Modeling and simulation of compact strength due to particle bonding using a hybrid discrete-continuum approach.

Abstract:

:The compaction of powder beds into solid bodies occurs by virtue of the formation of inter-particle bonds. The mechanical strength of the compact depends on the type of bonding interaction, as well as, the inter-particle contact area created in the compression process. A hybrid quasi-continuum computational approach has been implemented to study the bonding occurring in compressed granular assemblies. The approach resolves the powder bed on the particle level, allowing for the tracking of contact area generated by particle deformation and the computation of history-dependent inter-particle bonding forces. The magnitude of the bonding force is calculated using a synthetically constructed potential aiming to mimic the shape of typical molecular-type interactions. The uniaxial compaction and subsequent relaxation of powder beds, representative of pharmaceutical excipients have been simulated. Due to the bonding occurring between the individual particles the compressed beds acquire tensile strength. Post-relaxation tensile loading of the compacts is used to quantify the magnitude of this tensile strength. To validate the computational results, tablets are prepared using a compaction simulator under conditions closely resembling the simulated scenarios, where subsequently the tablets are subjected to tensile loads until failure. The predicted values for the tablet strength utilizing the present methodology capture the general trends exhibited by the experimental record.

journal_name

Int J Pharm

authors

Koynov A,Akseli I,Cuitiño AM

doi

10.1016/j.ijpharm.2011.06.006

subject

Has Abstract

pub_date

2011-10-14 00:00:00

pages

273-85

issue

2

eissn

0378-5173

issn

1873-3476

pii

S0378-5173(11)00537-0

journal_volume

418

pub_type

杂志文章
  • Formation of the dispersed particles composed of retinol and phosphatidylchiline.

    abstract::The purpose of this study was to investigate the dispersal mechanism of retinol (Vitamin A, VA) into phospholipid. VA was dispersed with soybean phosphatidylcholine (PC) using sonication and the dispersal mechanism was evaluated by characterizing the dispersed particles using dynamic light scattering, fluorescence spe...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/s0378-5173(02)00677-4

    authors: Asai Y

    更新日期:2003-03-06 00:00:00

  • A novel aqueous parenteral formulation of docetaxel using prodrugs.

    abstract::The aim of this study is to develop an aqueous parenteral solution of docetaxel using prodrugs. Docetaxel (DTX) is a highly lipophilic drug and practically insoluble in water. To overcome insolubility of docetaxel, three kinds of docetaxel prodrugs were synthesized using succinyl linker such as DTX-G, DTX-L or DTX-S a...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2013.12.027

    authors: Park MH,Keum CG,Song JY,Kim D,Cho CW

    更新日期:2014-02-28 00:00:00

  • BCNU-loaded poly(D, L-lactide-co-glycolide) wafer and antitumor activity against XF-498 human CNS tumor cells in vitro.

    abstract::Implantable polymeric device that can release chemotherapeutic agent directly into central nervous system (CNS) has had an impact on malignant glioma therapy. The purpose of our study was to develop an implantable polymeric device, which can release intact 1,3-bis(2-chloroethyl)-1-nitrosourea (BCNU) for long-term peri...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/s0378-5173(02)00543-4

    authors: Seong H,An TK,Khang G,Choi SU,Lee CO,Lee HB

    更新日期:2003-01-30 00:00:00

  • Swelling, melting point reduction and solubility of PEG 1500 in supercritical CO2.

    abstract::The knowledge of the solubility of PEG 1500 as well as the swelling and melting point variation in supercritical CO(2) in a relatively high-pressure range is a necessary prerequisite to set-up pharmaceutical processes dealing with the polymer in the molten state. Experiments carried out in a pressurized view cell indi...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2007.12.048

    authors: Pasquali I,Comi L,Pucciarelli F,Bettini R

    更新日期:2008-05-22 00:00:00

  • Use of lidocaine-prilocaine patch for the mantoux test: Influence on pain and reading.

    abstract::A formulation of a eutectic mixture of lidocaine-prilocaine (EMLA) changes basal skin perfusion. Its use for alleviating pain associated with the Mantoux test may modify the recruitment of sensitised lymphocytes and then the response to tuberculin test. Twenty-four healthy BCG-vaccinated volunteers (26.7+/-4.1 years) ...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章,随机对照试验

    doi:10.1016/j.ijpharm.2006.07.037

    authors: Dubus JC,Mely L,Lanteaume A

    更新日期:2006-12-11 00:00:00

  • Mesoporous silica nanoparticles as a promising skin delivery system for methotrexate.

