Abstract：
OBJECTIVES:To determine at 5 year follow-up the failure rate, wear rates and other aspects of clinical performance of direct composite inlays compared with conventional composite restorations placed incrementally. METHODS:100 matched pairs of restorations were originally entered into the trial. Each pair consisted of a direct composite inlay and a conventional composite restoration made from the same material. At 5 years it was possible to recall 65 pairs, of which 54 were complete. Clinical assessments were made using USPHS criteria (indirect measurements of occlusal wear were made using Ivoclar standard dies) and annual bite wing radiographs. RESULTS:There was a trend to more failure of inlays than conventional composites (17.4 c.f. 7.5%) but this was not significant. The clinical performance of both types of restoration was similar and compared favourably with the results of studies of other materials. Secondary decay was diagnosed in only one restoration. Between 3 and 5 years there was some deterioration in cavo-marginal discoloration, marginal adaptation (occlusally) and surface roughness (occlusally). There was no apparent deterioration in colour match, proximal contact, shim stock contacts and Gingival Index. Wear rates of both types of restoration showed no significant difference and were essentially linear with a mean of 33-34 microm per year. CONCLUSIONS:Both inlays and conventional composite restorations complied with ADA specification minimum requirements for posterior composite restorations. In this study the direct inlay technique gave no clinical advantage over conventional, incremental placement.
journal_name
J Dentjournal_title
Journal of dentistryauthors
Wassell RW,Walls AW,McCabe JFdoi
10.1016/s0300-5712(00)00013-0keywords:
subject
Has Abstractpub_date
2000-08-01 00:00:00pages
375-82issue
6eissn
0300-5712issn
1879-176Xpii
S0300-5712(00)00013-0journal_volume
28pub_type
杂志文章abstract：OBJECTIVES:To evaluate the efficacy of different bleaching systems on artificially created stained-remineralized caries lesions; and to assess the susceptibility of the bleached lesions to further demineralization. METHODS:Human enamel specimens were sectioned, polished, demineralized, and randomly divided into six gr...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2018.12.008
更新日期：2019-02-01 00:00:00
abstract：OBJECTIVES:All-ceramic crowns have become increasingly used also in the posterior regions, but there are only few studies documenting the clinical outcome of these restorations. The aim was therefore to present the 3-year outcome of zirconia (NobelProcera) single crowns. METHODS:All patients treated with porcelain-ven...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2009.06.002
更新日期：2009-09-01 00:00:00
abstract：OBJECTIVES:This study aimed to assess the effect of curing conditions--exposure time, mode, energy density, and exposure distance--on the mechanical properties of high-viscosity bulk-fill resin-based composites (RBCs) measured at simulated clinical relevant filling depths. METHODS:Three high-viscosity bulk-fill RBCs w...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2014.05.012
更新日期：2014-08-01 00:00:00
abstract：OBJECTIVES:Host modifying factors, such as genetic predisposition, may increase severity of periodontitis. Genetic polymorphisms in interleukin-4 (IL-4) genes seem to influence host response to microbial challenge. Two IL-4 polymorphisms were found in association with asthma and atopy, and later with aggressive periodo...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2003.11.004
更新日期：2004-03-01 00:00:00
abstract：OBJECTIVE:To analyse the DIAGNOdent's performance to longitudinally monitor the arrestment of non-cavitated carious lesions in occlusal surfaces. METHODS:The sample consisted of 15 children (12-13 years old) with 40 active non-cavitated lesions. The protocol for the examinations was: prophylaxis, drying teeth for 30s;...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2007.05.005
更新日期：2007-08-01 00:00:00
abstract：OBJECTIVES:This prospective clinical study compared the performance of implant-retained (study group) and tooth-retained (control) zirconia based fixed dental prostheses (FDPs) with at least 4 units. The null-hypothesis stated that complication rates in both groups are equally distributed. METHODS:The study included p...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2014.10.011
更新日期：2015-01-01 00:00:00
abstract：OBJECTIVES:To investigate the influence of matrix and filler content on degradation resistance of an experimental pure-ormocer and an dimethacrylate-based composite derived from a commercially available material. MATERIALS AND METHODS:A dimethacrylate- Grandio (GR) and a model pure ormocer-based-matrix ORMOCER (ORM) w...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2011.10.012
更新日期：2012-01-01 00:00:00
abstract：:Meta-analysis is a formalized method of combining results of different studies to provide conclusions about the effectiveness of a treatment modality. The aims of this study were to use meta-analysis to determine the clinical performance of posterior composite restorations using the assessment criteria of the USPHS gu...
