Food Protein-Based Nanodelivery Systems for Hydrophobic and Poorly Soluble Compounds.

Abstract:

:The hydrophobicity of bioactive molecules poses a considerable problem in the pharmaceutical and the food industry. Using food-based protein nanocarriers is one promising way to deliver hydrophobic molecules. These types of protein possess many functional properties such as surface activity, water-binding capacity, emulsification, foaming, gelation, and antioxidant activity, as well as their incorporation in the food industry as ingredients. Besides, they express low toxicity, are less expensive compared to synthetic polymers, and are biodegradable. This review aims to give a brief overview of the recent studies done using food proteins as colloidal delivery systems for hydrophobic and poorly soluble compounds.

journal_name

AAPS PharmSciTech

journal_title

AAPS PharmSciTech

authors

Maviah MBJ,Farooq MA,Mavlyanova R,Veroniaina H,Filli MS,Aquib M,Kesse S,Boakye-Yiadom KO,Wang B

doi

10.1208/s12249-020-01641-z

subject

Has Abstract

pub_date

2020-03-09 00:00:00

pages

101

issue

3

issn

1530-9932

pii

10.1208/s12249-020-01641-z

journal_volume

21

pub_type

杂志文章,评审
  • Preparation and characterization of PEGylated amylin.

    abstract::Amylin is a pancreatic hormone that plays important roles in overall metabolism and in glucose homeostasis. The therapeutic restoration of postprandial and basal amylin levels is highly desirable for patients with diabetes who need to avoid glucose excursions. Protein conjugation with polyethylene glycol (PEG) has lon...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-013-9987-4

    authors: Guerreiro LH,Guterres MF,Melo-Ferreira B,Erthal LC,Rosa Mda S,Lourenço D,Tinoco P,Lima LM

    更新日期:2013-09-01 00:00:00

  • Sustained Release of Poorly Water-Soluble Drug from Hydrophilic Polymeric Film Sandwiched Between Hydrophobic Layers.

    abstract::This proof-of-concept study explores the feasibility of using a drug-loaded hydrophilic polymeric layer sandwiched between two hydrophobic layers for improving film drug load while achieving sustained release of poorly water-soluble drug. Such films having total thickness in range ~ 146-250 μm were prepared by slurry-...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-018-1089-x

    authors: Kevadiya BD,Zhang L,Davé RN

    更新日期:2018-08-01 00:00:00

  • Experimental Aspects of Measuring the Vial Heat Transfer Coefficient in Pharmaceutical Freeze-Drying.

    abstract::One of the current methods for cycle optimization in primary drying to is develop a graphical design space based on quality by design (QbD). In order to construct the design space, the vial heat transfer coefficient (Kv) is needed. This paper investigated experimental factors that can affect the Kv result, examined th...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-018-0998-z

    authors: Wegiel LA,Ferris SJ,Nail SL

    更新日期:2018-05-01 00:00:00

  • Effect of hydrocarbon chain length in 1,2-alkanediols on percutaneous absorption of metronidazole: toward development of a general vehicle for controlled release.

    abstract::The objective of the present study is to investigate the effect of hydrocarbon chain length in 1,2-alkanediols on percutaneous absorption of metronidazole (MTZ). Twelve formulations (1,2-propanediol, 1,2-butanediol, 1,2-pentanediol, 1,2-hexanediol in 4% concentration, 1,2-hexanediol, and 1,2-heptanediol in 1% concentr...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-013-0066-7

    authors: Li N,Jia W,Zhang Y,Zhang MC,Tan F,Zhang J

    更新日期:2014-04-01 00:00:00

  • Diazepam-loaded solid lipid nanoparticles: design and characterization.

    abstract::The aim of the present study was to investigate the feasibility of the inclusion of a water-insoluble drug (diazepam, DZ) into solid lipid nanoparticles (SLNs), which offer combined advantages of rapid onset and prolonged release of the drug. This work also describes a new approach to prepare suppositories containing ...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-009-9197-2

    authors: Abdelbary G,Fahmy RH

    更新日期:2009-01-01 00:00:00

  • Interfacial Stress and Container Failure During Freezing of Bulk Protein Solutions Can Be Prevented by Local Heating.

    abstract::Bottles and carboys are used for frozen storage and transport of biopharmaceutical formulations under a wide range of conditions. The quality of freezing and thawing in these systems has been questioned due to the formation of heterogeneous ice structures and deformation of containers. This work shows that during free...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-020-01794-x

    authors: Duarte A,Rego P,Ferreira A,Dias P,Geraldes V,Rodrigues MA

    更新日期:2020-09-01 00:00:00

  • Physicochemical investigations and stability studies of amorphous gliclazide.

