Abstract:
:The improvements in healthcare systems and the advent of the precision medicine initiative have created the need to develop more innovative manufacturing methods for the delivery and production of individualized dosing and personalized treatments. In accordance with the changes observed in healthcare systems towards more innovative therapies, this paper presents dropwise additive manufacturing of pharmaceutical products (DAMPP) for small scale, distributed manufacturing of individualized dosing as an alternative to conventional manufacturing methods A dropwise additive manufacturing process for amorphous and self-emulsifying drug delivery systems is reported, which utilizes drop-on-demand printing technology for automated and controlled deposition of melt-based formulations onto inert tablets. The advantages of drop on demand technology include reproducible production of droplets with adjustable sizing and high placement accuracy, which enable production of individualized dosing even for low dose and high potency drugs. Flexible use of different formulations, such as lipid-based formulations, allows enhancement of the solubility of poorly water soluble and highly lipophilic drugs with DAMPP. Here, DAMPP is used to produce solid oral dosage forms from melts of an active pharmaceutical ingredient and a surfactant. The dosage forms are analyzed to show the amorphous nature, self-emulsifying drug delivery system characteristics and dissolution behavior of these formulations.
journal_name
Int J Pharmjournal_title
International journal of pharmaceuticsauthors
Içten E,Purohit HS,Wallace C,Giridhar A,Taylor LS,Nagy ZK,Reklaitis GVdoi
10.1016/j.ijpharm.2017.04.003subject
Has Abstractpub_date
2017-05-30 00:00:00pages
424-432issue
1-2eissn
0378-5173issn
1873-3476pii
S0378-5173(17)30283-1journal_volume
524pub_type
杂志文章abstract::This paper reports measurements of the release characteristics of the model drug salbutamol from a liquid crystalline vehicle across both human and hairless murine skin in vitro. The use of oleic acid and iontophoresis as penetration enhancement techniques, used separately and simultaneously, was also investigated. Ov...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2007.04.004
更新日期:2007-08-16 00:00:00
abstract::The purpose of this study was to synthesize and characterize biodegradable and thermosensitive triblock copolymers for delivering protein at controlled rate in biologically active form for longer duration of time. A series of thermosensitive triblock copolymers with different block lengths (PLGA-PEG-PLGA) were synthes...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2004.09.026
更新日期:2005-01-20 00:00:00
abstract::Insulin, a key peptide hormone that conjointly with its receptor regulates blood glucose levels, is used as the major means to treat diabetes. This therapeutic hormone may undergo different chemical modifications during industrial processes, pharmaceutical formulation, and through its endogenous storage in the pancrea...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章,评审
doi:10.1016/j.ijpharm.2018.06.023
更新日期:2018-08-25 00:00:00
abstract::Solid lipid nanoparticles (SLNs) conjugated with tamoxifen (TX) and lactoferrin (Lf) were applied to carry anticancer carmustine (BCNU) across the blood-brain barrier (BBB) for enhanced antiproliferation against glioblastoma multiforme (GBM). BCNU-loaded SLNs with modified TX and Lf (TX-Lf-BCNU-SLNs) were used to pene...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2015.12.054
更新日期:2016-02-29 00:00:00
abstract::The aim of the current study is the evaluation of a recently optimized SEDDS, composed of Solutol HS15 and medium chain glycerides, and self-emulsifying pellets by means of ESR. Tempol-benzoate (TB)-loaded SEDDS were produced and electron spin resonance (ESR) spectroscopy was used to evaluate the diluted self-emulsify...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2008.09.014
更新日期:2009-02-09 00:00:00
abstract::The content of latanoprost, a therapeutic drug for glaucoma, is likely to decrease in solution. In a previous study, we confirmed that this was associated with latanoprost adsorption to the container and hydrolysis of latanoprost, and established a formulation of latanoprost eye drop solution that can be stored at roo...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2012.07.027
更新日期:2012-10-15 00:00:00
abstract::We report the synthesis, in vitro and in vivo investigation of folate-targeted, biocompatible, biodegradable self-assembled nanoparticles radiolabelled with (99m)Tc, as potential new SPECT or SPECT/CT imaging agent. Nanoparticles with hydrodynamic size in the range of 75-200 nm were prepared by self-assembly of chitos...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2013.03.049
更新日期:2013-06-05 00:00:00