journal_title：Journal of dentistry
pub_type： 杂志文章,meta分析
doi：10.1016/0300-5712(94)90143-0
更新日期：1994-02-01 00:00:00
abstract：OBJECTIVE:The fracture of bonded ceramic to metal restorations remains a problem in clinical dental practice. The use of resin based composites to repair such fractures is generally unsatisfactory. Tribochemical technology creates a surface layer of small silica particles fused to the surface substrate. Such a layer po...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/s0300-5712(00)00006-3
更新日期：2000-08-01 00:00:00
abstract：OBJECTIVES:The use of thio-urethane oligomers has been shown to significantly improve the mechanical properties of resin cements (RCs). The aim of this study was to use thio-urethane-modified RC to potentially reinforce the porcelain-RC structure and to improve the bond strength to zirconia and lithium disilicate. MET...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2018.04.002
更新日期：2018-06-01 00:00:00
abstract：OBJECTIVES:The objective of this study was to investigate the corrosion resistance of the prototype iron-platinum (FePt) magnets and non-encapsulated neodymium-iron-boron (NdFeB) magnets in three different pH environments. METHODS:The corrosion resistance of the magnets was studied using a corrosion indicator, the bre...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2004.02.007
更新日期：2004-08-01 00:00:00
abstract：OBJECTIVES:The objectives of this study were two-fold: (1) to determine (by surfometry) loss of deciduous and permanent enamel and dentine following 15days' exposure to a single low pH orange drink; and (2) to determine (by surfometry) loss of deciduous and permanent enamel and dentine following exposure to the product...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/s0300-5712(99)00074-3
更新日期：2000-05-01 00:00:00
abstract：OBJECTIVES:To evaluate the effect of addition of zinc oxide and copper nanoparticles (ZnO/CuNp) into universal adhesives, on antimicrobial activity (AMA), cytotoxicity (CTX), water sorption (WS) and solubility (SO), microhardness (MH) and in vitro degree of conversion (DC), as well as resin-dentin microtensile bond str...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2019.01.012
更新日期：2019-03-01 00:00:00
abstract：:The purpose of this study was to evaluate the effect of a coaxial carbon dioxide/neodymium:yttrium aluminium garnet laser beam on enamel surface roughness and the dental pulps of mongrel dogs. In four dogs, four maxillary left posterior teeth were irradiated at 16 cm source-tooth distances. Two teeth were irradiated w...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/0300-5712(91)90095-g
更新日期：1991-04-01 00:00:00
abstract：OBJECTIVES:The aim of this study was to investigate new dentin bonding agents formulated with 2,3-epithiopropyl methacrylate (ETMA) comonomer blends. METHODS:Synthesis and characterization of ETMA were performed. Adhesive resins with three different ETMA concentrations (0.1, 1 and 10 wt.%) were prepared. To comparison...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2005.11.001
更新日期：2006-08-01 00:00:00
abstract：:Some laboratory tests of impression material accuracy mimic the clinical situation (simulatory) while others attempt to quantify a material's individual properties. This review concentrates on simulatory testing and aims to give a classification of the numerous tests available. Measurements can be made of the impressi...
journal_title：Journal of dentistry
pub_type： 杂志文章,评审
doi：10.1016/0300-5712(92)90117-u
更新日期：1992-04-01 00:00:00
abstract：OBJECTIVES:The purpose of this study was to characterize changes in surface topography associated with different surface treatments and their effect on tensile bond strength (TBS) of repaired water-aged anterior restorative micro-fine hybrid resin composite. METHODS:The TBS of repaired resin-based composite slabs eith...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2008.07.014
更新日期：2008-12-01 00:00:00
abstract：OBJECTIVES:This longitudinal randomized controlled clinical trial evaluated the longevity of composite resin inlays in single- or multi-surface cavities up to 4 years. METHODS:21 dental students placed 75 Artglass and 80 Charisma composite resin inlays in class I and II cavities in posterior teeth (89 adult patients) ...
