Abstract:
:The objective of this study was to determine the influence of mechanical stresses simulating gastrointestinal contraction forces of 2.0 N (stomach) and 1.2 N (intestine) on the gel properties and drug release characteristics from sustained release swelling and eroding hydrophilic matrices during dissolution studies. Two batches of tetracycline-sustained release tablets containing hydroxypropyl methyl cellulose (HPMC) were manufactured and subjected to USP apparatus II (pH 2.2 buffer) dissolution studies. Hydrated tablets were periodically removed, placed in a petri dish, and multiple times (six cycle) compressed with a flat-ended probe (diameter 1.3 cm) on a texture analyzer at preprogrammed force of either 2.0 or 1.2 N to determine force-distance profiles and changes in drug release rate. The calculated similarity factor values showed dissimilar dissolution profiles using standard dissolution profile as a reference. The similarity factor (f2) values were especially lower than 50 at 2.0 N and, when profiles between the two batches compressed at 1.2 and 2.0 N, were compared with each other. The changes in dissolution pattern and release rate were significantly different after 4 h of dissolution. At 8 h, tablets were fully hydrated and no force could be detected by the probe, indicating a very soft gel matrix. It appears that the contraction forces in the stomach and intestine are capable of altering drug release from modified release hydrophilic matrices during transit in the human GI tract. Accounting for these forces during dissolution can enhance predictions of in vivo drug release, achieve better in vitro and in vivo correlation, introduce improvement in dissolution methods, and better understand the critical quality attributes (CQAs) and factors in quality by design (QbD) during the product development process.
journal_name
AAPS PharmSciTechjournal_title
AAPS PharmSciTechauthors
Takieddin M,Fassihi Rdoi
10.1208/s12249-014-0225-5subject
Has Abstractpub_date
2015-04-01 00:00:00pages
278-83issue
2issn
1530-9932journal_volume
16pub_type
杂志文章abstract::Nanotechnology is having a significant impact in the drug delivery systems and diagnostic devices. As most of the nanosystems are intended to be administered in vivo, there is a need for stability models, which could simulate the biological environment. Instability issues could lead to particle aggregation and in turn...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-016-0597-9
更新日期:2017-05-01 00:00:00
abstract::The aim of this study was to formulate a new delivery system for ecological pesticides by the incorporation of Artemisia arborescens L essential oil into solid lipid nanoparticles (SLN). Two different SLN formulations were prepared following the high-pressure homogenization technique using Compritol 888 ATO as lipid a...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/pt070102
更新日期:2006-01-03 00:00:00
abstract::The objective of this study was to prepare and evaluate terbutaline sulphate (TBS) bi-layer tablets for once-daily administration. The bi-layer tablets consisted of an immediate-release layer and a sustained-release layer containing 5 and 10 mg TBS, respectively. The sustained-release layer was developed by using Comp...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-015-0404-z
更新日期:2016-06-01 00:00:00
abstract::A simple, reliable, highly sensitive and selective spectrofluorimetric method has been developed for determination of certain aminoglycosides namely amikacin sulfate, tobramycin, neomycin sulfate, gentamicin sulfate, kanamycin sulfate and streptomycin sulfate. The method is based on the formation of a charge transfer ...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-013-9969-6
更新日期:2013-06-01 00:00:00
abstract::The purpose of this paper is to describe results from the use of a set of Excel macros written to facilitate the comparison of image analysis (IA) and laser diffraction (LD) particle size analysis (psa) data. Measurements were made on particle systems of differing morphological characteristics including differing aver...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/pt070369
更新日期:2006-08-18 00:00:00
abstract::The objective of the present study is to investigate the effect of hydrocarbon chain length in 1,2-alkanediols on percutaneous absorption of metronidazole (MTZ). Twelve formulations (1,2-propanediol, 1,2-butanediol, 1,2-pentanediol, 1,2-hexanediol in 4% concentration, 1,2-hexanediol, and 1,2-heptanediol in 1% concentr...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-013-0066-7
更新日期:2014-04-01 00:00:00
abstract::In this study, liquid crystalline nanoparticles (LCN) have been proposed as new carrier for topical delivery of finasteride (FNS) in the treatment of androgenetic alopecia. To evaluate the potential of this nanocarrier, FNS-loaded LCN was prepared by ultrasonication method and characterized for size, shape, in vitro r...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-012-9888-y
