Formulation and stability testing of itraconazole crystalline nanoparticles.

abstract：:For the prediction of the air and product temperatures, the product moisture, and the air humidity during a coating process in a Bohle Lab-Coater, a model was developed. The purpose of this work was to determine the limit moisture, the critical moisture, and the constant for the exchange rate between both zones and to...

journal_title：AAPS PharmSciTech

authors： Page S,Baumann KH,Kleinebudde P

更新日期：2006-05-05 00:00:00

abstract：:The recommended method for the biopharmaceutical evaluation of drug solubility is the shake flask; however, there are discrepancies reported about the solubility of certain compounds measured with this method, one of them is candesartan cilexetil. The present work aimed to elucidate the solubility of candesartan cilex...

journal_title：AAPS PharmSciTech

authors： de Campos DP,Silva-Barcellos NM,Lima RR,Savedra RML,Siqueira MF,Yoshida MI,da Nova Mussel W,de Souza J

更新日期：2018-10-01 00:00:00

abstract：:Hydrogen sulfide (H2S) is having many potential pharmacological and physiological actions which reported that therapeutically useful concentration is low (100-160 μM) and a higher concentration could be toxic. Most of its donors produce it on coming into contact with water. All of these problems could be solved by a c...

journal_title：AAPS PharmSciTech

authors： Ali H,Opere C,Singh S

更新日期：2014-08-01 00:00:00

abstract：:The approach documented in this article reviews data from earlier process validation lifecycle stages with a described statistical model to provide the "best estimate" on the number of process performance qualification (PPQ) batches that should generate sufficient information to make a scientific and risk-based decisi...

journal_title：AAPS PharmSciTech

authors： Pazhayattil A,Alsmeyer D,Chen S,Hye M,Ingram M,Sanghvi P

更新日期：2016-08-01 00:00:00

abstract：:The objective of the present study is to investigate the effect of hydrocarbon chain length in 1,2-alkanediols on percutaneous absorption of metronidazole (MTZ). Twelve formulations (1,2-propanediol, 1,2-butanediol, 1,2-pentanediol, 1,2-hexanediol in 4% concentration, 1,2-hexanediol, and 1,2-heptanediol in 1% concentr...

journal_title：AAPS PharmSciTech

authors： Li N,Jia W,Zhang Y,Zhang MC,Tan F,Zhang J

更新日期：2014-04-01 00:00:00

abstract：:Drying is one of the standard unit operations in the pharmaceutical industry and it is important to become aware of the circumstances that dominate during the process. The purpose of this study was to test microcapsulated thermochromic pigments as heat indicators in a fluid bed drying process. The indicator powders we...

journal_title：AAPS PharmSciTech

authors： Lakio S,Heinämäki J,Yliruusi J

更新日期：2010-03-01 00:00:00

abstract：:The use of amorphous solid dispersions to improve the bioavailability of active ingredients from the BCS II and IV classifications continues to gain interest in the pharmaceutical industry. Over the last decade, methods for generating amorphous solid dispersions have been well established in commercially available pro...

journal_title：AAPS PharmSciTech

authors： Huang S,Williams RO 3rd

更新日期：2018-07-01 00:00:00

abstract：:The purpose of this research was to develop mouth dissolve tablets of nimesulide. Granules containing nimesulide, camphor, crospovidone, and lactose were prepared by wet granulation technique. Camphor was sublimed from the dried granules by exposure to vacuum. The porous granules were then compressed. Alternatively, t...

journal_title：AAPS PharmSciTech

authors： Gohel M,Patel M,Amin A,Agrawal R,Dave R,Bariya N

更新日期：2004-04-26 00:00:00

abstract：:The objective of the study was to investigate in vitro transdermal delivery of venlafaxine hydrochloride across the pigskin by passive diffusion and iontophoresis. For passive diffusion, experiments were carried out in Franz diffusion cell whereas for iontophoretic permeation, the diffusion cell was modified to contai...

journal_title：AAPS PharmSciTech

authors： Singh G,Ghosh B,Kaushalkumar D,Somsekhar V

更新日期：2008-01-01 00:00:00

abstract：:The aim of the present work was to produce 3D-printed oral dosage forms with a sufficient drug dose displaying various release profiles. Hot-melt extrusion was utilized to produce drug-loaded feedstock material that was subsequently 3D-printed into 6, 8, and 10 × 2.5 mm tablets with 15% and 90% infill levels. The prep...

