Influence of process and formulation parameters on dissolution and stability characteristics of Kollidon® VA 64 hot-melt extrudates.

Abstract:

:The objective of the present study was to investigate the effects of processing variables and formulation factors on the characteristics of hot-melt extrudates containing a copolymer (Kollidon® VA 64). Nifedipine was used as a model drug in all of the extrudates. Differential scanning calorimetry (DSC) was utilized on the physical mixtures and melts of varying drug-polymer concentrations to study their miscibility. The drug-polymer binary mixtures were studied for powder flow, drug release, and physical and chemical stabilities. The effects of moisture absorption on the content uniformity of the extrudates were also studied. Processing the materials at lower barrel temperatures (115-135°C) and higher screw speeds (50-100 rpm) exhibited higher post-processing drug content (~99-100%). DSC and X-ray diffraction studies confirmed that melt extrusion of drug-polymer mixtures led to the formation of solid dispersions. Interestingly, the extrusion process also enhanced the powder flow characteristics, which occurred irrespective of the drug load (up to 40% w/w). Moreover, the content uniformity of the extrudates, unlike the physical mixtures, was not sensitive to the amount of moisture absorbed. The extrusion conditions did not influence drug release from the extrudates; however, release was greatly affected by the drug loading. Additionally, the drug release from the physical mixture of nifedipine-Kollidon® VA 64 was significantly different when compared to the corresponding extrudates (f2 = 36.70). The extrudates exhibited both physical and chemical stabilities throughout the period of study. Overall, hot-melt extrusion technology in combination with Kollidon® VA 64 produced extrudates capable of higher drug loading, with enhanced flow characteristics, and excellent stability.

journal_name

AAPS PharmSciTech

journal_title

AAPS PharmSciTech

authors

Maddineni S,Battu SK,Morott J,Majumdar S,Murthy SN,Repka MA

doi

10.1208/s12249-014-0226-4

subject

Has Abstract

pub_date

2015-04-01 00:00:00

pages

444-54

issue

2

issn

1530-9932

journal_volume

16

pub_type

杂志文章
  • Measurement of fluid viscosity at microliter volumes using quartz impedance analysis.

    abstract::The purpose of this work was to measure viscosity of fluids at low microliter volumes by means of quartz crystal impedance analysis. To achieve this, a novel setup was designed that allowed for measurement of viscosity at volumes of 8 to 10 microL. The technique was based on the principle of electromechanical coupling...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/pt050347

    authors: Saluja A,Kalonia DS

    更新日期:2004-08-05 00:00:00

  • Delivery Systems as Vital Tools in Drug Repurposing.

    abstract::The process of developing an old drug for new indications is now a widely accepted strategy of shortening drug development time, reducing drug costs, and improving drug availability, especially for rare and neglected diseases. In this mini-review, we highlighted the impact of drug delivery systems in the fulfillment o...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章,评审

    doi:10.1208/s12249-019-1333-z

    authors: Czech T,Lalani R,Oyewumi MO

    更新日期:2019-02-15 00:00:00

  • Artemisia arborescens L essential oil-loaded solid lipid nanoparticles for potential agricultural application: preparation and characterization.

    abstract::The aim of this study was to formulate a new delivery system for ecological pesticides by the incorporation of Artemisia arborescens L essential oil into solid lipid nanoparticles (SLN). Two different SLN formulations were prepared following the high-pressure homogenization technique using Compritol 888 ATO as lipid a...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/pt070102

    authors: Lai F,Wissing SA,Müller RH,Fadda AM

    更新日期:2006-01-03 00:00:00

  • Effect of hydrophilic polymers on buccoadhesive Eudragit patches of propranolol hydrochloride using factorial design.

    abstract::The purpose of this study was to develop formulations and systematically evaluate in vitro performances of buccoadhesive patches of propranolol hydrochloride using the hydrophobic polymer Eudragit L-100 as the base matrix. The hydrophilic polymers Carbopol 934 and polyvinyl pyrrolidone (PVP) K30 were incorporated into...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/pt0802045

    authors: Patel VM,Prajapati BG,Patel MM

    更新日期:2007-06-22 00:00:00

  • Functional assessment of four types of disintegrants and their effect on the spironolactone release properties.

    abstract::Spironolactone is a drug derived from sterols that exhibits an incomplete oral absorption due to its low water solubility and slow dissolution rate. In this study, formulations of spironolactone with four disintegrants named as croscarmellose sodium, crospovidone, sodium starch glycolate and microcrystalline cellulose...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-012-9835-y

    authors: Rojas J,Guisao S,Ruge V

    更新日期:2012-12-01 00:00:00

  • Proliposome Powders for the Generation of Liposomes: the Influence of Carbohydrate Carrier and Separation Conditions on Crystallinity and Entrapment of a Model Antiasthma Steroid.

