当前位置： SCI文献检索 > Journal of the Mechanical Behavior of Biomedical Materials期刊下所有文献 > Biocompatibility and compressive properties of Ti-6Al-4V scaffolds having Mg element.

Biocompatibility and compressive properties of Ti-6Al-4V scaffolds having Mg element.

Abstract：

:Porous scaffolds of Ti-6Al-4V were produced by mixing of this alloy with different amount of magnesium (Mg) powders. The mixtures were compacted in steel die by applying uniaxial pressure of 500 MPa before sintering the compacts in sealed quartz tubes at 900 °C for 2 h. Employing Archimedes׳ principle and Image Tool software, the total and open volume percentages of porosities within the scaffolds were found to be in the range of 47-64% and 41-47%, respectively. XRD results of titanium before and after sintering showed that no contamination, neither oxides nor nitrides formed during processes. Compressive properties of the scaffolds were studied using an Instron machine. The observed compressive strength and Young׳s module of the scaffolds were in the range of 72-132 MPa, and 37-47 GPa, respectively. Cell attachment and proliferation rate of MG-63 on porous samples were investigated. The results showed that proliferation rate increased with increasing Mg content. However no clear differences were observed between samples regarding cell attachment, so that bridges were observed in all cell gaps within the scaffolds.

journal_name

J Mech Behav Biomed Mater

journal_title

Journal of the mechanical behavior of biomedical materials

authors

Kalantari SM,Arabi H,Mirdamadi S,Mirsalehi SA

doi

10.1016/j.jmbbm.2015.04.015

subject

Has Abstract

pub_date

2015-08-01 00:00:00

pages

183-191

eissn

1751-6161

issn

1878-0180

pii

S1751-6161(15)00135-6

journal_volume

48

pub_type

杂志文章

相关文献

Journal of the Mechanical Behavior of Biomedical Materials文献大全
  • Mechanical characterization and validation of poly (methyl methacrylate)/multi walled carbon nanotube composite for the polycentric knee joint.

    abstract：:Trans femoral amputation is one of the most uncomfortable surgeries in patient׳s life, where the prosthesis consisting of a socket, knee joint, pylon and foot is used to do the walking activities. The artificial prosthetic knee joint imitates the functions of human knee to achieve the flexion-extension for the above k...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2015.06.002

    authors： Arun S,Kanagaraj S

    更新日期：2015-10-01 00:00:00

  • On the observation of lubrication mechanisms within hip joint replacements. Part I: Hard-on-soft bearing pairs.

    abstract：:The present study describes the lubrication mechanisms within artificial hip joints considering real conformity of rubbing surfaces. Part I is focused on hard-on-soft material combination, introducing the fundamentals of lubrication performance. These pairs have not been explored in terms of in situ observation before...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2018.09.022

    authors： Nečas D,Vrbka M,Galandáková A,Křupka I,Hartl M

    更新日期：2019-01-01 00:00:00

  • Effects of fibrin sealant and bone fragments on defect regeneration performed on rat tibiae: An experimental study.

    abstract：:Fibrin sealant (FS) is a biomaterial that exhibits hemostatic and repairing properties. It has been successfully used as scaffolds and adhesives to improve repair and regeneration of tissues. The objective of this study was to evaluate the effect of FS in the regeneration process of bone defects in male rat tibias thr...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2020.103662

    authors： de Oliveira CTB,Leonel BC,de Oliveira AC,de Brito Paiva M,Ramos J,Barraviera B,Ferreira Junior RS,Shimano AC

    更新日期：2020-04-01 00:00:00

  • Elastic moduli of electrospun mats: Importance of fiber curvature and specimen dimensions.

    abstract：:Success of tissue engineering relies on the architecture and properties of porous scaffolds. Electrospun nonwoven scaffolds in the form of mats are unique materials due to large surface area to volume ratio, high porosity, versatility in surface functionalities and excellent mechanical properties. Maneuvering the mech...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2017.04.013

    authors： Kumar V,Rawal A

    更新日期：2017-08-01 00:00:00

  • Effect of fluorine substitution on sintering behaviour, mechanical and bioactivity of hydroxyapatite.

    abstract：:Fluorine substituted hydroxyapatite (FAp) with different degree of fluorine (F) substitution, has been synthesized using hydrothermal synthesis method. In the present work, as synthesized powders were consolidated by sintering at 1200 °C in air for 1 h. The sintered specimens were characterized using Fourier transform...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2019.03.032

    authors： Nasker P,Samanta A,Rudra S,Sinha A,Mukhopadhyay AK,Das M

    更新日期：2019-07-01 00:00:00

  • Role of porosity and matrix behavior on compressive fracture of Haversian bone using random spring network model.