    abstract::The systemic administration of methotrexate (MTX), a commonly used, antineoplastic drug which is also used in cutaneous disorders, is primarily associated with prolonged retention in the body and consequently with side effects. Innovative drug delivery techniques and alternative administration routes would therefore c...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2017.07.058

    authors: Sapino S,Oliaro-Bosso S,Zonari D,Zattoni A,Ugazio E

    更新日期:2017-09-15 00:00:00

  • Search for technological reasons to develop a capsule or a tablet formulation with respect to wettability and dissolution.

    abstract::Proquazone, a poorly wettable compound, was used as a model drug in the search for reasons to develop a capsule or tablet formulation. The capsules were filled with proquazone as active ingredient, with lactose monohydrate (200 mesh) as filler and with magnesium stearate as lubricant. The tablet was made out of a gran...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2004.09.006

    authors: von Orelli J,Leuenberger H

    更新日期:2004-12-09 00:00:00

  • Evaluation of the potential of ion pair formation to improve the oral absorption of two potent antiviral compounds, AMD3100 and PMPA.

    abstract::9-(2-phosphonyomethoxypropyl)adenine (PMPA) and AMD3100 are highly potent and selective antiretroviral agents. Since PMPA is negatively charged and AMD3100 positively charged at physiological pH, their transepithelial transport and their potential for oral drug delivery is very low. In this study, ion pair formation w...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/s0378-5173(99)00150-7

    authors: Van Gelder J,Witvrouw M,Pannecouque C,Henson G,Bridger G,Naesens L,De Clercq E,Annaert P,Shafiee M,Van den Mooter G,Kinget R,Augustijns P

    更新日期:1999-09-20 00:00:00

  • Investigation of L-leucine in reducing the moisture-induced deterioration of spray-dried salbutamol sulfate power for inhalation.

    abstract::The aim of this study was to investigate the ability of L-leucine (LL) in preventing moisture-induced deterioration in the in vitro aerosolization performance of spray-dried (SD) salbutamol sulfate (SS). Increasing mass fraction of LL (5-80%) were co-spray dried with SS, and the physicochemical properties of the powde...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2017.07.033

    authors: Li L,Leung SSY,Gengenbach T,Yu J,Gao GF,Tang P,Zhou QT,Chan HK

    更新日期:2017-09-15 00:00:00

  • Short multi-armed polylysine-graft-polyamidoamine copolymer as efficient gene vectors.

    abstract::Polyamidoamine-polylysine graft copolymers (PAMAM-g-PLL) were prepared by ring-opening polymerization of benzyloxycarbonyl lysine N-carboxyanhydride (Lys(Z)-NCA) initiated with primary amine of generation 4 polyamidoamine (PAMAM G4) and subsequent deprotection of polyamidoamine-poly-(benzyloxycarbonyl lysine) copolyme...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2011.08.036

    authors: Pan S,Wang C,Zeng X,Wen Y,Wu H,Feng M

    更新日期:2011-11-28 00:00:00

  • Ethanol effects on drug release from Verapamil Meltrex, an innovative melt extruded formulation.

    abstract::The potential effect of ethanol to accelerate drug release from sustained release (SR) oral formulations is a general concern. Marketed Verapamil is a calcium channel blocker, mainly used as antihypertensive and anti-anginal drug and available in various dose and dosage forms. One is Verapamil Meltrex, combining an in...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2008.09.052

    authors: Roth W,Setnik B,Zietsch M,Burst A,Breitenbach J,Sellers E,Brennan D

    更新日期:2009-02-23 00:00:00

  • Prolongation of residence time of liposome by surface-modification with mixture of hydrophilic polymers.

    abstract::The objective of this study is to evaluate the biodistribution characteristics of liposomes surface-modified with the mixture of polyethylene glycol (PEG) and polyvinyl alcohol (PVA) as a drug carrier for passive targeting of drugs. The liposomes (egg phosphatidylcholine:cholesterol=55:40, molar ratio) modified with b...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2008.04.004

    authors: Shehata T,Ogawara K,Higaki K,Kimura T

    更新日期:2008-07-09 00:00:00

  • Deoxycholate-hydrogels: novel drug carrier systems for topical use.

    abstract::Na-deoxycholate (Na-DOC) forms a viscous thixotropic gel when in contact with excess buffer systems. The resulting gels have been tested as novel drug carrier systems for topical use. The influence of differing amounts of mannitol, glycerol and xylitol on the viscous modulus (G"/Pa) was evaluated by oscillatory measur...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/s0378-5173(99)00170-2

    authors: Valenta C,Nowack E,Bernkop-Schnürch A

    更新日期:1999-08-05 00:00:00

  • Inhalation of tobramycin in cystic fibrosis. Part 2: optimization of the tobramycin solution for a jet and an ultrasonic nebulizer.