    abstract::Formulation effects on the entrapment of beclometasone dipropionate (BDP) in liposomes generated by hydration of proliposomes were studied, using the high-density dispersion medium deuterium oxide in comparison to deionized water (DW). Proliposomes incorporating BDP (2 mol% of the lipid phase consisting of soya phosph...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-017-0793-2

    authors: Khan I,Yousaf S,Subramanian S,Alhnan MA,Ahmed W,Elhissi A

    更新日期:2018-01-01 00:00:00

  • Mathematical modeling of an aqueous film coating process in a Bohle Lab-Coater: part 2: application of the model.

    abstract::For the prediction of the air and product temperatures, the product moisture, and the air humidity during a coating process in a Bohle Lab-Coater, a model was developed. The purpose of this work was to determine the limit moisture, the critical moisture, and the constant for the exchange rate between both zones and to...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/pt070243

    authors: Page S,Baumann KH,Kleinebudde P

    更新日期:2006-05-05 00:00:00

  • Intestinal Targeting of Ganciclovir Release Employing a Novel HEC-PAA Blended Lyomatrix.

    abstract::A hydroxyethylcellulose-poly(acrylic acid) (HEC-PAA) lyomatrix was developed for ganciclovir (GCV) intestine targeting to overcome its undesirable degradation in the stomach. GCV was encapsulated within the HEC-PAA lyomatrix prepared by lyophilization. Conventional tablets were also prepared with identical GCV concent...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-015-0442-6

    authors: Mabrouk M,Mulla JA,Kumar P,Chejara DR,Badhe RV,Choonara YE,du Toit LC,Pillay V

    更新日期:2016-10-01 00:00:00

  • Exploring Microstructural Changes in Structural Analogues of Ibuprofen-Hosted In Situ Gelling System and Its Influence on Pharmaceutical Performance.

    abstract::The present work explores inner structuration of in situ gelling system consisting of glyceryl monooleate (GMO) and oleic acid (OA). The system under study involves investigation of microstructural changes which are believed to govern the pharmaceutical performance of final formulation. The changes which are often ter...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-015-0308-y

    authors: Patil SS,Venugopal E,Bhat S,Mahadik KR,Paradkar AR

    更新日期:2015-10-01 00:00:00

  • The Localization of Phenolic Compounds in Liposomal Bilayers and Their Effects on Surface Characteristics and Colloidal Stability.

    abstract::The interactions with and effects of five chemically distinct, bioactive phenolic compounds on the lipid bilayers of model dipalmitoylphosphatidylcholine (DPPC) liposomes were investigated. Complementary analytical techniques, including differential scanning calorimetry (DSC) and phosphorus and proton nuclear magnetic...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-016-0483-5

    authors: Malekar SA,Sarode AL,Bach AC 2nd,Worthen DR

    更新日期:2016-12-01 00:00:00

  • Triamterene-beta-cyclodextrin systems: preparation, characterization and in vivo evaluation.

    abstract::The purpose of this research was to improve the solubility and therefore dissolution and bioavailability of triamterene, a poorly water soluble diuretic, by complexation with beta-cyclodextrin. Triamterene has been reported to show low bioavailability after oral administration, with wide intersubject variation. This s...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/pt050119

    authors: Mukne AP,Nagarsenker MS

    更新日期:2004-03-29 00:00:00

  • Chronological Delivery of Antihypertensive Drugs in Bilayered Core-in-Cup Buccoadhesive Tablets: In Vitro and In Vivo Evaluation.

    abstract::Hypertension shows circadian blood pressure rhythms (day-night pattern) that urge the delivery of antihypertensive drugs at the right time in the desired levels. Thus, a bilayered core-in-cup buccoadhesive tablet was formulated that immediately releases olmesartan, to give a burst effect, and controls azelnidipine rel...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-019-1575-9

    authors: Rashad AA,Nageeb El-Helaly S,Abd El Rehim RT,El-Gazayerly ON

    更新日期:2019-12-10 00:00:00

  • In situ forming formulation: development, evaluation, and optimization using 3(3) factorial design.

    abstract::The present investigation concerns with the development and optimization of an in situ forming formulation using 3(3) full factorial design experimentation. Metformin, an antidiabetic drug with upper part of gastrointestinal tract as absorption window was used as a model drug. The formulations were designed with an ob...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-009-9285-3

    authors: Nagarwal RC,Srinatha A,Pandit JK

    更新日期:2009-01-01 00:00:00

  • Development and application of a process window for achieving high-quality coating in a fluidized bed coating process.

    abstract::Next to the coating formulation, process conditions play important roles in determining coating quality. This study aims to develop an operational window that separates layering from agglomeration regimes and, furthermore, the one that leads to the best coating quality in a fluidized bed coater. The bed relative humid...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-009-9250-1

    authors: Laksmana FL,Hartman Kok PJ,Vromans H,Frijlink HW,Van der Voort Maarschalk K

