Abstract:
:Dicalcium phosphate cements (brushite and monetite) are resorbable biomaterials with osteoconductive potential for bone repair and regeneration that have yet to gain widespread commercial use. Brushite can be converted to monetite by heat treatments additionally resulting in various changes in the physico-chemical properties. However, since conversion is most commonly performed using autoclave sterilisation (wet heating), it is uncertain whether the properties observed for monetite as a result of heating brushite under dry conditions affect resorption and bone formation favourably. This study was designed to produce monetite grafts of differing physical form by autoclaving and dry heating (under vacuum) to be compared with brushite biomaterials in an orthotopic pre-clinical implantation model in rabbit for 12weeks. It was observed that monetite grafts had higher porosity and specific surface area than their brushite precursors. The autoclaved monetite grafts had compressive strength reduced by 50% when compared with their brushite precursors. However, the dry heat converted monetite grafts had compressive strength comparable with brushite. Results from in vivo experiments revealed that both types of monetite graft materials resorbed faster than brushite and more bone formation was achieved. There was no significant difference in the amount of bone formed between the two types of monetite grafts. The implanted brushite grafts underwent phase transformation to form hydroxyapatite, which ultimately limited bioresorption. However, this was not observed in both types of monetite grafts. In summary, both autoclaving and dry heating the preset brushite cement grafts resulted in monetite biomaterials which were more resorbable with potential to be investigated and optimized for orthopaedic and maxillofacial bone repair and regeneration applications. STATEMENT OF SIGNIFICANCE:We present in this original research article a comparison between dicalcium phosphate cement based grafts (brushite and 2 types of monetite grafts prepared by wet and dry thermal processing) with regards to resorption and bone formation in vivo after orthotopic implantation in rabbit condylar femural region. To the best of our knowledge this is the first in vivo study that reports a comparison resorption and bone formation using brushite and two types of monetite biomaterials. Also, we have included in the manuscript a summary of all the in vivo studies performed on brushite and monetite biomaterials to date. This includes cement composition, physical properties (porosity and surface area), implantation and histomorphometrical details such as animal species, site of implantation, observation period, percentage bone tissue formation and residual graft material. In addition, we calculated the percentage resorption of graft materials based upon various implantation sites and included that into the discussion section. The results of this original research provides greater understanding of the resorption processes of dicalcium phosphate based grafts, allowing preparation of bone substitute materials with more predictable resorption profiles in future.
journal_name
Acta Biomaterjournal_title
Acta biomaterialiaauthors
Sheikh Z,Zhang YL,Tamimi F,Barralet Jdoi
10.1016/j.actbio.2017.02.022subject
Has Abstractpub_date
2017-04-15 00:00:00pages
526-535eissn
1742-7061issn
1878-7568pii
S1742-7061(17)30127-7journal_volume
53pub_type
杂志文章abstract::The transfer of nucleic acids into living cells, i.e. transfection, is a major technique in current molecular biology and medicine. As nucleic acids alone are not able to penetrate the cell membrane, an efficient carrier is needed. Calcium phosphate nanoparticles can serve as carrier due to their biocompatibility, bio...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2018.11.051
更新日期:2019-01-15 00:00:00
abstract::Zinc (Zn) alloys have been considered as promising absorbable metals, mainly due to their moderate degradation rates ranging between magnesium alloys and iron alloys. The degradation behavior depends on the specific physiological environment. Released metallic ions and corrosion products directly influence biocompatib...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2019.03.013
更新日期:2019-10-15 00:00:00
abstract::We have developed a class of peptide amphiphile (PA) molecules that self-assemble into three-dimensional nanofiber networks under physiological conditions in the presence of polyvalent metal ions. The assembly can be triggered by adding PA solutions to cell culture media or other synthetic physiological fluids contain...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2005.04.002
更新日期:2005-07-01 00:00:00
abstract::Surgical meshes are effective and frequently used to reinforce soft tissues. Fibrin glue (FG) has been widely used for mesh fixation and is also considered an optimal vehicle for stem cell delivery. The aim of this preclinical study was to evaluate the therapeutic effect of MSCs and their exosomes combined with FG for...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2018.02.014
更新日期:2018-04-15 00:00:00