    abstract：:Haversian remodeling is known to result in improved resistance to compressive fracture in healthy cortical bone. Here, we examine the individual roles of the mean porosity, structure of the network of pores and remodeled bone matrix properties in the fracture behavior of Haversian bone. The detailed structure of poros...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2018.04.013

    authors： Mayya A,Banerjee A,Rajesh R

    更新日期：2018-07-01 00:00:00

  • Calibration of colloidal probes with atomic force microscopy for micromechanical assessment.

    abstract：:Mechanical assessment of biological materials and tissue-engineered scaffolds is increasingly focusing at lower length scale levels. Amongst other techniques, atomic force microscopy (AFM) has gained popularity as an instrument to interrogate material properties, such as the indentation modulus, at the microscale via ...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2018.05.026

    authors： Kain L,Andriotis OG,Gruber P,Frank M,Markovic M,Grech D,Nedelkovski V,Stolz M,Ovsianikov A,Thurner PJ

    更新日期：2018-09-01 00:00:00

  • Mechanical performance, corrosion and tribological evaluation of a Co-Cr-Mo alloy processed by MIM for biomedical applications.

    abstract：:In this study, the processing parameters mechanical performance, corrosion and tribological evaluation of a low carbon content Co-Cr-Mo alloy are discussed. The production of parts using the Metal Injection Moulding (MIM) process is optimized, specifically concerning the rheological analysis of the prepared feedstocks...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2020.103706

    authors： Herranz G,Berges C,Naranjo JA,García C,Garrido I

    更新日期：2020-05-01 00:00:00

  • Microstructure and mechanical properties of open-cellular biomaterials prototypes for total knee replacement implants fabricated by electron beam melting.

    abstract：:Total knee replacement implants consisting of a Co-29Cr-6Mo alloy femoral component and a Ti-6Al-4V tibial component are the basis for the additive manufacturing of novel solid, mesh, and foam monoliths using electron beam melting (EBM). Ti-6Al-4V solid prototype microstructures were primarily α-phase acicular platele...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2011.05.010

    authors： Murr LE,Amato KN,Li SJ,Tian YX,Cheng XY,Gaytan SM,Martinez E,Shindo PW,Medina F,Wicker RB

    更新日期：2011-10-01 00:00:00

  • Assessing the microstructural response to applied deformation in porcine passive skeletal muscle.

    abstract：:The passive micro-structural mechanical response of muscle tissue is important for numerous medical applications. However, the recently observed tension/compression asymmetry in porcine muscle remains poorly explained. In particular there remains a lack of understanding of how external tension or compression applied i...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2014.08.019

    authors： Takaza M,Cooney GM,McManus G,Stafford P,Simms CK

    更新日期：2014-12-01 00:00:00

  • Osteogenesis enhancement of silk fibroin/ α-TCP cement by N-acetyl cysteine through Wnt/β-catenin signaling pathway in vivo and vitro.

    abstract：:High brittleness and lack osteogenesis are two major limitations of calcium phosphate cement (CPC) in application in bone defect reconstruction. Here we prepared a composite calcium phosphate cement by mixing N-acetyl cysteine loaded silk fibroin solution with α-tricalcium phosphate. In vitro cytology experiment revea...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2019.103451

    authors： Feng T,Niu J,Pi B,Lu Y,Wang J,Zhang W,Li B,Yang H,Zhu X

    更新日期：2020-01-01 00:00:00

  • Effects of age and loading rate on equine cortical bone failure.

    abstract：:Although clinical bone fractures occur predominantly under impact loading (as occurs during sporting accidents, falls, high-speed impacts or other catastrophic events), experimentally validated studies on the dynamic fracture behavior of bone, at the loading rates associated with such events, remain limited. In this s...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2010.09.006

    authors： Kulin RM,Jiang F,Vecchio KS

    更新日期：2011-01-01 00:00:00

  • A method to develop mock arteries suitable for cell seeding and in-vitro cell culture experiments.

    abstract：:Sylgard((R)) is a biocompatible elastomer which has been widely used in biomedical applications including in simulations of the mechanical response of soft tissues and mechanotransduction investigations. In this study the effect of fabrication parameters including base to curing agent ratio and curing time on the mech...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2010.04.003

    authors： Colombo A,Zahedmanesh H,Toner DM,Cahill PA,Lally C

    更新日期：2010-08-01 00:00:00

  • Computational Modeling of Mouse Colorectum Capturing Longitudinal and Through-thickness Biomechanical Heterogeneity.