更新日期:2013-03-01 00:00:00
abstract::The aim of the present study was to develop and evaluate a buccal adhesive tablet containing ondansetron hydrochloride (OH). Special punches and dies were fabricated and used while preparing buccal adhesive tablets. The tablets were prepared using carbopol (CP 934), sodium alginate, sodium carboxymethylcellulose low v...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-009-9304-4
更新日期:2009-01-01 00:00:00
abstract::The influence of alkaline and the neutral grade of magnesium aluminometasilicate as a porous solid carrier for the liquid self-emulsifying formulation with ibuprofen is investigated. Ibuprofen is dissolved in Labrasol, then this solution is adsorbed on the silicates. The drug to the silicate ratio is 1:2, 1:4, and 1:6...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-014-0247-z
更新日期:2015-06-01 00:00:00
abstract::This work presents a new user-friendly lyophilization simulation and process optimization tool, freely available under the name LyoPRONTO. This tool comprises freezing and primary drying calculators, a design-space generator, and a primary drying optimizer. The freezing calculator performs 0D lumped capacitance modeli...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-019-1532-7
更新日期:2019-10-31 00:00:00
abstract::One of the current methods for cycle optimization in primary drying to is develop a graphical design space based on quality by design (QbD). In order to construct the design space, the vial heat transfer coefficient (Kv) is needed. This paper investigated experimental factors that can affect the Kv result, examined th...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-018-0998-z
更新日期:2018-05-01 00:00:00
abstract::The purpose of this research was to prepare and evaluate sustained release mucoadhesive tablets of Itraconazole. It is practically insoluble in aqueous fluids hence its solid dispersion with Eudragit E100 was prepared by spray drying. This was formulated in matrix of hydrophilic mucoadhesive polymers Carbopol 934P (CP...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-008-9119-8
更新日期:2008-01-01 00:00:00
abstract::The closed-die compaction behaviour of D-mannitol granules has been simulated by the discrete element method (DEM) to investigate the granule rearrangement and fracture behaviour during compaction which affects the compactibility of the tablet. The D-mannitol granules produced in a fluidized bed were modelled as agglo...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-017-0719-z
更新日期:2017-08-01 00:00:00
abstract::In previous studies, we developed and characterised multicompartmental microcapsules as a platform for the targeted oral delivery of lipophilic drugs in type 2 diabetes (T2D). We also designed a new microencapsulated formulation of probucol-sodium alginate (PB-SA), with good structural properties and excipient compati...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-014-0205-9
更新日期:2015-02-01 00:00:00
abstract::The purpose of this research was to evaluate the relation between preferential direction of pores and mechanical strength of cubic starch compacts. The preferential pore direction was quantified in SEM images of cross sections of starch compacts using a previously described algorithm for determination of the quotient ...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-008-9074-4
更新日期:2008-01-01 00:00:00
abstract::Transcutaneous immunization using a microneedle device presents a promising alternative to syringe-based injection of vaccines. The aim of this study was to investigate the effective immune response elicited after application of tetanus toxoid antigen-loaded dissolvable microneedles (TT-MN) in mice model. Dissolvable ...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-019-1471-3
更新日期:2019-07-22 00:00:00
abstract::Bottles and carboys are used for frozen storage and transport of biopharmaceutical formulations under a wide range of conditions. The quality of freezing and thawing in these systems has been questioned due to the formation of heterogeneous ice structures and deformation of containers. This work shows that during free...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-020-01794-x
更新日期:2020-09-01 00:00:00
abstract::This research aimed to synthesize and evaluate mucoadhesive catechol-functionalized alginate (Cat-Alg) nanoparticles (NPs) for bladder cancer. Cat-Alg was synthesized using coupling chemistry, and the structure was verified using NMR and FT-IR. Cat-Alg NPs were generated by ionic gelation between the synthesized Cat-A...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-020-01752-7
更新日期:2020-07-31 00:00:00