    abstract::Gliclazide (GLI), a poorly water-soluble antidiabetic, was transformed into a glassy state by melt quench technique in order to improve its physicochemical properties. Chemical stability of GLI during formation of glass was assessed by monitoring thin-layer chromatography, and an existence of amorphous form was confir...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-012-9760-0

    authors: Jondhale S,Bhise S,Pore Y

    更新日期:2012-06-01 00:00:00

  • Release behaviour of propranolol HCl from hydrophilic matrix tablets containing psyllium powder in combination with hydrophilic polymers.

    abstract::The objective of this study was to investigate the release behaviour of propranolol hydrochloride from psyllium matrices in the presence hydrophilic polymers. The dissolution test was carried out at pH 1.2 and pH 6.8. Binary mixtures of psyllium and hydroxypropyl methylcellulose (HPMC) used showed that an increase in ...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-011-9687-x

    authors: Siahi-Shadbad MR,Asare-Addo K,Azizian K,Hassanzadeh D,Nokhodchi A

    更新日期:2011-12-01 00:00:00

  • Multimodal particle size distributions emitted from HFA-134a solution pressurized metered-dose inhalers.

    abstract::The purpose of this research was to investigate the measurement and in vitro delivery implications of multimodal distributions, occurring near or in the respirable range, emitted from pressurized metered-dose inhalers (pMDIs). Particle size distributions of solution pMDIs containing hydrofluoroalkane-134a (HFA-134a) a...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/pt040338

    authors: Smyth HD,Hickey AJ

    更新日期:2003-01-01 00:00:00

  • Effects of the Preparation Process on the Properties of Amorphous Solid Dispersions.

    abstract::The use of amorphous solid dispersions to improve the bioavailability of active ingredients from the BCS II and IV classifications continues to gain interest in the pharmaceutical industry. Over the last decade, methods for generating amorphous solid dispersions have been well established in commercially available pro...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章,评审

    doi:10.1208/s12249-017-0861-7

    authors: Huang S,Williams RO 3rd

    更新日期:2018-07-01 00:00:00

  • Design and in vitro evaluation of capsaicin transdermal controlled release cubic phase gels.

    abstract::The purpose of this study was to design and investigate the transdermal controlled release cubic phase gels containing capsaicin using glycerol monooleate (MO), propylene glycol (1,2-propanediol, PG), and water. Three types of cubic phase gels were designed based on the ternary phase diagram of the MO-PG-water system,...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-010-9481-1

    authors: Peng X,Wen X,Pan X,Wang R,Chen B,Wu C

    更新日期:2010-09-01 00:00:00

  • Development of spray dried liposomal dry powder inhaler of Dapsone.

    abstract::This investigation was undertaken to evaluate practical feasibility of site specific pulmonary delivery of liposomal encapsulated Dapsone (DS) dry powder inhaler for prolonged drug retention in lungs as an effective alternative in prevention of Pneumocystis carinii pneumonia (PCP) associated with immunocompromised pat...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-007-9024-6

    authors: Chougule M,Padhi B,Misra A

    更新日期:2008-01-01 00:00:00

  • Investigation of the state and dynamics of water in hydrogels of cellulose ethers by 1H NMR spectroscopy.

    abstract::The aim of this work was to study the effect of the type of substituent of the cellulose ethers and the molecular mass on the state and dynamics of water in the respective hydrogels to specify the quantity of adsorbed water on the polymers or, more explicitly, to calculate the average number of water molecules bound t...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/pt030436

    authors: Baumgartner S,Lahajnar G,Sepe A,Kristl J

    更新日期:2002-01-01 00:00:00

  • Liquid proliposomes of nimodipine drug delivery system: preparation, characterization, and pharmacokinetics.

    abstract::To investigate the possibility of liquid proliposomes being carriers for oral delivery, nimodipine liquid proliposomes-based soft capsules (NPSC) were prepared. Nimodipine proliposomes were characterized by transmission electron microscopy (TEM), conversion rate from proliposomes to liposomes, entrapment efficiency, p...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-013-9924-6

    authors: Sun C,Wang J,Liu J,Qiu L,Zhang W,Zhang L

    更新日期:2013-03-01 00:00:00

  • Stage 2 Process Performance Qualification (PPQ): a Scientific Approach to Determine the Number of PPQ Batches.

