Abstract:
:Numerous biotechnological production processes are based on the submerse cultivation of filamentous fungi. Process design, however, is often hampered by the complex growth pattern of these organisms. In the morphologic development of coagulating filamentous fungi, like Aspergillus niger, conidial aggregation is the first step of filamentous morphogenesis. For a proper description of this phenomenon it is necessary to characterize conidial populations. Kinetic studies performed with an in-line particle size analyzer suggested that two distinct aggregation steps have to be considered. The first step of conidial aggregation starts immediately after inoculation. Both the rate constants of formation and disintegration of aggregates have been determined by measuring the concentration of conidia at the beginning of the cultivation and the concentration of particles at steady state during the first hours of cultivation. In contrast to the first aggregation step, where the collision of conidia is presumed to be responsible for the process, the second aggregation step is thought to be initiated by germination of conidia. Growing hyphae provide additional surface for the attachment of non- germinated conidia, which leads to a strong decrease in particle concentration. The specific hyphal length growth rate and the ratio of particle concentration to the growing adhesion hyphal surface are decisive matters of the second aggregation step. Both aggregation steps can be described by population dynamics and simulated using the program package PARSIVAL (PARticle SIze eVALution) for the treatment of general particle population balances.
journal_name
Biotechnol Bioengjournal_title
Biotechnology and bioengineeringauthors
Lin PJ,Grimm LH,Wulkow M,Hempel DC,Krull Rdoi
10.1002/bit.21569subject
Has Abstractpub_date
2008-02-01 00:00:00pages
341-50issue
2eissn
0006-3592issn
1097-0290journal_volume
99pub_type
杂志文章abstract::Recombinant protein glycosylation profiles have been shown to affect the in-vivo half-life, and therefore the efficacy and economics, for many therapeutics. While much research has been conducted correlating the effects of various stimuli on recombinant protein glycosylation characteristics, relatively little work has...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.20439
更新日期:2005-06-05 00:00:00
abstract::The mean sizes and size distributions of air bubbles and viscous castor oil drops were studied in a salt-rich aqueous solution (medium), first separately, and then simultaneously as a three-phase system. The dispersion was created in a 150-mm-diameter stirred tank equipped with a Rushton turbine, and the sizes were me...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/(sici)1097-0290(20000720)69:2<213::aid-bit
更新日期:2000-07-20 00:00:00
abstract::The specific monoclonal antibody productivity (q(Mab)) of a murine hybridoma (CC9C10) increased with incubation temperature in the range 33 degrees C to 39 degrees C. q(Mab) was constant at each temperature and was independent of the phase of culture. The q(Mab) increased 97% at 39 degrees C and decreased by 21% at 33...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.260441011
更新日期:1994-11-20 00:00:00
abstract::A simple feeding strategy was developed and successfully employed for nutritional control in a 2-L fed-batch culture of hybridoma cells. A previously developed stoichiometric model for animal cell growth was used to design a supplemental medium for feeding. Undialyzed fetal bovine serum and trace metals (Fe(2+), SeO(3...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/(SICI)1097-0290(19960920)51:6<725::AID-BIT
更新日期:1996-09-20 00:00:00
abstract::This study investigates the scaling of photobioreactor productivity based on the growth of Nannochloropsis salina incorporating the effects of direct and diffuse light. The scaling and optimization of photobioreactor geometry was analyzed by determining the growth response of a small-scale system designed to represent...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.23324
更新日期:2012-02-01 00:00:00
abstract::This study demonstrates that masking the Feb regions of a monoclonal antibody (Mab) with synthetic antigens prior to covalent immobilization efficiency. Water-soluble adducts of poly(2-methyloxazoline) polymers and a synthetic-peptide epitope for the Mab were constructed. These synthetic antigens are referred to as Fa...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.260391005
更新日期:1992-04-25 00:00:00
abstract::A number of bioreactor configurations have been developed for the manufacture of products from mammalian cell hosts. Even in the most efficient of these, however, problems such as nutrient exhaustion, growth factor deprivation, and toxin accumulations may arise. Consequently, the current effort focused on the feasibil...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/(sici)1097-0290(20000305)67:5<555::aid-bit