abstract::Ambient air humidity and temperature are known to influence the mechanical strength of tablets. The objective of this work is to understand the influence of processing parameters and environmental conditions (humidity and temperature) on the strength of bilayer tablets. As part of this study, bilayer tablets were comp...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-012-9846-8
更新日期:2012-12-01 00:00:00
abstract::The purpose of this research was to explore the utility of beta cyclodextrin (betaCD) and beta cyclodextrin derivatives (hydroxypropyl-beta-cyclodextrin [HPbetaCD], sulfobutylether-beta-CD [SBbetaCD], and a randomly methylated-beta-CD [RMbetaCD]) to form inclusion complexes with the antitumoral drug, beta-lapachone (b...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/pt0803060
更新日期:2007-07-27 00:00:00
abstract::The objective of this study was to design a time-controlled pulsatile release (TCPR) system containing propranolol (PNH) as an active pharmaceutical ingredient. Here, the developed dosage forms were coated with hydroxypropyl-methylcellulose (HPMC) and other excipients as barrier layer using dry-coated technology. The ...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-017-0746-9
更新日期:2017-10-01 00:00:00
abstract::The process of developing an old drug for new indications is now a widely accepted strategy of shortening drug development time, reducing drug costs, and improving drug availability, especially for rare and neglected diseases. In this mini-review, we highlighted the impact of drug delivery systems in the fulfillment o...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章,评审
doi:10.1208/s12249-019-1333-z
更新日期:2019-02-15 00:00:00
abstract::The aim of this work is to improve the understanding of the physicochemical mechanisms involved in the functionality of cross-linked carboxymethyl sodium starch (CCSS) as a tablet super disintegrant (SD). The behavior and properties of this SD (medium uptake, disintegration times, particle size, and rheology) was inve...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-014-0121-z
更新日期:2015-04-01 00:00:00
abstract::Nanoparticles fabricated from the biodegradable and biocompatible polymer, polylactic-co-glycolic acid (PLGA), could be a promising system for targeting ocular drug delivery. The objective of this work was to investigate the possibility of encapsulating brinzolamide in PLGA nanoparticles in order to be applied as a su...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-017-0710-8
更新日期:2017-10-01 00:00:00
abstract::Cationic liposomes have long been used as non-viral vectors for small interfering RNA (siRNA) delivery but are associated with high toxicity, less transfection efficiency, and in vivo instability. In this investigation, we have developed siRNA targeted to RRM1 that is responsible for development of resistance to gemci...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-014-0193-9
更新日期:2014-12-01 00:00:00
abstract::In our previously studies, we confirmed that ergosterol could ameliorate diabetic nephropathy by suppressing the proliferation of mesangial cells and the accumulation of extracellular matrix (ECM). However, the therapeutic application of ergosterol may be confined due to poor aqueous solubility and low oral bioavailab...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-019-1597-3
更新日期:2020-01-13 00:00:00
abstract::Modifications to the surface chemistry, charge, and hydrophilicity/hydrophobicity of nanoparticles are applicable approaches to the alterations of the in vivo fate of intravenously administered nano-sized drug carriers. The objective of this study is to investigate the in vitro and in vivo antitumor efficacies of curc...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-020-01698-w
更新日期:2020-06-11 00:00:00
abstract::Intra-periodontal pocket drug delivery systems, such as liquid crystalline systems, are widely utilized improving the drug release control and the therapy. Propolis is used in the treatment of periodontal diseases, reducing the inflammatory and infectious conditions. Iron oxide magnetic nanoparticles (MNPs) can improv...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-018-1163-4
更新日期:2018-10-01 00:00:00
abstract::The aim of this work was to study the effect of the type of substituent of the cellulose ethers and the molecular mass on the state and dynamics of water in the respective hydrogels to specify the quantity of adsorbed water on the polymers or, more explicitly, to calculate the average number of water molecules bound t...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/pt030436
更新日期:2002-01-01 00:00:00
abstract::The purpose of this research was to evaluate a new wireless and battery-free sensor technology for invasive product temperature measurement during freeze-drying. Product temperature is the most critical process parameter in a freeze-drying process, in particular during primary drying. The product temperature over time...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-008-9099-8
更新日期:2008-01-01 00:00:00