    abstract::The inhalation of tobramycin is part of current cystic fibrosis (CF) therapy. Local therapy with inhaled antibiotics has demonstrated improvements in pulmonary function. Current inhalation therapy is limited by the available drug formulations in combination with the nebulization time. The aim of this study is to devel...

    journal_title:International journal of pharmaceutics

    pub_type: 评论,杂志文章

    doi:10.1016/s0378-5173(99)00252-5

    authors: Le Brun PP,de Boer AH,Gjaltema D,Hagedoorn P,Heijerman HG,Frijlink HW

    更新日期:1999-11-05 00:00:00

  • Influence of different parameters on reconstitution of lyophilized SLN.

    abstract::Drug-loaded solid lipid nanoparticles (SLN) suitable for parenteral administration were freeze-dried. The lipid matrix Imwitor 900 (concentration, 2.5%) was stabilized with Lipoid E 80 and sodium glycocholate. The influence of different parameters of lyophilization like the protective effect of cryoprotectants, freezi...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/s0378-5173(99)00424-x

    authors: Zimmermann E,Müller RH,Mäder K

    更新日期:2000-03-10 00:00:00

  • A new topical formulation for psoriasis: development of methotrexate-loaded nanostructured lipid carriers.

    abstract::The aim of the present work was to develop and assess the potential of nanostructured lipid carriers (NLCs) loaded with methotrexate as a new approach for topical therapy of psoriasis. Methotrexate-loaded NLCs were prepared via a modified hot homogenization combined with ultrasonication techniques using either polysor...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2014.10.067

    authors: Pinto MF,Moura CC,Nunes C,Segundo MA,Costa Lima SA,Reis S

    更新日期:2014-12-30 00:00:00

  • An effective novel delivery strategy of rasagiline for Parkinson's disease.

    abstract::This is the first report on the efficacy of a new controlled release system developed for rasagiline mesylate (RM) in a rotenone-induced rat model of Parkinson's disease (PD). PLGA microspheres in vitro released RM at a constant rate of 62.3 μg/day for two weeks. Intraperitoneal injection of rotenone (2 mg/kg/day) to ...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2011.07.029

    authors: Fernández M,Negro S,Slowing K,Fernández-Carballido A,Barcia E

    更新日期:2011-10-31 00:00:00

  • Stability and activity of hydroxyethyl starch-coated polyplexes in frozen solutions or lyophilizates.

    abstract::Despite their great potential, gene delivery polyplexes have a number of limitations, including their tendency for aggregation in vivo or upon storage. In previous studies, we could show that hydroxyethyl starch (HES)-decoration of polyplexes reduces aggregation in vitro and in vivo. The current study investigates the...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2014.04.020

    authors: Noga M,Edinger D,Wagner E,Winter G,Besheer A

    更新日期:2014-07-20 00:00:00

  • Polysaccharide-anchored fatty acid liposome.

    abstract::In this study, the preparation of N-pamitoyl chitosan (ChP) anchored oleic acid (OA) liposome was demonstrated. Two different types of water-soluble ChPs with different degrees of acylation (DA) were selected for this study. The presence of ChPs on the surface of OA liposome was confirmed with their micrographs and ph...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2012.11.013

    authors: Tan HW,Misran M

    更新日期:2013-01-30 00:00:00

  • Development of PMMA membranes functionalized with hydroxypropyl-beta-cyclodextrins for controlled drug delivery using a supercritical CO(2)-assisted technology.

    abstract::Cyclodextrin-containing polymers have proved themselves to be useful for controlled release. Herein we describe the preparation of membranes of poly(methylmethacrylate) (PMMA) containing hydroxypropyl-beta-cyclodextrins (HP-beta-CDs) using a supercritical CO(2)-assisted phase inversion method, for potential applicatio...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2009.04.029

    authors: Temtem M,Pompeu D,Jaraquemada G,Cabrita EJ,Casimiro T,Aguiar-Ricardo A

    更新日期:2009-07-06 00:00:00

  • Ionic liquids as ingredients in topical drug delivery systems.

    abstract::Because of their properties, ionic liquids (ILs) (Ranke et al.) offer many advantages in topical drug delivery systems. For example, ionic liquids can be used to increase the solubility of sparingly soluble drugs and to enhance their topical and transdermal delivery. Furthermore, ILs can be used either to synthesize a...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2012.10.035

    authors: Dobler D,Schmidts T,Klingenhöfer I,Runkel F

    更新日期:2013-01-30 00:00:00

  • Physical ageing and thermal analysis of PLGA microspheres encapsulating protein or DNA.

    abstract::PLGA microspheres undergo physical ageing but their ageing kinetics have not been reported, nor the effect of encapsulated protein or plasmid DNA on any associated changes to the glass transition. Differential scanning calorimetry (DSC) was used to measure the rate of ageing of various PLGA microsphere formulations, w...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2007.02.026

    authors: Rouse JJ,Mohamed F,van der Walle CF

    更新日期:2007-07-18 00:00:00

  • Stereolithographic (SLA) 3D printing of oral modified-release dosage forms.