    abstract：:Mechanotransduction, the encoding of local mechanical stresses and strains at sensory endings into neural action potentials at the viscera, plays a critical role in evoking visceral pain, e.g., in the distal colon and rectum (colorectum). The wall of the colorectum is structurally heterogeneous, including two major co...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2020.104127

    authors： Zhao Y,Siri S,Feng B,Pierce DM

    更新日期：2021-01-01 00:00:00

  • Structural analysis of rat bone explants kept in vitro in simulated microgravity conditions.

    abstract：:Skeletal abnormalities reported in humans and laboratory animals after spaceflight, include cancellous osteopenia, decreased cortical and cancellous bone formation, aberrant matrix ultrastructure, decreased mineralization and reduced bone strength. Although considerable effort has been made up to now to understand the...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2008.06.004

    authors： Cosmi F,Steimberg N,Dreossi D,Mazzoleni G

    更新日期：2009-04-01 00:00:00

  • Bending behaviors of fully covered biodegradable polydioxanone biliary stent for human body by finite element method.

    abstract：:This paper presents a study of the bending flexibility of fully covered biodegradable polydioxanone biliary stents (FCBPBs) developed for human body. To investigate the relationship between the bending load and structure parameter (monofilament diameter and braid-pin number), biodegradable polydioxanone biliary stents...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2017.08.023

    authors： Liu Y,Zhu G,Yang H,Wang C,Zhang P,Han G

    更新日期：2018-01-01 00:00:00

  • Processing nanoengineered scaffolds through electrospinning and mineralization suitable for biomimetic bone tissue engineering.

    abstract：:Processing scaffolds that mimic the extracellular matrix (ECM) of natural bone in structure and chemical composition is a potential promising option for engineering physiologically functional bone tissue. In this article, we report a novel method, by combining electrospinning and mineralization, to process a series of...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2008.01.007

    authors： Liao S,Murugan R,Chan CK,Ramakrishna S

    更新日期：2008-07-01 00:00:00

  • Computational micromechanics of bioabsorbable magnesium stents.

    abstract：:Magnesium alloys are a promising candidate material for an emerging generation of absorbable metal stents. Due to its hexagonal-close-packed lattice structure and tendency to undergo twinning, the deformation behaviour of magnesium is quite different to that of conventional stent materials, such as stainless steel 316...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2014.01.007

    authors： Grogan JA,Leen SB,McHugh PE

    更新日期：2014-06-01 00:00:00

  • Prediction of cross section fracture path of cortical bone through nanoindentation array.

    abstract：:Although great progresses in the fracture mechanisms and deformation behaviors of cortical bones have been achieved, the effective methods to predict the surface fracture path of cortical bones are still difficult. By using depth-sensing nanoindentation measurement technique, the hardness distribution map of cortical ...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2020.104303

    authors： Ma Z,Qiang Z,Zeng K,Xiao J,Zhou L,Zu L,Zhao H,Ren L

    更新日期：2021-01-20 00:00:00

  • Graphite nanoplatelets-modified PLA/PCL: Effect of blend ratio and nanofiller localization on structure and properties.

    abstract：:Structure and properties of poly(lactic acid) (PLA)/poly (ɛ-caprolactone) (PCL) influenced by graphite nanoplatelets (GNP) were studied in dependence on blend composition. Electron microscopy indicates predominant localization of GNP in PCL. GNP-induced changes in viscosity hinder refinement of PCL inclusions, support...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2017.03.028

    authors： Kelnar I,Kratochvíl J,Kaprálková L,Zhigunov A,Nevoralová M

    更新日期：2017-07-01 00:00:00

  • Wear characteristics of WSU total ankle replacement devices under shear and torsion loads.

    abstract：BACKGROUND:There are several factors that contribute to the failure of total ankle replacement (TAR). Aseptic loosening is one of the primary mechanisms of failure in TAR. Since a cross-linked ultrahigh molecular weight polyethylene (UHMWPE) is used as liner material, there is a need to quantify and develop methods to ...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2014.12.010

    authors： Gundapaneni D,Tsatalis JT,Laughlin RT,Goswami T

    更新日期：2015-04-01 00:00:00

  • An investigation of the effect of freezing storage on the biaxial mechanical properties of excised porcine tricuspid valve anterior leaflets.

    abstract：:The atrioventricular heart valve (AHV) leaflets are critical to the facilitation of proper unidirectional blood flow through the heart. Previously, studies have been conducted to understand the tissue mechanics of healthy AHV leaflets to inform the development of valve-specific computational models and replacement mat...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2019.103438

    authors： Duginski GA,Ross CJ,Laurence DW,Johns CH,Lee CH

    更新日期：2020-01-01 00:00:00

  • Anatomic variation in the elastic anisotropy of cortical bone tissue in the human femur.