journal_title：AAPS PharmSciTech

authors： Öblom H,Zhang J,Pimparade M,Speer I,Preis M,Repka M,Sandler N

更新日期：2019-01-07 00:00:00

abstract：:Poly(vinyl alcohol) (PVA)-based formulations are used for pharmaceutical tablet coating with numerous advantages. Our objective is to study the stability of PVA-based coating films in the presence of acidic additives, alkaline additives, and various common impurities typically found in tablet formulations. Opadry® II ...

journal_title：AAPS PharmSciTech

authors： Koo OM,Fiske JD,Yang H,Nikfar F,Thakur A,Scheer B,Adams ML

更新日期：2011-06-01 00:00:00

abstract：:The physicochemical properties of the optimized microemulsion and the permeating ability of oxyresveratrol in microemulsion were evaluated, and the efficacy of oxyresveratrol microemulsion in cutaneous herpes simplex virus type 1 (HSV-1) infection in mice was examined. The optimized microemulsion was composed of 10% w...

journal_title：AAPS PharmSciTech

authors： Sasivimolphan P,Lipipun V,Ritthidej G,Chitphet K,Yoshida Y,Daikoku T,Sritularak B,Likhitwitayawuid K,Pramyothin P,Hattori M,Shiraki K

更新日期：2012-12-01 00:00:00

abstract：:The purpose of the current study was to mask the taste of cetirizine HCl and to incorporate the granules produced in oral disintegrating tablets (ODT). The bitter, active substance was coated by fluidized bed coating using Eudragit® RL30-D at levels between 15% and 40% w/w. The ODTs were developed by varying the ratio...

journal_title：AAPS PharmSciTech

authors： Douroumis DD,Gryczke A,Schminke S

更新日期：2011-03-01 00:00:00

abstract：:While the concept of using polymer-based sustained-release delivery systems to maintain therapeutic concentration of protein drugs for extended periods of time has been well accepted for decades, there has not been a single product in this category successfully commercialized to date despite clinical and market demand...

journal_title：AAPS PharmSciTech

authors： Wu F,Jin T

更新日期：2008-01-01 00:00:00

abstract：:In community settings, IM injection of 0.3 mg epinephrine (Epi) using an auto-injector is the drug of choice for treatment of anaphylaxis. Previously, a taste-masking (TM) formulation of fast-disintegrating sublingual tablets (FDSTs) was developed in our lab. Also, Epi was micronized (Epi-MC) successfully and reduced ...

journal_title：AAPS PharmSciTech

authors： Rachid O,Simons KJ,Rawas-Qalaji M

更新日期：2018-11-01 00:00:00

abstract：:While polyethylene oxide (PEO)-based matrix tablets are frequently used as abuse-deterrent dosage forms, there is limited information available regarding how the selection of formulation components and manufacturing processes affect the resulting abuse-deterrent properties. The objective of the current study was to ev...

journal_title：AAPS PharmSciTech

authors： Meruva S,Donovan MD

更新日期：2019-12-19 00:00:00

abstract：:Polymeric films are safe and effective and can be used for vaginal administration of microbicide drug candidates. Dapivirine (DPV), an investigational and clinically advanced antiretroviral drug, was selected as a model compound for this study. We have previously developed and clinically tested a quick-dissolving DPV ...

journal_title：AAPS PharmSciTech

authors： Regev G,Patel SK,Moncla BJ,Twist J,Devlin B,Rohan LC

更新日期：2019-06-26 00:00:00

abstract：:This study examined the effect of rotor speed, amount of water sprayed, and atomizing air pressure on the geometric mean diameter and geometric standard deviation of pellets produced in a fluid-bed rotor granulator using a 23 factorial design and an optimization technique. Pellets were prepared by wet granulation. Equ...

journal_title：AAPS PharmSciTech

authors： Korakianiti ES,Rekkas DM,Dallas PP,Choulis NH

更新日期：2000-12-01 00:00:00

abstract：:In order to obtain sustained release of biodegradable microspheres, the purpose of this study was to design and characterize an injectable octreotide microsphere-gel composite system. The octreotide microspheres were prepared by phase separation method, which used PLGA as a carrier material, dimethyl silicone oil as a...

journal_title：AAPS PharmSciTech

authors： Wang T,Zhang C,Zhong W,Yang X,Wang A,Liang R

更新日期：2019-06-21 00:00:00

abstract：:Posaconazole is a triazole antifungal drug that with extremely poor aqueous solubility. Up to now, this drug can be administered via intravenous injection and oral suspension. However, its oral bioavailability is greatly limited by the dissolution rate of the drug. This study aimed to improve water solubility and diss...