    abstract::The aim of this work was to evaluate the suitability of stereolithography (SLA) to fabricate drug-loaded tablets with modified-release characteristics. The SLA printer creates solid objects by using a laser beam to photopolymerise monomers. In this work polyethylene glycol diacrylate (PEGDA) was used as a monomer and ...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2016.03.016

    authors: Wang J,Goyanes A,Gaisford S,Basit AW

    更新日期:2016-04-30 00:00:00

  • Saturated fatty acids and fatty acid esters promote the polymorphic transition of clarithromycin metastable form I crystal.

    abstract::The phase transition of active pharmaceutical ingredients should be taken into account during manufacturing, processing- and storage, because different crystal forms lead to different physical properties of formulations. The phase transition of clarithromycin (CAM) metastable form I to stable form II was investigated ...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2016.08.041

    authors: Watanabe M,Mizoguchi M,Aoki H,Iwao Y,Noguchi S,Itai S

    更新日期:2016-10-15 00:00:00

  • Preparation and characterization of stable nanoliposomal formulations of curcumin with high loading efficacy: In vitro and in vivo anti-tumor study.

    abstract::Liposomal formulations were made using Solvent-assisted active loading technology (SALT). Two formulations composed of HSPC:DPPG:Chol:DSPE-mPEG2000 (PG-LipCUR) and HSPC:Chol:DSPE-mPEG2000 (LipCUR) demonstrated good colloidal properties and the CUR-encapsulation of 82% and 89% for PG-LipCUR and LipCUR, respectively. Th...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2020.119211

    authors: Karimi M,Gheybi F,Zamani P,Mashreghi M,Golmohammadzadeh S,Darban SA,Badiee A,Jaafari MR

    更新日期:2020-04-30 00:00:00

  • Gelation of the internal core of liposomes as a strategy for stabilization and modified drug delivery I. Physico-chemistry study.

    abstract::Since the application of nanotechnology to drug delivery, both polymer-based and lipid-based nanocarriers have demonstrated clinical benefits, improving both drug efficacy and safety. However, to further address the challenges of the drug delivery field, hybrid lipid-polymer nanocomposites have been designed to merge ...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2020.119467

    authors: Petralito S,Paolicelli P,Nardoni M,Trilli J,Di Muzio L,Cesa S,Relucenti M,Matassa R,Vitalone A,Adrover A,Casadei MA

    更新日期:2020-07-30 00:00:00

  • Integrity and stability of oral liposomes containing bile salts studied in simulated and ex vivo gastrointestinal media.

    abstract::The objective of this study was to investigate the integrtity and stability of oral liposomes containing glycocholate (SGC-Lip) in simulated gastrointestinal (GI) media and ex vivo GI media from rats in comparison with conventional liposomes (CH-Lip) composed of soybean phosphatidylcholine and cholesterol. Membrane in...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2012.10.025

    authors: Hu S,Niu M,Hu F,Lu Y,Qi J,Yin Z,Wu W

    更新日期:2013-01-30 00:00:00

  • Kinetics and mechanism of polymorphic transformation of sorbitol under mechanical milling.

    abstract::In this paper, we present a kinetic investigation of the polymorphic transformation γ → α of sorbitol under milling in the objective to identify the microscopic mechanisms that govern this type of solid-state transformation. The milling was performed with a high energy planetary mill and the milled material was analys...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2020.119902

    authors: Dupont A,Guerain M,Danède F,Paccou L,Guinet Y,Hédoux A,Willart JF

    更新日期:2020-11-30 00:00:00

  • Characterisation of solid dispersions of paracetamol and EUDRAGIT E prepared by hot-melt extrusion using thermal, microthermal and spectroscopic analysis.

    abstract::Hot-melt extrusion has attracted considerable interest within the pharmaceutical industry. However, there remains some uncertainty as to how to characterise the physical structure of the extruded systems, particularly in terms of identifying the nature of the drug dispersion within the polymer. The aim of the study wa...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2007.11.048

    authors: Qi S,Gryczke A,Belton P,Craig DQ

    更新日期:2008-04-16 00:00:00

  • Combinatorial design of passive drug delivery platforms.

    abstract::We introduce a novel computational approach to designing passive drug delivery systems based on porous materials such as hydrogels. Our approach uses three tools: a method to establish the exact release pattern from all possible loading sites inside a given hydrogel; a method to generate a large number of hydrogel str...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2007.02.029

    authors: Casault S,Kenward M,Slater GW

    更新日期:2007-07-18 00:00:00