Experimental Aspects of Measuring the Vial Heat Transfer Coefficient in Pharmaceutical Freeze-Drying.

Abstract:

:One of the current methods for cycle optimization in primary drying to is develop a graphical design space based on quality by design (QbD). In order to construct the design space, the vial heat transfer coefficient (Kv) is needed. This paper investigated experimental factors that can affect the Kv result, examined the relationship between the batch average Kv and Kv values for individual vials, and recommended best practices for measuring Kv. Factors investigated included the technique for measuring ice temperature, shelf temperature, the use of a radiation shield on the door of the freeze-dry chamber, and shelf spacing. All experiments reported here used a chamber pressure of 100 mTorr. The most important factor was the technique for ice temperature measurement, where it is important to assure that any restrictions to vapor flow at the top of the vial are the same between monitored and non-monitored vials. Another factor that was found to play a role was the shelf temperature whereby the lower the shelf temperature, the larger the "edge effect," and the larger the average Kv. Factors that were found to not have a significant effect were the use of a radiation shield inside the chamber door and the shelf spacing. Being aware of these factors and knowing best practices when determining the vial heat coefficient will lead to more accurate design spaces and better cycle optimization.

journal_name

AAPS PharmSciTech

journal_title

AAPS PharmSciTech

authors

Wegiel LA,Ferris SJ,Nail SL

doi

10.1208/s12249-018-0998-z

subject

Has Abstract

pub_date

2018-05-01 00:00:00

pages

1810-1817

issue

4

issn

1530-9932

pii

10.1208/s12249-018-0998-z

journal_volume

19

pub_type

杂志文章
  • Biopharmaceutics classification system-based biowaivers for generic oncology drug products: case studies.

    abstract::Establishing bioequivalence (BE) of drugs indicated to treat cancer poses special challenges. For ethical reasons, often, the studies need to be conducted in cancer patients rather than in healthy volunteers, especially when the drug is cytotoxic. The Biopharmaceutics Classification System (BCS) introduced by Amidon (...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章,评审

    doi:10.1208/s12249-014-0195-7

    authors: Tampal N,Mandula H,Zhang H,Li BV,Nguyen H,Conner DP

    更新日期:2015-02-01 00:00:00

  • 3D-Printed Isoniazid Tablets for the Treatment and Prevention of Tuberculosis-Personalized Dosing and Drug Release.

    abstract::The aim of the present work was to produce 3D-printed oral dosage forms with a sufficient drug dose displaying various release profiles. Hot-melt extrusion was utilized to produce drug-loaded feedstock material that was subsequently 3D-printed into 6, 8, and 10 × 2.5 mm tablets with 15% and 90% infill levels. The prep...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-018-1233-7

    authors: Öblom H,Zhang J,Pimparade M,Speer I,Preis M,Repka M,Sandler N

    更新日期:2019-01-07 00:00:00

  • Pharmaceutical and pharmacokinetic evaluation of a novel fast dissolving film formulation of flupentixol dihydrochloride.

    abstract::The objective of the present study was to develop fast dissolving oral film of the antipsychotic drug, flupentixol dihydrochloride, to enhance its bioavailability, optimize its therapeutic effect when used to treat depression with anxiety, and increase the convenience and compliance by the mentally ill, developmentall...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章,随机对照试验

    doi:10.1208/s12249-014-0186-8

    authors: Abdelbary A,Bendas ER,Ramadan AA,Mostafa DA

    更新日期:2014-12-01 00:00:00

  • Design and optimization of mefloquine hydrochloride microparticles for bitter taste masking.

    abstract::The objective of the present investigation was to reduce the bitterness with improved dissolution, in acidic medium (pH 1.2), of mefloquine hydrochloride (MFL). Microparticles were prepared by coacervation method using Eudragit E (EE) as polymer and sodium hydroxide as precipitant. A 3(2) full factorial design was use...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-008-9052-x

    authors: Shah PP,Mashru RC,Rane YM,Thakkar A

    更新日期:2008-01-01 00:00:00

  • Polymorph transformation in paracetamol monitored by in-line NIR spectroscopy during a cooling crystallization process.

    abstract::The reliable in-line monitoring of pharmaceutical processes has been regarded as a key tool toward the full implementation of process analytical technology. In this study, near-infrared (NIR) spectroscopy was examined for use as an in-line monitoring method of the paracetamol cooling crystallization process. The drug ...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-011-9642-x

    authors: Wang IC,Lee MJ,Seo DY,Lee HE,Choi Y,Kim WS,Kim CS,Jeong MY,Choi GJ

    更新日期:2011-06-01 00:00:00

  • In vitro-controlled release delivery system for hydrogen sulfide donor.