    更新日期:2009-01-01 00:00:00

  • Evaluation of functional stability of quercetin as a raw material and in different topical formulations by its antilipoperoxidative activity.

    abstract::The present study evaluates the antioxidant activity of the flavonol quercetin, and its functional stability as a raw material and when added in formulations. The iron-chelating activity was determined using the bathophenanthroline assay, and the functional stability was evaluated with the antilipoperoxidative assay. ...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/pt070110

    authors: Casagrande R,Georgetti SR,Verri WA Jr,Jabor JR,Santos AC,Fonseca MJ

    更新日期:2006-02-03 00:00:00

  • Formulation Optimization and Ex Vivo and In Vivo Evaluation of Celecoxib Microemulsion-Based Gel for Transdermal Delivery.

    abstract::Celecoxib (CXB) is a poorly aqueous solubility sulfonamide non-steroidal anti-inflammatory drug (NSAID). Hence, the formulation of CXB was selected for solubilization and bioavailability. To find out suitable formulation for microemulsion, the solubility of CXB in triacetin (oil phase), Tween 80 (surfactant), and Tran...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-016-0667-z

    authors: Cao M,Ren L,Chen G

    更新日期:2017-08-01 00:00:00

  • Bimatoprost Imprinted Silicone Contact Lens to Treat Glaucoma.

    abstract::Bimatoprost is widely used for the management of glaucoma. Currently, it is delivered via eye drop solution, which is highly inefficient due to low bioavailability. To control the release of ocular drugs, contact lenses are used by scientists. However, the conventional soaking method showed high burst release due to a...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-020-1622-6

    authors: Yan F,Liu Y,Han S,Zhao Q,Liu N

    更新日期:2020-01-13 00:00:00

  • In vitro dissolution of generic immediate-release solid oral dosage forms containing BCS class I drugs: comparative assessment of metronidazole, zidovudine, and amoxicillin versus relevant comparator pharmaceutical products in South Africa and India.

    abstract::Biowaivers are recommended for immediate-release solid oral dosage forms using dissolution testing as a surrogate for in vivo bioequivalence studies. Several guidance are currently available (the World Health Organization (WHO), the US FDA, and the EMEA) where the conditions are described. In this study, definitions, ...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-014-0135-6

    authors: Reddy NH,Patnala S,Löbenberg R,Kanfer I

    更新日期:2014-10-01 00:00:00

  • Development and evaluation of buccal bioadhesive tablet of an anti-emetic agent ondansetron.

    abstract::The aim of the present study was to develop and evaluate a buccal adhesive tablet containing ondansetron hydrochloride (OH). Special punches and dies were fabricated and used while preparing buccal adhesive tablets. The tablets were prepared using carbopol (CP 934), sodium alginate, sodium carboxymethylcellulose low v...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-009-9304-4

    authors: Hassan N,Khar RK,Ali M,Ali J

    更新日期:2009-01-01 00:00:00

  • Advanced technologies for oral controlled release: cyclodextrins for oral controlled release.

    abstract::Cyclodextrins (CDs) are used in oral pharmaceutical formulations, by means of inclusion complexes formation, with the following advantages for the drugs: (1) solubility, dissolution rate, stability, and bioavailability enhancement; (2) to modify the drug release site and/or time profile; and (3) to reduce or prevent g...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章,评审

    doi:10.1208/s12249-011-9690-2

    authors: Salústio PJ,Pontes P,Conduto C,Sanches I,Carvalho C,Arrais J,Marques HM

    更新日期:2011-12-01 00:00:00

  • The effect of polysorbate 20 on solubility and stability of candesartan cilexetil in dissolution media.

    abstract::The addition of polysorbate 20 (T20) is required to achieve "sink" conditions during a dissolution test for tablets with candesartan cilexetil (CC). Polysorbate 20 (0.35%-0.7% w/w) added to 0.05 mol/L of phosphate buffer pH 6.5 dramatically increased the apparent solubility of the drug from 0.8 μg/ml even to 353 μg/ml...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-014-0109-8

    authors: Hoppe K,Sznitowska M

    更新日期:2014-10-01 00:00:00

  • Comparison between gamma and beta irradiation effects on hydroxypropylmethylcellulose and gelatin hard capsules.

    abstract::The effects of electron beam or gamma-irradiation on technological performances (capsule hardness, expressed as deforming work and dissolution time) of empty 2-shell capsules made of gelatin or hydroxypropylmethylcellulose (HPMC) were studied. Capsule structural changes induced by radiation treatment were investigated...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/pt060473

    authors: Cilurzo F,Selmin F,Minghetti P,Montanari L,Lenardi C,Orsini F,Poletti G

    更新日期:2005-12-01 00:00:00

  • Formulation and optimization of nonionic surfactants emulsified nimesulide-loaded PLGA-based nanoparticles by design of experiments.