abstract::The aim of this study was to generate a new type of nanoparticles made of chitosan (CS) and carboxymethyl-beta-cyclodextrin (CM-beta-CD) and to evaluate their potential for the association and delivery of macromolecular drugs. CS and CM-beta-CD or mixtures of CM-beta-CD/tripolyphosphate (TPP) were processed to nanopar...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2007.03.005
更新日期:2007-08-01 00:00:00
abstract::An innovative approach to improve drug delivery is the use of glycerol monooleate nanoparticles. Numerous studies describe their high versatility, low toxicity and ability to carry relatively high loads of conjugated compounds including scarcely soluble ones, providing sustained drug release and increasing drug diffus...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2018.01.035
更新日期:2018-03-25 00:00:00
abstract::Near-infrared chemical imaging (NIR-CI) with high-speed cameras based on the push-broom acquisition principle is a rapidly-evolving and can be used for a variety of purposes, from classification (and sorting) of products to mapping spatial distribution of materials. The present study examined if NIR-CI is suitable for...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2016.12.003
更新日期:2017-02-25 00:00:00
abstract::The primary aim of the study was to investigate the effects of pulsed liquid feed on granule size. The secondary aim was to increase knowledge of this technique in granule size targeting. Pulsed liquid feed refers to the pump changing between on- and off-positions in sequences, called duty cycles. One duty cycle consi...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2009.04.041
更新日期:2009-07-30 00:00:00
abstract::Three-dimensional printing includes a wide variety of manufacturing techniques, which are all based on digitally-controlled depositing of materials (layer-by-layer) to create freeform geometries. Therefore, three-dimensional printing processes are commonly associated with freeform fabrication techniques. For years, th...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章,评审
doi:10.1016/j.ijpharm.2015.12.071
更新日期:2016-02-29 00:00:00
abstract::The present study aimed to develop an in situ gel formulation for intranasal delivery of tacrine (THA), an anti-Alzheimer's drug. Thermosensitive polymer Pluronic F-127 was used to prepare THA in situ gels. Sol-gel transition temperature (Tsol-gel), rheological properties, in vitro release, and in vivo nasal mucocilia...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2014.04.015
更新日期:2014-07-01 00:00:00
abstract::A new set of 142 experimentally determined complexation constants between sulfobutylether-β-cyclodextrin and diverse organic guest molecules, and 78 observations reported in literature, were used for the development of the QSPR models by the two machine learning regression methods - Cubist and Random Forest. Similar m...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2011.03.065
更新日期:2011-10-14 00:00:00
abstract::Nanocarriers may provide interesting delivery platforms for microbicide drugs and their characterization should be addressed early in development. Differently surface-engineered dapivirine-loaded, poly(epsilon-caprolactone) (PCL)-based nanoparticles (NPs) were obtained by nanoprecipitation using polyethylene oxide (PE...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2013.08.049
更新日期:2013-11-18 00:00:00
abstract::Nanoparticles delivery of oligonucleotides represents a potential approach for cancer treatment. However, most of the experiments were based on established cancer cell lines and may not reflect the original solid tumor in vivo. Both, tumor microenvironment and tumor cell biological properties in the tumor can influenc...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2011.07.009
更新日期:2011-10-31 00:00:00
abstract::In the present study, we developed and evaluated an in situ gelling system based on hexanoyl glycol chitosan (H-GCS) for enhanced ocular bioavailability. An aqueous solution of H-GCS exhibited a typical sol-gel transition at 32 °C. The formed H-GCS hydrogel was characterized by rheology and scanning electron microscop...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2019.118688
更新日期:2019-10-30 00:00:00
abstract::For drug delivery to the lungs, the aerodynamic size of drug particles plays a predominant role in determining the sites of deposition in the airway, and the particles with the size less than 2μm are highly expected as they will be preferably delivered to the ideal site of alveolar regions. In this paper, a novel plat...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2017.07.040
更新日期:2017-09-15 00:00:00
abstract::Recent investigations both in vitro and in human subjects proved the benefit/risk ratio of prednicarbate (PC) to exceed those of halogenated topical glucocorticoids about 2-fold. To obtain a further highly desired increase by drug targeting to viable epidermis, PC was incorporated into solid lipid nanoparticles (SLN)....
