00:00