Abstract:
OBJECTIVES:To compare the accuracies of 4 laboratory scanners using a new custom-made block for complete-arch implant rehabilitation. MATERIALS AND METHODS:A block comprised 4 cylinders, with 2 in the anterior (0° angulation) and 2 in the posterior region (45° distal angulation) (Experimental group) and a standard block with 2 parallel cones in 16° taper (ISO group), were fabricated. Both blocks were scanned consecutively for 15 times by 4 laboratory scanners: IScan, Zfx, 3Shape, and KaVo. Measurements were also made by a coordinate measuring machine (CMM) as the reference. Acquired digital models were inspected with a metrology software. Linear and angular distortions were computed evaluation of trueness, precision and expanded uncertainty of scanners. Effects of blocks and scanners on the scanning trueness and precision were analyzed by Two-way ANOVA (α = 0.05). RESULTS:The linear trueness and precision of scanners was significantly poorer when the Experimental block instead of ISO block was used. Significant greater distortions were noticed at the 45° sites than the 0° sites and no significant effect of inter-implant distance on the scanning accuracy was found. Zfx, IScan and 3Shape exhibited comparable expanded uncertainties (10.6∼11.8) but KaVo showed the greatest (19.3) in complete-arch implant scans. CONCLUSION:The ISO block might not be more suitable than the Experimental block for evaluating the accuracy of laboratory scanner for complete-arch implant scanning. All the scanners tested except one demonstrated acceptable accuracy for complete-arch implant digitization. Scanning accuracy was compromised by unfavourable angulation of implants. CLINICAL SIGNIFICANCE:It is questionable whether the laboratory scanners validated for tooth-borne cases could also perform well for implant cases. It might be necessary to develop a new calibration object specifically for complete-arch implant scenarios to verify the capability of laboratory scanners in the implant workflow.
journal_name
J Dentjournal_title
Journal of dentistryauthors
Pan Y,Tam JM,Tsoi JK,Lam WY,Huang R,Chen Z,Pow EHdoi
10.1016/j.jdent.2020.103476subject
Has Abstractpub_date
2020-11-01 00:00:00pages
103476eissn
0300-5712issn
1879-176Xpii
S0300-5712(20)30222-0journal_volume
102pub_type
杂志文章abstract:OBJECTIVES:To measure the shear bond strengths of various luting cements to a sandblasted zirconia ceramic and to determine the surface energy parameters of the luting cements. METHODS:Two conventional glass ionomer cements, two resin-modified glass ionomer cements, two compomer cements, and two adhesive resin cements...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2011.08.012
更新日期:2011-11-01 00:00:00
abstract:OBJECTIVE:This study aimed to assess the survival and success of glass fiber posts compared to cast metal posts in teeth without ferrule. MATERIAL AND METHODS:An equivalency, prospective, double-blind (patient and outcome evaluator) randomized controlled trial (RCT) with parallel groups was designed to compare the cli...
journal_title:Journal of dentistry
pub_type: 杂志文章,随机对照试验
doi:10.1016/j.jdent.2020.103334
更新日期:2020-05-01 00:00:00
abstract:OBJECTIVES:A monomer methacryloyloxydodecylpyridinium bromide (MDPB) has antibacterial activity before polymerization. Furthermore, the antibacterial agent is immobilized by the polymerization of MDPB and the resin-based material incorporating MDPB is able to show an antibacterial effect even after being cured. The pur...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/s0300-5712(97)00013-4
更新日期:1998-03-01 00:00:00
abstract:INTRODUCTION:Tooth surface loss (TSL) is an increasingly recognised problem. We are therefore seeing an increase in the number and complexity of in vitro studies investigating factors that modify effects at the tooth surface. AIM:The aim of this paper is to provide a narrative review that illustrates the more commonly...