    abstract::This investigation aimed to develop nimesulide (NMS)-loaded poly(lactic-co-glycolic acid) (PLGA)-based nanoparticulate formulations as a biodegradable polymeric drug carrier to treat rheumatoid arthritis. Polymeric nanoparticles (NPs) were prepared with two different nonionic surfactants, vitamin E d-α-tocopheryl poly...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-013-0048-9

    authors: Turk CT,Oz UC,Serim TM,Hascicek C

    更新日期:2014-02-01 00:00:00

  • Development and Evaluation of Astaxanthin as Nanostructure Lipid Carriers in Topical Delivery.

    abstract::The study is designed to formulate, optimize, and evaluate astaxanthin (ASTA)-loaded nanostructured lipid carrier (NLC) with an aim to improve its stability, water solubility, skin permeability and retention and reduce drug-related side effects. ASTA was extracted from Haematococcus pluvialis. ASTA-NLC was formulated ...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-020-01822-w

    authors: Geng Q,Zhao Y,Wang L,Xu L,Chen X,Han J

    更新日期:2020-11-11 00:00:00

  • A novel method for analyzing thick tablets by near infrared spectroscopy.

    abstract::A near-infrared (NIR) spectroscopic method to determine content uniformity of a large, thick tablet using an approach that could facilitate future validations has been developed. A CT ibuprofen 800-mg tablet weighs about 1150 mg and is about 18.6 mm wide and 7.6 mm thick. The FT NIR spectrometer was optimized for tran...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/pt020311

    authors: Ramirez JL,Bellamy MK,Romañac RJ

    更新日期:2001-07-12 00:00:00

  • Effect of Carbopol and polyvinylpyrrolidone on the mechanical, rheological, and release properties of bioadhesive polyethylene glycol gels.

    abstract::This study examined the mechanical (hardness, compressibility, adhesiveness, and cohesiveness) and rheological (zero-rate viscosity and thixotropy) properties of polyethylene glycol (PEG) gels that contain different ratios of Carbopol 934P (CP) and polyvinylpyrrolidone K90 (PVP). Mechanical properties were examined us...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/pt010324

    authors: Tan YT,Peh KK,Al-Hanbali O

    更新日期:2000-08-17 00:00:00

  • Nanosuspension-Based Aloe vera Gel of Silver Sulfadiazine with Improved Wound Healing Activity.

    abstract::The present study focuses on the development and characterization of nanosuspension of a poorly soluble drug, silver sulfadiazine (SSD) incorporated in Aloe vera gel (AV-gel) for improving its therapeutic efficacy. The SSD solution in ammonia was subjected to nanoprecipitation in surfactant solution and particle size ...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-017-0817-y

    authors: Barkat MA,Harshita,Ahmad I,Ali R,Singh SP,Pottoo FH,Beg S,Ahmad FJ

    更新日期:2017-11-01 00:00:00

  • Improved Vemurafenib Dissolution and Pharmacokinetics as an Amorphous Solid Dispersion Produced by KinetiSol® Processing.

    abstract::Vemurafenib is a poorly soluble, low permeability drug that has a demonstrated need for a solubility-enhanced formulation. However, conventional approaches for amorphous solid dispersion production are challenging due to the physiochemical properties of the compound. A suitable and novel method for creating an amorpho...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-018-0988-1

    authors: Ellenberger DJ,Miller DA,Kucera SU,Williams RO 3rd

    更新日期:2018-07-01 00:00:00

  • Improved Oral Pharmacokinetics of Pentoxifylline with Palm Oil and Capmul® MCM Containing Self-Nano-Emulsifying Drug Delivery System.

    abstract::Pentoxifylline (PTX), an anti-hemorrhage drug used in the treatment of intermittent claudication, is extensively metabolized by the liver resulting in a reduction of the therapeutic levels within a short duration of time. Self-nano-emulsifying drug delivery system (SNEDDS) is well reported to enhance the bio-absorptio...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-020-01644-w

    authors: Shailendrakumar AM,Ghate VM,Kinra M,Lewis SA

    更新日期:2020-04-21 00:00:00

  • Novel biodegradable polyester poly(propylene succinate): synthesis and application in the preparation of solid dispersions and nanoparticles of a water-soluble drug.

    abstract::Poly(propylene succinate) (PPSu) polymers of average molecular weights from 2,800 to 13,100 g/mol were synthesized and characterized with regard to crystallinity, thermal properties, and cytocompatibility. Higher molecular weight samples exhibited lower degree of crystallinity and melted at lower temperatures. Melting...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-008-9184-z

    authors: Bikiaris DN,Papageorgiou GZ,Papadimitriou SA,Karavas E,Avgoustakis K

    更新日期:2009-01-01 00:00:00