    abstract：:Experimental investigations for anatomic variation in the magnitude and anisotropy of elastic constants in human femoral cortical bone tissue have typically focused on a limited number of convenient sites near the mid-diaphysis. However, the proximal and distal ends of the diaphysis are more clinically relevant to com...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2008.08.005

    authors： Espinoza Orías AA,Deuerling JM,Landrigan MD,Renaud JE,Roeder RK

    更新日期：2009-07-01 00:00:00

  • Mechanical behaviour of pressed and sintered titanium alloys obtained from master alloy addition powders.

    abstract：:The fabrication of the workhorse Ti-6Al-4V alloy and of the Ti-3Al-2.5V alloy was studied considering the master alloy addition variant of the blending elemental approach conventionally used for titanium powder metallurgy. The powders were characterised by means thermal analysis and X-ray diffraction and shaped by mea...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2012.05.019

    authors： Bolzoni L,Esteban PG,Ruiz-Navas EM,Gordo E

    更新日期：2012-11-01 00:00:00

  • Clamping soft biologic tissues for uniaxial tensile testing: A brief survey of current methods and development of a novel clamping mechanism.

    abstract：:Biologic tissues are complex materials that come in many forms and perform a variety of functions. They vary widely in composition and mechanical properties, and determination of the mechanical properties of tissues is of interest to those trying to engineer tissues to restore missing function. In performing experimen...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2019.103503

    authors： Jiang M,Lawson ZT,Erel V,Pervere S,Nan T,Robbins AB,Feed AD,Moreno MR

    更新日期：2020-03-01 00:00:00

  • In-situ synthesis of AgNPs in the natural/synthetic hybrid nanofibrous scaffolds: Fabrication, characterization and antimicrobial activities.

    abstract：:Silver nanoparticles embedded within a nanofibrous polymer matrix have significant attention in recent years as an antimicrobial wound dressing materials. Herein, we have fabricated a novel Ag-polyurethane-zein hybrid nanofibrous scaffold for wound dressing applications. AgNPs were synthesized in-situ via reduction of...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2016.07.034

    authors： Maharjan B,Joshi MK,Tiwari AP,Park CH,Kim CS

    更新日期：2017-01-01 00:00:00

  • Numerical identification method for the non-linear viscoelastic compressible behavior of soft tissue using uniaxial tensile tests and image registration - application to rat lung parenchyma.

    abstract：:This paper presents an improved identification method of the constitutive properties of lung parenchyma. We aim to determine the non-linear viscoelastic behavior of lung parenchyma with a particular focus on the compressible properties - i.e. the ability to change volume. Uniaxial tensile tests are performed on living...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2013.09.018

    authors： Bel-Brunon A,Kehl S,Martin C,Uhlig S,Wall WA

    更新日期：2014-01-01 00:00:00

  • Mechanical properties enhancement of self-cured PMMA reinforced with zirconia and boron nitride nanopowders for high-performance dental materials.

    abstract：:We report on the mechanical properties regarding self-cured acrylic polymethyl methacrylate (PMMA) reinforced with hexagonal boron nitride (h-BN) and stabilized zirconia (8Y ZrO2) nanopowders. The nanocomposites were prepared by using both manual and ultrasonic mixing techniques. The fabricated specimens were subjecte...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2020.103937

    authors： Alqahtani M

    更新日期：2020-10-01 00:00:00

  • Study of indentation of a sample equine bone using finite element simulation and single cycle reference point indentation.

    abstract：:In an attempt to study the mechanical behavior of bone under indentation, methods of analyses and experimental validations have been developed, with a selected test material. The test material chosen is from an equine cortical bone. Stress-strain relationships are first obtained from conventional mechanical property t...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2014.11.020

    authors： Hoffseth K,Randall C,Hansma P,Yang HT

    更新日期：2015-02-01 00:00:00

  • Biomechanical and biochemical protective effect of low-level laser therapy for Achilles tendinitis.

    abstract：:For three decades, low level laser therapy (LLLT) has been used for treatment of tendinitis as well as other musculoskeletal diseases. Nevertheless, the biological mechanisms involved remain not completely understood. In this work, the effects of LLLT and of the widely used nonsteroidal anti-inflammatory drug, diclofe...

    journal_title：Journal of the mechanical behavior of biomedical materials

    pub_type： 杂志文章

    doi：10.1016/j.jmbbm.2013.08.028

    authors： Marcos RL,Arnold G,Magnenet V,Rahouadj R,Magdalou J,Lopes-Martins RÁ

    更新日期：2014-01-01 00:00:00