Abstract:
:Nanoparticles, of the poorly water-soluble drug, itraconazole (ITZ), were produced by the Advanced Evaporative Precipitation into Aqueous Solution process (Advanced EPAS). This process combines emulsion templating and EPAS processing to provide improved control over the size distribution of precipitated particles. Specifically, oil-in-water emulsions containing the drug and suitable stabilizers are sprayed into a heated aqueous solution to induce precipitation of the drug in form of nanoparticles. The influence of processing parameters (temperature and volume of the heated aqueous solution; type of nozzle) and formulation aspects (stabilizer concentrations; total solid concentrations) on the size of suspended ITZ particles, as determined by laser diffraction, was investigated. Furthermore, freeze-dried ITZ nanoparticles were evaluated regarding their morphology, crystallinity, redispersibility, and dissolution behavior. Results indicate that a robust precipitation process was developed such that size distribution of dispersed nanoparticles was shown to be largely independent across the different processing and formulation parameters. Freeze-drying of colloidal dispersions resulted in micron-sized agglomerates composed of spherical, sub-300-nm particles characterized by reduced crystallinity and high ITZ potencies of up to 94% (w/w). The use of sucrose prevented particle agglomeration and resulted in powders that were readily reconstituted and reached high and sustained supersaturation levels upon dissolution in aqueous media.
journal_name
AAPS PharmSciTechjournal_title
AAPS PharmSciTechauthors
Bosselmann S,Nagao M,Chow KT,Williams RO 3rddoi
10.1208/s12249-012-9817-0subject
Has Abstractpub_date
2012-09-01 00:00:00pages
949-60issue
3issn
1530-9932journal_volume
13pub_type
杂志文章abstract::Incorporation of drug-loaded nanoparticles into swellable and respirable microparticles is a promising strategy to avoid rapid clearance from the lung and achieve sustained drug release. In this investigation, a copolymer of polyethylene glycol grafted onto phthaloyl chitosan (PEG-g-PHCs) was synthesized and then self...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-014-0176-x
更新日期:2014-12-01 00:00:00
abstract::In order to obtain sustained release of biodegradable microspheres, the purpose of this study was to design and characterize an injectable octreotide microsphere-gel composite system. The octreotide microspheres were prepared by phase separation method, which used PLGA as a carrier material, dimethyl silicone oil as a...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-019-1438-4
更新日期:2019-06-21 00:00:00
abstract::Rheumatoid arthritis is an autoimmune disease that leads to cartilage destruction, synovial joint inflammation, and bacterial joint/bone infections. In the present work, methotrexate and minocycline-loaded nanoparticles (MMNPs) were developed with an aim to provide relief from inflammation and disease progression/join...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-019-1581-y
更新日期:2019-12-23 00:00:00
abstract::Hydrogen sulfide (H2S) is having many potential pharmacological and physiological actions which reported that therapeutically useful concentration is low (100-160 μM) and a higher concentration could be toxic. Most of its donors produce it on coming into contact with water. All of these problems could be solved by a c...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-014-0117-8
更新日期:2014-08-01 00:00:00
abstract::The effects of solvent [acetonitrile, methanol, and acetonitrile/water mixture (20:80, v/v)], buffer concentration (phosphate buffer, pH 7.5), ionic strength and commonly employed adjuvants on the photodegradation of betamethasone-17 valerate in cream and gel formulations have been studied on exposure to UV light (300...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-012-9902-4
更新日期:2013-03-01 00:00:00
abstract::The purpose of this research was to improve the solubility and therefore dissolution and bioavailability of triamterene, a poorly water soluble diuretic, by complexation with beta-cyclodextrin. Triamterene has been reported to show low bioavailability after oral administration, with wide intersubject variation. This s...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/pt050119
更新日期:2004-03-29 00:00:00
abstract::Liposome-encapsulated polyplex system represents a promising delivery system for oligonucleotide-based therapeutics such as siRNA and asODN. Here, we report a novel method to prepare liposome-encapsulated cationic polymer/oligonucleotide polyplexes based on the reverse-phase evaporation following organic extraction of...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-012-9757-8
更新日期:2012-06-01 00:00:00
