Abstract:
:Processing silk fibroin (SF) by electrospinning offers a very attractive opportunity for producing three-dimensional nanofibrillar matrices in tubular form, which may be useful for a biomimetic approach to small calibre vessel regeneration. Bypass grafting of small calibre vessels, with a diameter less than 6mm, is performed mainly using autografts, like the saphenous vein or internal mammary artery. At present no polymeric grafts made of SF are commercially available, mainly due to inadequate properties (low compliance and lack of endothelium cells). The aim of this work was to electrospin SF into tubular structures (Ø=6mm) for small calibre vessel grafting, characterize the morphological, chemico-physical and mechanical properties of the electrospun SF structures and to validate their potential to interact with cells. The morphological properties of electrospun SF nanofibres were investigated by scanning electron microscopy. Chemico-physical analyses revealed an increase in the crystallinity of the structure of SF nanofibres on methanol treatment. Mechanical tests, i.e. compliance and burst pressure measurements, of the electrospun SF tubes showed that the inner pressure to radial deformation ratio was linear for elongation up to 15% and pressure up to 400 mm Hg. The mean compliance value between 80 and 120 mm Hg was higher than the values reported for both Goretex(R) and Dacron(R) grafts and for bovine heterografts, but still slightly lower than those of saphenous and umbilical vein, which nowadays represent the gold standard for the replacement of small calibre arteries. The electrospun tubes resisted up to 575+/-17 mmHg, which is more than four times the upper physiological pressure of 120 mmHg and more than twice the pathological upper pressures (range 180-220 mmHg). The in vitro tests showed a good cytocompatibility of the electrospun SF tubes. Therefore, the electrospun SF tubes developed within this work represent a suitable candidate for small calibre blood vessel replacement.
journal_name
Acta Biomaterjournal_title
Acta biomaterialiaauthors
Marelli B,Alessandrino A,Farè S,Freddi G,Mantovani D,Tanzi MCdoi
10.1016/j.actbio.2010.05.008subject
Has Abstractpub_date
2010-10-01 00:00:00pages
4019-26issue
10eissn
1742-7061issn
1878-7568pii
S1742-7061(10)00235-7journal_volume
6pub_type
杂志文章abstract::Dengue results in substantial human morbidity and significant socio-economic impacts, but a specific dengue therapeutic is not available. The currently available dengue vaccine has low efficacy and high rate of adverse effects, necessitating different strategies for the development of a safer and more efficient vaccin...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2018.08.011
更新日期:2018-09-15 00:00:00
abstract::Vitamin D3 modulates immune response, induces endogenous antimicrobial peptide production, and enhances innate immunity to defend against infections. These findings suggest that incorporating vitamin D3 into medical devices or scaffolds could positively modulate host immune response and prevent infections. In the curr...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2019.08.005
更新日期:2019-10-01 00:00:00
abstract::Implantation of biomaterials into the body elicits a material-dependent inflammatory response called the foreign body reaction (FBR). Macrophages play a pivotal role in the FBR by orchestrating the pro-inflammatory microenvironment around the biomaterials by secreting cytokines, chemokines and growth factors. When the...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2013.01.022
更新日期:2013-05-01 00:00:00
abstract::Despite the rapid progress which has been made in hepatocellular carcinoma (HCC) chemotherapeutics, recurrence of liver cancer still remains a barrier to achieve satisfying prognosis. Herein, we aimed to decipher the role of berberine (BER) in chemotherapy-exacerbated HCC repopulation via developing a nanocarrier co-d...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2019.09.034
更新日期:2019-12-01 00:00:00
abstract::CRISPR gene editing technology is strategically foreseen to control diseases by correcting underlying aberrant genetic sequences. In order to overcome drawbacks associated with viral vectors, the establishment of an effective non-viral CRISPR delivery vehicle has become an important goal for nanomaterial scientists. H...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2020.07.027
更新日期:2020-09-15 00:00:00
abstract::The understanding of corrosion processes of metal implants in the human body is a key problem in modern biomaterial science. Because of the complicated and adjustable in vivo environment, in vitro experiments require the analysis of various physiological corrosion media to elucidate the underlying mechanism of "biolog...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2011.03.004
更新日期:2011-06-01 00:00:00
abstract::Multifunctional nanoplatforms offering simultaneous imaging and therapeutic functions have been recognized as a highly promising strategy for personalized nanomedicine. In this work, we synthesized a farnesylthiosalicylate (FTS, a nontoxic Ras antagonist) based triblock copolymer POEG-b-PVBA-b-PFTS (POVF) composed of ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2018.06.010
更新日期:2018-07-15 00:00:00
abstract::Despite the critical role tendons play in transmitting loads throughout the musculoskeletal system, little is known about the microstructural mechanisms underlying their mechanical function. Of particular interest is whether collagen fibrils in tendon fascicles bear load independently or if load is transferred between...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2014.01.032
更新日期:2014-06-01 00:00:00
abstract::Antibiotic resistance is a major challenge to the treatment of bacterial infections associated with medical devices and biomaterials. One important intrinsic mechanism of such resistance is the formation of persister cells that are phenotypic variants of microorganisms and highly tolerant to antibiotics. Recently, we ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2016.12.053
更新日期:2017-03-01 00:00:00
abstract::With the increasing demand for novel bone repair solutions that overcome the drawbacks of current grafting techniques, the design of artificial bone scaffolds is a central focus in bone regeneration research. Calcium phosphate scaffolds are interesting given their compositional similarity with bone mineral. The majori...
