Abstract：
:Lipid nanoparticles based on solid matrix have emerged as potential drug carriers to improve gastrointestinal (GI) absorption and oral bioavailability of several drugs, especially lipophilic compounds. These formulations may also be used for sustained drug release. Solid lipid nanoparticle (SLN) and the newer generation lipid nanoparticle, nanostructured lipid carrier (NLC), have been studied for their capability as oral drug carriers. Biodegradable, biocompatible, and physiological lipids are generally used to prepare these nanoparticles. Hence, toxicity problems related with the polymeric nanoparticles can be minimized. Furthermore, stability of the formulations might increase than other liquid nano-carriers due to the solid matrix of these lipid nanoparticles. These nanoparticles can be produced by different formulation techniques. Scaling up of the production process from lab scale to industrial scale can be easily achieved. Reasonably high drug encapsulation efficiency of the nanoparticles was documented. Oral absorption and bioavailability of several drugs were improved after oral administration of the drug-loaded SLNs or NLCs. In this review, pros and cons, different formulation and characterization techniques, drug incorporation models, GI absorption and oral bioavailability enhancement mechanisms, stability and storage condition of the formulations, and recent advances in oral delivery of the lipid nanoparticles based on solid matrix will be discussed.
journal_name
AAPS PharmSciTechjournal_title
AAPS PharmSciTechauthors
Das S,Chaudhury Adoi
10.1208/s12249-010-9563-0subject
Has Abstractpub_date
2011-03-01 00:00:00pages
62-76issue
1issn
1530-9932journal_volume
12pub_type
杂志文章,评审abstract：:Effectiveness of CNS-acting drugs depends on the localization, targeting, and capacity to be transported through the blood-brain barrier (BBB) which can be achieved by designing brain-targeting delivery vectors. Hence, the objective of this study was to screen the formulation and process variables affecting the perfor...
journal_title：AAPS PharmSciTech
pub_type： 杂志文章
doi：10.1208/s12249-016-0481-7
更新日期：2016-12-01 00:00:00
abstract：:The addition of polysorbate 20 (T20) is required to achieve "sink" conditions during a dissolution test for tablets with candesartan cilexetil (CC). Polysorbate 20 (0.35%-0.7% w/w) added to 0.05 mol/L of phosphate buffer pH 6.5 dramatically increased the apparent solubility of the drug from 0.8 μg/ml even to 353 μg/ml...
journal_title：AAPS PharmSciTech
pub_type： 杂志文章
doi：10.1208/s12249-014-0109-8
更新日期：2014-10-01 00:00:00
abstract：:The purpose of this work was to measure viscosity of fluids at low microliter volumes by means of quartz crystal impedance analysis. To achieve this, a novel setup was designed that allowed for measurement of viscosity at volumes of 8 to 10 microL. The technique was based on the principle of electromechanical coupling...
journal_title：AAPS PharmSciTech
pub_type： 杂志文章
doi：10.1208/pt050347
更新日期：2004-08-05 00:00:00
abstract：:A feasibility evaluation of the addition of fumed silica (SiO2) into an agitated dryer to aid spray-dried solid dispersion intermediate (SDSDi) flow during secondary drying and discharge is described. The quantity of SiO2 to enhance the flow character of SDSDi was assessed by measuring particle size distribution, bulk...
journal_title：AAPS PharmSciTech
pub_type： 杂志文章
doi：10.1208/s12249-019-1392-1
更新日期：2019-05-03 00:00:00
abstract：:Hypertension remains a significant risk factor for several cardiovascular disorders including coronary artery disease and heart failure. Despite the large armamentarium of drugs available for the management of high blood pressure, low oral availability is an ongoing challenge. Researchers are constantly developing alt...
journal_title：AAPS PharmSciTech
pub_type： 杂志文章,评审
doi：10.1208/s12249-019-1583-9
更新日期：2020-01-06 00:00:00
abstract：:The purpose of this study was to investigate physicochemical characteristics and in vitro release of zidovudine from monolithic film of Eudragit RL 100 and ethyl cellulose. Films included 2.5% or 5% (w/w) zidovudine of the dry polymer weight were prepared in various ratios of polymers by solvent evaporation method fro...
journal_title：AAPS PharmSciTech
pub_type： 杂志文章
doi：10.1208/s12249-008-9179-9
更新日期：2009-01-01 00:00:00
abstract：:The objective of this study was to prepare and evaluate terbutaline sulphate (TBS) bi-layer tablets for once-daily administration. The bi-layer tablets consisted of an immediate-release layer and a sustained-release layer containing 5 and 10 mg TBS, respectively. The sustained-release layer was developed by using Comp...
journal_title：AAPS PharmSciTech
pub_type： 杂志文章
doi：10.1208/s12249-015-0404-z
更新日期：2016-06-01 00:00:00
abstract：:Direct pulmonary delivery is a promising step in developing effective gene therapies for respiratory disease. Gene therapies can be used to treat the root cause of diseases, rather than just the symptoms. However, developing effective therapies that do not cause toxicity and that successfully reach the target site at ...