    abstract::Hydrogen sulfide (H2S) is having many potential pharmacological and physiological actions which reported that therapeutically useful concentration is low (100-160 μM) and a higher concentration could be toxic. Most of its donors produce it on coming into contact with water. All of these problems could be solved by a c...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-014-0117-8

    authors: Ali H,Opere C,Singh S

    更新日期:2014-08-01 00:00:00

  • Polyethylene Oxide (PEO) Molecular Weight Effects on Abuse-Deterrent Properties of Matrix Tablets.

    abstract::While polyethylene oxide (PEO)-based matrix tablets are frequently used as abuse-deterrent dosage forms, there is limited information available regarding how the selection of formulation components and manufacturing processes affect the resulting abuse-deterrent properties. The objective of the current study was to ev...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-019-1565-y

    authors: Meruva S,Donovan MD

    更新日期:2019-12-19 00:00:00

  • Process optimization of a novel immediate release film coating system using QbD principles.

    abstract::This work describes a quality-by-design (QbD) approach to determine the optimal coating process conditions and robust process operating space for an immediate release aqueous film coating system (Opadry® 200). Critical quality attributes (CQAs) or associated performance indicators of the coated tablets were measured w...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-013-9935-3

    authors: Teckoe J,Mascaro T,Farrell TP,Rajabi-Siahboomi AR

    更新日期:2013-06-01 00:00:00

  • Nanocarrier-Based Combination Chemotherapy for Resistant Tumor: Development, Characterization, and Ex Vivo Cytotoxicity Assessment.

    abstract::A folic acid-conjugated paclitaxel (PTX)-doxorubicin (DOX)-loaded nanostructured lipid carrier(s) (FA-PTX-DOX NLCs) were prepared by using emulsion-evaporation method and extensively characterized for particle size, polydispersity index, zeta potential, and % entrapment efficiency which were found to be 196 ± 2.5 nm, ...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-018-1185-y

    authors: Raikwar S,Vyas S,Sharma R,Mody N,Dubey S,Vyas SP

    更新日期:2018-11-01 00:00:00

  • Antiproliferative Activity and VEGF Expression Reduction in MCF7 and PC-3 Cancer Cells by Paclitaxel and Imatinib Co-encapsulation in Folate-Targeted Liposomes.

    abstract::Co-encapsulation of anticancer drugs paclitaxel and imatinib in nanocarriers is a promising strategy to optimize cancer treatment. Aiming to combine the cytotoxic and antiangiogenic properties of the drugs, a liposome formulation targeted to folate receptor co-encapsulating paclitaxel and imatinib was designed in this...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-017-0830-1

    authors: Peres-Filho MJ,Dos Santos AP,Nascimento TL,de Ávila RI,Ferreira FS,Valadares MC,Lima EM

    更新日期:2018-01-01 00:00:00

  • Intraoral film containing insulin-phospholipid microemulsion: formulation and in vivo hypoglycemic activity study.

    abstract::Non-invasive administration of insulin is expected for better diabetes mellitus therapy. In this report, we developed intraoral preparation for insulin. Insulin was encapsulated into nanocarrier using self-assembly emulsification process. To increase lipophilicity of insulin, it was dispersed in phospholipid resulted ...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-014-0258-9

    authors: Rachmawati H,Haryadi BM,Anggadiredja K,Suendo V

    更新日期:2015-06-01 00:00:00

  • Studies on transdermal delivery enhancement of zidovudine.

    abstract::The purpose of this study was to investigate physicochemical characteristics and in vitro release of zidovudine from monolithic film of Eudragit RL 100 and ethyl cellulose. Films included 2.5% or 5% (w/w) zidovudine of the dry polymer weight were prepared in various ratios of polymers by solvent evaporation method fro...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-008-9179-9

    authors: Takmaz EA,Inal O,Baykara T

    更新日期:2009-01-01 00:00:00

  • Improved Oral Pharmacokinetics of Pentoxifylline with Palm Oil and Capmul® MCM Containing Self-Nano-Emulsifying Drug Delivery System.

    abstract::Pentoxifylline (PTX), an anti-hemorrhage drug used in the treatment of intermittent claudication, is extensively metabolized by the liver resulting in a reduction of the therapeutic levels within a short duration of time. Self-nano-emulsifying drug delivery system (SNEDDS) is well reported to enhance the bio-absorptio...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-020-01644-w

    authors: Shailendrakumar AM,Ghate VM,Kinra M,Lewis SA

    更新日期:2020-04-21 00:00:00

  • Biodegradation and in vivo biocompatibility of rosin: a natural film-forming polymer.