journal_title:Acta biomaterialia
pub_type: 杂志文章,评审
doi:10.1016/j.actbio.2018.11.003
更新日期:2019-01-01 00:00:00
abstract::A series of six unique Ca-based bulk metallic glasses were synthesized and characterized. The glasses were designed to consist solely of the biocompatible elements Ca, Mg and Zn, with the view to their potential use as bioresorbable metals for orthopaedic applications. The alloys had a critical casting thickness of up...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2012.03.009
更新日期:2012-07-01 00:00:00
abstract:UNLABELLED:Myofibroblasts are critical for connective tissue remodeling and wound healing since they can close wound beds and shape tissues rapidly by generating high traction forces and secreting abundant extracellular matrix proteins and matrix metalloproteinases. However, their presence in excessive numbers is assoc...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2015.12.031
更新日期:2016-03-01 00:00:00
abstract::During the past two decades, research on ceramic scaffolds for bone regeneration has progressed rapidly; however, currently available porous scaffolds remain unsuitable for load-bearing applications. The key to success is to apply microstructural design strategies to develop ceramic scaffolds with mechanical propertie...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2013.02.039
更新日期:2013-06-01 00:00:00
abstract::Delivery of vaccine antigens with an appropriate adjuvant can trigger potential immune responses against cancer leading to reduced tumor growth and improved survival. In this study, various formulations of a bioerodible amphiphilic polyanhydride copolymer based on 1,8-bis(p-carboxyphenoxy)-3,6-dioxaoctane (CPTEG) and ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2012.11.001
更新日期:2013-03-01 00:00:00
abstract::Chemically cross-linked poly(aspartic acid) (PASP) gels were prepared by the hydrolysis of poly(succinimide) (PSI). The latter was prepared by thermal polycondensation of aspartic acid. The PSI chains were cross-linked by natural amines and amino acid derivatives such as putrescin, spermine, spermidine, lysine and cys...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2007.12.004
更新日期:2008-05-01 00:00:00
abstract::The pericellular matrix (PCM) is a narrow tissue region that surrounds chondrocytes in articular cartilage. Previous parametric studies of cell-matrix interactions suggest that the mechanical properties of the PCM relative to those of the extracellular matrix (ECM) can significantly affect the micromechanical environm...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2005.02.001
更新日期:2005-05-01 00:00:00
abstract::Chitosan membranes were modified with mouse epidermal growth factor (EGF) by a photochemical technique. Photochemical immobilization was performed via a two-step process, in which EGF was first reacted with a heterobifunctional cross-linker sulfo-SANPAH (sulfosuccinimidyl 6(4'-azido-2'-nitrophenyl-amino)hexanoate) and...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2008.02.003
更新日期:2008-07-01 00:00:00
abstract::Ordered mesoporous glasses based on the 80% SiO(2)-15% CaO-5% P(2)O(5) system including up to 3.5% Ce(2)O(3), 3.5% Ga(2)O(3) or 7.0% ZnO (in mol.%) were synthesized by the evaporation-induced self-assembly process using Pluronic® 123 as a surfactant. An ordered hexagonal mesophase was observed in both the unsubstitute...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2011.05.033
更新日期:2011-09-01 00:00:00
abstract::Fluorescence resonance energy transfer (FRET) was employed to monitor the molecular dissociation of a chitosan/DNA complex with different molecular weights of chitosan. Chitosan with different molecular weights was complexed with plasmid DNA and the complex formation was monitored using dynamic light scattering and a ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2008.01.010
更新日期:2008-07-01 00:00:00
abstract::Phosphate-based glass fibers (PGFs), due to characteristics such as biodegradability and directionality, could be effective as spatial cues for axonal outgrowth following nerve injury. In the present study, PGF-containing cylindrical scaffolds of 1.8mm diameter and 3mm length were developed and implanted into the gap ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2012.01.026