journal_title：AAPS PharmSciTech
pub_type： 杂志文章
doi：10.1208/s12249-018-1215-9
更新日期：2019-01-02 00:00:00
abstract：:An acid-buffering bioadhesive vaginal tablet was developed for the treatment of genitourinary tract infections. From the bioadhesion experiment and release studies it was found that polycarbophil and sodium carboxymethylcellulose is a good combination for an acid-buffering bioadhesive vaginal tablet. Sodium monocitrat...
journal_title：AAPS PharmSciTech
pub_type： 杂志文章
doi：10.1208/pt0804109
更新日期：2007-12-14 00:00:00
abstract：:A number of synthesized chemical molecules suffer from low aqueous solubility problems. Enhancement of aqueous solubility, dissolution rate, and bioavailability of drug is a very challenging task in drug development. In the present study, solubility and dissolution of poorly aqueous soluble drug simvastatin (SIM) was ...
journal_title：AAPS PharmSciTech
pub_type： 杂志文章
doi：10.1208/s12249-008-9176-z
更新日期：2008-01-01 00:00:00
abstract：:This work aimed to develop a fast-dissolving film made of low dextrose equivalent maltodextrins (MDX) containing nicotine hydrogen tartrate salt (NHT). Particular attention was given to the selection of the suitable taste-masking agent (TMA) and the characterisation of the ductility and flexibility under different mec...
journal_title：AAPS PharmSciTech
pub_type： 杂志文章
doi：10.1208/s12249-010-9525-6
更新日期：2010-12-01 00:00:00
abstract：:Niacin (nicotinic acid, NA) is administered orally as an antihyperlipidemic agent in extended-release (ER) tablets in high doses. Due to rapid absorption and extensive metabolism (non-linear pharmacokinetics), the drug plasma levels are highly variable, which may correlate with side effects. Interestingly, this errati...
journal_title：AAPS PharmSciTech
pub_type： 杂志文章
doi：10.1208/s12249-019-1600-z
更新日期：2020-01-27 00:00:00
abstract：:Chemical penetration enhancers are widely used in transdermal drug delivery system. However, few studies have focused on changes of concentration in chemical penetration enhancers. In this study, the effect of concentrations of enhancers on drug release and its mechanism were investigated. Zolmitriptan (ZOL) was used ...
journal_title：AAPS PharmSciTech
pub_type： 杂志文章
doi：10.1208/s12249-019-1370-7
更新日期：2019-04-25 00:00:00
abstract：:The potential value of succinylated soy protein (SPS) as a wall material for the encapsulation of ibuprofen (IBU), a model hydrophobic drug, by spray-drying was investigated. A succinylation rate of 93% was obtained for soy protein isolate, with a molar ratio of 1/1.5 (NH2/succinic anhydride). The solubility profile a...
journal_title：AAPS PharmSciTech
pub_type： 杂志文章
doi：10.1208/s12249-018-1250-6
更新日期：2019-01-11 00:00:00
abstract：:As a synthetic clay material, laponite RDS (LR) was investigated as an effective drug carrier as a result of the special nanodisk structure together with the negative-charged surface to achieve enhanced cellular uptake and targeted delivery. In this research work, the synthesized oligomeric hyaluronic acid-aminophenyl...
journal_title：AAPS PharmSciTech
pub_type： 杂志文章
doi：10.1208/s12249-019-1533-6
更新日期：2019-11-20 00:00:00
abstract：:The purpose of this research was to evaluate in vitro transnasal sustained-release ability of sorbitan monostearate (SMS) organogels in isopropyl myristate (IM). Organogels were prepared containing SMS (2.5%-20%) and water (5%-25%) in IM and analyzed microscopically for phase behavior. The effect of Tween surfactants ...
journal_title：AAPS PharmSciTech
pub_type： 杂志文章
doi：10.1208/pt050463
更新日期：2004-09-13 00:00:00
abstract：:Successful pellet production has been reported in literature with cross-linked poly(vinylpyrrolidone), Polyplasdone® XL-10 and INF-10. In the present study, a quality by experimental design approach was used to assess several formulation and process parameter effects on the characteristics of Polyplasdone® XL-10 pelle...
journal_title：AAPS PharmSciTech
pub_type： 杂志文章
doi：10.1208/s12249-015-0345-6
更新日期：2016-04-01 00:00:00
abstract：:Phase transformations in formulations can lead to instability in physicochemical, biopharmaceutical, and processing properties of products. The influences of formulation design on the optimal dosage forms should be specified. The aim here was to investigate whether excipients with different water sorption behavior aff...
journal_title：AAPS PharmSciTech
pub_type： 杂志文章
doi：10.1208/pt060241
更新日期：2005-10-06 00:00:00
abstract：:Bilayer nicotine mucoadhesive patches were prepared and evaluated to determine the feasibility of the formulation as a nicotine replacement product to aid in smoking cessation. Nicotine patches were prepared using xanthan gum or carbopol 934 as a mucoadhesive polymers and ethyl cellulose as a backing layer. The patche...