abstract::To search for potential non-viral nucleic acids carriers, a series of novel cationic polymers, multi-armed poly(aspartate-graft-oligoethylenimine) (MP-g-OEI) copolymers were designed and synthesized by grafting different types of oligoethylenimine (OEI) to a multi-armed poly(l-aspartic acid) backbone. The as-synthesiz...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2013.02.007
更新日期:2013-06-01 00:00:00
abstract::We have characterized the in vitro and in vivo extracellular neural recording and stimulation properties of ruthenium oxide (RuOx) based microelectrodes. Cytotoxicity and functional neurotoxicity assays were carried out to confirm the in vitro biocompatibility of RuOx. Material extract assays, in accordance to ISO pro...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2019.10.040
更新日期:2020-01-01 00:00:00
abstract::We here present the first successful report on combining nanostructured silk and poly(ε-caprolactone) (PCL) with a ceramic scaffold to produce a composite scaffold that is highly porous (porosity ∼85%, pore size ∼500 μm, ∼100% interconnectivity), strong and non-brittle with a surface that resembles extracellular matri...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2011.10.009
更新日期:2012-01-01 00:00:00
abstract::With the aim of minimizing thrombus formation in blood-contacting devices, tissue plasminogen activator (t-PA)-containing polyurethane (PU) materials have been developed. Cationic PU surfaces were prepared by grafting poly(dimethylaminoethyl methacrylate) and quaternizing the tertiary amino groups with iodomethane or ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2011.01.026
更新日期:2011-05-01 00:00:00
abstract::To improve the corrosion resistance and biological performance of commercially pure titanium (cp-Ti) substrates, potassium hydroxide was employed to modify the surfaces of titanium substrates, followed by biomimetic deposition of apatite on the substrates in a simulated body fluid. The morphologies of native and treat...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2009.11.034
更新日期:2010-06-01 00:00:00
abstract::Surgical and interventional therapies for atherosclerotic lesions of the infrainguinal arteries are notorious for high rates of failure. Frequently, this leads to expensive reinterventions, return of disabling symptoms or limb loss. Interaction between the artery and repair material likely plays an important role in r...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2013.12.027
更新日期:2014-03-01 00:00:00
abstract::A series of poly(2-hydroxyethyl methacrylate) (pHEMA) hydrogels containing cross-linked β-cyclodextrin-hyaluronan (β-CD-crHA), with tear protein adsorption resistance and sustained drug delivery, were developed as contact lens materials for eye diseases. β-CD-HA was synthesized from aminated β-CD and HA and then cross...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2020.04.002
更新日期:2020-07-01 00:00:00
abstract::The aim of the present study was to evaluate the biocompatibility and bone mineralization potential of 45S5 Bioglass-derived glass-ceramic scaffolds using a chick embryo shell-less (ex ovo) culture system. Chick embryos were divided into two groups: control (C) and experimental (E). Scaffolds were placed on the chorio...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2008.07.016
更新日期:2009-01-01 00:00:00
abstract::Chronically implanted neural multi-electrode arrays (MEA) are an essential technology for recording electrical signals from neurons and/or modulating neural activity through stimulation. However, current MEAs, regardless of the type, elicit an inflammatory response that ultimately leads to device failure. Traditionall...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2017.02.010
更新日期:2017-04-15 00:00:00
abstract::Spatiotemporally controlled release of growth factors (GFs) is critical for regenerative processes such as angiogenesis. A common strategy is to encapsulate the GF within hydrogels, with release being controlled via diffusion and/or gel degradation (i.e., hydrolysis and/or proteolysis). However, simple encapsulation s...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2016.09.026
更新日期:2016-12-01 00:00:00
abstract::Semiconducting nanoparticles, more commonly known as quantum dots, possess unique size and shape dependent optoelectronic properties. In recent years, these unique properties have attracted much attention in the biomedical field to enable real-time tissue imaging (bioimaging), diagnostics, single molecule probes, and ...
journal_title:Acta biomaterialia
pub_type: 杂志文章,评审
doi:10.1016/j.actbio.2019.05.022
更新日期:2019-08-01 00:00:00
abstract::Strategies to design effective and safe colloidal carriers for biopharmaceuticals have evolved through applying the knowledge gained in nanotechnology to medicine. Designing a colloidal carrier to serve as a protein delivery device requires an understanding of the effect of different materials on the physicochemical, ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2009.03.007
更新日期:2009-09-01 00:00:00
abstract::The aim of this study was to evaluate the biological behaviour of porous scaffold structures of Bonelike which is suitable for either direct clinical use or tissue engineering applications. Porous cylindrical specimens 8x10mm were implanted in the lateral aspect of the tibia of 13 patients (mean age 54 years), during ...