    abstract::The specific aim of the present study was to investigate the biodegradation and biocompatibility characteristics of rosin, a natural film-forming polymer. Both in vitro as well as in vivo methods were used for assessment of the same. The in vitro degradation of rosin films was followed in pH 7.4 phosphate buffered sal...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/pt040455

    authors: Satturwar PM,Fulzele SV,Dorle AK

    更新日期:2003-10-22 00:00:00

  • Formulation Optimization of Selective Laser Sintering 3D-Printed Tablets of Clindamycin Palmitate Hydrochloride by Response Surface Methodology.

    abstract::The aims of the current study were to develop and evaluate clindamycin palmitate hydrochloride (CPH) 3D-printed tablets (printlets) manufactured by selective laser sintering (SLS). Optimization of the formulation was performed by studying the effect of formulation and process factors on critical quality attributes of ...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-020-01775-0

    authors: Mohamed EM,Barakh Ali SF,Rahman Z,Dharani S,Ozkan T,Kuttolamadom MA,Khan MA

    更新日期:2020-08-13 00:00:00

  • Kinetics of pramlintide degradation in aqueous solution as a function of temperature and pH.

    abstract::The stability of the 37-amino acid peptide pramlintide, in aqueous solution, was studied as a function of pH and temperature. Samples of pramlintide formulated as a parenteral product were exposed to elevated temperatures and to realistic storage conditions for as long as 30 months. Pramlintide degradation was monitor...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/pt010207

    authors: Kenley RA,Tracht S,Stepanenko A,Townsend M,L'Italien J

    更新日期:2000-03-18 00:00:00

  • A mucoadhesive in situ gel delivery system for paclitaxel.

    abstract::MUC1 gene encodes a transmembrane mucin glycoprotein that is overexpressed in human breast cancer and colon cancer. The objective of this study was to develop an in situ gel delivery system containing paclitaxel (PTX) and mucoadhesives for sustained and targeted delivery of anticancer drugs. The delivery system consis...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/pt070253

    authors: Jauhari S,Dash AK

    更新日期:2006-06-02 00:00:00

  • Enhancing and sustaining AMG 009 dissolution from a matrix tablet via microenvironmental pH modulation and supersaturation.

    abstract::The objective of this study was to investigate the combined effect of pH modifiers and nucleation inhibitors on enhancing and sustaining the dissolution of AMG 009 tablet via supersaturation. Several bases and polymers were added as pH modifiers and nucleation inhibitors, respectively, to evaluate their impact on the ...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-011-9679-x

    authors: Bi M,Kyad A,Kiang YH,Alvarez-Nunez F,Alvarez F

    更新日期:2011-12-01 00:00:00

  • Assessment Methodology for Process Validation Lifecycle Stage 3A.

    abstract::The paper introduces evaluation methodologies and associated statistical approaches for process validation lifecycle Stage 3A. The assessment tools proposed can be applied to newly developed and launched small molecule as well as bio-pharma products, where substantial process and product knowledge has been gathered. T...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章,评审

    doi:10.1208/s12249-016-0641-9

    authors: Sayeed-Desta N,Pazhayattil AB,Collins J,Chen S,Ingram M,Spes J

    更新日期:2017-07-01 00:00:00

  • Formulation and In Vitro and In Vivo Evaluation of Lipid-Based Terbutaline Sulphate Bi-layer Tablets for Once-Daily Administration.

    abstract::The objective of this study was to prepare and evaluate terbutaline sulphate (TBS) bi-layer tablets for once-daily administration. The bi-layer tablets consisted of an immediate-release layer and a sustained-release layer containing 5 and 10 mg TBS, respectively. The sustained-release layer was developed by using Comp...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-015-0404-z

    authors: Hashem FM,Nasr M,Fathy G,Ismail A

    更新日期:2016-06-01 00:00:00

  • A new approach for increasing ascorbyl palmitate stability by addition of non-irritant co-antioxidant.

    abstract::The aim of this work was to test innovative approach for enhancing ascorbyl palmitate stability in microemulsions for topical application by addition of newly synthesized co-antioxidant 4-(tridecyloxy)benzaldehyde oxime (TDBO) and to investigate its antioxidant activity and finally to evaluate cytotoxicity of TDBO-loa...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-010-9507-8

    authors: Gosenca M,Obreza A,Pečar S,Gašperlin M

    更新日期:2010-09-01 00:00:00

  • Investigation of the state and dynamics of water in hydrogels of cellulose ethers by 1H NMR spectroscopy.

    abstract::The aim of this work was to study the effect of the type of substituent of the cellulose ethers and the molecular mass on the state and dynamics of water in the respective hydrogels to specify the quantity of adsorbed water on the polymers or, more explicitly, to calculate the average number of water molecules bound t...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/pt030436

    authors: Baumgartner S,Lahajnar G,Sepe A,Kristl J

    更新日期:2002-01-01 00:00:00

  • In vitro dissolution of generic immediate-release solid oral dosage forms containing BCS class I drugs: comparative assessment of metronidazole, zidovudine, and amoxicillin versus relevant comparator pharmaceutical products in South Africa and India.