abstract::The current study explains the development of sorbitan monostearate and sesame oil-based organogels for topical drug delivery. The organogels were prepared by dissolving sorbitan monostearate in sesame oil (70°C). Metronidazole was used as a model antimicrobial. The formulations were characterized using phase contrast...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-014-0223-7
更新日期:2015-04-01 00:00:00
abstract::Multidrug resistance is the major problem in cancer treatment nowadays. Compounds from plants are the new targets to solve this problem. Quercetin (QCT), quercetrin (QTR), and rutin (RUT) are potential anticancer flavonoids but their poor water solubility leads to less efficacy. In this study, the polymeric micelles o...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-020-01657-5
更新日期:2020-04-26 00:00:00
abstract::Our objective was to prepare nanoparticulate system using a simple yet attractive innovated method as an ophthalmic delivery system for fluocinolone acetonide to improve its ocular bioavailability. Poly(lactic-co-glycolic acid) (PLGA) nanoparticles were prepared by adopting thin film hydration method using PLGA/poloxa...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章,随机对照试验
doi:10.1208/s12249-015-0448-0
更新日期:2016-10-01 00:00:00
abstract::The present study introduces a new three-dimensional (3D) surface image analysis technique in which white light illumination from different incident angles is used to create 3D surfaces with a photometric approach. The three-dimensional features of the surface images created are then used in the characterization of pa...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-011-9607-0
更新日期:2011-06-01 00:00:00
abstract::A number of synthesized chemical molecules suffer from low aqueous solubility problems. Enhancement of aqueous solubility, dissolution rate, and bioavailability of drug is a very challenging task in drug development. In the present study, solubility and dissolution of poorly aqueous soluble drug simvastatin (SIM) was ...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-008-9176-z
更新日期:2008-01-01 00:00:00
abstract::The purpose of this article is to report final results of the evaluation of a chi-square ratio test proposed by the US Food and Drug Administration (FDA) for demonstrating equivalence of aerodynamic particle size distribution (APSD) profiles of nasal and orally inhaled drug products. A working group of the Product Qua...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/pt0804090
更新日期:2007-11-02 00:00:00
abstract::The objective of the present investigation was to reduce the bitterness with improved dissolution, in acidic medium (pH 1.2), of mefloquine hydrochloride (MFL). Microparticles were prepared by coacervation method using Eudragit E (EE) as polymer and sodium hydroxide as precipitant. A 3(2) full factorial design was use...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-008-9052-x
更新日期:2008-01-01 00:00:00
abstract::The purpose of this research was to prepare and evaluate sustained release mucoadhesive tablets of Itraconazole. It is practically insoluble in aqueous fluids hence its solid dispersion with Eudragit E100 was prepared by spray drying. This was formulated in matrix of hydrophilic mucoadhesive polymers Carbopol 934P (CP...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-008-9119-8
更新日期:2008-01-01 00:00:00
abstract::The effect of storage condition (% RH) on flufenamic acid:nicotinamide (FFA:NIC) cocrystal compressibility, compactibility, and tabletability profiles was not observed after visual evaluation or linear regression analysis. However, multivariate statistical analysis showed that storage condition had a significant effec...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-020-01712-1
更新日期:2020-07-07 00:00:00
abstract::The aim of this study was to apply quality by design (QbD) for pharmaceutical development of felodipine solid mixture (FSM) containing hydrophilic carriers and/or polymeric surfactants, for easier development of controlled-release tablets of felodipine. The material attributes, the process parameters (CPP), and the cr...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-011-9646-6
更新日期:2011-09-01 00:00:00
abstract::The aim of this study was to prepare bi-layer tablet of Metoclopramide Hydrochloride (MTH) and Ibuprofen (IB) for the effective treatment of migraine. MTH and IB were formulated as immediate and sustained release layer respectively. MTH was formulated as immediate release layer by using various disintegrants like Ac-D...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-008-9116-y
更新日期:2008-01-01 00:00:00
abstract::Children frequently receive medicines that are designed for adults. The dose of commercially available products is adapted, mostly based on the child's bodyweight, thereby neglecting differences in pharmacokinetic and pharmacodynamics parameters. If commercial products are unsuitable for administration to children or ...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章,评审