journal_title:Acta biomaterialia
pub_type: 临床试验,杂志文章
doi:10.1016/j.actbio.2007.06.009
更新日期:2008-03-01 00:00:00
abstract::In the present study, the density functional theory implemented in the Vienna Ab-initio Simulation Package has been used to investigate the alloying effects of different elements of calcium, zinc, yttrium, aluminum and iron when introduced in the Mg crystal lattice. In particular, studies have been conducted to invest...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2009.08.016
更新日期:2010-05-01 00:00:00
abstract::Using novel nitric oxide (NO)-generating polymeric hydrogels that can be rapidly photopolymerized in situ, we can deliver NO locally at the site of vascular injury. Depending on material design, these poly(ethylene glycol) (PEG)-based hydrogels can generate NO for up to 50 d. This study demonstrates the ability of nit...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2005.07.010
更新日期:2005-11-01 00:00:00
abstract::Atomic force microscopy (AFM) was used to study the morphological changes of two gram-negative pathogens, Pseudomonas aeruginosa and Escherichia coli, after exposure to nitric oxide (NO). The time-dependent effects of NO released from a xerogel coating and the concentration-dependent effects rendered by a small molecu...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2009.01.025
更新日期:2009-06-01 00:00:00
abstract::The understanding of adhesive interaction at the nanoscale between functionalized nanoparticles and biological cells is of great importance to develop effective theranostic nanocarriers for targeted cancer therapy. Here, we report a combination of experimental and computational approaches to evaluate the adhesion betw...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2018.02.011
更新日期:2018-04-15 00:00:00
abstract::Decellularized extracellular matrix (ECM) derived from stem cells has been shown as a promising biomaterial for bone regeneration because of the promotion effect on osteogenesis in mesenchymal stem cells (MSCs). However, bone regeneration is also influenced by bone resorption and little is known about the effect of ce...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2018.03.003
更新日期:2018-04-15 00:00:00
abstract::Titanium oxide coatings have been shown to exhibit desirable properties as biocompatible coatings. We report on the quantitative microstructure characterization and deformation behavior of TiO(2) nanotubes on Ti substrate. Nanotubes were processed using anodic oxidation of Ti in a NaF electrolyte solution. Characteriz...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2006.08.004
更新日期:2007-05-01 00:00:00
abstract::Novel Mg-Zr-Sr alloys have recently been developed for use as biodegradable implant materials. The Mg-Zr-Sr alloys were prepared by diluting Mg-Zr and Mg-Sr master alloys with pure Mg. The impact of Zr and Sr on the mechanical and biological properties has been thoroughly examined. The microstructures and mechanical p...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2012.04.028
更新日期:2012-08-01 00:00:00
abstract::Tendon pathology is associated with damage. While tendon damage is likely initiated by mechanical loading, little is known about the specific etiology. Damage is defined as an irreversible change in the microstructure that alters the macroscopic mechanical parameters. In tendon, the link between mechanical loading and...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2017.04.011
更新日期:2017-07-15 00:00:00
abstract::Tissue-derived extracellular matrix (ECM) biomaterials to regenerate the meniscus have gained increasing attention in treating meniscus injuries and diseases, particularly for aged persons and athletes. However, ECM scaffold has poor cell infiltration and can only be implanted using surgical procedures. To overcome th...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2015.01.027
更新日期:2015-04-01 00:00:00
abstract::Besides functional and cross-linking monomers, dental adhesives contain a photo-initiator system for polymerization, thereby providing physico-mechanical strength to the adhesive-tooth interface. Few studies have investigated the effect of the functional monomer and polymerization-initiation system on the polymerizati...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2012.01.013
更新日期:2012-05-01 00:00:00
abstract::When a balloon-angioplasty is performed, the arterial wall is overstretched and thereby damaged, which leads to a stiffness reduction in the arterial layers. An anisotropic damage model able to reflect the main damage mechanisms in overstretched arterial walls is used in combination with a polyconvex hyperelastic stor...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2006.06.005
更新日期:2006-11-01 00:00:00
abstract::The poor delivery of nanoparticles to target cancer cells hinders their success in the clinical setting. In this work, an alternative target readily available for circulating nanoparticles has been selected to eliminate the need for nanoparticle penetration in the tissue: the tumor blood vessels. A tumor endothelium-t...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2019.11.004
更新日期:2020-01-01 00:00:00
abstract::The management of diabetic wounds remains a major therapeutic challenge in clinics. Herein, we report a personalized treatment using 3D scaffolds consisting of radially or vertically aligned nanofibers in combination with bone marrow mesenchymal stem cells (BMSCs). The 3D scaffolds have customizable sizes, depths, and...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2020.03.035
更新日期:2020-05-01 00:00:00