更新日期:2000-03-05 00:00:00
abstract::The feasibility of producing ethanol in a continuous system from cellulose using Clostridirrrn thermocellum was investigated. This anaerobic and therniophilic bacterium was able to degrade cellulose directly into ethanol with acetic acid, hydrogen. and carbon dioxide as by-products of this fermentation. The fermentati...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.260240106
更新日期:1982-01-01 00:00:00
abstract::Air emissions from the pulp and paper industry frequently contain reduced sulfur compounds (RSC), such as dimethyl sulfide (DMS) mixed with volatile organic compounds (VOC) (e.g., methanol, MeOH) and it is desirable to treat either one or both of these groups of compounds. The objective of this study was to assess the...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.21033
更新日期:2006-11-05 00:00:00
abstract::Perfusion bioreactors have been used in different tissue engineering applications because of their consistent distribution of nutrients and flow-induced shear stress within the tissue-engineering scaffold. A widely used configuration uses a scaffold with a circular cross-section enclosed within a cylindrical chamber a...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.24368
更新日期:2012-04-01 00:00:00
abstract::A desirable feature of many therapeutic glycoprotein production processes is to maximize the final sialic acid content. In this study, the effect of applying a novel chemical analog of the sialic acid precursor N-acetylmannosamine (ManNAc) on the sialic acid content of cellular proteins and a model recombinant glycopr...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.26291
更新日期:2017-08-01 00:00:00
abstract::In biotechnology and biomedicine reliable models of cell proliferation kinetics need to capture the relevant phenomena taking place during the mitotic cycle. To this aim, a novel mathematical model helpful to investigate the intrinsic kinetics of in vitro culture of adherent cells up to confluence is proposed in this ...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.24351
更新日期:2012-03-01 00:00:00
abstract::Power densities and oxidation-reduction potentials (ORPs) of MFCs containing a pure culture of Shewanella oneidensis MR-1 were compared to mixed cultures (wastewater inoculum) in cube shaped, 1-, 2-, and 3-bottle batch-fed MFC reactor configurations. The reactor architecture influenced the relative power produced by t...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.22556
更新日期:2010-02-15 00:00:00
abstract::Continuous virus inactivation (VI) has received little attention in the efforts to realize fully continuous biomanufacturing in the future. Implementation of continuous VI must assure a specific minimum incubation time, typically 60 min. To guarantee the minimum incubation time, we implemented a packed bed continuous ...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.27292
更新日期:2020-05-01 00:00:00
abstract::Synthetic mixtures of predominant lignocellulosic hexose sugars were supplemented with separate aliquots of three inhibitory compounds (furfural, hydroxymethylfurfural (HMF), and acetic acid) in a series of concentrations and fermented by the spent sulfite liquor (SSL)-adapted yeast strain Tembec T1 and the natural is...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.20838
更新日期:2006-04-20 00:00:00
abstract::In metabolic engineering, systems which allow coordinated control of two metabolic pathways can be useful. We designed two expression systems and demonstrated their application by coordinating glycogen synthesis and degradation. The first expression vector pMSW2 expressed the glycogen synthesis genes in one operon and...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/(SICI)1097-0290(19970720)55:2<419::AID-BIT
更新日期:1997-07-20 00:00:00
abstract::The United States produces more than 10 million tons of waste oils and fats each year. This paper aims to establish a new biomanufacturing platform that converts waste oils or fats into a series of value-added products. Our research employs the oleaginous yeast Yarrowia lipolytica as a case study for citric acid (CA) ...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.27685
更新日期:2021-01-20 00:00:00
abstract::In this short review, we describe the use of high molecular weight proteins produced in the glands of several arthropods-commonly called silks-for the purpose to enhance human skin wound healing. To this end an extensive literature search has been performed, the publications have been categorized concerning silk prepa...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章,评审
doi:10.1002/bit.25654
更新日期:2015-11-01 00:00:00