doi:10.1208/s12249-016-0515-1
更新日期:2017-02-01 00:00:00
abstract::The utilization of ferrets as a non-clinical model for disease is rapidly increasing within drug development. Many of these models include respiratory diseases that involve targeted drug delivery via nose-only inhalation. While the deposition patterns within other non-clinical models (mice, rats, canines, and non-huma...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-019-1382-3
更新日期:2019-07-01 00:00:00
abstract::The purpose of this study was to investigate physicochemical characteristics and in vitro release of zidovudine from monolithic film of Eudragit RL 100 and ethyl cellulose. Films included 2.5% or 5% (w/w) zidovudine of the dry polymer weight were prepared in various ratios of polymers by solvent evaporation method fro...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-008-9179-9
更新日期:2009-01-01 00:00:00
abstract::The purpose of this research was to design and develop hydrogels by esterification of polyvinyl alcohol (PVA) with gelatin. The membranes were characterized by Fourier Transform Infrared (FTIR) spectroscopy, x-ray diffraction (XRD), and differential scanning calorimetry. The viscosity of the esterified product (as sol...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/pt080121
更新日期:2007-03-16 00:00:00
abstract::The aim of this study was to investigate the influence of experimental conditions on levothyroxine sodium release from two immediate-release tablet formulations which narrowly passed the standard requirements for bioequivalence studies. The in vivo study was conducted as randomised, single-dose, two-way cross-over pha...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-011-9660-8
更新日期:2011-09-01 00:00:00
abstract::The objective of this study was to develop an efficient tumor vasculature targeted liposome delivery system for combretastatin A4, a novel antivascular agent. Liposomes composed of hydrogenated soybean phosphatidylcholine (HSPC), cholesterol, distearoyl phosphoethanolamine-polyethylene-glycol-2000 conjugate (DSPE-PEG)...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/pt070232
更新日期:2006-04-07 00:00:00
abstract::Pellet manufacturing by extrusion/spheronization is quite common in the pharmaceutical field because the obtained product is characterized by a high sphericity as well as a narrow particle size distribution. The established mechanisms only consider deformation of the initially fractured particles but do not account fo...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-010-9532-7
更新日期:2010-12-01 00:00:00
abstract::A simple but novel mixed surfactant system was designed to fabricate a self-nanoemulsifying drug delivery system (SNEDDS) based on hydrophilic-lipophilic balance (HLB) value. The impacts of HLB and molecular structure of surfactants on the formation of SNEDDS were investigated. After screening various oils and surfact...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-014-0078-y
更新日期:2014-04-01 00:00:00
abstract::Nucleic acid-based therapeutics present huge potential in the treatment of pulmonary diseases ranging from lung cancer to asthma and chronic pulmonary diseases, which are often fatal and widely prevalent. The susceptibility of nucleic acids to degradation and the complex structure of lungs retard the effective pulmona...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章,评审
doi:10.1208/s12249-018-1183-0
更新日期:2018-11-01 00:00:00
abstract::The purpose of this research was to evaluate a novel fiber-optic photometer for its ability to monitor physical instabilities occurring in concentrated emulsions during storage. For this, the fiber-optic photometer was used to measure transmission of oil-in-water emulsions stabilized with hypromellose (HPMC) as a func...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/pt0803070
更新日期:2007-08-31 00:00:00
abstract::The objective of this work was the preparation of osmotic tablets using polymer blends of cellulose acetate butyrate (CAB) or ethylcellulose with ammonio methacrylate copolymer (Eudragit® RL). The advantage of these coatings in comparison to the traditionally used cellulose acetate is their solubility in safer organic...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章
doi:10.1208/s12249-017-0825-y
更新日期:2018-01-01 00:00:00
abstract::The impact of pharmaceutical materials properties on drug product quality and manufacturability is well recognised by the industry. An ongoing effort across industry and academia, the Manufacturing Classification System consortium, aims to gather the existing body of knowledge in a common framework to provide guidance...
journal_title:AAPS PharmSciTech
pub_type: 杂志文章,评审
doi:10.1208/s12249-018-1198-6
更新日期:2018-11-01 00:00:00