journal_title：AAPS PharmSciTech

authors： Tang P,Wang L,Ma X,Xu K,Xiong X,Liao X,Li H

更新日期：2017-01-01 00:00:00

abstract：:The interactions with and effects of five chemically distinct, bioactive phenolic compounds on the lipid bilayers of model dipalmitoylphosphatidylcholine (DPPC) liposomes were investigated. Complementary analytical techniques, including differential scanning calorimetry (DSC) and phosphorus and proton nuclear magnetic...

journal_title：AAPS PharmSciTech

authors： Malekar SA,Sarode AL,Bach AC 2nd,Worthen DR

更新日期：2016-12-01 00:00:00

abstract：:Pentoxifylline (PTX), an anti-hemorrhage drug used in the treatment of intermittent claudication, is extensively metabolized by the liver resulting in a reduction of the therapeutic levels within a short duration of time. Self-nano-emulsifying drug delivery system (SNEDDS) is well reported to enhance the bio-absorptio...

journal_title：AAPS PharmSciTech

authors： Shailendrakumar AM,Ghate VM,Kinra M,Lewis SA

更新日期：2020-04-21 00:00:00

abstract：:Chemical penetration enhancers are widely used in transdermal drug delivery system. However, few studies have focused on changes of concentration in chemical penetration enhancers. In this study, the effect of concentrations of enhancers on drug release and its mechanism were investigated. Zolmitriptan (ZOL) was used ...

journal_title：AAPS PharmSciTech

authors： Ruan J,Wan X,Quan P,Liu C,Fang L

更新日期：2019-04-25 00:00:00

abstract：:The aim of this study was to investigate the influence of experimental conditions on levothyroxine sodium release from two immediate-release tablet formulations which narrowly passed the standard requirements for bioequivalence studies. The in vivo study was conducted as randomised, single-dose, two-way cross-over pha...

journal_title：AAPS PharmSciTech

authors： Kocic I,Homsek I,Dacevic M,Parojcic J,Miljkovic B

更新日期：2011-09-01 00:00:00

abstract：:A melt solidification technique has been developed to obtain sustained-release waxy beads of flurbiprofen. Low glass transition temperature (t(g)) and shear-induced crystallization of flurbiprofen made it a suitable candidate for melt solidification technique. The process involved emulsification and solidification of ...

journal_title：AAPS PharmSciTech

authors： Paradkar A,Maheshwari M,Tyagi AK,Chauhan B,Kadam SS

更新日期：2003-12-16 00:00:00

abstract：:The scale up of production processes is a major challenge in pharmaceutical industry. Using a quality by design approach, upscaling can be based on the design space, which can be assessed on a small scale. In a previous study, the critical process parameters were identified by a definitive screening design on cetomacr...

journal_title：AAPS PharmSciTech

authors： van Heugten AJP,Vromans H

更新日期：2018-07-01 00:00:00

abstract：:The purpose of this study was to develop formulations and systematically evaluate in vitro performances of buccoadhesive patches of propranolol hydrochloride using the hydrophobic polymer Eudragit L-100 as the base matrix. The hydrophilic polymers Carbopol 934 and polyvinyl pyrrolidone (PVP) K30 were incorporated into...

journal_title：AAPS PharmSciTech

authors： Patel VM,Prajapati BG,Patel MM

更新日期：2007-06-22 00:00:00

abstract：:The aim of this study was to apply quality by design (QbD) for pharmaceutical development of felodipine solid mixture (FSM) containing hydrophilic carriers and/or polymeric surfactants, for easier development of controlled-release tablets of felodipine. The material attributes, the process parameters (CPP), and the cr...

journal_title：AAPS PharmSciTech

authors： Basalious EB,El-Sebaie W,El-Gazayerly O

更新日期：2011-09-01 00:00:00

abstract：:The paper introduces evaluation methodologies and associated statistical approaches for process validation lifecycle Stage 3A. The assessment tools proposed can be applied to newly developed and launched small molecule as well as bio-pharma products, where substantial process and product knowledge has been gathered. T...

journal_title：AAPS PharmSciTech

authors： Sayeed-Desta N,Pazhayattil AB,Collins J,Chen S,Ingram M,Spes J

更新日期：2017-07-01 00:00:00

abstract：:Onychomycosis is a chronic disorder that is difficult to manage and hard to eradicate with perilous trends to relapse. Due to increased prevalence of HIV, use of immunosuppressant drugs and lifestyle-related factors, population affected with fungal infection of nail (Onychomycosis) happens to increase extensively in l...

journal_title：AAPS PharmSciTech

authors： Vikas A,Rashmin P,Mrunali P,Chavan RB,Kaushik T

更新日期：2020-01-14 00:00:00