    abstract::The approach documented in this article reviews data from earlier process validation lifecycle stages with a described statistical model to provide the "best estimate" on the number of process performance qualification (PPQ) batches that should generate sufficient information to make a scientific and risk-based decisi...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章,评审

    doi:10.1208/s12249-015-0409-7

    authors: Pazhayattil A,Alsmeyer D,Chen S,Hye M,Ingram M,Sanghvi P

    更新日期:2016-08-01 00:00:00

  • Preparation and characterization of poly(D,L-lactide-co-glycolide) microspheres for controlled release of human growth hormone.

    abstract::The purpose of this research was to assess the physicochemical properties of a controlled release formulation of recombinant human growth hormone (rHGH) encapsulated in poly(D,L-lactide-co-glycolide) (PLGA) composite microspheres. rHGH was loaded in poly(acryloyl hydroxyethyl) starch (acHES) microparticles, and then t...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/pt040228

    authors: Capan Y,Jiang G,Giovagnoli S,Na KH,DeLuca PP

    更新日期:2003-01-01 00:00:00

  • A novel nanoparticle formulation for sustained paclitaxel delivery.

    abstract:PURPOSE:To develop a novel nanoparticle drug delivery system consisting of chitosan and glyceryl monooleate (GMO) for the delivery of a wide variety of therapeutics including paclitaxel. METHODS:Chitosan/GMO nanoparticles were prepared by multiple emulsion (o/w/o) solvent evaporation methods. Particle size and surface...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-008-9063-7

    authors: Trickler WJ,Nagvekar AA,Dash AK

    更新日期:2008-01-01 00:00:00

  • Comparison of the halving of tablets prepared with eccentric and rotary tablet presses.

    abstract::The aim of this study was to compare the densification of powder mixtures on eccentric and rotary tablet presses and to establish relationships with the halving properties of the resulting scored tablets. This is an important problem because the recent guidelines of EU require verification of the equal masses of table...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-009-9225-2

    authors: Sovány T,Kása P Jr,Pintye-Hódi K

    更新日期:2009-01-01 00:00:00

  • Measurement of fluid viscosity at microliter volumes using quartz impedance analysis.

    abstract::The purpose of this work was to measure viscosity of fluids at low microliter volumes by means of quartz crystal impedance analysis. To achieve this, a novel setup was designed that allowed for measurement of viscosity at volumes of 8 to 10 microL. The technique was based on the principle of electromechanical coupling...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/pt050347

    authors: Saluja A,Kalonia DS

    更新日期:2004-08-05 00:00:00

  • In Vivo Evaluation of Taste-Masked Fast-Disintegrating Sublingual Tablets of Epinephrine Microcrystals.

    abstract::In community settings, IM injection of 0.3 mg epinephrine (Epi) using an auto-injector is the drug of choice for treatment of anaphylaxis. Previously, a taste-masking (TM) formulation of fast-disintegrating sublingual tablets (FDSTs) was developed in our lab. Also, Epi was micronized (Epi-MC) successfully and reduced ...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-018-1171-4

    authors: Rachid O,Simons KJ,Rawas-Qalaji M

    更新日期:2018-11-01 00:00:00

  • Use of Risk Assessment and Plackett-Burman Design for Developing Resveratrol Spray-Dried Emulsions: a Quality-by-Design Approach.

    abstract::In this study, the resveratrol spray-dried emulsions were developed using a quality-by-design approach. Further, the product and process factors that affected the quality of the spray-dried emulsions were analyzed and illustrated using an Ishikawa diagram. The product and process risks were prioritized using a risk-ra...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-018-1220-z

    authors: Benjasirimongkol P,Piriyaprasarth S,Moribe K,Sriamornsak P

    更新日期:2018-12-18 00:00:00

  • Characterization and in vitro drug release studies of a natural polysaccharide Terminalia catappa gum (Badam gum).

    abstract::The main objective of the present study is the physicochemical characterization of naturally available Terminalia catappa gum (Badam gum [BG]) as a novel pharmaceutical excipient and its suitability in the development of gastroretentive floating drug delivery systems (GRFDDS) to retard the drug for 12 h when the dosag...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-012-9873-5

    authors: Meka VS,Nali SR,Songa AS,Kolapalli VR

    更新日期:2012-12-01 00:00:00

  • Self-nanoemulsifying drug delivery system of nifedipine: impact of hydrophilic-lipophilic balance and molecular structure of mixed surfactants.