journal_title：Journal of dentistry
pub_type： 杂志文章,随机对照试验
doi：10.1016/j.jdent.2011.04.005
更新日期：2011-07-01 00:00:00
abstract：OBJECTIVES:The aim of this study was to compare four finishing/polishing systems (F/P) on surface roughness and gloss of different resin composites. METHODS:A total of 40 disc samples (15 mm × 3 mm) were prepared from a nanofill - Filtek Supreme Plus (FS) and a micro-hybrid resin composite - Esthet-X (EX). Following 2...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2011.01.006
更新日期：2011-07-01 00:00:00
abstract：OBJECTIVE:To compare the mechanical behavior, and infer differences in fracture resistance, of mandibular molars with amalgam and composite MOD restorations to that of an unrestored molar. METHOD:Finite element models were developed for an unrestored molar and molars with MOD amalgam and composite restorations. The lo...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/s0300-5712(00)00036-1
更新日期：2001-01-01 00:00:00
abstract：OBJECTIVE:to assess the expectations, perceptions and performance of different operators with varying backgrounds and training in the use of full-arch intraoral scanning (IOS). METHODS AND MATERIALS:Dentists (DENT), postgraduate dental students (DPG), and student prosthetists (PROS) were invited to join an IOS trainin...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2020.103572
更新日期：2020-12-29 00:00:00
abstract：OBJECTIVES:Health condition of the gingival tissues contacting the surfaces of fixed prostheses is a result of multiple etiologic factors. The aim of the investigation discussed here was to evaluate the attachment and proliferation rate of cultured human epithelial cells on three commonly used restorative materials und...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2013.11.008
更新日期：2014-01-01 00:00:00
abstract：PURPOSE:Develop a methodology to correlate microtensile bond strength (microTBS) and leakage within the same site of a specimen and evaluate the predominate debond and leakage pathways. MATERIALS AND METHODS:A Class II (MO) slot cavity was prepared in 37 extracted human molars and restored with indirect resin composit...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/s0300-5712(00)00065-8
更新日期：2001-02-01 00:00:00
abstract：OBJECTIVE:The main aim of this in vitro study was to evaluate the influence of Streptococcus mutans on the corrosion of titanium. METHODS:S. mutans biofilms were formed on commercially pure titanium (CP-Ti) square samples (10mm×10mm×1mm) using a culture medium enriched with sucrose. Open circuit potential (OCP) and el...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2013.03.008
更新日期：2013-06-01 00:00:00
abstract：OBJECTIVES:The objective of the study was to determine the perceptibility and acceptability thresholds for dental ceramics using CIEDE2000 (ΔE(00)) and CIELAB (ΔE(ab)(*)) color difference formulas and a novel TSK Fuzzy Approximation. METHODS:A 13-observer panel performed independent observations of perceptibility and ...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2010.07.008
更新日期：2010-01-01 00:00:00
abstract：OBJECTIVES:To investigate the effect of impregnation of poly(ethyl methacrylate) and tetrahydro-furfuryl methacrylate (PEM/THFM) polymeric delivery system with chlorhexidine or fluconazole on its shear bond strength (SBS) and water sorption. METHODS:For SBS testing, 16 PEM/THFM discs impregnated with chlorhexidine (CH...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2012.04.027
更新日期：2012-08-01 00:00:00
abstract：INTRODUCTION:Tooth surface loss (TSL) is an increasingly recognised problem. We are therefore seeing an increase in the number and complexity of in vitro studies investigating factors that modify effects at the tooth surface. AIM:The aim of this paper is to provide a narrative review that illustrates the more commonly...
journal_title：Journal of dentistry
pub_type： 杂志文章,评审
doi：10.1016/j.jdent.2010.01.002
更新日期：2010-03-01 00:00:00
abstract：OBJECTIVES:This clinical study evaluated the long-term outcome and survival rate of all-ceramic cantilever resin-bonded fixed dental prostheses (RBFDPs) made of zirconia-ceramic with a single-retainer design to replace missing incisors. In addition, whether the reason for missing incisors has an influence on the longev...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2017.07.003
更新日期：2017-10-01 00:00:00
abstract：OBJECTIVES:Chlorhexidine (CHX) is a commonly used antiseptic mouthwash, used by dental practitioners and the public, due to its antimicrobial effects. The aim of this article was to provide a narrative review of current antimicrobial uses of CHX relevant to dentistry in the context of oral diseases, highlighting need f...
journal_title：Journal of dentistry
pub_type： 杂志文章,评审
doi：10.1016/j.jdent.2020.103497
更新日期：2020-12-01 00:00:00
abstract：OBJECTIVES:This study evaluated the effect of a chromium interlayer deposited by electroplating on the adhesion between titanium and porcelain by means of strain energy release rate (G-value (J/m(2)) or interfacial toughness). METHODS:Seventy rectangular specimens of commercially pure titanium (CP Ti) plates grade II ...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2010.05.003
更新日期：2010-08-01 00:00:00