journal_title:Journal of dentistry
pub_type: 杂志文章,评审
doi:10.1016/j.jdent.2010.01.002
更新日期:2010-03-01 00:00:00
abstract:OBJECTIVE:The purpose of this study was to evaluate restorations, previously placed in clinical trials, for the rate of wear of the proximal surfaces, by tooth position. MATERIALS AND METHODS:Seventy resin composite restorations were evaluated in bicuspids and molars. Fifty restorations were direct placement restorati...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/0300-5712(95)00040-2
更新日期:1996-01-01 00:00:00
abstract:OBJECTIVES:Purpose of this study was to determine the influence of grey-scale reversal of digital radiographic images on the detection of proximal caries. METHODS:Five observers assessed digital bitewing radiographs (Sidexis((R)), Sirona) of 320 unrestored surfaces of extracted posterior teeth embedded in 20 models, s...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2004.08.003
更新日期:2005-01-01 00:00:00
abstract::An even fitting surface is essential to obtain and maintain a healthy oral mucosa in denture wearers. The present study was designed to clarify the relationship between the surface roughness of oral mucosa and its reproduction in the corresponding fitting surface of acrylic dentures. A silicone elastomer/epoxy replica...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/0300-5712(94)90201-1
更新日期:1994-06-01 00:00:00
abstract:OBJECTIVES:Full-ceramic systems can be produced by different techniques (layering, heatpressing, CAD/CAM) and have various compositions with different crystalline contents that may affect the optical properties of laminate restorations. METHODS:A total of 60 specimens were prepared from e.max Press, e.max CAD, Empress...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2012.11.013
更新日期:2013-08-01 00:00:00
abstract:OBJECTIVES:To evaluate the ability of a Near Infrared Light Transillumination (NILT) device to detect non-cavitated approximal caries lesions; and to compare its performance to Digital Radiography (DR). METHODS:Thirty human extracted premolars (sound to lesions into the outer one-third of dentin) were selected. Lesion...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2017.05.018
更新日期:2017-08-01 00:00:00
abstract:OBJECTIVES:Methacrylic compounds such as 2-hydroxyethyl methacrylate (HEMA), triethylene glycol dimethacrylate (TEGDMA) and bisphenol A glycerolate (1 glycerol/phenol) dimethacrylate (Bis-GMA) are largely present in auto- or photopolymerizable composite resins. Since the polymerization reaction is never complete, these...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2006.07.008
更新日期:2007-03-01 00:00:00
abstract::Twenty healthy volunteers entered a study to assess cardiopulmonary responses, as measured by pulse oximetry, following changes in posture in the dental chair and the administration of Diazemuls (diazepam) in doses sufficient to instill sedation (up to a maximum dose of 20 mg) in the volunteers to a degree such that p...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/0300-5712(92)90080-v
更新日期:1992-08-01 00:00:00
abstract:OBJECTIVES:The purpose of the current study was to examine whether alumina abrasion regime influenced the necessary surface roughness conducive to mechanical interlocking prior to composite resin bonding. The impact of alumina abrasion and cement lute on the bi-axial flexure strength and associated Weibull Moduli (m) o...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2003.08.004
更新日期:2004-01-01 00:00:00
abstract:OBJECTIVE:To determine the relationship between leakage and microtensile bond strength in the same specimen of direct Class II composite restorations performed with two polymerization techniques. METHODS:Class II slot preparations were made in 40 non-carious human third molars and restored using Single Bond and P-60 (...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2005.01.001
更新日期:2005-08-01 00:00:00
abstract:OBJECTIVE:The primary goal is to develop a self-cured polyacid-modified resin composite with good mechanical and rheological properties. To achieve such a goal, the aim of this study is to determine how volume filler fraction (VFF) affects mechanical properties and viscosities of such materials containing different fil...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/s0300-5712(03)00091-5
更新日期:2003-08-01 00:00:00
abstract:OBJECTIVES:This systematic review aimed to verify if there is difference in the longevity of minimally invasive techniques compared to the complete replacement for the treatment of defective direct restorations in permanent teeth. DATA:The data included randomized controlled clinical trials comparing the clinical perf...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2018.09.001
更新日期:2018-11-01 00:00:00
abstract:OBJECTIVES:The purpose of the present review was to test the null hypothesis of no difference in the implant failure rate, marginal bone loss, and postoperative infection for patients being rehabilitated by tilted or by axially placed dental implants, against the alternative hypothesis of a difference. METHODS:An elec...
journal_title:Journal of dentistry
pub_type: 杂志文章,meta分析,评审
doi:10.1016/j.jdent.2014.09.002
更新日期:2015-02-01 00:00:00
abstract:OBJECTIVES:to explain the practice of wish-fulfilling medicine and how it relates to dentistry. SOURCES:Relevant papers, and reports from authoritative institutions were identified in Pubmed and Google Scholar. RESULTS:Wish-fulfilling medicine refers to services provided by professionals using medical methods in a me...