    abstract::Biowaivers are recommended for immediate-release solid oral dosage forms using dissolution testing as a surrogate for in vivo bioequivalence studies. Several guidance are currently available (the World Health Organization (WHO), the US FDA, and the EMEA) where the conditions are described. In this study, definitions, ...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-014-0135-6

    authors: Reddy NH,Patnala S,Löbenberg R,Kanfer I

    更新日期:2014-10-01 00:00:00

  • Simultaneous Evaluation of Dissolution and Permeation of Oral Drug Solid Formulations for Predicting Absorption Rate-Limiting Factors and In Vitro-In Vivo Correlations: Case Study Using a Poorly Soluble Weakly Basic Drug.

    abstract::Combined dissolution and permeation systems are designed to simultaneously assess the dissolution of a pharmaceutical dosage form and the permeation of dissolved drugs therefrom. However, there were still some limitations on predicting the possible absorption rate-limiting steps and improving the in vitro-in vivo corr...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-019-1544-3

    authors: Li Z,He X,Tian S,Feng G,Huang C,Xun M,Wu Z,Wang Y

    更新日期:2019-10-24 00:00:00

  • Preparation and In Vitro-In Vivo Evaluation of Sustained-Release Matrix Pellets of Capsaicin to Enhance the Oral Bioavailability.

    abstract::Capsaicin has multiple pharmacological activities including antioxidant, anticancer, and anti-inflammatory activities. However, its clinical application is limited due to its poor aqueous solubility, gastric irritation, and low oral bioavailability. This research was aimed at preparing sustained-release matrix pellets...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-015-0352-7

    authors: Zhang Y,Huang Z,Omari-Siaw E,Lu S,Zhu Y,Jiang D,Wang M,Yu J,Xu X,Zhang W

    更新日期:2016-04-01 00:00:00

  • Effect of oppositely charged polymer and dissolution media on rheology of spray-dried ionic complexes.

    abstract::The purpose of this research was to address the utility of rheological study in understanding the influence of oppositely charged polymers on release of naproxen sodium encapsulated in chitosan particles. The interaction between oppositely charged kappa-carrageenan (kappa-Ca) and chitosan leads to relatively higher ge...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-010-9379-y

    authors: Bhise KS,Dhumal RS,Shailesh B,Paradkar AR,Kadam SS

    更新日期:2010-03-01 00:00:00

  • Development of Orodispersible Films Containing Benzydamine Hydrochloride Using a Modified Solvent Casting Method.

    abstract::The aim of this study was to develop benzydamine hydrochloride-loaded orodispersible films using the modification of a solvent casting method. An innovative approach was developed when the drying process of a small-scale production was used based on a heated inert base for casting the film. During this process, two ty...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-018-1088-y

    authors: Pechová V,Gajdziok J,Muselík J,Vetchý D

    更新日期:2018-08-01 00:00:00

  • A novel nanoparticle formulation for sustained paclitaxel delivery.

    abstract:PURPOSE:To develop a novel nanoparticle drug delivery system consisting of chitosan and glyceryl monooleate (GMO) for the delivery of a wide variety of therapeutics including paclitaxel. METHODS:Chitosan/GMO nanoparticles were prepared by multiple emulsion (o/w/o) solvent evaporation methods. Particle size and surface...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-008-9063-7

    authors: Trickler WJ,Nagvekar AA,Dash AK

    更新日期:2008-01-01 00:00:00

  • Effect of Different Nail Penetration Enhancers in Solid Lipid Nanoparticles Containing Terbinafine Hydrochloride for Treatment of Onychomycosis.

    abstract::Onychomycosis is considered a stubborn nail fungal infection that does not respond to conventional topical antifungal treatments. This study aimed to develop and characterize novel solid lipid nanoparticles (SLNs) formulae containing terbinafine HCl (TFH) and loaded with different nail penetration enhancers (nPEs). Th...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-020-01893-9

    authors: Abobakr FE,Fayez SM,Elwazzan VS,Sakran W

    更新日期:2021-01-06 00:00:00

  • Design and Development of Lidocaine Microemulsions for Transdermal Delivery.

    abstract::Topical administration is a preferable choice for local anesthetic delivery. Microemulsions have shown great effectiveness for transdermal transport of lidocaine. However, fabrication of microemulsions containing highly concentrated lidocaine (10%) to provide an extended local anesthetic effect is still a challenge. T...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-018-1263-1

    authors: Wang Y,Wang X,Wang X,Song Y,Wang X,Hao J

    更新日期:2019-01-09 00:00:00