    abstract::A simple but novel mixed surfactant system was designed to fabricate a self-nanoemulsifying drug delivery system (SNEDDS) based on hydrophilic-lipophilic balance (HLB) value. The impacts of HLB and molecular structure of surfactants on the formation of SNEDDS were investigated. After screening various oils and surfact...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-014-0078-y

    authors: Weerapol Y,Limmatvapirat S,Nunthanid J,Sriamornsak P

    更新日期:2014-04-01 00:00:00

  • Preparation and In Vitro-In Vivo Evaluation of Sustained-Release Matrix Pellets of Capsaicin to Enhance the Oral Bioavailability.

    abstract::Capsaicin has multiple pharmacological activities including antioxidant, anticancer, and anti-inflammatory activities. However, its clinical application is limited due to its poor aqueous solubility, gastric irritation, and low oral bioavailability. This research was aimed at preparing sustained-release matrix pellets...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-015-0352-7

    authors: Zhang Y,Huang Z,Omari-Siaw E,Lu S,Zhu Y,Jiang D,Wang M,Yu J,Xu X,Zhang W

    更新日期:2016-04-01 00:00:00

  • Preparation and characterization of polyvinyl alcohol-gelatin hydrogel membranes for biomedical applications.

    abstract::The purpose of this research was to design and develop hydrogels by esterification of polyvinyl alcohol (PVA) with gelatin. The membranes were characterized by Fourier Transform Infrared (FTIR) spectroscopy, x-ray diffraction (XRD), and differential scanning calorimetry. The viscosity of the esterified product (as sol...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/pt080121

    authors: Pal K,Banthia AK,Majumdar DK

    更新日期:2007-03-16 00:00:00

  • Artemisia arborescens L essential oil-loaded solid lipid nanoparticles for potential agricultural application: preparation and characterization.

    abstract::The aim of this study was to formulate a new delivery system for ecological pesticides by the incorporation of Artemisia arborescens L essential oil into solid lipid nanoparticles (SLN). Two different SLN formulations were prepared following the high-pressure homogenization technique using Compritol 888 ATO as lipid a...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/pt070102

    authors: Lai F,Wissing SA,Müller RH,Fadda AM

    更新日期:2006-01-03 00:00:00

  • Development of a Prolonged-Release Pramipexole Transdermal Patch: In Vitro and In Vivo Evaluation.

    abstract::The current study aimed to develop a prolonged-release pramipexole (PPX) transdermal patch for the treatment of Parkinson's disease. Permeation parameters of PPX were investigated using human cadaver skin. Pramipexole patches were prepared using DURO-TAK® pressure-sensitive-adhesive (PSA) and evaluated for drug stabil...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-016-0555-6

    authors: Pu T,Li X,Sun Y,Ding X,Pan Y,Wang Q

    更新日期:2017-04-01 00:00:00

  • Assessment Methodology for Process Validation Lifecycle Stage 3A.

    abstract::The paper introduces evaluation methodologies and associated statistical approaches for process validation lifecycle Stage 3A. The assessment tools proposed can be applied to newly developed and launched small molecule as well as bio-pharma products, where substantial process and product knowledge has been gathered. T...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章,评审

    doi:10.1208/s12249-016-0641-9

    authors: Sayeed-Desta N,Pazhayattil AB,Collins J,Chen S,Ingram M,Spes J

    更新日期:2017-07-01 00:00:00

  • Self-microemulsifying Drug Delivery System for Improved Oral Delivery of Limonene: Preparation, Characterization, in vitro and in vivo Evaluation.

    abstract::The current investigation aimed at formulating self-microemulsifying drug delivery system (SMEDDS) to ameliorate oral bioavailability of a hydrophobic functional ingredient, limonene. Solubility test, compatibility test, and pseudo-ternary phase diagrams (PTPD) were adopted to screen the optimal compositions of limone...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-019-1361-8

    authors: Zhu Y,Xu W,Zhang J,Liao Y,Firempong CK,Adu-Frimpong M,Deng W,Zhang H,Yu J,Xu X

    更新日期:2019-03-26 00:00:00

  • Prediction of Dissolution of Sustained Release Coated Ciprofloxacin Beads Using Near-infrared Spectroscopy and Process Parameters: a Data Fusion Approach.

    abstract::The aim of the work is to develop a data fusion model using near-infrared (NIR) and process parameters for the predictions of drug dissolution from controlled release multiparticulate beads. Using a design of experiments, ciprofloxacin-coated beads were manufactured and critical process parameters such as air volume, ...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-019-1401-4

    authors: Ibrahim A,Kothari BH,Fahmy R,Hoag SW

    更新日期:2019-06-18 00:00:00