journal_title:Journal of dentistry
pub_type: 杂志文章,评审
doi:10.1016/j.jdent.2020.103302
更新日期:2020-05-01 00:00:00
abstract:OBJECTIVE:The purpose of this study was to determine the microtensile bond strengths of total etching adhesive systems to pulpal chamber wall dentine after treated with various irrigants. METHODS:Thirty extracted human third molars were cut horizontally to expose the pulp horn. The roof of the pulp chamber and pulp ti...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2005.01.008
更新日期:2005-09-01 00:00:00
abstract:OBJECTIVES:This study aimed to analyse if children with untreated or treated caries (restorations/missing teeth) are perceived differently compared to children with healthy teeth and to explore possible differences in the perception by laypersons and dental experts. METHODS:Eye movements of female experts (n = 20) and...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2018.05.006
更新日期:2018-07-01 00:00:00
abstract:OBJECTIVES:The aim of this study was to investigate the kinetics of protein interactions with a novel hydroxyapatite-polylactide (HA-PLA) composite membrane material. METHODS:Trilayer PLA and HA-PLA composite membranes reinforced with PLA fibres were used to absorb and release protein which was measured by a BioRad as...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2009.06.014
更新日期:2009-11-01 00:00:00
abstract::OBJECTIVES.: To compare the safety and plaque removal efficacy of two oscillating/rotating/pulsating toothbrushes (Oral-B ProfessionalCaretrade mark 7000 [PC 7000] and Oral-B 3D Excel [3DE]) and a high-frequency toothbrush (Sonicare(R) Advance, Philips Oral Healthcare; SA) in a single-use, examiner-blind, three period...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:
更新日期:2005-06-01 00:00:00
abstract:OBJECTIVES:The aim of this study was to assess the prevalence of direct restorations in posterior teeth in children aged 12, from a birth cohort, and to test the association between the quality of the restorations and individual variables experienced in the life cycle. METHODS:All live-born children in Pelotas, in 200...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2019.103183
更新日期:2019-10-01 00:00:00
abstract:OBJECTIVE:The aim of this study was to identify factors influencing the selection of restorative materials. METHODS:In 1992, a random sample of Finnish dentists working in the public and private health care sectors were asked to provide information on restorative treatments during a given period. The study material co...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/0300-5712(95)00070-4
更新日期:1996-07-01 00:00:00
abstract:PURPOSE:This study determined the shear bond strength of a nanohybrid composite resin to bleached enamel immediately or 15 days later using different adhesive systems and laser application. METHODS:One hundred and forty enamel specimens were prepared from human molar teeth and bleached either with 16% carbamide peroxi...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2009.03.012
更新日期:2009-07-01 00:00:00
abstract:OBJECTIVES:To evaluate the effect of hydrothermal aging (H), mechanical cycling (M), and the combination of hydrothermal plus mechanical cycling (H+M) on biaxial flexural strength (BFS) and microstructure of two monolithic zirconias, indicated for anterior (AMZ) or posterior restorations (PMZ) and a conventional zircon...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2017.05.021
更新日期:2017-08-01 00:00:00
abstract:OBJECTIVES:Traditional mechanical methods of retaining restorative materials have been replaced to a large extent by tooth conserving adhesive restorative techniques. Because adhesives have been evolving so rapidly for the last few years, the timing is right for evaluating the clinical status of present day adhesives. ...
journal_title:Journal of dentistry
pub_type: 杂志文章,评审
doi:10.1016/s0300-5712(96)00070-x
更新日期:1998-01-01 00:00:00
abstract:OBJECTIVES:The bonding of resin to dentine is dependent largely on surface modifications. The purpose of the present study was to test the hypothesis that a role of the metal chlorides used as primers is to initiate polymerization of resin at the resin-dentine interface, thereby affecting bond strength. METHODS:Nine p...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/s0300-5712(97)00030-4
更新日期:1998-09-01 00:00:00
abstract:OBJECTIVES:Small and hydrophilic monomers as HEMA and TEGDMA can easily penetrate human tissues. For biocompatibility issues it is therefore better to avoid such monomers in dental adhesive formulations. The purpose of this study was (1) to determine the micro-tensile bond strength (muTBS) to enamel/dentin of a HEMA/TE...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/j.jdent.2008.05.012
更新日期:2008-10-01 00:00:00
abstract:OBJECTIVES:Firstly, to evaluate the in vitro anti-erosion efficacy of a new mouthrinse formulation containing 450 ppm fluoride using profilometry and microindentation. Secondly, to compare fluoride uptake by erosive lesions from two mouthrinses containing different fluoride sources using dynamic secondary ion mass spec...
journal_title:Journal of dentistry
pub_type: 杂志文章
doi:10.1016/S0300-5712(11)70004-5
更新日期:2010-11-01 00:00:00
abstract::Ultrasound in the kHz frequency range is used widely in clinical dentistry. The most common uses are in the fields of periodontology and endodontics. The ultrasonic scaler works by the vibratory chipping action of the oscillating tip and is assisted by the presence of cavitational activity in the associated cooling wa...
journal_title:Journal of dentistry
pub_type: 杂志文章,评审
doi:10.1016/0300-5712(92)90003-u
更新日期:1992-02-01 00:00:00