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/s0378-5173(99)00413-5
更新日期:2000-03-10 00:00:00
abstract::This note describes a novel application of the food processing technology, known as high pressure processing (HPP), to the extraction of essential components of herbs. Herbal extracts may be used as drugs, as well as ingredients in food and cosmetics. We have run some pilot studies in our laboratories to demonstrate t...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2004.02.029
更新日期:2004-07-08 00:00:00
abstract::Human sodium taurocholate co-transporting polypeptide (NTCP) is the main bile acid uptake transporter in the liver with the capability to translocate xenobiotics. While its inhibitor requirements have been recently characterized, its substrate requirements have not. The objectives of this study were (a) to elucidate N...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2014.11.022
更新日期:2015-01-15 00:00:00
abstract::Metoprolol succinate extended release tablets comprise a multiple unit system containing metoprolol succinate in a multitude of controlled release pellets. Each pellet acts as a separate drug delivery unit and is designed to deliver metoprolol continuously over the dosage interval. Despite the flexibility that control...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2010.09.004
更新日期:2010-11-30 00:00:00
abstract::Electrospun composite zein/eudragit nanofibers were developed with an aim to deliver two different classes of drugs simultaneously that would restrict/compensate the adverse effects of non-steroidal anti-inflammatory drugs (NSAIDs). Co-administration of proton pump inhibitors is beneficial for patients consuming NSAID...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2012.07.075
更新日期:2012-11-15 00:00:00
abstract::There are a range of products available which claim to accelerate the healing of burns; these include topical agents, interactive dressings and biomembranes. The aim of this study was to assess the effect of a gelatin-based membrane containing usnic acid/liposomes on the healing of burns in comparison to silver sulfad...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2016.09.040
更新日期:2016-11-20 00:00:00
abstract::A Therapeutic Nipple Shield (TNS) was previously developed to respond to the global need for new infant therapeutic delivery technologies. However, the release efficiency for the same Active Pharmaceutical Ingredient (API) from different therapeutic matrices within the TNS formulation has not yet been investigated. To...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2017.12.042
更新日期:2018-02-15 00:00:00
abstract::Dry powder inhalers (DPIs) are widely used to deliver respiratory medication as a fine powder. This study investigates the physical mechanism of DPI operation, assessing the effects of geometry, inhalation and powder type on dose fluidisation. Patient inhalation through an idealised DPI was simulated as a linearly inc...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2008.03.038
更新日期:2008-06-24 00:00:00
abstract::Among different technological variables that influence drug release from hydrophilic matrices, different proportions of the polymer and a water-soluble excipient have been used to control the drug release properties. These variables were used to modify the drug release rate and to examine its effect on the mechanism c...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/s0378-5173(03)00150-9
更新日期:2003-05-12 00:00:00
abstract::The aim of this study was to investigate the in vitro dissolution characteristics of pH-responsive polymers in a variety of simulated fluids. Prednisolone tablets were fabricated and coated with the following polymer systems: Eudragit S (organic solution), Eudragit S (aqueous dispersion), Eudragit FS (aqueous dispersi...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2005.10.038
更新日期:2006-02-03 00:00:00
abstract::Titration calorimetry was used to investigate the interaction between a model antigen, bovine serum albumin (BSA), and a model particulate carrier, polystyrene (PS). The binding enthalpy was much higher than reported in the literature for a similar system and did not display a sigmoidal binding curve. These experiment...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2005.02.037
更新日期:2005-07-25 00:00:00
abstract::Nanoparticles formulated from biodegradable polymers such as poly (lactic acid) and poly (D,L-lactide-co-glycolide) (PLGA) are being extensively investigated as non-viral gene delivery systems due to their sustained release characteristics and biocompatibility. PLGA nanoparticles for DNA delivery are mainly formulated...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/s0378-5173(02)00315-0
更新日期:2002-09-05 00:00:00