abstract::Recycle batch fermentations using immobilized cells of Propionibacterium acidipropionici were studied for propionate production from whey permeate, de-lactose whey permeate, and acid whey. Cells were immobilized in a spirally wound fibrous sheet packed in a 0.5-L column reactor, which was connected to a 5-L stirred ta...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.260450502
更新日期:1995-03-05 00:00:00
abstract::Embryonic stem cells (ESCs) can differentiate into all somatic cell types, but the development of effective strategies to direct ESC fate is dependent upon defining environmental parameters capable of influencing cell phenotype. ESCs are commonly differentiated via cell aggregates referred to as embryoid bodies (EBs),...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.22578
更新日期:2010-02-15 00:00:00
abstract::The diffusivities of glucose and ethanol in cell-free and cell-occupied membranes of calcium alginate were measured in a diffusion cell. The lag time analysis was used. Diffusivities decreased with increasing alginate concentration and were comparable with those in water for a 2% alginate membrane. Glucose and ethanol...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.260280609
更新日期:1986-06-01 00:00:00
abstract::Adenoviruses are human pathogens increasingly used as gene therapy and vaccination vectors. However, their impact on cell metabolism is poorly characterized. We performed carbon labeling experiments with [1,2-13 C]glucose or [U-13 C]glutamine to evaluate metabolic alterations in the amniocyte-derived, E1-transformed 1...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.26063
更新日期:2017-01-01 00:00:00
abstract::The growth dynamics of a methanol utilizing bacterium, L3, in batch bioreactors were experimentally investigated. Formaldehyde, a key intermediate of methanol oxidation, is indicated to have a significant role in the complex batch growth behavior of L3. The intricate batch growth dynamics of many microorganisms can be...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.260261113
更新日期:1984-11-01 00:00:00
abstract::Cross-linked polyurethane (PU) was prepared for entrapping thermolysin. Using the immobilized thermolysin (IT), Z-L-aspartic acid (ZA) was reacted with -Lphenylalanine methyl ester (L-PM) in water-saturated ethyl acetate to give only alpha-Z-L-aspartylL-phenylalanine methyl ester (alpha-ZAPM). Ninety-four percent conv...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.260320504
更新日期:1988-08-20 00:00:00
abstract::Immunotherapy with ex vivo cultured T cells depends on a large supply of biologically active cells. Understanding the effects of culture parameters is essential for improving the proliferation and efficacy of the expanded cells. Low oxygen tension (5% pO(2)) was previously reported to improve T-cell expansion and alte...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.20166
更新日期:2004-08-20 00:00:00
abstract::The production of dry-grind corn ethanol results in the generation of intermediate products, thin and whole stillage, which require energy-intensive downstream processing for conversion into commercial animal feed products. Hydrothermal carbonization of thin and whole stillage coupled with anaerobic digestion was inve...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.24924
更新日期:2013-10-01 00:00:00
abstract::Dielectric spectroscopy was applied to two industrial high cell density culture processes and used to determine on-line the concentration of CHO cells immobilized on macroporous microcarriers in a stirred bioreactor and in a packed-bed of disk carriers. The cell concentration predicted from the spectroscopic data was ...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.1197
更新日期:2002-02-05 00:00:00
abstract::Membrane morphology is compared to protein depostion under passive adsorption and ultrafiltration conditions. Solute resistance of protein deposits for membranes of varying roughness, structure, and permeability can vary dramatically with operating conditions. Using Brunauer-Emmett-Teller adsorption isotherm (BET), st...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.260470208
更新日期:1995-07-20 00:00:00
abstract::As the therapeutic monoclonal antibody (mAb) market continues to grow, optimizing production processes is becoming more critical in improving efficiencies and reducing cost-of-goods in large-scale production. With the recent trends of increasing cell culture titers from upstream process improvements, downstream capaci...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.24377
更新日期:2012-04-01 00:00:00
abstract::A specially designed model reactor based on a 42-L laboratory fermentor was equipped with six stirrers (Rushton turbines) and five cylindrical disks. In this model reactor, the mixing time, Theta(90), turned out to be 13 times longer compared with the 42-L standard laboratory fermentor fitted with two Rushton turbines...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/(sici)1097-0290(19990905)64:5<599::aid-bit
更新日期:1999-09-05 00:00:00