更新日期:2012-05-01 00:00:00
abstract::A series of poly(2-hydroxyethyl methacrylate) (pHEMA) hydrogels containing cross-linked β-cyclodextrin-hyaluronan (β-CD-crHA), with tear protein adsorption resistance and sustained drug delivery, were developed as contact lens materials for eye diseases. β-CD-HA was synthesized from aminated β-CD and HA and then cross...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2020.04.002
更新日期:2020-07-01 00:00:00
abstract::To reduce the biocorrosion rate by surface modification, Mg-Ca alloy (1.4wt.% Ca content) was soaked in three alkaline solutions (Na(2)HPO(4), Na(2)CO(3) and NaHCO(3)) for 24h, respectively, and subsequently heat treated at 773K for 12h. Scanning electron microscopy and energy-dispersive spectroscopy results revealed ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2009.01.048
更新日期:2009-09-01 00:00:00
abstract::The development of functional therapies for corneal repair and regeneration is a pressing issue. Corneal stroma provides the principal functions of the cornea. However, because of the highly organized nature of the stromal matrix, the attempts to reproduce corneal stroma might follow a scar model. Here, we have develo...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2018.06.005
更新日期:2018-07-15 00:00:00
abstract::Three dimensional (3D) printing is highly amenable to the fabrication of tissue-engineered organs of a repetitive microstructure such as the liver. The creation of uniform and geometrically repetitive tissue scaffolds can also allow for the control over cellular aggregation and nutrient diffusion. However, the effect ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2017.12.042
更新日期:2018-03-15 00:00:00
abstract::The fibrils in the bone matrix are glued together by extracellular matrix proteins to form laminated structures (osteons) to provide elasticity and a supportive substrate for osteogenesis. The objective of this work was to investigate material properties and osteogenic differentiation of bone marrow stromal (BMS) cell...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2009.12.003
更新日期:2010-06-01 00:00:00
abstract::Three protease-resistant bioorganic 304 stainless steel surfaces were created through the reaction of synthetic peptides consisting of the D-enantiomeric isomer (D-K122-4), the retro-inverso D-enantiomeric isomer (RI-K122-4), and a combination of the two peptides (D+RI) of the Pseudomonas aeruginosa PilA receptor bind...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2012.11.026
更新日期:2013-04-01 00:00:00
abstract::Photochemical internalisation (PCI) is a method for enhancing delivery of drugs to their intracellular target sites of action. In this study we investigated the efficacy of PCI using a porphyrin photosensitiser and a cytotoxic agent on spheroid and non-spheroid compressed collagen 3D constructs of ovarian cancer versu...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2018.09.041
更新日期:2018-11-01 00:00:00
abstract::Our objective was to compare the polymerization stress (sigma(pol)) of a series of composites obtained using poly(methyl methacrylate) (PMMA) or glass as bonding substrates, and to compare the results with those from in vitro microleakage of composite restorations. The tested hypothesis was that stress values obtained...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2009.07.003
更新日期:2010-02-01 00:00:00
abstract::Topography at the nanoscale can lead to dramatic changes in the adhesion of cells to surfaces and their subsequent viability. For biological applications, including tissue engineering and cell-based sensing, the large internal surface area of ordered mesoporous carbons provides an opportunity for enhanced sensitivity ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2010.02.005
更新日期:2010-08-01 00:00:00
abstract::Although decayed/fractured teeth can be reconstructed minimally invasively and nearly invisibly using adhesive technology, the clinical longevity of dental composite restorations is still too short. Water sorption is thought to be the principal cause of destabilization of the biomaterial-tooth bond. However, the actua...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2010.03.024
更新日期:2010-09-01 00:00:00