journal_title：AAPS PharmSciTech
pub_type： 杂志文章
doi：10.1208/s12249-010-9534-5
更新日期：2011-03-01 00:00:00
abstract：:Droplet velocity is an important parameter that can be used to characterize nasal spray products. In this study, a phase-Doppler anemometry (PDA) system was used to measure the droplet velocities of nasal sprays. A survey of seven commercial nasal spray products showed a range of droplet velocities from 6.7 to 19.2 m/...
journal_title：AAPS PharmSciTech
pub_type： 杂志文章
doi：10.1208/s12249-011-9594-1
更新日期：2011-03-01 00:00:00
abstract：:We have designed a microemulsion (ME) containing Ketoprofen (KET) for anti-inflammatory effect evaluated using the rat paw edema model. The ME was prepared by adding propylene glycol (PG) loaded with 1% KET/water (3:1, w/w), to a mixture of sorbitan monooleate and polysorbate 80 (47.0%) at 3:1 (w/w) and canola oil (38...
journal_title：AAPS PharmSciTech
pub_type： 杂志文章
doi：10.1208/s12249-017-0749-6
更新日期：2017-10-01 00:00:00
abstract：:Pellet manufacturing by extrusion/spheronization is quite common in the pharmaceutical field because the obtained product is characterized by a high sphericity as well as a narrow particle size distribution. The established mechanisms only consider deformation of the initially fractured particles but do not account fo...
journal_title：AAPS PharmSciTech
pub_type： 杂志文章
doi：10.1208/s12249-010-9532-7
更新日期：2010-12-01 00:00:00
abstract：:The current investigation aimed at formulating self-microemulsifying drug delivery system (SMEDDS) to ameliorate oral bioavailability of a hydrophobic functional ingredient, limonene. Solubility test, compatibility test, and pseudo-ternary phase diagrams (PTPD) were adopted to screen the optimal compositions of limone...
journal_title：AAPS PharmSciTech
pub_type： 杂志文章
doi：10.1208/s12249-019-1361-8
更新日期：2019-03-26 00:00:00
abstract：:Pentoxifylline (PTX), an anti-hemorrhage drug used in the treatment of intermittent claudication, is extensively metabolized by the liver resulting in a reduction of the therapeutic levels within a short duration of time. Self-nano-emulsifying drug delivery system (SNEDDS) is well reported to enhance the bio-absorptio...
journal_title：AAPS PharmSciTech
pub_type： 杂志文章
doi：10.1208/s12249-020-01644-w
更新日期：2020-04-21 00:00:00
abstract：:The objective of this study was to investigate the combined effect of pH modifiers and nucleation inhibitors on enhancing and sustaining the dissolution of AMG 009 tablet via supersaturation. Several bases and polymers were added as pH modifiers and nucleation inhibitors, respectively, to evaluate their impact on the ...
journal_title：AAPS PharmSciTech
pub_type： 杂志文章
doi：10.1208/s12249-011-9679-x
更新日期：2011-12-01 00:00:00
abstract：:This research was performed to test the hypothesis that acoustic-resonance spectrometry (ARS) is able to rapidly and accurately differentiate tablets of similar size and shape. The US Food and Drug Administration frequently orders recalls of tablets because of labeling problems (eg, the wrong tablet appears in a bottl...
journal_title：AAPS PharmSciTech
pub_type： 杂志文章
doi：10.1208/pt070125
更新日期：2006-03-01 00:00:00
abstract：:Children frequently receive medicines that are designed for adults. The dose of commercially available products is adapted, mostly based on the child's bodyweight, thereby neglecting differences in pharmacokinetic and pharmacodynamics parameters. If commercial products are unsuitable for administration to children or ...
journal_title：AAPS PharmSciTech
pub_type： 杂志文章,评审
doi：10.1208/s12249-016-0515-1
更新日期：2017-02-01 00:00:00
abstract：:The aim of this study was to formulate a new delivery system for ecological pesticides by the incorporation of Artemisia arborescens L essential oil into solid lipid nanoparticles (SLN). Two different SLN formulations were prepared following the high-pressure homogenization technique using Compritol 888 ATO as lipid a...
journal_title：AAPS PharmSciTech
pub_type： 杂志文章
doi：10.1208/pt070102
更新日期：2006-01-03 00:00:00
abstract：:The objective of this study was to investigate the release behaviour of propranolol hydrochloride from psyllium matrices in the presence hydrophilic polymers. The dissolution test was carried out at pH 1.2 and pH 6.8. Binary mixtures of psyllium and hydroxypropyl methylcellulose (HPMC) used showed that an increase in ...
journal_title：AAPS PharmSciTech
pub_type： 杂志文章
doi：10.1208/s12249-011-9687-x
更新日期：2011-12-01 00:00:00
abstract：:The purpose of this research was to evaluate a new wireless and battery-free sensor technology for invasive product temperature measurement during freeze-drying. Product temperature is the most critical process parameter in a freeze-drying process, in particular during primary drying. The product temperature over time...
journal_title：AAPS PharmSciTech
pub_type： 杂志文章
doi：10.1208/s12249-008-9099-8
更新日期：2008-01-01 00:00:00
